Console does not use full screen

This is a fresh Leap42.1 install on a optiplex 745, with Radeon a 66xx card.

The console is using a frame buffer driver/device, its resolution is 1600x1200 (the max that my monitor can handle), but somehow it is not using the full screen.
I try to link a photo that I’ve made.

I would appreciate some directions in where to go to fix this. I want to console to be full screen…

Thanks in advance.

Frame buffer device drivers do not have that res. Can you give all the numbers for the card?

Yes, sure. How? :smiley:

Something I remember. Like vga=ask?
This used to be in lilo.conf…
Not sure how to do it nowdays…

optiplex-745:/home/toma # hwinfo --framebuffer
02: None 00.0: 11001 VESA Framebuffer                           
  [Created at bios.459]
  Unique ID: rdCR.x9mbrolCBkF
  Hardware Class: framebuffer
  Model: "(C) 1988-2010, AMD TURKS"
  Vendor: "(C) 1988-2010, AMD Technologies Inc."
  Device: "TURKS"
  SubVendor: "AMD ATOMBIOS"
  Revision: "01.00"
  Memory Size: 16 MB
  Memory Range: 0xd0000000-0xd0ffffff (rw)
  Mode 0x0300: 640x400 (+640), 8 bits
  Mode 0x0301: 640x480 (+640), 8 bits
  Mode 0x0303: 800x600 (+832), 8 bits
  Mode 0x0305: 1024x768 (+1024), 8 bits
  Mode 0x0307: 1280x1024 (+1280), 8 bits
  Mode 0x0310: 640x480 (+1280), 15 bits
  Mode 0x0311: 640x480 (+1280), 16 bits
  Mode 0x0313: 800x600 (+1600), 15 bits
  Mode 0x0314: 800x600 (+1600), 16 bits
  Mode 0x0316: 1024x768 (+2048), 15 bits
  Mode 0x0317: 1024x768 (+2048), 16 bits
  Mode 0x0319: 1280x1024 (+2560), 15 bits
  Mode 0x031a: 1280x1024 (+2560), 16 bits
  Mode 0x030d: 320x200 (+640), 15 bits
  Mode 0x030e: 320x200 (+640), 16 bits
  Mode 0x0320: 320x200 (+1280), 24 bits
  Mode 0x0393: 320x240 (+320), 8 bits
  Mode 0x0395: 320x240 (+640), 16 bits
  Mode 0x0396: 320x240 (+1280), 24 bits
  Mode 0x03b3: 512x384 (+512), 8 bits
  Mode 0x03b5: 512x384 (+1024), 16 bits
  Mode 0x03b6: 512x384 (+2048), 24 bits
  Mode 0x03c3: 640x350 (+640), 8 bits
  Mode 0x03c5: 640x350 (+1280), 16 bits
  Mode 0x03c6: 640x350 (+2560), 24 bits
  Mode 0x0333: 720x400 (+768), 8 bits
  Mode 0x0335: 720x400 (+1472), 16 bits
  Mode 0x0336: 720x400 (+2944), 24 bits
  Mode 0x0353: 1152x864 (+1152), 8 bits
  Mode 0x0355: 1152x864 (+2304), 16 bits
  Mode 0x0356: 1152x864 (+4608), 24 bits
  Mode 0x0363: 1280x960 (+1280), 8 bits
  Mode 0x0365: 1280x960 (+2560), 16 bits
  Mode 0x0366: 1280x960 (+5120), 24 bits
  Mode 0x0321: 640x480 (+2560), 24 bits
  Mode 0x0322: 800x600 (+3200), 24 bits
  Mode 0x0323: 1024x768 (+4096), 24 bits
  Mode 0x0324: 1280x1024 (+5120), 24 bits
  Mode 0x0343: 1400x1050 (+1408), 8 bits
  Mode 0x0345: 1400x1050 (+2816), 16 bits
  Mode 0x0346: 1400x1050 (+5632), 24 bits
  Mode 0x0373: 1600x1200 (+1600), 8 bits
  Mode 0x0375: 1600x1200 (+3200), 16 bits
  Mode 0x0376: 1600x1200 (+6400), 24 bits
  Config Status: cfg=no, avail=yes, need=no, active=unknown

Is this the list?

That only applies to the vesa framerbuffer driver (vesafb). Given the info from your other thread (in relation to setting the proper resolution in an X environment), you’re system should be using the radeondrmfb driver (its embedded within the radeon kms/drm kernel driver).
A very quick way of determining that is with:

cat /proc/fb

And a very quick way of determining what mode it (the framebuffer driver) is utilising is by running:

cat /sys/class/graphics/fb0/modes

hwinfo --framebuffer

That will only show the vesa modes that your video adapter’s bios supports (for the initial video access … like by GRUB or legacy framebuffer drivers (like vesafb)).

On the other hand,

# hwinfo --vbe | grep Mode

will also show what vesa mode the framebuffer is currently being driven at … as well as the same info about what modes the adapter’s bios supports.

Just a random thought (which I don’t think will impact, but its worth investigating), turn off the splash=verbose you set and put it back to silent.