Hello,
I’ve have a strange problem, my laptop is not able to connect to the hotspot of my Blackberry directly, if it is already connected to another SSID and switch it via network manager to the Hotspot it is able to connect…
It is not a soradic issue, I can reproduce it all the time, if I tell network manager to disconnect from the old SSID and then to connect to the Hotspot is not working, too, only at a switch of the SSID without a disconnect.
Other devices are able to connect to it without any Problem and the laptop is able to connect all tested SSIDs except the Hotspot of my Blackberry…
Technical details:
Blackberry Z30
tested with OS 10.2 and 10.3 (current 10.3.0.1052 WLAN Version 1.1)
Laptop:
Dell Latidude E7240
Kernel: 3.17.0-50.gc467423-desktop (as I’m using tumbleweed repo, it is updated often enough)
Wireless card (from lspci -vv):
02:00.0 Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
Subsystem: Dell Device 0208
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=512]
Expansion ROM at f7d80000 [disabled] [size=64]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/4 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [70] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR-, OBFF Not Supported
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00
Kernel driver in use: ath9k
Kernel modules: ath9k
Dmesg output with unsuccessful connections, and a successful after ssid switch without disconnect
911.496232] wlp2s0: authenticate with 48:9d:24:8b:62:2b
911.509863] wlp2s0: send auth to 48:9d:24:8b:62:2b (try 1/3)
911.511674] wlp2s0: authenticated
911.512059] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), disabling WMM
911.512443] wlp2s0: associate with 48:9d:24:8b:62:2b (try 1/3)
911.526561] wlp2s0: RX AssocResp from 48:9d:24:8b:62:2b (capab=0x431 status=12 aid=0)
911.526572] wlp2s0: 48:9d:24:8b:62:2b denied association (code=12)
922.585223] wlp2s0: authenticate with 48:9d:24:8b:62:2b
922.599958] wlp2s0: send auth to 48:9d:24:8b:62:2b (try 1/3)
922.602082] wlp2s0: authenticated
922.602510] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), disabling WMM
922.603459] wlp2s0: associate with 48:9d:24:8b:62:2b (try 1/3)
922.605847] wlp2s0: RX AssocResp from 48:9d:24:8b:62:2b (capab=0x431 status=12 aid=0)
922.605869] wlp2s0: 48:9d:24:8b:62:2b denied association (code=12)
933.665899] wlp2s0: authenticate with 48:9d:24:8b:62:2b
933.681455] wlp2s0: send auth to 48:9d:24:8b:62:2b (try 1/3)
933.683014] wlp2s0: authenticated
933.683506] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), disabling WMM
933.684509] wlp2s0: associate with 48:9d:24:8b:62:2b (try 1/3)
933.686937] wlp2s0: RX AssocResp from 48:9d:24:8b:62:2b (capab=0x431 status=12 aid=0)
933.686961] wlp2s0: 48:9d:24:8b:62:2b denied association (code=12)
5285.340512] wlp2s0: authenticate with 48:9d:24:8b:62:2b
5285.354474] wlp2s0: send auth to 48:9d:24:8b:62:2b (try 1/3)
5285.355941] wlp2s0: authenticated
5285.356035] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), disabling WMM
5285.356416] wlp2s0: associate with 48:9d:24:8b:62:2b (try 1/3)
5285.359067] wlp2s0: RX AssocResp from 48:9d:24:8b:62:2b (capab=0x431 status=0 aid=1)
5285.359187] wlp2s0: associated
Thanks in Advance for your help
Karsten[/size][/size]