Conceptronic USB2.0 DVB-T CTVDIGRCU V3.0 kernel modules

Hi,
I need a helping hand with compiling the kernel modules for the Conceptronic USB2.0 DVB-T CTVDIGRCU V3.0 stick. From what I found here:
~anttip/af9015: changeset 11448:d4274bbb8605](http://linuxtv.org/hg/~anttip/af9015/rev/d4274bbb8605)
the stick seems now supported; so I fetched the current source code from there, and gave it a try. I got 2 of 3 needed modules compiled so far, that are the dvb-usb-af9015.o and mc44s803.o, but the 3rd module, the AF9013 driver, fails because it depends on v4l. I did install the v4l-devel package, but that didnt make a difference.
Sorry, but I’m a newbie to 2.6 kernel build, and also specially with this video media stuff…
my current kernel is 2.6.27.21-0.1-default x86_64. Perhaps someone who’s more familar with the kernel build stuff can give this a try, and provide compiled modules? That would be very great…

thanks, Guen.

ok, due lack of reply now learned how to do it, and hey rotfl! sometimes things can be that simple!!
All that was necessary was a make && make install (attention: this overwrites a couple of existing modules, so probably a good idea to first save your old modules) in the root directory of the archive I downloaded from the link I mentioned before already:
http://linuxtv.org/hg/~anttip/af9015/archive/tip.tar.gz
the needed firmware can be downloaded from here:
http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/dvb-usb-af9015.fw
copy the firmware to the /lib/firmware/ folder, then as root do a

modprobe dvb-usb-af9015

and check with dmesg that the device is properly detected and initialized, and the firmware gets loaded:

usb 1-2: new high speed USB device using ehci_hcd and address 4
usb 1-2: configuration #1 chosen from 1 choice
usb 1-2: New USB device found, idVendor=1b80, idProduct=e397
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: DVB-T 2
usb 1-2: Manufacturer: Afatech
dvb_usb_af9015: Unknown symbol dvb_usb_device_init
dvb_usb_af9015: Unknown symbol dvb_usb_device_exit
af9015: command failed:170
dvb-usb: found a 'Conceptronic USB2.0 DVB-T CTVDIGRCU V3.0' in cold state, will try to load a firmware
firmware: requesting dvb-usb-af9015.fw
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
dvb-usb: found a 'Conceptronic USB2.0 DVB-T CTVDIGRCU V3.0' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Conceptronic USB2.0 DVB-T CTVDIGRCU V3.0)
af9013: firmware version:4.95.0
DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
tda18271 1-00c0: creating new instance
TDA18271HD/C1 detected @ 1-00c0
dvb-usb: Conceptronic USB2.0 DVB-T CTVDIGRCU V3.0 successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_af9015

as you can see I still get two unresolved symbols - not sure if this is related to the missing remote control support, but nevertheless the beast is working fine with Kaffeine.
Onto remote control support :slight_smile: