Further to Malcolm’s comments about interference, I happened to note that the ‘usb-devices’ output that you shared shows two Logitech USB recievers plugged in concurrently…
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c534 Rev=29.01
S: Manufacturer=Logitech
S: Product=USB Receiver
C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=98mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
T: Bus=03 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c534 Rev=29.01
S: Manufacturer=Logitech
S: Product=USB Receiver
C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=98mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
If so, that might cause such strange behaviour perhaps.
deano_ferrari:
Further to Malcolm’s comments about interference, I happened to note that the ‘usb-devices’ output that you shared shows two Logitech USB recievers plugged in concurrently…
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c534 Rev=29.01
S: Manufacturer=Logitech
S: Product=USB Receiver
C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=98mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
T: Bus=03 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c534 Rev=29.01
S: Manufacturer=Logitech
S: Product=USB Receiver
C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=98mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
If so, that might cause such strange behaviour perhaps.
Hi
For sure, use solaar and pair both devices to one receiver…
I believe that I used a Logitec mouse even without a second Logitec wireless device and had the same problem.
But I decided to try an experiment: bought a power gear wireless mouse and using it now. Let’s see if the problem will recur. I will report back.
Using a unifying receiver is an interesting idea! I want to try that too!
KittyKatty:
I believe that I used a Logitec mouse even without a second Logitec wireless device and had the same problem.
But I decided to try an experiment: bought a power gear wireless mouse and using it now. Let’s see if the problem will recur. I will report back.
Using a unifying receiver is an interesting idea! I want to try that too!
That is the normal way to have a wireless mouse and keyboard connected.
On Sun 03 Feb 2019 07:56:03 AM CST, deano ferrari wrote:
KittyKatty;2893143 Wrote:
> I believe that I used a Logitec mouse even without a second Logitec
> wireless device and had the same problem.
>
> But I decided to try an experiment: bought a power gear wireless mouse
> and using it now. Let’s see if the problem will recur. I will report
> back.
>
> Using a unifying receiver is an interesting idea! I want to try that
> too!
That is the normal way to have a wireless mouse and keyboard connected.
Hi
This is also worth a read;
The Logitech Unifying Receiver is a small dedicated USB wireless receiver, based on the nRF24L-family of RF devices, that allows up to six compatible Logitech human interface devices (such as mice, trackballs, touchpads, and keyboards; headphones are not compatible) to be linked to the same computer using 2.4 GHz band radio communication. Receivers that are bundled with a Logitech product are paired with the device at the factory. When purchasing a replacement receiver or connecting multiple d Lo...
–
Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890 )
SLES 15 | GNOME Shell 3.26.2 | 4.12.14-25.25-default
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below… Thanks!