can't install xgi/sis graphics driver

English Install/Boot/Login
#1

Hi there I have a qzd netbook with opensuse 11.2 running but I cannot get the graphics working.

I have tried “startx” and get the following:

xauth: creating new authority file /root/.serverauth.4650

X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux linux-tj57 2.6.31.12-0.1-default #1 SMP 2010-01-27 08:20:11 +0100 i586
Build Date: 02 November 2009 12:05:39PM

Before reporting problems, check [X.Org Wiki - Home](http://wiki.x.org)
to make sure that you have the latest version.

Markers: (–) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: “/var/log/Xorg.0.log”, Time: Fri Mar 19 15:10:06 2010
(==) Using default built-in configuration (30 lines)
(EE) Failed to load module “xgi” (module does not exist, 0)
(EE) open /dev/fb0: No such file or directory
(EE) VESA(1): Driver can’t support depth 24
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support
at X.Org Wiki - Home
for help.
Please also check the log file at “/var/log/Xorg.0.log” for additional information.

giving up.
xinit: No such file or directory (errno 2): unable to connect to X server
xinit: No such process (errno 3): Server error.

The Xorg.0.log is in the next post.

In yast2 when I do a hardware probe it comes up with the correct display driver of XGI Volari Z9s, but although it appears to do a probe of the monitor, no monitor type appears in the list.

I have tried Thomas Winischhofer - X.org/XFree86/Linux and SiS/XGI graphics chipsets - Part 3 but when I try and download any of the files it just tries to download a file called download.cgi. This is a bit of a blind alley anyway because it only goes up to x.org 7 and i am using version 11. I have gone to sis at http://www.sis.com/download/download_step1.php and downloaded the sis650 graphics driver there (even though it says it’s for redhat. And as per the instructions of the Thomas Winischhofer site renamed it sis_drv.o and copied it to the /usr/lib/xorg/modules/drivers directory. which did not work. I also overwote the sis_drv.so file (where is that located in the rpms as I feel I need to get the original back!) and also copied it as it was originally called as sis_drv.so-410; there is a 402, but I assume they are the same file??? I have also gone to :: Welcome to XGI ::](http://www.xgitech.com) and downloaded the appropriate driver, but it only goes up to version 7.3. Any help much appreciated…

#2

X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux linux-tj57 2.6.31.12-0.1-default #1 SMP 2010-01-27 08:20:11 +0100 i586
Build Date: 02 November 2009 12:05:39PM

Before reporting problems, check [X.Org Wiki - Home](http://wiki.x.org)
to make sure that you have the latest version.

Markers: (–) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: “/var/log/Xorg.0.log”, Time: Fri Mar 19 15:10:06 2010
(II) Loader magic: 0x3ac0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(–) using VT number 8

(–) PCI:*(0:0:3:0) 18ca:0021:18ca:0020 rev 0, Mem @ 0xe8000000/67108864, 0xec000000/262144, I/O @ 0x0000e000/128, BIOS @ 0x???/32768
(==) Using default built-in configuration (30 lines)
(==) — Start of built-in configuration —
Section “Device”
Identifier “Builtin Default xgi Device 0”
Driver “xgi”
EndSection
Section “Screen”
Identifier “Builtin Default xgi Screen 0”
Device “Builtin Default xgi Device 0”
EndSection
Section “Device”
Identifier “Builtin Default fbdev Device 0”
Driver “fbdev”
EndSection
Section “Screen”
Identifier “Builtin Default fbdev Screen 0”
Device “Builtin Default fbdev Device 0”
EndSection
Section “Device”
Identifier “Builtin Default vesa Device 0”
Driver “vesa”
EndSection
Section “Screen”
Identifier “Builtin Default vesa Screen 0”
Device “Builtin Default vesa Device 0”
EndSection
Section “ServerLayout”
Identifier “Builtin Default Layout”
Screen “Builtin Default xgi Screen 0”
Screen “Builtin Default fbdev Screen 0”
Screen “Builtin Default vesa Screen 0”
EndSection
(==) — End of built-in configuration —
(==) ServerLayout “Builtin Default Layout”
() |–>Screen “Builtin Default xgi Screen 0” (0)
() | |–>Monitor “<default monitor>”
() | |–>Device “Builtin Default xgi Device 0”
(==) No monitor specified for screen “Builtin Default xgi Screen 0”.
Using a default monitor configuration.
() |–>Screen “Builtin Default fbdev Screen 0” (1)
() | |–>Monitor “<default monitor>”
() | |–>Device “Builtin Default fbdev Device 0”
(==) No monitor specified for screen “Builtin Default fbdev Screen 0”.
Using a default monitor configuration.
() |–>Screen “Builtin Default vesa Screen 0” (2)
() | |–>Monitor “<default monitor>”
() | |–>Device “Builtin Default vesa Device 0”
(==) No monitor specified for screen “Builtin Default vesa Screen 0”.
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory “/usr/share/fonts/TTF/” does not exist.
Entry deleted from font path.
(WW) The directory “/usr/share/fonts/OTF” does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/truetype/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled
(==) ModulePath set to “/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules”
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX**
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX**
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX**
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX**
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX**
(II) LoadModule: “extmod”
(II) Loading /usr/lib/xorg/modules//extensions/libextmod.so
(II) Module extmod: vendor=“X.Org Foundation”
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: “dbe”
(II) Loading /usr/lib/xorg/modules//extensions/libdbe.so
(II) Module dbe: vendor=“X.Org Foundation”
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: “glx”
(II) Loading /usr/lib/xorg/modules//extensions/libglx.so
(II) Module glx: vendor=“X.Org Foundation”
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: “record”
(II) Loading /usr/lib/xorg/modules//extensions/librecord.so
(II) Module record: vendor=“X.Org Foundation”
compiled for 1.6.5, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: “dri”
(II) Loading /usr/lib/xorg/modules//extensions/libdri.so
(II) Module dri: vendor=“X.Org Foundation”
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: “dri2”
(II) Loading /usr/lib/xorg/modules//extensions/libdri2.so
(II) Module dri2: vendor=“X.Org Foundation”
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: “xgi”
(WW) Warning, couldn’t open module xgi
(II) UnloadModule: “xgi”
(EE) Failed to load module “xgi” (module does not exist, 0)
(II) LoadModule: “fbdev”
(II) Loading /usr/lib/xorg/modules//drivers/fbdev_drv.so
(II) Module fbdev: vendor=“X.Org Foundation”
compiled for 1.6.5, module version = 0.4.1
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: “vesa”
(II) Loading /usr/lib/xorg/modules//drivers/vesa_drv.so
(II) Module vesa: vendor=“X.Org Foundation”
compiled for 1.6.5, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) FBDEV: driver for framebuffer: fbdev
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:03:0
(II) Loading sub module “fbdevhw”
(II) LoadModule: “fbdevhw”
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor=“X.Org Foundation”
compiled for 1.6.5, module version = 0.0.2
ABI class: X.Org Video Driver, version 5.0
(EE) open /dev/fb0: No such file or directory
(WW) Falling back to old probe method for fbdev
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX**
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX**
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX**
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX**
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX**
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX**
(II) Loading sub module “vbe”
(II) LoadModule: “vbe”
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor=“X.Org Foundation”
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module “int10”
(II) LoadModule: “int10”
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor=“X.Org Foundation”
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) VESA(1): initializing int10
(WW) System lacks support for changing MTRRs
(II) VESA(1): Primary V_BIOS segment is: 0xc000
(II) VESA(1): VESA BIOS detected
(II) VESA(1): VESA VBE Version 3.0
(II) VESA(1): VESA VBE Total Mem: 65472 kB
(II) VESA(1): VESA VBE OEM: XGI
(II) VESA(1): VESA VBE OEM Software Rev: 1.0
(II) VESA(1): VESA VBE OEM Vendor: XGI Technology, Inc.
(II) VESA(1): VESA VBE OEM Product: Volari Z9s
(II) VESA(1): VESA VBE OEM Product Rev: 1.11.01
(EE) VESA(1): Driver can’t support depth 24
(II) UnloadModule: “fbdev”
(II) UnloadModule: “fbdevhw”
(II) UnloadModule: “vesa”
(II) UnloadModule: “int10”
(II) Unloading /usr/lib/xorg/modules//libint10.so
(II) UnloadModule: “vbe”
(II) Unloading /usr/lib/xorg/modules//libvbe.so
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support
at X.Org Wiki - Home
for help.
Please also check the log file at “/var/log/Xorg.0.log” for additional information.************************

#3

I have also tried running sax2; both alone and with the parameters -m 0=vesa and both get the following output:

SaX: initializing please wait…
SaX: no X-Server is running
SaX: will start own server if needed

displays following message 7 times…

ISaX: could not import file: /var/cache/sax/files/config at /usr/sbin/isax line 199

then…

SPP: prepare device [0] profile: nobus
SPP: including prepared profile(s)…

SaX: startup

xc: sorry could not start configuration server
xc: for details refer to the log file:

/var/log/SaX.log

xc: abort…

The SaX.log file output is in the following post:

#4

/*************
SaX2 log : SaX2 version 8.1 - SVN Release: 1.49 2003/03/17

SVN RELEASE : 1893
:
DESCRIPTION : X11 configuration log file to collect information
: about detection, startup and configuration.
: There are three parts of logging:
: —
: 1) INIT ( detection, 3D )
: 2) STARTUP ( xorg.conf, X11 log, glxinfo )
: 3) CONFIG ( config actions )
: —
:
VERSION : SaX2 compiled for: [OTHER]
PARAMETER : -r
:
LOG DATE : Fri Mar 19 15:02:54 GMT 2010
*************/

Framebuffer Info:

Framebuffer not active

19-Mar 15:03:01 <I> Initializing…
19-Mar 15:03:06 <I> Sysp: Mouse detection data
Mouse0 => Protocol : explorerps/2
Mouse0 => Device : /dev/input/mice
Mouse0 => Buttons : 5
Mouse0 => Wheel : 1
Mouse0 => Emulate : 0
Mouse0 => Name : PS/2 Generic Mouse
Mouse0 => VendorID : 0x0002
Mouse0 => DeviceID : 0x0001
Mouse0 => Profile : <undefined>
Mouse0 => RealDevice : /dev/input/by-path/platform-i8042-serio-1-event-mouse
Mouse0 => NutShell : 0
]
19-Mar 15:03:09 <I> Sysp: Keyboard detection data
Keyboard0 => XkbModel : microsoftpro
Keyboard0 => XkbLayout : gb
Keyboard0 => Name : AT Translated Set 2 keyboard
Keyboard0 => VendorID : 0x0001
Keyboard0 => DeviceID : 0x0001
Keyboard0 => Profile : <undefined>
Keyboard0 => RealDevice : /dev/input/event0
]
19-Mar 15:03:15 <I> Sysp: Server detection data
Card0 => DomainId : 0x0
Card0 => BusId : 0x0
Card0 => SlotId : 0x03
Card0 => FuncId : 0x0
Card0 => Vendor : VESA
Card0 => Device : Vesa-BIOS Graphics
Card0 => VID : 0x18ca
Card0 => DID : 0x0021
Card0 => Module : vesa
Card0 => BusType : PCI
Card0 => Detected : 1
Card0 => Flag : DEFAULT
Card0 => SUB-VID : 0x18ca
Card0 => SUB-DID : 0x0020
Card0 => DrvProfile : <undefined>
]
19-Mar 15:03:36 <I> Sysp: XStuff detection data
Card0 => DDC : <undefined>
Card0 => Name : <undefined>
Card0 => Vendor : <undefined>
Card0 => Primary : 00-03-0
Card0 => Chipset : <undefined>
Card0 => Vsync : 60
Card0 => Hsync : 50
Card0 => Dacspeed : 220
Card0 => Modeline : <undefined>
Card0 => Memory : 4096
Card0 => RandR : <undefined>
Card0 => Current : 00-03-0
Card0 => RawDef : None
Card0 => Option : None
Card0 => Extension : None
Card0 => Module : vesa
Card0 => Display : NUL
Card0 => VesaBios : 3.0
]
19-Mar 15:03:55 <I> Sysp: 3D detection data
Card3D0 => Install : <none>
Card3D0 => Remove : <none>
Card3D0 => Packages : <none>
Card3D0 => Active : 0
Card3D0 => Answer : no
Card3D0 => ScriptReal : <none>
Card3D0 => ScriptSoft : <none>
Card3D0 => Flag : <none>
]
19-Mar 15:04:07 <X> Startup…
19-Mar 15:04:07 <X> Startup on new Server: <:0.0>
19-Mar 15:04:07 <X> Logging File contents: /tmp/sax2-4618/xorg.conf
# /…/
# SaX generated X11 config file
# Created on: 2010-03-19T15:04:07+0000.
#
# Version: 8.1
# Contact: Marcus Schaefer <sax@suse.de>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
#
# Automatically generated by [SaX2] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
#

Section "Files"
  FontPath     "/usr/share/fonts/misc:unscaled"
  FontPath     "/usr/share/fonts/local"
  FontPath     "/usr/share/fonts/75dpi:unscaled"
  FontPath     "/usr/share/fonts/100dpi:unscaled"
  FontPath     "/usr/share/fonts/Type1"
  FontPath     "/usr/share/fonts/URW"
  FontPath     "/usr/share/fonts/Speedo"
  FontPath     "/usr/share/fonts/PEX"
  FontPath     "/usr/share/fonts/cyrillic"
  FontPath     "/usr/share/fonts/latin2/misc:unscaled"
  FontPath     "/usr/share/fonts/latin2/75dpi:unscaled"
  FontPath     "/usr/share/fonts/latin2/100dpi:unscaled"
  FontPath     "/usr/share/fonts/latin2/Type1"
  FontPath     "/usr/share/fonts/latin7/75dpi:unscaled"
  FontPath     "/usr/share/fonts/baekmuk:unscaled"
  FontPath     "/usr/share/fonts/japanese:unscaled"
  FontPath     "/usr/share/fonts/kwintv"
  FontPath     "/usr/share/fonts/truetype"
  FontPath     "/usr/share/fonts/uni:unscaled"
  FontPath     "/usr/share/fonts/CID"
  FontPath     "/usr/share/fonts/ucs/misc:unscaled"
  FontPath     "/usr/share/fonts/ucs/75dpi:unscaled"
  FontPath     "/usr/share/fonts/ucs/100dpi:unscaled"
  FontPath     "/usr/share/fonts/hellas/misc:unscaled"
  FontPath     "/usr/share/fonts/hellas/75dpi:unscaled"
  FontPath     "/usr/share/fonts/hellas/100dpi:unscaled"
  FontPath     "/usr/share/fonts/hellas/Type1"
  FontPath     "/usr/share/fonts/misc/sgi:unscaled"
  FontPath     "/usr/share/fonts/xtest"
  FontPath     "/opt/kde3/share/fonts"
  InputDevices "/dev/gpmdata"
  InputDevices "/dev/input/mice"
EndSection

Section "Module"
  Load         "dri"
  Load         "dbe"
  Load         "extmod"
  Load         "glx"
EndSection

Section "ServerFlags"
  Option       "AllowMouseOpenFail" "on"
  Option       "ZapWarning" "on"
EndSection

Section "InputDevice"
  # Driver "kbd" will be disabled unless 'Option "AutoAddDevices" "off"' 
  # is set in "ServerFlags" section. 
  Driver       "kbd"
  Identifier   "Keyboard[0]"
  Option       "Protocol" "Standard"
  Option       "XkbLayout" "gb"
  Option       "XkbModel" "microsoftpro"
  Option       "XkbRules" "xfree86"
EndSection

Section "InputDevice"
  # Driver "mouse" will be disabled unless 'Option "AutoAddDevices" "off"' 
  # is set in "ServerFlags" section. 
  Driver       "mouse"
  Identifier   "Mouse[1]"
  Option       "Buttons" "5"
  Option       "Device" "/dev/input/mice"
  Option       "Name" "PS/2 Generic Mouse"
  Option       "Protocol" "explorerps/2"
  Option       "Vendor" "Sysp"
  Option       "ZAxisMapping" "4 5"
EndSection


Section "Monitor"
  HorizSync    30-40
  Identifier   "Monitor[0]"
  ModelName    "Unknown"
  Option       "DPMS"
  VendorName   "Unknown"
  VertRefresh  50-75
  UseModes     "Modes[0]"
EndSection


Section "Modes"
  Identifier   "Modes[0]"
EndSection


Section "Device"
  BoardName    "Vesa-BIOS Graphics"
  Driver       "vesa"
  Identifier   "Device[0]"
  VendorName   "VESA"
EndSection


Section "Screen"
  DefaultDepth 16
  SubSection "Display"
    Depth      15
    Modes      "800x600" 
  EndSubSection
  SubSection "Display"
    Depth      16
    Modes      "800x600" 
  EndSubSection
  SubSection "Display"
    Depth      24
    Modes      "800x600" 
  EndSubSection
  SubSection "Display"
    Depth      8
    Modes      "800x600" 
  EndSubSection
  Device       "Device[0]"
  Identifier   "Screen[0]"
  Monitor      "Monitor[0]"
EndSection


Section "ServerLayout"
  Identifier   "Layout[all]"
  InputDevice  "Keyboard[0]" "CoreKeyboard"
  InputDevice  "Mouse[1]" "CorePointer"
  Screen       "Screen[0]"
EndSection


Section "DRI"
    Group      "video"
    Mode       0660
EndSection

Section "Extensions"
EndSection

]
19-Mar 15:04:10 <X> Logging File contents: /var/log/xlog
(II) config/hal: initialized
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux linux-tj57 2.6.31.12-0.1-default #1 SMP 2010-01-27 08:20:11 +0100 i586
Build Date: 02 November 2009 12:05:39PM

Before reporting problems, check [X.Org Wiki - Home](http://wiki.x.org)
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 19 15:04:07 2010
(++) Using config file: "/tmp/sax2-4618/xorg.conf"
(==) ServerLayout "Layout[all]"
(**) |--&gt;Screen "Screen[0]" (0)
(**) |   |--&gt;Monitor "Monitor[0]"
(**) |   |--&gt;Device "Device[0]"
(**) |--&gt;Input Device "Keyboard[0]"
(**) |--&gt;Input Device "Mouse[1]"
(**) Option "ZapWarning" "on"
(**) Option "AllowMouseOpenFail" "on"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/local" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latin2/misc" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latin2/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latin2/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latin2/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latin7/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/baekmuk" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/japanese" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/kwintv" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/uni" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ucs/misc" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ucs/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ucs/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/hellas/misc" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/hellas/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/hellas/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/hellas/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/xtest" does not exist.
Entry deleted from font path.
(WW) The directory "/opt/kde3/share/fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/Type1,
/usr/share/fonts/URW,
/usr/share/fonts/Speedo,
/usr/share/fonts/cyrillic,
/usr/share/fonts/truetype,
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/truetype/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled
(**) Input device list set to "/dev/gpmdata,/dev/input/mice"
(==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard[0]
(WW) Disabling Mouse[1]
(II) Loader magic: 0x3ac0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
#5

(–) PCI:*(0:0:3:0) 18ca:0021:18ca:0020 rev 0, Mem @ 0xe8000000/67108864, 0xec000000/262144, I/O @ 0x0000e000/128, BIOS @ 0x???/32768
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX**
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX**
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX**
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX**
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX**
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX**
(II) “extmod” will be loaded. This was enabled by default and also specified in the config file.
(II) “dbe” will be loaded. This was enabled by default and also specified in the config file.
(II) “glx” will be loaded. This was enabled by default and also specified in the config file.
(II) “record” will be loaded by default.
(II) “dri” will be loaded. This was enabled by default and also specified in the config file.
(II) “dri2” will be loaded by default.
(II) LoadModule: “dri”
(II) Loading /usr/lib/xorg/modules//extensions/libdri.so
(II) Module dri: vendor=“X.Org Foundation”
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: “dbe”
(II) Loading /usr/lib/xorg/modules//extensions/libdbe.so
(II) Module dbe: vendor=“X.Org Foundation”
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: “extmod”
(II) Loading /usr/lib/xorg/modules//extensions/libextmod.so
(II) Module extmod: vendor=“X.Org Foundation”
compiled for 1.6.5, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: “glx”
(II) Loading /usr/lib/xorg/modules//extensions/libglx.so
(II) Module glx: vendor=“X.Org Foundation”
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: “record”
(II) Loading /usr/lib/xorg/modules//extensions/librecord.so
(II) Module record: vendor=“X.Org Foundation”
compiled for 1.6.5, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: “dri2”
(II) Loading /usr/lib/xorg/modules//extensions/libdri2.so
(II) Module dri2: vendor=“X.Org Foundation”
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: “vesa”
(II) Loading /usr/lib/xorg/modules//drivers/vesa_drv.so
(II) Module vesa: vendor=“X.Org Foundation”
compiled for 1.6.5, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:03:0
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX**
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX**
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX**
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX**
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX**
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX**
(II) Loading sub module “vbe”
(II) LoadModule: “vbe”
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor=“X.Org Foundation”
compiled for 1.6.5, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module “int10”
(II) LoadModule: “int10”
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor=“X.Org Foundation”
compiled for 1.6.5, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) VESA(0): initializing int10
(WW) System lacks support for changing MTRRs
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VbeVersion is 768, OemStringPtr is 0x00002100,
OemVendorNamePtr is 0x00002114, OemProductNamePtr is 0x00002146,
OemProductRevPtr is 0x0000215a
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 65472 kB
(II) VESA(0): VESA VBE OEM: XGI
(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor: XGI Technology, Inc.
(II) VESA(0): VESA VBE OEM Product: Volari Z9s
(II) VESA(0): VESA VBE OEM Product Rev: 1.11.01
(**) VESA(0): Depth 16, (–) framebuffer bpp 16
(==) VESA(0): RGB weight 565
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module “ddc”
(II) LoadModule: “ddc”
(II) Module “ddc” already built-in
(II) VESA(0): VESA VBE DDC supported
(II) VESA(0): VESA VBE DDC Level none
(II) VESA(0): VESA VBE DDC transfer in appr. 0 sec.
(II) VESA(0): VESA VBE DDC read failed
(II) VESA(0): VESA VBE PanelID read failed
(II) VESA(0): Searching for matching VESA mode(s):
Mode: 100 (640x400)
ModeAttributes: 0x9f
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0xa000
WinFuncPtr: 0xc0003ec4
BytesPerScanline: 640
XResolution: 640
YResolution: 400
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 31
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xe8000000
LinBytesPerScanLine: 640
BnkNumberOfImagePages: 31
LinNumberOfImagePages: 31
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 1000000
Mode: 101 (640x480)
ModeAttributes: 0x9f
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0xa000
WinFuncPtr: 0xc0003ec4
BytesPerScanline: 640
XResolution: 640
YResolution: 480
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 24
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xe8000000
LinBytesPerScanLine: 640
BnkNumberOfImagePages: 24
LinNumberOfImagePages: 24
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 300000000
Mode: 132 (320x240)
ModeAttributes: 0x9f
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0xa000
WinFuncPtr: 0xc0003ec4
BytesPerScanline: 320
XResolution: 320
YResolution: 240
XCharSize: 8
YCharSize: 8
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 63
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xe8000000
LinBytesPerScanLine: 320
BnkNumberOfImagePages: 63
LinNumberOfImagePages: 63
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 1000000
Mode: 138 (320x200)
ModeAttributes: 0x9f
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0xa000
WinFuncPtr: 0xc0003ec4
BytesPerScanline: 320
XResolution: 320
YResolution: 200
XCharSize: 8
YCharSize: 8
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 127
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xe8000000
LinBytesPerScanLine: 320
BnkNumberOfImagePages: 127
LinNumberOfImagePages: 127
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 1000000

(II) VESA(0): Total Memory: 1023 64KB banks (65472kB)
(EE) VESA(0): No matching modes
(II) UnloadModule: "vesa"
(II) UnloadModule: "int10"
(II) Unloading /usr/lib/xorg/modules//libint10.so
(II) UnloadModule: "vbe"
(II) Unloading /usr/lib/xorg/modules//libvbe.so
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support 
 at [X.Org Wiki - Home](http://wiki.x.org)
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

]************************