Canon TR4550 installing driver

Downloaded driver for Canon TR4550 multi-function printer but installation fail because lack of dependencies:

> sudo ./install.sh 
[sudo] password for root: 
==================================================

Canon Inkjet Printer Driver
Version 5.70
Copyright CANON INC. 2001-2018

==================================================
Command executed = rpm -Uvh ./packages/cnijfilter2-5.70-1.x86_64.rpm
error: Failed dependencies:
        libxml2.so.2()(64bit) is needed by cnijfilter2-5.70-1.x86_64
        libxml2.so.2(LIBXML2_2.4.30)(64bit) is needed by cnijfilter2-5.70-1.x86_64
        libxml2.so.2(LIBXML2_2.6.0)(64bit) is needed by cnijfilter2-5.70-1.x86_64

Searching for libxml2.so.2 in Tumbleweed I installed libxml2-16 but no solution.

libxml2.so.2 got removed long, long time ago. See this thread from January about alternative solutions.

Very interesting thread even if not clear to me in all aspects. Anyway trying several times I finally saw “IPP Everithing” and using it printer works in wifi.
I can control all printer feature (black/colors, double side printing, print test page) and even get ink level in cartridges. And I learn that many modern printers can be used “driverless”. Very good news for Linux users.

I’ve few question left:

  1. YaST has no more “printer manager” or at least not in my pc.
  2. I used “System setting” but it seems not finding printer connected in wifi. YaST did it if remember well.
  3. Not clear what ... make sure that the openSUSE firewall allows mdns first (for Avahi discovery to work).means. In Firewall manager I don’t find a setting for this.

It got removed as it was broken.

mdns is allowed by default for the internal firewall zone. You can see this e.g. in YaST Firewall module.

linux64:/home/stephan # firewall-cmd --list-services
cockpit kdeconnect mdns

This is a Service with Port 5353:

grep -ir mdns /usr/etc/*
.
.
.
/usr/etc/services:mdns               5353/tcp     # Multicast DNS  [IESG] [IETF_Chair] [RFC6762]
/usr/etc/services:mdns               5353/udp     # Multicast DNS  [IESG] [IETF_Chair] [RFC6762]
.
.
.

The Port must be opened in the Firewall.

This can be done by opening the Port explizit or using the service.

If you’re not sure about zone(s) and current configuration, report back with the output from sudo firewall-cmd --list-all-zones.

Look for the zone associated with your LAN interface and check whether mdns is listed under services: .

If it isn’t, you can enable it permanently for the particular zone your LAN interface is assigned to, for example (home zone)…

sudo firewall-cmd --permanent --zone=home --add-service=mdns
sudo firewall-cmd --reload

If you prefer a graphical utility, Firewalld does provide one called firewall-config, and can be installed with sudo zypper in firewall-config. (YaST and Cockpit also provide basic graphical firewall configuration capabilities.)

More info:

@Giorgio_os If you want a gui you can use the system-config-printer.
It is in the repo
One more thing with the libxml.so. A shot in the dark but might work by linking the latest libxml.so to the libxml.so that the canon installer is looking. Try it if it work lucky you if not let’s just charge it to experience :wink:

Unfortunately, the Canon driver won’t work, as explained in the previous topic that hui already linked to. However, if the OP can resolve the firewall issue, driverless printing is the modern approach here.

Sorry for delay in answer, I haven’t TR4550 in my house so I can’t try to follow all suggestions. This is what I tried:

Installed and used, not so different from “systemsetting”. Ans to find a network printer it need IP address. If I remember well old YaST found all network printer s without knowing IP in advance.

I don’t know how to link but I read somewhere (may be in link posted by Hui) that it don’t works.

More important: installed printer using usb connection and “IPP Everywhere” as driver it don’t works. I tried several other driver no way. Any suggestion ?

Your post is a bit confusing. If you want to use network connectivity, CUPS should discover a driverless (IPP Everywhere) printer automatically, provided the printer advertises the service and network discovery is working. You don’t seem to have followed my earlier explanation about ensuring the firewall allows mDNS.

I don’t know whether your printer supports IPP-over-USB. You could check whether ipp-usb is installed and recognises the connected printer…

rpm -q ipp-usb
sudo ipp-usb check

I’m here again because today I’ve access to printer and associated pc.

I tried already

~> sudo firewall-cmd --list-all-zones
[sudo] password di root: 
block
  target: %%REJECT%%
  ingress-priority: 0
  egress-priority: 0
  icmp-block-inversion: no
  interfaces: 
  sources: 
  services: 
  ports: 
  protocols: 
  forward: yes
  masquerade: no
  forward-ports: 
  source-ports: 
  icmp-blocks: 
  rich rules: 

dmz
  target: default
  ingress-priority: 0
  egress-priority: 0
  icmp-block-inversion: no
  interfaces: 
  sources: 
  services: ssh
  ports: 
  protocols: 
  forward: yes
  masquerade: no
  forward-ports: 
  source-ports: 
  icmp-blocks: 
  rich rules: 

docker (active)
  target: ACCEPT
  ingress-priority: 0
  egress-priority: 0
  icmp-block-inversion: no
  interfaces: docker0
  sources: 
  services: ipp ipp-client mdns
  ports: 
  protocols: 
  forward: no
  masquerade: no
  forward-ports: 
  source-ports: 
  icmp-blocks: 
  rich rules: 

drop
  target: DROP
  ingress-priority: 0
  egress-priority: 0
  icmp-block-inversion: no
  interfaces: 
  sources: 
  services: 
  ports: 
  protocols: 
  forward: yes
  masquerade: no
  forward-ports: 
  source-ports: 
  icmp-blocks: 
  rich rules: 

external
  target: default
  ingress-priority: 0
  egress-priority: 0
  icmp-block-inversion: no
  interfaces: 
  sources: 
  services: ssh
  ports: 
  protocols: 
  forward: yes
  masquerade: yes
  forward-ports: 
  source-ports: 
  icmp-blocks: 
  rich rules: 

home
  target: default
  ingress-priority: 0
  egress-priority: 0
  icmp-block-inversion: no
  interfaces: 
  sources: 
  services: dhcpv6-client mdns samba-client ssh
  ports: 
  protocols: 
  forward: yes
  masquerade: no
  forward-ports: 
  source-ports: 
  icmp-blocks: 
  rich rules: 

internal
  target: default
  ingress-priority: 0
  egress-priority: 0
  icmp-block-inversion: no
  interfaces: 
  sources: 
  services: dhcpv6-client mdns samba-client ssh
  ports: 
  protocols: 
  forward: yes
  masquerade: no
  forward-ports: 
  source-ports: 
  icmp-blocks: 
  rich rules: 

nm-shared
  target: ACCEPT
  ingress-priority: 0
  egress-priority: 0
  icmp-block-inversion: no
  interfaces: 
  sources: 
  services: dhcp dns ssh
  ports: 
  protocols: icmp ipv6-icmp
  forward: no
  masquerade: no
  forward-ports: 
  source-ports: 
  icmp-blocks: 
  rich rules: 
        rule priority="32767" reject

public (default, active)
  target: default
  ingress-priority: 0
  egress-priority: 0
  icmp-block-inversion: no
  interfaces: wlp3s0
  sources: 
  services: dhcpv6-client
  ports: 
  protocols: 
  forward: yes
  masquerade: no
  forward-ports: 
  source-ports: 
  icmp-blocks: 
  rich rules: 

trusted
  target: ACCEPT
  ingress-priority: 0
  egress-priority: 0
  icmp-block-inversion: no
  interfaces: 
  sources: 
  services: 
  ports: 
  protocols: 
  forward: yes
  masquerade: no
  forward-ports: 
  source-ports: 
  icmp-blocks: 
  rich rules: 

work
  target: default
  ingress-priority: 0
  egress-priority: 0
  icmp-block-inversion: no
  interfaces: 
  sources: 
  services: dhcpv6-client ssh
  ports: 
  protocols: 
  forward: yes
  masquerade: no
  forward-ports: 
  source-ports: 
  icmp-blocks: 
  rich rules: 

it seems mdns is active in some services but I didn’t find anything clear to me.
I installed firewall-config and here is a bit more clear: it seems mdns is active in home and docker.

OK I try to be more clear. At present printer is working using wifi connection and “IPP Everywhere” as driver.
Installed ipp-usb (it wasn’t) and printer is recognised

~> sudo ipp-usb check
Configuration files: OK
IPP over USB devices:
 Num  Device              Vndr:Prod  Model
   1. Bus 001 Device 005  04a9:1854  "Canon TR4500 series"

Tried to install using usb connection and IPP Everywhere and it don’t works.

Added printer using usb connection and a suggested driver (Canon TR4500 series, Fax, driverless …) still don’t works.

So if the printer is connected to the network, and IPP Everywhere is working, what else do you need?

You firewall output showed that your wlp3s0 interface is assigned to the public zone…

public (default, active)
  target: default
  ingress-priority: 0
  egress-priority: 0
  icmp-block-inversion: no
  interfaces: wlp3s0
  sources: 
  services: dhcpv6-client

So discovery of the printer requires mdns to be allowed. You could reassign the wireless network interface to the internal zone where mdns is allowed, or add the service to the public zone and leave the interface assigned in the current zone.

That’s good to know. When you have the printer USB-connected, what does
lpstat -e then report? Is the printer listed?

There shouldn’t be anything you need to install manually for the printer itself. With ipp-usb installed and running, the USB-connected printer should be detected automatically by CUPS as an IPP printer.

In any case, why not stay with using it as a network printer?