burn ISO fails.

Deutsch (German) Hardware
#1

shows am using : ATAPI: HL-DT-ST DVDRAM GH24NS70, GN01, max UDMA/100

Tried brasero which would not burn ISO, did not seem agreeable to reducing the speed to x4 .

On page https://en.opensuse.org/SDB:Download_help#Burn_the_ISO_image.28s.29

Advice is from the command line can use cdrecord showing :

*** cdrecord dev=/dev/cdrecorder speed=44 driveropts=burnproof -eject -v isofile ***

Not working, puzzled as to why not able to burn another DVD ?


linux-bnn6:~ # zypper se brasero
Loading repository data...
Reading installed packages...

S | Name                           | Summary                                                        | Type      
--+--------------------------------+----------------------------------------------------------------+-----------
i | brasero                        | CD/DVD burning application for GNOME                           | package   
  | brasero                        | CD/DVD burning application for GNOME                           | srcpackage
  | brasero-devel                  | CD/DVD burning application for GNOME                           | package   
  | brasero-lang                   | Languages for package brasero                                  | package   
i | brasero-nautilus               | Brasero CD/DVD burning extension for Nautilus                  | package   
i | libbrasero-burn3-1             | CD/DVD burning application for GNOME                           | package   
i | libbrasero-media3-1            | CD/DVD burning application for GNOME                           | package   
i | libbrasero-utils3-1            | CD/DVD burning application for GNOME                           | package   
  | typelib-1_0-BraseroBurn-3_2_0  | CD/DVD burning application for GNOME -- Introspection bindings | package   
  | typelib-1_0-BraseroMedia-3_2_0 | CD/DVD burning application for GNOME -- Introspection bindings | package   
linux-bnn6:~ # 




linux-bnn6:~ # cdrecord dev=/dev/cdrecorder speed=44 driveropts=burnproof -eject -v openSUSE-12.3-DVD-x86_64.iso 
wodim: No write mode specified.
wodim: Assuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 1 = CD-ROM
scsidev: '/dev/cdrecorder'
devname: '/dev/cdrecorder'
scsibus: -2 target: -2 lun: -2
wodim: No such file or directory. 
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
linux-bnn6:~ # 




linux-bnn6:~ # wodim --devices 
wodim: No such file or directory. 
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
linux-bnn6:~ # wodim -scanbus
wodim: No such file or directory. 
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
linux-bnn6:~ # wodim dev=help
Supported SCSI transports for this platform:

Transport name:        sg
Transport descr.:    Generic transport independent SCSI
Transp. layer ind.:    
Target specifier:    bus,target,lun
Target example:        1,2,0
SCSI Bus scanning:    supported
Open via UNIX device:    not supported

Transport name:        ATA
Transport descr.:    ATA Packet specific SCSI transport
Transp. layer ind.:    ATAPI:
Target specifier:    bus,target,lun
Target example:        ATAPI:1,2,0
SCSI Bus scanning:    supported
Open via UNIX device:    not supported

Transport name:        ATA
Transport descr.:    ATA Packet specific SCSI transport using sg interface
Transp. layer ind.:    ATA:
Target specifier:    bus,target,lun
Target example:        1,2,0
SCSI Bus scanning:    supported
Open via UNIX device:    not supported

Transport name:        RSCSI
Transport descr.:    Remote SCSI
Transp. layer ind.:    REMOTE:
Target specifier:    rscsi@host:bus,target,lun
Target example:        REMOTE:rscsi@host:1,2,0
SCSI Bus scanning:    supported
Open via UNIX device:    not supported
linux-bnn6:~ # zypper se wodim
Loading repository data...
Reading installed packages...

S | Name  | Summary               | Type   
--+-------+-----------------------+--------
i | wodim | Tool for Writing CDRs | package
linux-bnn6:~ # dmesg | grep dvd
    8.115408] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
linux-bnn6:~ # zypper se -d wodim
Loading repository data...
Reading installed packages...

S | Name                   | Summary                                                | Type   
--+------------------------+--------------------------------------------------------+--------
i | cdrkit-cdrtools-compat | Tool for Writing CDRs - cdrtools Compatibility Package | package
i | icedax                 | A CD-Audio Grabbing tool                               | package
i | wodim                  | Tool for Writing CDRs                                  | package
linux-bnn6:~ #
#2

With blank disk inserted:


linux-bnn6:~ # wodim -v -toc
TOC Type: 1 = CD-ROM
Device was not specified. Trying to find an appropriate drive...
Detected CD-R drive: /dev/cdrw
Using /dev/cdrom of unknown capabilities
scsidev: '/dev/cdrom'
devname: '/dev/cdrom'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
Driveropts: 'burnfree'
SCSI buffer size: 64512
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GH24NS70 '
Revision       : 'GN01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x001A (DVD+RW)
Profile: 0x0012 (DVD-RAM) 
Profile: 0x0011 (DVD-R sequential recording) 
Profile: 0x0015 (DVD-R/DL sequential recording) 
Profile: 0x0016 (DVD-R/DL layer jump recording) 
Profile: 0x0014 (DVD-RW sequential recording) 
Profile: 0x0013 (DVD-RW restricted overwrite) 
Profile: 0x001A (DVD+RW) (current)
Profile: 0x001B (DVD+R) 
Profile: 0x002B (DVD+R/DL) 
Profile: 0x0010 (DVD-ROM) 
Profile: 0x0009 (CD-R) 
Profile: 0x000A (CD-RW) 
Profile: 0x0008 (CD-ROM) 
Profile: 0x0002 (Removable disk) 
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE 
Supported modes: PACKET SAO
Drive buf size : 1114112 = 1088 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 19200 kB/s 109x CD 13x DVD
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
Errno: 5 (Input/output error), read toc scsi sendcmd: no error
CDB:  43 00 00 00 00 00 00 00 04 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 43 00 00 0F 24 00 00 C0
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid) error refers to command part, bit ptr 0 (not valid) field ptr 0
cmd finished after 0.002s timeout 40s
wodim: Cannot read TOC header
wodim: Cannot read TOC/PMA
linux-bnn6:~ #

With no disk inserted:


linux-bnn6:~ # wodim -v -toc
TOC Type: 1 = CD-ROM
Device was not specified. Trying to find an appropriate drive...
Detected CD-R drive: /dev/cdrw
Using /dev/cdrom of unknown capabilities
scsidev: '/dev/cdrom'
devname: '/dev/cdrom'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.11
Driveropts: 'burnfree'
SCSI buffer size: 64512
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GH24NS70 '
Revision       : 'GN01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0000 (Reserved/Unknown)
Profile: 0x0012 (DVD-RAM) 
Profile: 0x0011 (DVD-R sequential recording) 
Profile: 0x0015 (DVD-R/DL sequential recording) 
Profile: 0x0016 (DVD-R/DL layer jump recording) 
Profile: 0x0014 (DVD-RW sequential recording) 
Profile: 0x0013 (DVD-RW restricted overwrite) 
Profile: 0x001A (DVD+RW) 
Profile: 0x001B (DVD+R) 
Profile: 0x002B (DVD+R/DL) 
Profile: 0x0010 (DVD-ROM) 
Profile: 0x0009 (CD-R) 
Profile: 0x000A (CD-RW) 
Profile: 0x0008 (CD-ROM) 
Profile: 0x0002 (Removable disk) 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1966080 = 1920 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 19314 kB/s 109x CD 13x DVD
Errno: 5 (Input/output error), test unit ready scsi sendcmd: no error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x01 (medium not present - tray closed) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.007s timeout 40s
wodim: No disk / Wrong disk!
linux-bnn6:~ #
#3

oops !

Sorry, did not realize this was in Deutsch

So happy, indeed appreciate if moved to English, though solution welcome…

#4

You’re using /dev/cdrecorder instead of /dev/cdrom, or /dev/sr0

#5

Many thanks, ended up using brasero on the desktop.

Noticed on https://en.opensuse.org/SDB:Download_help#Burn_the_ISO_image.28s.29

the (Note that from 12.3 on, the ISO won’t fit onto a CD anymore, use a USB-stick instead)

Consider this resolved.