Broadcom wlan + BT coexistence

[hcvv]

Please do not double post. Both threads are merged now.

[malcolmlewis]

@javier

Hello.

I have this hardware…

Code:
wlan1 Dell Wireless 1704 802.11n + BT 4.0
Code:
Broadcom Corp. BCM43142 Bluetooth 4.0

Broadcom Inc. and subsidiaries BCM43142 802.11b/g/n (rev 01)

Broadcom and subsidiaries BCM43142 802.11b/g/n driver: wl

WiFi works fine, bluetooth too, but not both at the same time.
Music on bluetooth audio cuts when download a web page or a file.

I tried this:
Code:
/etc/bluetooth/main.conf

[General]
AutoEnable=true

#COEXISTENCIA CON WIFI
ohwcrypt=1
blink=1
btcoex_enable=1
bt_ant_diversity=1

Code:
/etc/modprobe.d/iwlwifi.conf

options iwlwifi bt_coex_active=1

But nothing works, or works worst

So I want to know how to configure the device coexistence to stop interference.

PLEASE, IF YOU DON’T KNOW HOW TO SOLVE THIS ISSUE DON’T POST ANYTHING.

I DON’T NEED NEWBIES SAYING “USE 5 GHZ”.
I DON’T NEED TROLLS RUNNING A LOT OF COMMAND LINES TO DISCOVER I AM USING 2.4 GHZ BECAUSE THAT IS OBVIOUS.
ONLY SERIOUS PEOPLE, NOT MODERATORS.
ONLY SERIOUS ANSWERS, NOT MODERATORS.
ONLY PEOPLE WHO KNOW ABOUT THIS, NOT MODERATORS

I DON’T WANT TO KNOW HOW GHZ ARE USING THE DEVICE, I DON’T WANT TO KNOW ANYTHING ABOUT DRIVERS INFO, READ THE POST,
I ONLY WANT TO KNOW HOW TO SET THE DEVICE COEXISTENCE TO STOP THE INTERFERENCE.
PLEASE READ THE POST.

Thank you!

Hi
I’m an Administrator, this is an official public warning to adjust your attitude, or face the consequences.

First off, your using a proprietary driver, which you obtained I’m assuming via the Packman repository? If so you need to follow up on their Mailing List for support.

The best option would be to revert to the open source driver(s) and see if the issue duplicates, then you could look at raising a bug report and also possibly glean some interest from the openSUSE kernel developer for the broadcom oss driver, but agian attitude adjustment is required.

[javier]

@malcolmlewis

Hi
I’m an Administrator, this is an official public warning to adjust your attitude, or face the consequences.

First off, your using a proprietary driver, which you obtained I’m assuming via the Packman repository? If so you need to follow up on their Mailing List for support.

The best option would be to revert to the open source driver(s) and see if the issue duplicates, then you could look at raising a bug report and also possibly glean some interest from the openSUSE kernel developer for the broadcom oss driver, but agian attitude adjustment is required.

This is an official public answer: " I don’t care your warnings".
I am not here for warnings.

Now, the important thing, the topic.
I am using the packman repository and I has been installed that driver because wlan and bluetooth don’t work after opensuse installation.
That happens on most of GNU/Linux based systems.

So I want to know if there is a way to configure drivers options like “40 mhz intollerance” or something to stop or reduce the interference.