Can somebody please help me on. The 3 SCSI-harddiscs in RAID-compound have been cleared and each made al logical drive by BIOS. Now I have installed 12.3 but it wont boot. A Problem occurred with GRUB. The Firmware test on the disc came up with the following error messages: Fehlgeschlagen MTRR validationF Speicherbereich 0x10000000 zu 0x101fffff (PCI-Bus 0000:04) falsche Attribut w F Speicherbereich 0x10200000 zu 0x103fffff (PCI-Bus 0000:04) falsche Attribut wF Speicherbereich 0x10400000 zu 0x105fffff (PCI-Bus 0000:04) falsche Attribut w F Speicherbereich 0xfc000000 zu 0xfcffffff (PCI-Bus 0000:04) falsche Attribut wfail DMI-Informationen Check F No smbios nor DMI Einstiegspunkt found. fail OS / 2 Memory Hole test F the memory card has a memory hole between 15MB und 16MB Fail HPWR Konfiguration testF fehlgeschlagen lokalise HPET base warn EDD BOOR dist hinting Device 80: The System boots from device 0000:03:02.0 Kanal: 0 ide: 0 lun: 0W: Device 80 kein passender MBR-Signatur (0x00000000) für die Boot diskDevice 81 gefunden: Gerät wird von 0000 vorgesehen : 03:02.0 Kanal 0 ID: 1 lun: 0W: Gerät 81: Kein passendes MBR-Signatur (0x00000000) für die Boot diskDevice 81 gefunden: 2 lun: 0W: Gerät 82 ist nach Gerät 0000:03:02.0 Kanal 0 id bereitgestellt : Kein passendes MBR-Signatur (0x00000000) für die Boot diskW gefunden: CPU Frequency Scaling nicht supportetInfo: Prozessor nicht unterstützt Virtualisierung extensions.no DMAR ACPI-Tabelle found The Kernel dous niot export Microcode versions. a lot of Infos.And in German - sorry. and I haven#t got a glimpse yet what it means. Do you? Does the Google translator halp you? Thanks for helping me.
You might want to format things and maybe use the code tags to make this readable. Even if in German.
Did you check the checksums of the download? Did you burn on good media? Did you burn at slowest speed?
Did you get to the first menu??
I got through the whole installationprocess well. but after automatically restarting the maschine, it got completely stuck after the RAID controller had detected and handled the three logical HDDs. The only thing still woring was ctrl alt del.
I dont understand the tag thing and how to practically do the checksumm test. What I have done is have the installation media tested at the start meny that shows up, when The Computer has used the DVD as Boot media. It gave me an ok.
I could try to get the error messages in Englisch but to get past the Hang up, do I have to clear my dist?
My guess with what you have said so far is that it may be a video problem. What video is on that machine? Did you try a safe boot?
My video is onbord: XGF Volari Z7 onboard
As far as I remember Ive been installing safe settings anyway. Doing it again right nwo and with simpler wideo settings.
Changing the video options brougth me one step further. Now linux tries to boot but will end up offering me the emergenxy system.
and now? The reprot is to long to fit on the screen. There seem to be some few more problems. Can I report em tthe commumity in some economic way? What is likely to lead to some mere “success”?