Black screen on boot after zypper dup

Owner of machine can’t post, as account here tooo new, so:

Hi,

today updated my TW from 6.1.7-1-default to the newest version 6.4… Everything updated fine and when I rebooted i got through GRUB as normal and the just a black screen with a blinking underscore taunting me.

I booted in recovery mode and the last two lines are:

ima: Allocated hash algorithm: sha256

input: ImExPS/2 Generic ExplorerMouse as /devices.......

then at the bottom there is my nemesis again, the blinking underscore… no errors or warnings, no nothing.

Hardware: Framework laptop 12th Gen Intel i5

I am still using ext4 so there is no snapper.

1 Like

update

lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06) 
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06) 
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) 
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) 
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04) 
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04) 
00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-LM (rev 04) 
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 04) 
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04) 
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d4) 
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d4) 
00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d4) 
00:1c.5 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 (rev d4) 
00:1c.6 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #7 (rev d4) 
00:1c.7 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #8 (rev d4) 
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 04) 
00:1f.0 ISA bridge: Intel Corporation QM87 Express LPC Controller (rev 04) 
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 04) 
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 04) 
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24) 
0e:00.0 SD Host controller: O2 Micro, Inc. SD/MMC Card Reader Controller (rev 01)

He can boot into 6.1.7-1 kernel via grub (advanced options) and provide journal …

The lscpi output doesn’t match the informations provided in post one:
A 12th Gen i5 versus a 4th Gen Xeon E3-1200

1 Like

cough

The doctor is a little tired, was a hard day, correct machine now

lspci
00:00.0 Host bridge: Intel Corporation Device 4621 (rev 02) 
00:02.0 VGA compatible controller: Intel Corporation Alder Lake-P Integrated Graphics Controller (rev 0c) 
00:04.0 Signal processing controller: Intel Corporation Alder Lake Innovation Platform Framework Processor Participant (rev 02) 
00:06.0 PCI bridge: Intel Corporation 12th Gen Core Processor PCI Express x4 Controller #0 (rev 02) 
00:07.0 PCI bridge: Intel Corporation Alder Lake-P Thunderbolt 4 PCI Express Root Port #0 (rev 02) 
00:07.1 PCI bridge: Intel Corporation Alder Lake-P Thunderbolt 4 PCI Express Root Port #1 (rev 02) 
00:07.2 PCI bridge: Intel Corporation Alder Lake-P Thunderbolt 4 PCI Express Root Port #2 (rev 02) 
00:07.3 PCI bridge: Intel Corporation Alder Lake-P Thunderbolt 4 PCI Express Root Port #3 (rev 02) 
00:08.0 System peripheral: Intel Corporation 12th Gen Core Processor Gaussian & Neural Accelerator (rev 02) 
00:0a.0 Signal processing controller: Intel Corporation Platform Monitoring Technology (rev 01) 
00:0d.0 USB controller: Intel Corporation Alder Lake-P Thunderbolt 4 USB Controller (rev 02) 
00:0d.2 USB controller: Intel Corporation Alder Lake-P Thunderbolt 4 NHI #0 (rev 02) 
00:0d.3 USB controller: Intel Corporation Alder Lake-P Thunderbolt 4 NHI #1 (rev 02) 
00:14.0 USB controller: Intel Corporation Alder Lake PCH USB 3.2 xHCI Host Controller (rev 01) 
00:14.2 RAM memory: Intel Corporation Alder Lake PCH Shared SRAM (rev 01) 
00:15.0 Serial bus controller: Intel Corporation Alder Lake PCH Serial IO I2C Controller #0 (rev 01) 
00:15.1 Serial bus controller: Intel Corporation Alder Lake PCH Serial IO I2C Controller #1 (rev 01) 
00:15.3 Serial bus controller: Intel Corporation Alder Lake PCH Serial IO I2C Controller #3 (rev 01) 
00:16.0 Communication controller: Intel Corporation Alder Lake PCH HECI Controller (rev 01) 
00:16.3 Serial controller: Intel Corporation Alder Lake AMT SOL Redirection (rev 01) 
00:1d.0 PCI bridge: Intel Corporation Device 51b0 (rev 01) 
00:1f.0 ISA bridge: Intel Corporation Alder Lake PCH eSPI Controller (rev 01) 
00:1f.3 Audio device: Intel Corporation Alder Lake PCH-P High Definition Audio Controller (rev 01) 
00:1f.4 SMBus: Intel Corporation Alder Lake PCH-P SMBus Host Controller (rev 01) 
00:1f.5 Serial bus controller: Intel Corporation Alder Lake-P PCH SPI Controller (rev 01) 
01:00.0 Non-Volatile memory controller: Sandisk Corp WD PC SN810 / Black SN850 NVMe SSD (rev 01) 
a6:00.0 Network controller: Intel Corporation Wi-Fi 6 AX210/AX211/AX411 160MHz (rev 1a)
1 Like

Hi, I’m the person with the problem :slight_smile:

The attempted boots into the broken kernel don’t even show up in the journal. When I ask it to list the boots it only lists the ones into the old kernel. Also when i scroll through just jorunalctl there are no entries between the last exit entry of the old kernel and the first start job by the old kernel.

If there is another journal I dont know about I would gladly provide that.

I have the same problem, hangs after booting with kernel 6.4 with the output “ima: Allocated hash algorithm: sha256 … input: …”

Tumbleweed 20230713
kernel 6.3.9-1-default works
kernel 6.4.2-1-default hangs

tuxedo InfinityBook_S_17_Gen7 (clevo NS70PU)
secure boot is disabled.

I am trying to find out more details.

1 Like

Hmm, ok, I think I found something.
Kernel 6.4 seems to have problems with TPM, at least on my laptop.
Unfortunately you can’t turn off TPM in the BIOS, but the following additional directive in GRUB_CMDLINE_LINUX_DEFAULT (/etc/default/grub) worked:

tpm_tis.interrupts=0

Hardware info:
tpm_tis IFX0785:00: 2.0 TPM (device-id 0x1B, rev-id 22)

See also

1 Like

See also
https://bugzilla.kernel.org/show_bug.cgi?id=217631
“Just a side note: as I stated before: this bug is NOT limited to Framework laptops, it has wider impact.”

1 Like

Thank You.

I turned TPM to hidden in the BIOS and now it boots no problem :).