Avidemux3 from packman not more working

Hello,

I’m on tumbleweed with packman repository enabled.
Last snapshot installed is 20240130.
I see that avidemux3 (version 2.8.1-1699.2.pm.64) starts but the video frame remains black and the sound doesn’t play.
The same mp4 file plays correctly with vlc.
I have a lot of messages in journalctl from avidemux3 but nothing marked as error
My hardware for sound is

hpprol2:~ # lspci -vnn | grep -A 1 -i audio 
0e:04.0 Multimedia audio controller [0401]: C-Media Electronics Inc CMI8788 [Oxygen HD Audio] [13f6:8788]
        Subsystem: ASUSTeK Computer Inc. CMI8786 (Xonar DGX) [1043:8521]

and for video

0a:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK104GL [Quadro K4200] [10de:11b4] (rev a1) (prog-if 00 [VGA controller])
        Subsystem: NVIDIA Corporation Device [10de:1096]
        Physical Slot: 3
        Flags: bus master, fast devsel, latency 0, IRQ 151
        Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
        Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Memory at de000000 (64-bit, prefetchable) [size=32M]
        I/O ports at 6000 [size=128]
        Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
        Capabilities: [60] Power Management version 3
        Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [78] Express Endpoint, MSI 00
        Capabilities: [b4] Vendor Specific Information: Len=14 <?>
        Capabilities: [100] Virtual Channel
        Capabilities: [128] Power Budgeting <?>
        Capabilities: [420] Advanced Error Reporting
        Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
        Kernel driver in use: nouveau
        Kernel modules: nouveau

There was a change in snapshot 20240124 where phonon4qt5-backend-gstreamer was replaced by phonon4qt5-backend-vlc. Can this be the problem?

The journalclt output can be found at https://paste.opensuse.org/pastes/d21d18897c5a
A question how to open a bug report for packman?

Regards
Philippe

I get the same result in Leap 15.5 XFCE.

@phil524 @ionmich Since it’s a third part repository, you need to ask on their Mailing List…
https://lists.links2linux.de/cgi-bin/mailman/listinfo/packman

I do see a thread https://lists.links2linux.de/pipermail/packman/2023-December/017656.html (In German)

I installed avidemux3-qt5 and now avidemux shows up in the Multimedia Menu and works.

Avidemux3-qt5 is installed on my system.

Regards
Philippe

Thanks,

I sent a mail to the packman mailing list after registering.

Regards
Philippe

2 Likes

Problem solved swithing display video mode (preference → display) from vdPAU to Qt5.

Regards
Philippe

1 Like