automatic shutdown after boot, please help

Motokultivator · January 14, 2009, 7:43pm

Hi all

OS: OpenSuse 11.1
Kernel: 2.6.27.7-9-pae
Motherboard: foxconn P9657AA
Graphic card: ATI Radeon x1600 Pro

/var/log/acpid

Jan 14 18:56:45 linux-e49g acpid: client connected from 2644[105:106]
Jan 14 18:56:49 linux-e49g acpid: client connected from 2838[0:0]
Jan 14 18:57:33 linux-e49g acpid: exiting

/var/log/boot.msg

Inspecting /boot/System.map-2.6.27.7-9-pae
Cannot find map file.
No module symbols loaded - kernel modules not enabled.

Cannot build symbol table - disabling symbol lookups
klogd 1.4.1, log source = ksyslog started.
<6>Initializing cgroup subsys cpuset
<6>Initializing cgroup subsys cpu
<5>Linux version 2.6.27.7-9-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2008-12-04 18:10:04 +0100
<6>BIOS-provided physical RAM map:
<6> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
<6> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
<6> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<6> BIOS-e820: 0000000000100000 - 000000003fedf800 (usable)
<6> BIOS-e820: 000000003fedf800 - 000000003fee0000 (reserved)
<6> BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
<6> BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
<6> BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
<6> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
<6> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
<6>DMI 2.4 present.
<5>Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
<6>last_pfn = 0x3fedf max_arch_pfn = 0x1000000
<6>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
<7>kernel direct mapping tables up to 38000000 @ 10000-15000
<6>NX (Execute Disable) protection: active
<6>RAMDISK: 37a7d000 - 37fef9e0
<4>ACPI: RSDP 000F7AB0, 0014 (r0 IntelR)
<4>ACPI: RSDT 3FEE3040, 0034 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
<4>ACPI: FACP 3FEE30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
<4>ACPI: DSDT 3FEE3180, 43C0 (r1 INTELR AWRDACPI     1000 MSFT  3000000)
<4>ACPI: FACS 3FEE0000, 0040
<4>ACPI: HPET 3FEE7680, 0038 (r1 IntelR AWRDACPI 42302E31 AWRD       98)
<4>ACPI: MCFG 3FEE7700, 003C (r1 IntelR AWRDACPI 42302E31 AWRD        0)
<4>ACPI: APIC 3FEE7580, 0084 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
<7>ACPI: Local APIC address 0xfee00000
<7>NUMA - single node, flat memory mode
<6>Node: 0, start_pfn: 0, end_pfn: 3fedf
<7>  Setting physnode_map array to node 0 for pfns:
<7>  0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 
<7>node 0 pfn: [0 - 3fedf]
<7>Reserving 2560 pages of KVA for lmem_map of node 0 at 3f400
<7>remove_active_range (0, 259072, 261632)
<6>Reserving total of a00 pages for numa KVA remap
<6>kva_start_pfn ~ 37000 max_low_pfn ~ 38000
<6>max_pfn = 3fedf
<5>126MB HIGHMEM available.
<5>896MB LOWMEM available.
<7>max_low_pfn = 38000, highstart_pfn = 38000
<7>Low memory ends at vaddr f8000000
<7>node 0 will remap to vaddr f7000000 - f7a00000
<7>allocate_pgdat: node 0 NODE_DATA f7000000
<7>remap_numa_kva: node 0
<7>remap_numa_kva: f7000000 to pfn 0003f400
<7>remap_numa_kva: f7200000 to pfn 0003f600
<7>remap_numa_kva: f7400000 to pfn 0003f800
<7>remap_numa_kva: f7600000 to pfn 0003fa00
<7>remap_numa_kva: f7800000 to pfn 0003fc00
<7>High memory starts at vaddr f8000000
<6>  mapped low ram: 0 - 38000000
<6>  low ram: 00000000 - 38000000
<6>  bootmap 00014000 - 0001b000
<6>(11 early reservations) ==> bootmem [0000000000 - 0038000000]
<6>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
<6>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
<6>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
<6>  #3 [0000100000 - 000066c45c]    TEXT DATA BSS ==> [0000100000 - 000066c45c]
<6>  #4 [0037a7d000 - 0037fef9e0]          RAMDISK ==> [0037a7d000 - 0037fef9e0]
<6>  #5 [000066d000 - 0000675000]    INIT_PG_TABLE ==> [000066d000 - 0000675000]
<6>  #6 [000009f000 - 0000100000]    BIOS reserved ==> [000009f000 - 0000100000]
<6>  #7 [0000010000 - 0000014000]          PGTABLE ==> [0000010000 - 0000014000]
<6>  #8 [003f400000 - 003fe00000]          KVA RAM
<6>  #9 [0037000000 - 0037a00000]           KVA PG ==> [0037000000 - 0037a00000]
<6>  #10 [0000014000 - 000001b000]          BOOTMAP ==> [0000014000 - 000001b000]
<6>found SMP MP-table at [c00f3bb0] 000f3bb0
<4>Zone PFN ranges:
<4>  DMA      0x00000010 -> 0x00001000
<4>  Normal   0x00001000 -> 0x00038000
<4>  HighMem  0x00038000 -> 0x0003fedf
<4>Movable zone start PFN for each node
<4>early_node_map[3] active PFN ranges
<4>    0: 0x00000010 -> 0x0000009f
<4>    0: 0x00000100 -> 0x0003f400
<4>    0: 0x0003fe00 -> 0x0003fedf
<7>On node 0 totalpages: 259182
<7>free_area_init_node: node 0, pgdat f7000000, node_mem_map f7002240
<7>  DMA zone: 3947 pages, LIFO batch:0
<7>  Normal zone: 223300 pages, LIFO batch:31
<7>  HighMem zone: 29633 pages, LIFO batch:7
<6>Using APIC driver default
<6>ACPI: PM-Timer IO Port: 0x408
<7>ACPI: Local APIC address 0xfee00000
<6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
<6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
<6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
<6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
<6>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
<6>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
<6>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
<6>IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
<6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
<7>ACPI: IRQ0 used by override.
<7>ACPI: IRQ2 used by override.
<7>ACPI: IRQ9 used by override.
<4>Enabling APIC mode:  Flat.  Using 1 I/O APICs
<6>ACPI: HPET id: 0x10b9a201 base: 0xfed00000
<6>Using ACPI (MADT) for SMP configuration information
<6>SMP: Allowing 4 CPUs, 2 hotplug CPUs
<7>mapped APIC to ffffb000 (fee00000)
<7>mapped IOAPIC to ffffa000 (fec00000)
<6>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
<6>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
<6>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
<6>Allocating PCI resources starting at 40000000 (gap: 3ff00000:a0100000)
<6>PERCPU: Allocating 39708 bytes of per cpu data
<7>NR_CPUS: 128, nr_cpu_ids: 4, nr_node_ids 8
<4>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256880
<4>Policy zone: HighMem
<5>Kernel command line: root=/dev/disk/by-id/ata-Maxtor_6V080E0_V22WTYPG-part8 resume=/dev/disk/by-id/ata-Maxtor_6V080E0_V22WTYPG-part6 splash=silent vga=0x31a
<6>bootsplash: silent mode.
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Initializing CPU#0
<4>PID hash table entries: 4096 (order: 12, 16384 bytes)
<6>TSC: PIT calibration confirmed by PMTIMER.
<6>TSC: using PMTIMER calibration value
<4>Detected 1868.228 MHz processor.
<4>Console: colour dummy device 80x25
<6>console [tty0] enabled
<6>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>Initializing HighMem for node 0 (00038000:0003fedf)
<6>Memory: 1014316k/1047420k available (2396k kernel code, 22412k reserved, 1959k data, 328k init, 119676k highmem)
<6>virtual kernel memory layout:
<6>    fixmap  : 0xff8b6000 - 0xfffff000   (7460 kB)
<6>    pkmap   : 0xff400000 - 0xff600000   (2048 kB)
<6>    vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
<6>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
<6>      .init : 0xc0548000 - 0xc059a000   ( 328 kB)
<6>      .data : 0xc03571ab - 0xc0540f88   (1959 kB)
<6>      .text : 0xc0100000 - 0xc03571ab   (2396 kB)
<6>Checking if this processor honours the WP bit even in supervisor mode...Ok.
<7>CPA: page pool initialized 1 of 1 pages preallocated
<4>HPET config register value = 0xFFFFFFFF. Disabling HPET
<6>Calibrating delay loop (skipped), value calculated using timer frequency.. 3736.45 BogoMIPS (lpj=7472912)
<4>kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
<6>Security Framework initialized
<6>SELinux:  Disabled at boot.
<6>AppArmor: AppArmor initialized
<4>Mount-cache hash table entries: 512
<6>Initializing cgroup subsys ns
<6>Initializing cgroup subsys cpuacct
<6>Initializing cgroup subsys memory
<6>Initializing cgroup subsys devices
<6>Initializing cgroup subsys freezer
<6>CPU: L1 I cache: 32K, L1 D cache: 32K
<6>CPU: L2 cache: 2048K
<6>CPU: Physical Processor ID: 0
<6>CPU: Processor Core ID: 0
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>using mwait in idle threads.
<6>Checking 'hlt' instruction... OK.
<6>ACPI: Core revision 20080609
<6>ACPI: Checking initramfs for custom DSDT
<4>Parsing all Control Methods:
<4>Table [DSDT](id 0001) - 588 Objects with 60 Devices 172 Methods 34 Regions
<4> tbxface-0596 [00] tb_load_namespace     : ACPI Tables successfully acquired
<4>evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
<6>Mapping cpu 0 to node 0
<4>ENABLING IO-APIC IRQs
<6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1

...... <next post>

Motokultivator · January 14, 2009, 7:45pm


...... <above post>
<6>CPU0: Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz stepping 06
<6>Booting processor 1/1 ip 6000
<6>Initializing CPU#1
<6>Mapping cpu 1 to node 0
<6>Calibrating delay using timer specific routine.. 3736.72 BogoMIPS (lpj=7473455)
<6>CPU: L1 I cache: 32K, L1 D cache: 32K
<6>CPU: L2 cache: 2048K
<6>CPU: Physical Processor ID: 0
<6>CPU: Processor Core ID: 1
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#1.
<6>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
<6>CPU1: Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz stepping 06
<6>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
<6>Brought up 2 CPUs
<6>Total of 2 processors activated (7473.18 BogoMIPS).
<7>CPU0 attaching sched-domain:
<7> domain 0: span 0-1 level MC
<7>  groups: 0 1
<7>  domain 1: span 0-1 level NODE
<7>   groups: 0-1
<7>CPU1 attaching sched-domain:
<7> domain 0: span 0-1 level MC
<7>  groups: 1 0
<7>  domain 1: span 0-1 level NODE
<7>   groups: 0-1
<6>net_namespace: 1044 bytes
<6>Booting paravirtualized kernel on bare hardware
<6>NET: Registered protocol family 16
<6>ACPI: bus type pci registered
<5>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
<5>PCI: MCFG area at e0000000 reserved in E820
<6>PCI: Using MMCONFIG for extended config space
<6>PCI: Using configuration type 1 for base access
<4>evgpeblk-0957 [00] ev_create_gpe_block   : GPE 00 to 1F [_GPE] 4 regs on int 0x9
<7>ACPI: EC: Look up EC in DSDT
<4>Completing Region/Field/Buffer/Package initialization:......................................................................................
<4>Initialized 29/34 Regions 9/9 Fields 18/18 Buffers 30/30 Packages (597 nodes)
<4>Initializing Device/Processor/Thermal objects by executing _INI methods:..
<4>Executed 2 _INI methods requiring 1 _STA executions (examined 67 objects)
<4>evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 1 Runtime GPEs in this block
<6>ACPI: Interpreter enabled
<6>ACPI: (supports S0 S3 S4 S5)
<6>ACPI: Using IOAPIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
<6>pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
<6>pci 0000:00:01.0: PME# disabled
<7>PCI: 0000:00:1a.0 reg 20 io port: [fc00, fc1f]
<7>PCI: 0000:00:1a.1 reg 20 io port: [f800, f81f]
<7>PCI: 0000:00:1a.7 reg 10 32bit mmio: [fdfff000, fdfff3ff]
<6>pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
<6>pci 0000:00:1a.7: PME# disabled
<7>PCI: 0000:00:1b.0 reg 10 64bit mmio: [fdff8000, fdffbfff]
<6>pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
<6>pci 0000:00:1b.0: PME# disabled
<6>pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
<6>pci 0000:00:1c.0: PME# disabled
<6>pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
<6>pci 0000:00:1c.1: PME# disabled
<7>PCI: 0000:00:1d.0 reg 20 io port: [f400, f41f]
<7>PCI: 0000:00:1d.1 reg 20 io port: [f000, f01f]
<7>PCI: 0000:00:1d.2 reg 20 io port: [ec00, ec1f]
<7>PCI: 0000:00:1d.7 reg 10 32bit mmio: [fdffe000, fdffe3ff]
<6>pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
<6>pci 0000:00:1d.7: PME# disabled
<6>pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
<6>pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
<7>PCI: 0000:00:1f.2 reg 10 io port: [e800, e807]
<7>PCI: 0000:00:1f.2 reg 14 io port: [e400, e403]
<7>PCI: 0000:00:1f.2 reg 18 io port: [e000, e007]
<7>PCI: 0000:00:1f.2 reg 1c io port: [dc00, dc03]
<7>PCI: 0000:00:1f.2 reg 20 io port: [d800, d80f]
<7>PCI: 0000:00:1f.2 reg 24 io port: [d400, d40f]
<6>pci 0000:00:1f.2: PME# supported from D3hot
<6>pci 0000:00:1f.2: PME# disabled
<7>PCI: 0000:00:1f.3 reg 10 32bit mmio: [fdffd000, fdffd0ff]
<7>PCI: 0000:00:1f.3 reg 20 io port: [500, 51f]
<7>PCI: 0000:00:1f.5 reg 10 io port: [cc00, cc07]
<7>PCI: 0000:00:1f.5 reg 14 io port: [c800, c803]
<7>PCI: 0000:00:1f.5 reg 18 io port: [c400, c407]
<7>PCI: 0000:00:1f.5 reg 1c io port: [c000, c003]
<7>PCI: 0000:00:1f.5 reg 20 io port: [bc00, bc0f]
<7>PCI: 0000:00:1f.5 reg 24 io port: [b800, b80f]
<6>pci 0000:00:1f.5: PME# supported from D3hot
<6>pci 0000:00:1f.5: PME# disabled
<7>PCI: 0000:00:1f.6 reg 10 64bit mmio: [fdffc000, fdffcfff]
<7>PCI: 0000:01:00.0 reg 10 64bit mmio: [d0000000, dfffffff]
<7>PCI: 0000:01:00.0 reg 18 64bit mmio: [fdcf0000, fdcfffff]
<7>PCI: 0000:01:00.0 reg 20 io port: [6c00, 6cff]
<7>PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
<7>pci 0000:01:00.0: supports D1
<7>pci 0000:01:00.0: supports D2
<7>PCI: 0000:01:00.1 reg 10 64bit mmio: [fdce0000, fdceffff]
<7>pci 0000:01:00.1: supports D1
<7>pci 0000:01:00.1: supports D2
<4>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:01.0. It can be enabled forcedly with 'pcie_aspm=force'
<7>PCI: bridge 0000:00:01.0 io port: [6000, 6fff]
<7>PCI: bridge 0000:00:01.0 32bit mmio: [fdc00000, fdcfffff]
<7>PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff]
<7>PCI: 0000:02:00.0 reg 24 32bit mmio: [fd9fe000, fd9fffff]
<7>PCI: 0000:02:00.0 reg 30 32bit mmio: [0, ffff]
<6>pci 0000:02:00.0: PME# supported from D3hot
<6>pci 0000:02:00.0: PME# disabled
<7>PCI: 0000:02:00.1 reg 10 io port: [ac00, ac07]
<7>PCI: 0000:02:00.1 reg 14 io port: [a800, a803]
<7>PCI: 0000:02:00.1 reg 18 io port: [a400, a407]
<7>PCI: 0000:02:00.1 reg 1c io port: [a000, a003]
<7>PCI: 0000:02:00.1 reg 20 io port: [9c00, 9c0f]
<4>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.0. It can be enabled forcedly with 'pcie_aspm=force'
<7>PCI: bridge 0000:00:1c.0 io port: [9000, afff]
<7>PCI: bridge 0000:00:1c.0 32bit mmio: [fd900000, fd9fffff]
<7>PCI: bridge 0000:00:1c.0 64bit mmio pref: [fd800000, fd8fffff]
<7>PCI: 0000:03:00.0 reg 10 64bit mmio: [fdefc000, fdefffff]
<7>PCI: 0000:03:00.0 reg 18 io port: [8c00, 8cff]
<7>PCI: 0000:03:00.0 reg 30 32bit mmio: [0, 1ffff]
<7>pci 0000:03:00.0: supports D1
<7>pci 0000:03:00.0: supports D2
<6>pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
<6>pci 0000:03:00.0: PME# disabled
<7>PCI: bridge 0000:00:1c.1 io port: [8000, 8fff]
<7>PCI: bridge 0000:00:1c.1 32bit mmio: [fde00000, fdefffff]
<7>PCI: bridge 0000:00:1c.1 64bit mmio pref: [fdd00000, fddfffff]
<7>PCI: 0000:04:01.0 reg 10 32bit mmio: [fdbff000, fdbff7ff]
<7>PCI: 0000:04:01.0 reg 14 io port: [7c00, 7c7f]
<7>pci 0000:04:01.0: supports D2
<6>pci 0000:04:01.0: PME# supported from D2 D3hot D3cold
<6>pci 0000:04:01.0: PME# disabled
<6>pci 0000:00:1e.0: transparent bridge
<7>PCI: bridge 0000:00:1e.0 io port: [7000, 7fff]
<7>PCI: bridge 0000:00:1e.0 32bit mmio: [fdb00000, fdbfffff]
<7>PCI: bridge 0000:00:1e.0 64bit mmio pref: [fda00000, fdafffff]
<7>bus 00 -> node 0
<7>ACPI: PCI Interrupt Routing Table \_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table \_SB_.PCI0.PEX0._PRT]
<7>ACPI: PCI Interrupt Routing Table \_SB_.PCI0.PEX1._PRT]
<7>ACPI: PCI Interrupt Routing Table \_SB_.PCI0.HUB0._PRT]
<6>ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 *10 11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKB] (IRQs *5 9 10 11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 9 10 *11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKE] (IRQs 5 9 10 *11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNKF] (IRQs 5 9 10 11 12 14 15) *0, disabled.
<6>ACPI: PCI Interrupt Link [LNK0] (IRQs 5 *9 10 11 12 14 15)
<6>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 9 10 11 12 14 15) *0, disabled.
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>pnp: PnP ACPI init
<6>ACPI: bus type pnp registered
<4>pnp 00:0e: mem resource (0xfdffb000-0xfdffcfff) overlaps 0000:00:1b.0 BAR 0 (0xfdff8000-0xfdffbfff), disabling
<6>pnp: PnP ACPI: found 15 devices
<6>ACPI: ACPI bus type pnp unregistered
<6>PnPBIOS: Disabled by ACPI PNP
<6>PCI: Using ACPI for IRQ routing
<6>AppArmor: AppArmor Filesystem Enabled
<4>ACPI: RTC can wake from S4
<6>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
<6>system 00:01: ioport range 0x800-0x87f has been reserved
<6>system 00:01: ioport range 0x290-0x297 has been reserved
<6>system 00:01: ioport range 0x880-0x88f has been reserved
<6>system 00:0b: ioport range 0x400-0x4bf could not be reserved
<6>system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved
<6>system 00:0e: iomem range 0xd3000-0xd3fff has been reserved
<6>system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
<6>system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
<6>system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
<6>system 00:0e: iomem range 0x3fee0000-0x3fefffff could not be reserved
<6>system 00:0e: iomem range 0x0-0x9ffff could not be reserved
<6>system 00:0e: iomem range 0x100000-0x3fedffff could not be reserved
<6>system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved
<6>system 00:0e: iomem range 0xfed14000-0xfed1dfff could not be reserved
<6>system 00:0e: iomem range 0xfed20000-0xfed8ffff could not be reserved
<6>system 00:0e: iomem range 0xfee00000-0xfee00fff could not be reserved
<6>system 00:0e: iomem range 0xffb00000-0xffb7ffff could not be reserved
<6>system 00:0e: iomem range 0xfff00000-0xffffffff could not be reserved
<6>system 00:0e: iomem range 0xe0000-0xeffff has been reserved
<6>pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
<6>pci 0000:00:01.0:   IO window: 0x6000-0x6fff
<6>pci 0000:00:01.0:   MEM window: 0xfdc00000-0xfdcfffff
<6>pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
<6>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
<6>pci 0000:00:1c.0:   IO window: 0x9000-0xafff
<6>pci 0000:00:1c.0:   MEM window: 0xfd900000-0xfd9fffff
<6>pci 0000:00:1c.0:   PREFETCH window: 0x000000fd800000-0x000000fd8fffff
<6>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
<6>pci 0000:00:1c.1:   IO window: 0x8000-0x8fff

...... <next post>

Motokultivator · January 14, 2009, 7:46pm


...... <above post>
<6>pci 0000:00:1c.1:   MEM window: 0xfde00000-0xfdefffff
<6>pci 0000:00:1c.1:   PREFETCH window: 0x000000fdd00000-0x000000fddfffff
<6>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
<6>pci 0000:00:1e.0:   IO window: 0x7000-0x7fff
<6>pci 0000:00:1e.0:   MEM window: 0xfdb00000-0xfdbfffff
<6>pci 0000:00:1e.0:   PREFETCH window: 0x000000fda00000-0x000000fdafffff
<6>pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
<7>pci 0000:00:01.0: setting latency timer to 64
<6>pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
<7>pci 0000:00:1c.0: setting latency timer to 64
<6>pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
<7>pci 0000:00:1c.1: setting latency timer to 64
<7>pci 0000:00:1e.0: setting latency timer to 64
<6>bus: 00 index 0 io port: [0, ffff]
<6>bus: 00 index 1 mmio: [0, ffffffffffffffff]
<6>bus: 01 index 0 io port: [6000, 6fff]
<6>bus: 01 index 1 mmio: [fdc00000, fdcfffff]
<6>bus: 01 index 2 mmio: [d0000000, dfffffff]
<6>bus: 01 index 3 mmio: [0, 0]
<6>bus: 02 index 0 io port: [9000, afff]
<6>bus: 02 index 1 mmio: [fd900000, fd9fffff]
<6>bus: 02 index 2 mmio: [fd800000, fd8fffff]
<6>bus: 02 index 3 mmio: [0, 0]
<6>bus: 03 index 0 io port: [8000, 8fff]
<6>bus: 03 index 1 mmio: [fde00000, fdefffff]
<6>bus: 03 index 2 mmio: [fdd00000, fddfffff]
<6>bus: 03 index 3 mmio: [0, 0]
<6>bus: 04 index 0 io port: [7000, 7fff]
<6>bus: 04 index 1 mmio: [fdb00000, fdbfffff]
<6>bus: 04 index 2 mmio: [fda00000, fdafffff]
<6>bus: 04 index 3 io port: [0, ffff]
<6>bus: 04 index 4 mmio: [0, ffffffffffffffff]
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>TCP: Hash tables configured (established 131072 bind 65536)
<6>TCP reno registered
<6>NET: Registered protocol family 1
<6>Unpacking initramfs... done
<6>Freeing initrd memory: 5578k freed
<6>Machine check exception polling timer started.
<6>audit: initializing netlink socket (disabled)
<5>type=2000 audit(1231959386.612:1): initialized
<4>highmem bounce pool size: 64 pages
<6>HugeTLB registered 2 MB page size, pre-allocated 0 pages
<5>VFS: Disk quotas dquot_6.5.1
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>msgmni has been set to 439
<6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
<6>io scheduler noop registered
<6>io scheduler anticipatory registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<7>pci 0000:01:00.0: Boot video device
<7>pcieport-driver 0000:00:01.0: setting latency timer to 64
<6>pcieport-driver 0000:00:01.0: found MSI capability
<7>pci_express 0000:00:01.0:pcie00: allocate port service
<7>pci_express 0000:00:01.0:pcie03: allocate port service
<7>pcieport-driver 0000:00:1c.0: setting latency timer to 64
<6>pcieport-driver 0000:00:1c.0: found MSI capability
<7>pci_express 0000:00:1c.0:pcie00: allocate port service
<7>pci_express 0000:00:1c.0:pcie02: allocate port service
<7>pci_express 0000:00:1c.0:pcie03: allocate port service
<7>pcieport-driver 0000:00:1c.1: setting latency timer to 64
<6>pcieport-driver 0000:00:1c.1: found MSI capability
<7>pci_express 0000:00:1c.1:pcie00: allocate port service
<7>pci_express 0000:00:1c.1:pcie02: allocate port service
<7>pci_express 0000:00:1c.1:pcie03: allocate port service
<6>vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 10240k, total 16384k
<6>vesafb: mode is 1280x1024x16, linelength=2560, pages=5
<6>vesafb: protected mode interface info at c000:a28c
<6>vesafb: pmi: set display start = c00ca314, set palette = c00ca3d0
<6>vesafb: scrolling: redraw
<6>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
<6>bootsplash 3.1.6-2004/03/31: looking for picture...
<6>bootsplash: silentjpeg size 113709 bytes
<6>bootsplash: ...found (1280x1024, 43709 bytes, v3).
<4>Console: switching to colour frame buffer device 156x60
<6>fb0: VESA VGA frame buffer device
<6>isapnp: Scanning for PnP cards...
<7>Switched to high resolution mode on CPU 1
<7>Switched to high resolution mode on CPU 0
<6>isapnp: No Plug & Play device found
<6>Serial: 8250/16550 driver8 ports, IRQ sharing enabled
<6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<6>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
<4>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>mice: PS/2 mouse device common for all mice
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<6>TCP cubic registered
<4>Using IPI No-Shortcut mode
<4>registered taskstats version 1
<6>Freeing unused kernel memory: 328k freed
<6>Write protecting the kernel text: 2400k
<6>Write protecting the kernel read-only data: 1776k
<6>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
<6>ACPI: No dock devices found.
<5>SCSI subsystem initialized
<7>libata version 3.00 loaded.
<7>ahci 0000:02:00.0: version 3.0
<6>vendor=8086 device=283f
<6>ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
<6>ahci 0000:02:00.0: JMB361 has only one port, port_map 0x3 -> 0x1
<6>ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
<6>ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
<7>ahci 0000:02:00.0: setting latency timer to 64
<6>scsi0 : ahci
<6>scsi1 : ahci
<6>ata1: SATA max UDMA/133 abar m8192@0xfd9fe000 port 0xfd9fe100 irq 16
<6>ata2: DUMMY
<6>ata1: SATA link down (SStatus 0 SControl 300)
<6>processor ACPI_CPU:00: registered as cooling_device0
<6>processor ACPI_CPU:01: registered as cooling_device1
<6>thermal LNXTHERM:01: registered as thermal_zone0
<4>ACPI: Unable to turn cooling device [f6c4ab94] 'on'
<6>ACPI: Thermal Zone [THRM] (59 C)
<6>pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
<6>vendor=8086 device=283f
<6>pata_jmicron 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
<7>pata_jmicron 0000:02:00.1: setting latency timer to 64
<6>scsi2 : pata_jmicron
<6>scsi3 : pata_jmicron
<6>ata3: PATA max UDMA/100 cmd 0xac00 ctl 0xa800 bmdma 0x9c00 irq 17
<6>ata4: PATA max UDMA/100 cmd 0xa400 ctl 0xa000 bmdma 0x9c08 irq 17
<6>ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33
<6>ata3.00: configured for UDMA/33
<5>scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H10N  JL10 PQ: 0 ANSI: 5
<7>ata_piix 0000:00:1f.2: version 2.12
<6>ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
<6>ata_piix 0000:00:1f.2: MAP  P0 P2 P1 P3 ]
<7>ata_piix 0000:00:1f.2: setting latency timer to 64
<6>scsi4 : ata_piix
<6>scsi5 : ata_piix
<6>ata5: SATA max UDMA/133 cmd 0xe800 ctl 0xe400 bmdma 0xd800 irq 19
<6>ata6: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd808 irq 19
<6>ata5.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
<6>ata5.01: SATA link down (SStatus 0 SControl 300)
<6>ata5.00: ATA-7: Maxtor 6V080E0, VA111900, max UDMA/133
<6>ata5.00: 160086528 sectors, multi 16: LBA48 NCQ (depth 0/32)
<6>ata5.00: configured for UDMA/133
<6>ata6.00: SATA link down (SStatus 0 SControl 300)
<6>ata6.01: SATA link down (SStatus 0 SControl 300)
<5>scsi 4:0:0:0: Direct-Access     ATA      Maxtor 6V080E0   VA11 PQ: 0 ANSI: 5
<6>ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
<6>ata_piix 0000:00:1f.5: MAP  P0 -- P1 -- ]
<7>ata_piix 0000:00:1f.5: setting latency timer to 64
<6>scsi6 : ata_piix
<6>scsi7 : ata_piix
<6>ata7: SATA max UDMA/133 cmd 0xcc00 ctl 0xc800 bmdma 0xbc00 irq 19
<6>ata8: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xbc08 irq 19
<6>ata7: SATA link down (SStatus 0 SControl 300)
<6>ata8: SATA link down (SStatus 0 SControl 300)
<6>Uniform Multi-Platform E-IDE driver
<6>fan PNP0C0B:00: registered as cooling_device2
<6>ACPI: Fan [FAN] (on)
<6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
<6>udevd version 128 started
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>USB Universal Host Controller Interface driver v3.0
<6>uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
<7>uhci_hcd 0000:00:1a.0: setting latency timer to 64
<6>uhci_hcd 0000:00:1a.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
<6>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fc00
<6>usb usb1: configuration #1 chosen from 1 choice
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 2 ports detected
<4>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
<5>sd 4:0:0:0: [sda] 160086528 512-byte hardware sectors: (81.9GB/76.3GiB)
<5>sd 4:0:0:0: [sda] Write Protect is off
<7>sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<5>sd 4:0:0:0: [sda] 160086528 512-byte hardware sectors: (81.9GB/76.3GiB)
<5>sd 4:0:0:0: [sda] Write Protect is off
<7>sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6> sda: sda1 sda2 < sda5 sda6 sda7<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<4> sda8<6>usb usb1: Product: UHCI Host Controller
<6>usb usb1: Manufacturer: Linux 2.6.27.7-9-pae uhci_hcd
<6>usb usb1: SerialNumber: 0000:00:1a.0
...... <next post>

Motokultivator · January 14, 2009, 7:47pm


...... <above post>

<6>uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
<7>uhci_hcd 0000:00:1a.1: setting latency timer to 64
<6>uhci_hcd 0000:00:1a.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
<6>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f800
<6>usb usb2: configuration #1 chosen from 1 choice
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 2 ports detected
<4> >
<5>sd 4:0:0:0: [sda] Attached SCSI disk
<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: UHCI Host Controller
<6>usb usb2: Manufacturer: Linux 2.6.27.7-9-pae uhci_hcd
<6>usb usb2: SerialNumber: 0000:00:1a.1
<6>ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
<7>ehci_hcd 0000:00:1a.7: setting latency timer to 64
<6>ehci_hcd 0000:00:1a.7: EHCI Host Controller
<6>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
<6>ehci_hcd 0000:00:1a.7: debug port 1
<7>ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
<6>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
<6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb3: configuration #1 chosen from 1 choice
<6>hub 3-0:1.0: USB hub found
<6>hub 3-0:1.0: 4 ports detected
<6>usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb3: Product: EHCI Host Controller
<6>usb usb3: Manufacturer: Linux 2.6.27.7-9-pae ehci_hcd
<6>usb usb3: SerialNumber: 0000:00:1a.7
<6>uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
<7>uhci_hcd 0000:00:1d.0: setting latency timer to 64
<6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
<6>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f400
<6>usb usb4: configuration #1 chosen from 1 choice
<6>hub 4-0:1.0: USB hub found
<6>hub 4-0:1.0: 2 ports detected
<6>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb4: Product: UHCI Host Controller
<6>usb usb4: Manufacturer: Linux 2.6.27.7-9-pae uhci_hcd
<6>usb usb4: SerialNumber: 0000:00:1d.0
<6>uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
<7>uhci_hcd 0000:00:1d.1: setting latency timer to 64
<6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
<6>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f000
<6>usb usb5: configuration #1 chosen from 1 choice
<6>hub 5-0:1.0: USB hub found
<6>hub 5-0:1.0: 2 ports detected
<6>usb 4-1: new full speed USB device using uhci_hcd and address 2
<6>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb5: Product: UHCI Host Controller
<6>usb usb5: Manufacturer: Linux 2.6.27.7-9-pae uhci_hcd
<6>usb usb5: SerialNumber: 0000:00:1d.1
<6>uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
<7>uhci_hcd 0000:00:1d.2: setting latency timer to 64
<6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
<6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
<6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00
<6>usb usb6: configuration #1 chosen from 1 choice
<6>hub 6-0:1.0: USB hub found
<6>hub 6-0:1.0: 2 ports detected
<6>usb 4-1: configuration #1 chosen from 1 choice
<6>usb 4-1: New USB device found, idVendor=046d, idProduct=08f6
<6>usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
<6>usb 4-1: Product: Camera
<6>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
<6>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb6: Product: UHCI Host Controller
<6>usb usb6: Manufacturer: Linux 2.6.27.7-9-pae uhci_hcd
<6>usb usb6: SerialNumber: 0000:00:1d.2
<6>ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
<7>ehci_hcd 0000:00:1d.7: setting latency timer to 64
<6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
<6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
<6>ehci_hcd 0000:00:1d.7: debug port 1
<7>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
<6>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
<6>usb 4-2: new low speed USB device using uhci_hcd and address 3
<6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
<6>usb usb7: configuration #1 chosen from 1 choice
<6>hub 7-0:1.0: USB hub found
<6>hub 7-0:1.0: 6 ports detected
<3>hub 4-0:1.0: unable to enumerate USB device on port 2
<6>usb 4-1: USB disconnect, address 2
<6>usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb7: Product: EHCI Host Controller
<6>usb usb7: Manufacturer: Linux 2.6.27.7-9-pae ehci_hcd
<6>usb usb7: SerialNumber: 0000:00:1d.7
<6>PM: Starting manual resume from disk
<5>REISERFS (device sda8): found reiserfs format "3.6" with standard journal
<5>REISERFS (device sda8): using ordered data mode
<5>REISERFS (device sda8): journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
<5>REISERFS (device sda8): checking transaction log (sda8)
<5>REISERFS (device sda8): Using r5 hash to sort names
<6>usb 4-1: new full speed USB device using uhci_hcd and address 4
<6>usb 4-1: configuration #1 chosen from 1 choice
<6>usb 4-1: New USB device found, idVendor=046d, idProduct=08f6
<6>usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
<6>usb 4-1: Product: Camera
<6>usb 4-2: new low speed USB device using uhci_hcd and address 5
<6>usb 4-2: configuration #1 chosen from 1 choice
<6>usb 4-2: New USB device found, idVendor=05e3, idProduct=1205
<6>usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
<6>usb 4-2: Product: USB Mouse              
<4>ACPI: Unable to turn cooling device [f6c4ab94] 'on'
<6>udevd version 128 started
<6>FDC 0 is a post-1991 82077
<5>scsi 2:0:0:0: Attached scsi generic sg0 type 5
<5>sd 4:0:0:0: Attached scsi generic sg1 type 0
<6>iTCO_vendor_support: vendor-support=0
<6>Linux video capture interface: v2.00
<6>input: PC Speaker as /devices/platform/pcspkr/input/input1
<6>Linux agpgart interface v0.103
<6>i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
<6>vendor=8086 device=2841
<6>sky2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
<7>sky2 0000:03:00.0: setting latency timer to 64
<6>sky2 0000:03:00.0: v1.22 addr 0xfdefc000 irq 17 Yukon-2 EC Ultra rev 2
<6>sky2 eth0: addr 00:15:58:6d:28:53
<6>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
<6>iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460)
<6>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
<6>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
<4>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
<6>Uniform CD-ROM driver Revision: 3.20
<7>sr 2:0:0:0: Attached scsi CD-ROM sr0
<6>parport_pc 00:09: reported by Plug and Play ACPI
<6>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
<6>ACPI: Power Button (FF) [PWRF]
<6>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
<6>vendor=8086 device=244e
<6>ohci1394 0000:04:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
<7>ohci1394 0000:04:01.0: setting latency timer to 64
<6>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[fdbff000-fdbff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
<6>quickcam_messenger: Logitech Quickcam Messenger USB v0.01
<6>usbcore: registered new interface driver QCM
<6>ppdev: user-space parallel port driver
<6>ACPI: Power Button (CM) [PWRB]
<6>usbcore: registered new interface driver hiddev
<6>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
<6>rtc0: alarms up to one month
<6>input: USB Mouse               as /devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2:1.0/input/input4
<6>input,hidraw0: USB HID v1.10 Mouse [USB Mouse              ] on usb-0000:00:1d.0-2
<6>usbcore: registered new interface driver usbhid
<6>usbhid: v2.6:USB HID core driver
<6>HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
<7>HDA Intel 0000:00:1b.0: setting latency timer to 64
<6>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
<7>ALSA sound/pci/hda/hda_codec.c:3047: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0)
<7>ALSA sound/pci/hda/hda_codec.c:3051:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
<7>ALSA sound/pci/hda/hda_codec.c:3055:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
<7>ALSA sound/pci/hda/hda_codec.c:3056:    mono: mono_out=0x0
<7>ALSA sound/pci/hda/hda_codec.c:3064:    inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x1c, aux=0x0
<6>usbcore: registered new interface driver snd-usb-audio
<7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00016c20002246af]
<6>Adding 1052216k swap on /dev/sda6.  Priority:-1 extents:1 across:1052216k
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
<6>loop: module loaded
<6>kjournald starting.  Commit interval 5 seconds
<6>EXT3 FS on sda7, internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<4>fuse init (API version 7.9)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.

Boot logging started on /dev/tty1(/dev/console) at Wed Jan 14 18:56:32 2009
...... <next post>

Motokultivator · January 14, 2009, 7:48pm


...... <above post>

Trying manual resume from /dev/disk/by-id/ata-Maxtor_6V080E0_V22WTYPG-part6
Invoking userspace resume from /dev/disk/by-id/ata-Maxtor_6V080E0_V22WTYPG-part6
resume: libgcrypt version: 1.4.1
Trying manual resume from /dev/disk/by-id/ata-Maxtor_6V080E0_V22WTYPG-part6
Invoking in-kernel resume from /dev/disk/by-id/ata-Maxtor_6V080E0_V22WTYPG-part6
Waiting for device /dev/disk/by-id/ata-Maxtor_6V080E0_V22WTYPG-part8 to appear:  ok
fsck 1.41.1 (01-Sep-2008)
[/sbin/fsck.reiserfs (1) -- /] fsck.reiserfs -a /dev/disk/by-id/ata-Maxtor_6V080E0_V22WTYPG-part8 
Reiserfs super block in block 16 on 0x808 of format 3.6 with standard journal
Blocks (total/free): 6558528/5245133 by 4096 bytes
Filesystem is clean
fsck succeeded. Mounting root device read-write.
Mounting root /dev/disk/by-id/ata-Maxtor_6V080E0_V22WTYPG-part8

Boot logging started on /dev/tty1(/dev/console (deleted)) at Wed Jan 14 19:56:34 2009

done
Starting udevd: done
Loading drivers, configuring devices: done
Loading required kernel modules
doneActivating swap-devices in /etc/fstab...
doneSetting up the hardware clockdone
Activating device mapper...
done
Checking file systems...
fsck 1.41.1 (01-Sep-2008)
/dev/disk/by-id/ata-Maxtor_6V080E0_V22WTYPG-part7: Superblock last mount time is in the future.  FIXED.
/dev/disk/by-id/ata-Maxtor_6V080E0_V22WTYPG-part7: Superblock last write time is in the future.  FIXED.
/dev/disk/by-id/ata-Maxtor_6V080E0_V22WTYPG-part7: clean, 10025/1310720 files, 1427382/5241198 blocks
donedone
Mounting local file systems...
/proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda7 on /home type ext3 (rw,acl,user_xattr)
/dev/sda5 on /windows/D type vfat (rw,noexec,nosuid,nodev,gid=100,umask=0002,utf8=true)
doneFuse filesystem already availabledone
Mounting fuse control filesystemdone
Setting current sysctl status from /etc/sysctl.conf
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.conf.all.rp_filter = 1
fs.inotify.max_user_watches = 65536
net.ipv4.conf.default.promote_secondaries = 1
net.ipv4.conf.all.promote_secondaries = 1
done
Enabling syn flood protectiondone
Disabling IP forwardingdone
done
Activating remaining swap-devices in /etc/fstab...
done<notice>killproc: kill(662,29)
Creating /var/log/boot.msg
doneMounting securityfs on /sys/kernel/security done
Loading AppArmor profiles Setting up hostname 'linux-e49g'done
Setting up loopback interface     lo        
    lo        IP address: 127.0.0.1/8   
              IP address: 127.0.0.2/8   
done
done
System Boot Control: The system has been set up
Skipped features: boot.cycle
System Boot Control: Running /etc/init.d/boot.local
done<notice>killproc: kill(662,3)

INIT: Entering runlevel: 5



Boot logging started on /dev/tty1(/dev/console) at Wed Jan 14 18:56:42 2009

Master Resource Control: previous runlevel: N, switching to runlevel: 5
Starting syslog services<notice>startproc: execve (/sbin/syslog-ng)  /sbin/syslog-ng ],  CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-Maxtor_6V080E0_V22WTYPG-part8 _=/sbin/startproc DAEMON=/sbin/syslog-ng ]
<notice>startproc: execve (/sbin/klogd)  /sbin/klogd -c 1 -x ],  CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PWD=/ PREVLEVEL=N LINES=60 SHLVL=2 HOME=/ SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-Maxtor_6V080E0_V22WTYPG-part8 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
Starting D-Bus daemondone
Starting acpid <notice>startproc: execve (/sbin/acpid)  /sbin/acpid ],  CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-Maxtor_6V080E0_V22WTYPG-part8 _=/sbin/startproc DAEMON=/sbin/acpid ]
done
Loading CPUFreq modulesInitializing random number generatordone
Starting Firewall Initialization (phase 1 of 2) done
 (CPUFreq not supported)
Starting HAL daemondone
Setting up (localfs) network interfaces:
    lo        
    lo        IP address: 127.0.0.1/8   
              IP address: 127.0.0.2/8   
done    eth0      device: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
    eth0      Starting DHCP4 client. <notice>startproc: execve (/usr/bin/kdm)  /usr/bin/kdm ],  CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs TERM=linux SHELL=/bin/sh ROOTFS_FSCK=0 INIT_VERSION=sysvinit-2.86 KDEROOTHOME=/root/.kdm REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin DO_CONFIRM= vga=0x31a RUNLEVEL=5 SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PWD=/ LANG=bs_BA.UTF-8 PREVLEVEL=N LINES=60 QT_SYSTEM_DIR=/usr/share/desktop-data SHLVL=2 HOME=/ XCURSOR_THEME=DMZ WINDOWMANAGER=/usr/bin/startkde SPLASH=yes splash=silent ROOTFS_BLKDEV=/dev/disk/by-id/ata-Maxtor_6V080E0_V22WTYPG-part8 _=/sbin/startproc DAEMON=/usr/bin/kdm ]
. . <notice>checkproc: /usr/bin/kdm 2826
. . . . .  
    eth0      DHCP4 continues in background
waiting
Waiting for mandatory devices:  eth0 __NSC__
11 10 9 8 6 5 4 3 1 0 
    eth0      device: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
    eth0      DHCP4 client (dhcpcd) is running
    eth0      . . . but is still waiting for data
waiting
    eth0      interface could not be set up until now
failedSetting up service (localfs) network  .  .  .  .  .  .  .  .  .  .failed
Starting service kdmdone
<notice>startproc: execve (/sbin/rpcbind)  /sbin/rpcbind ],  CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-Maxtor_6V080E0_V22WTYPG-part8 _=/sbin/startproc DAEMON=/sbin/rpcbind ]
<notice>startproc: execve (/sbin/auditd)  /sbin/auditd -s disable ],  CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-Maxtor_6V080E0_V22WTYPG-part8 _=/sbin/startproc DAEMON=/sbin/auditd ]
Starting rpcbind done
Starting auditd done
Not starting NFS client services - no NFS found in /etc/fstab:unused
Loading console font lat1-16.psfu  -m none G0:iso8859-1
doneLoading keymap i386/qwerty/sr-cy.map.gz
doneLoading compose table latin1.adddone
Start Unicode mode
done<notice>checkproc: /usr/bin/kdm 2826
Starting Avahi daemon done
Starting cupsd<notice>startproc: execve (/usr/sbin/cupsd)  /usr/sbin/cupsd ],  CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-Maxtor_6V080E0_V22WTYPG-part8 _=/sbin/startproc DAEMON=/usr/sbin/cupsd ]
done
Starting java.binfmt_misc done
Setting up (remotefs) network interfaces:
    dsl0      name: DSL Connection
    dsl0      Startmode is 'manual'
skippedSetting up service (remotefs) network  .  .  .  .  .  .  .  .  .  .done
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd)  /usr/sbin/nscd ],  CONSOLE=/dev/console ROOTFS_FSTYPE=reiserfs SHELL=/bin/sh TERM=linux ROOTFS_FSCK=0 LC_ALL=POSIX INIT_VERSION=sysvinit-2.86 REDIRECT=/dev/tty1 COLUMNS=156 PATH=/bin:/sbin:/usr/bin:/usr/sbin vga=0x31a DO_CONFIRM= RUNLEVEL=5 PWD=/ SPLASHCFG=/etc/bootsplash/themes/openSUSE/config/bootsplash-1280x1024.cfg PREVLEVEL=N LINES=60 HOME=/ SHLVL=2 splash=silent SPLASH=yes ROOTFS_BLKDEV=/dev/disk/by-id/ata-Maxtor_6V080E0_V22WTYPG-part8 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
Starting mail service (Postfix)
INIT: Switching to runlevel: 0



INIT: Sending processes the TERM signal


Master Resource Control: runlevel 5 has been reached
<notice>killproc: kill(2016,3)

Boot logging started on /dev/tty1(/dev/console) at Wed Jan 14 18:57:29 2009

Master Resource Control: previous runlevel: 5, switching to runlevel: 0
Shutting down service kdm<notice>killproc: kill(2826,15)
done
Shutting down CRON daemondone
Shutting down smartd done
Shutting down cupsd<notice>killproc: kill(4327,15)
done
Shutting down mail service (Postfix)<notice>killproc: kill(4793,15)
done
Shutting down SMPPPDdone
Shutting down the Firewall skipped
Shutting down sound driverdone
Shutting down auditd <notice>killproc: kill(3970,15)
done
...... <next post>

Motokultivator · January 14, 2009, 7:49pm


...... <above post>

Shutting down Avahi daemon done
Shutting down service kdmdone
Shutting down java.binfmt_misc done
/etc/init.d/kbd stopdone
Shutting down (remotefs) network interfaces:
Shutting down SSH daemondone
<notice>killproc: kill(4669,15)
<notice>killproc: kill(2065,15)
Saving random seeddone
Not stopping NFS client services:unused
<notice>killproc: kill(2185,15)
done
<notice>killproc: kill(3978,15)
Shutting down acpid done
Shutting down Name Service Cache Daemondone
Shutting down HAL daemondone
Shutting down rpcbind done
Shutting down syslog services<notice>killproc: kill(2042,15)
<notice>killproc: kill(2039,15)
done
Shutting down (localfs) network interfaces:
    eth0      device: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
doneShutting down service (localfs) network  .  .  .  .  .  .  .  .  .done
<notice>killproc: kill(2053,15)
Shutting down D-Bus daemondone
<notice>killproc: kill(4811,3)

Motokultivator · January 14, 2009, 7:49pm

/var/log/kdm.log

********************************************************************************
Note that your system uses syslog. All of kdm's internally generated messages
(i.e., not from libraries and external programs/scripts it uses) go to the
daemon.* syslog facility; check your syslog configuration to find out to which
file(s) it is logged. PAM logs messages related to authentication to authpriv.*.
********************************************************************************

/usr/share/kde4/apps/kdm/read_sysconfig.sh: line 75: pam-config: command not found

X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux linux-e49g 2.6.27.7-9-pae #1 SMP 2008-12-04 18:10:04 +0100 i686
Build Date: 03 December 2008  09:21:06AM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 14 18:56:49 2009
(==) Using config file: "/etc/X11/xorg.conf"
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
FATAL: Module fglrx not found.
(EE) fglrx(0): [FB] Can not get FB MC address range.
(EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized. 
(EE) fglrx(0): XMM failed to open CMMQS connection.
Could not init font path element /usr/share/fonts/TTF/, removing from list!
Could not init font path element /usr/share/fonts/OTF, removing from list!
Driver not XRANDR 1.2 capable, ignoring DISPLAYMANAGER_RANDR_MODE_* settings
(EE) fglrx(0): firegl_SetSuspendResumeState FAILED -9.

Motokultivator · January 14, 2009, 7:50pm

/var/log/localmessages

Jan 14 18:56:46 linux-e49g dhcpcd[2788]: eth0: dhcpcd 3.2.3 starting
Jan 14 18:56:46 linux-e49g dhcpcd[2788]: eth0: hardware address = 00:15:58:6d:28:53
Jan 14 18:56:46 linux-e49g dhcpcd[2788]: eth0: broadcasting for a lease
Jan 14 18:57:06 linux-e49g dhcpcd[2788]: eth0: timed out
Jan 14 18:57:06 linux-e49g dhcpcd[2788]: eth0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-eth0.info'
Jan 14 18:57:06 linux-e49g dhcpcd[2788]: eth0: broadcasting for a lease
Jan 14 18:57:26 linux-e49g dhcpcd[2788]: eth0: timed out
Jan 14 18:57:26 linux-e49g dhcpcd[2788]: eth0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-eth0.info'
Jan 14 18:57:26 linux-e49g dhcpcd[2788]: eth0: broadcasting for a lease

/var/log/mail

Jan 14 18:57:29 linux-e49g postfix/postfix-script[4775]: starting the Postfix mail system
Jan 14 18:57:29 linux-e49g postfix/master[4793]: daemon started -- version 2.5.5, configuration /etc/postfix
Jan 14 18:57:30 linux-e49g postfix/master[4793]: terminating on signal 15

/var/log/mail.info

Jan 14 18:57:29 linux-e49g postfix/postfix-script[4775]: starting the Postfix mail system
Jan 14 18:57:29 linux-e49g postfix/master[4793]: daemon started -- version 2.5.5, configuration /etc/postfix
Jan 14 18:57:30 linux-e49g postfix/master[4793]: terminating on signal 15

/var/log/pm-powersave.log

**sched policy powersave OFF
**set power mode for sound driver to 0 seconds

/var/log/warn

**sched policy powersave OFF
**set power mode for sound driver to 0 seconds

Motokultivator · January 14, 2009, 7:51pm

/var/log/Xorg.0.log


X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux linux-e49g 2.6.27.7-9-pae #1 SMP 2008-12-04 18:10:04 +0100 i686
Build Date: 03 December 2008  09:21:06AM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 14 18:56:49 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout[all]"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) |   |-->Monitor "aticonfig-Monitor[0]-0"
(**) |   |-->Device "aticonfig-Device[0]-0"
(**) |-->Input Device "Keyboard[0]"
(**) |-->Input Device "Mouse[1]"
(**) Option "ZapWarning" "on"
(**) Option "AllowMouseOpenFail" "on"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/local" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/PEX" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latin2/misc" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latin2/75dpi" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latin2/100dpi" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latin2/Type1" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latin7/75dpi" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/baekmuk" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/japanese" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/kwintv" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/uni" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/CID" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ucs/misc" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ucs/75dpi" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ucs/100dpi" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/hellas/misc" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/hellas/75dpi" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/hellas/100dpi" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/hellas/Type1" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
	Entry deleted from font path.
(WW) The directory "/usr/share/fonts/xtest" does not exist.
	Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc:unscaled,/usr/share/fonts/TTF/,/usr/share/fonts/OTF,/usr/share/fonts/Type1/,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled.
(**) FontPath set to:
	/usr/share/fonts/misc:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/Type1,
	/usr/share/fonts/URW,
	/usr/share/fonts/Speedo,
	/usr/share/fonts/cyrillic,
	/usr/share/fonts/truetype,
	/opt/kde3/share/fonts,
	/usr/share/fonts/misc:unscaled,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled
(**) Input device list set to "/dev/gpmdata,/dev/input/mice"
(==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81f45c0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 4.1
	X.Org XInput driver : 2.1
	X.Org Server Extension : 1.1
	X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@1:0:0) unknown vendor (0x1002) unknown chipset (0x71c3) rev 158, Mem @ 0xd0000000/0, 0xfdcf0000/0, I/O @ 0x00006c00/0, BIOS @ 0x????????/131072
(--) PCI: (0@1:0:1) unknown vendor (0x1002) unknown chipset (0x71e3) rev 158, Mem @ 0xfdce0000/0
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX**
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX**
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX**
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX**
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX**
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX**
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dri"

(II) Loading /usr/lib/xorg/modules//extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"

(II) Loading /usr/lib/xorg/modules//extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "freetype"

(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.5.2, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "extmod"

(II) Loading /usr/lib/xorg/modules//extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules//extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "record"

(II) Loading /usr/lib/xorg/modules//extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "fglrx"

(II) Loading /usr/lib/xorg/modules//drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 1.4.99.906, module version = 8.56.4
	Module class: X.Org Video Driver
(II) LoadModule: "kbd"

(II) Loading /usr/lib/xorg/modules//input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.3.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "mouse"

(II) Loading /usr/lib/xorg/modules//input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.3.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.1
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.56.4
(II) ATI Proprietary Linux Driver Release Identifier: 8.561                                
(II) ATI Proprietary Linux Driver Build Date: Dec  1 2008 14:55:43
(WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
(WW) Video driver ABI version of the X server is 4.1
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x71C3) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX**
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX**
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX**
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX**
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX**
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX**
(II) fglrx(0): pEnt->device->identifier=0x8225070
...... <next post>

Motokultivator · January 14, 2009, 7:52pm


...... <above post>
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX**
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX**
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX**
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX**
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS**
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS**
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS**
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX**
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX**
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS**
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS**
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"

(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 0.1.0
	ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(II) fglrx(0): 10BitPixelFormat disabled by default
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"

(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 1.4.99.906, module version = 8.56.4
	ABI class: X.Org Server Extension, version 1.1
(--) fglrx(0): Chipset: "Radeon X1600 Series" (Chipset = 0x71c3)
(--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x01a8)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfdcf0000
(--) fglrx(0): I/O port at 0x00006c00
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"

(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.1.0
	ABI class: X.Org Video Driver, version 4.1
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 9.13
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
(II) fglrx(0): VESA VBE OEM Product: RV535
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -6
(WW) fglrx(0): Failed to open DRM connection
(EE) fglrx(0): [FB] Can not get FB MC address range.
(--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000001, disabled=0x00000000
(II) fglrx(0): Connected Display1: CRT on primary DAC [crt1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: GSM  Model: 4b31  Serial#: 102337
(II) fglrx(0): Year: 2008  Week: 9
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync:  Separate  Composite  SyncOnGreen
(II) fglrx(0): Max Image Size [cm]: horiz.: 38  vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.639 redY: 0.342   greenX: 0.297 greenY: 0.615
(II) fglrx(0): blueX: 0.146 blueY: 0.068   whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640  vsize 480  refresh: 75  vid: 20273
(II) fglrx(0): #1: hsize: 800  vsize 600  refresh: 75  vid: 20293
(II) fglrx(0): #2: hsize: 1024  vsize 768  refresh: 75  vid: 20321
(II) fglrx(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
(II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz
(II) fglrx(0): Monitor name: L1918S
(II) fglrx(0): Monitor name: 
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 	00ffffffffffff001e6d314bc18f0100
(II) fglrx(0): 	091201036e261e78eaa2a5a3574c9d25
(II) fglrx(0): 	115054bfef80314f454f614f81800101
(II) fglrx(0): 	010101010101302a009851002a403070
(II) fglrx(0): 	1300782d1100001e000000fd00384b1e
(II) fglrx(0): 	530e000a202020202020000000fc004c
(II) fglrx(0): 	31393138530a202020202020000000fc
(II) fglrx(0): 	00200a202020202020202020202000c1

...... <next post>

Motokultivator · January 14, 2009, 7:53pm


...... <above post>
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - CRT on primary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay version 3.  1 power state available:
(II) fglrx(0):   1. 500/398MHz @ 0Hz [low voltage, enable load balancing]
(==) fglrx(0): QBS disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled 
(==) fglrx(0): TMDS coherent mode is enabled 
(II) fglrx(0): Total of 32 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 (80.0 kHz)
(**) fglrx(0):  Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024"x70.0  128.94  1280 1368 1504 1728  1024 1025 1028 1066 +hsync (74.6 kHz)
(**) fglrx(0):  Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0): *Mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 (60.0 kHz)
(**) fglrx(0): *Mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0   79.50  1280 1344 1472 1664  768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0): *Mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 (67.5 kHz)
(**) fglrx(0):  Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864"x70.0   96.76  1152 1224 1344 1536  864 865 868 900 +hsync (63.0 kHz)
(**) fglrx(0):  Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 (60.0 kHz)
(**) fglrx(0):  Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"x72.0   78.43  1024 1080 1192 1360  768 769 772 801 +hsync (57.7 kHz)
(**) fglrx(0):  Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0   75.00  1024 1048 1184 1328  768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0):  Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 (46.9 kHz)
(**) fglrx(0):  Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"x72.0   50.00  800 856 976 1040  600 637 643 666 (48.1 kHz)
(**) fglrx(0):  Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0   45.50  800 840 920 1040  600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0):  Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 (37.9 kHz)
(**) fglrx(0):  Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0   36.00  800 824 896 1024  600 601 603 625 (35.2 kHz)
(**) fglrx(0): *Mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0   26.71  720 736 808 896  480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 +hsync +vsync (37.5 kHz)
(**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"x72.0   31.50  640 664 704 832  480 489 492 520 +hsync +vsync (37.9 kHz)
(**) fglrx(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0   25.18  640 656 752 800  480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0):  Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"x75.0   28.07  640 696 736 832  400 413 415 449 (33.7 kHz)
(**) fglrx(0):  Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0   24.92  640 664 760 792  400 460 462 525 (31.5 kHz)
(**) fglrx(0):  Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384"x75.0   19.68  512 528 576 632  384 384 385 416 (31.1 kHz)
(**) fglrx(0):  Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0   19.81  512 544 624 664  384 451 453 497 (29.8 kHz)
(**) fglrx(0):  Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x75.0   24.75  400 408 448 528  300 601 602 625 doublescan (46.9 kHz)
(**) fglrx(0):  Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0   22.33  400 416 480 496  300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0):  Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x75.0   15.75  320 328 360 416  240 481 482 501 doublescan (37.9 kHz)
(**) fglrx(0):  Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0   12.59  320 328 376 400  240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0):  Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x75.0   13.10  320 352 368 416  200 406 407 417 doublescan (31.5 kHz)
(**) fglrx(0):  Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0   12.59  320 336 384 400  200 457 459 524 doublescan (31.5 kHz)
(--) fglrx(0): Display dimensions: (380, 300) mm
(--) fglrx(0): DPI set to (85, 86)
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 (80.0 kHz)
(**) fglrx(0):  Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024"x70.0  128.94  1280 1368 1504 1728  1024 1025 1028 1066 +hsync (74.6 kHz)
(**) fglrx(0):  Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0): *Mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 (60.0 kHz)
(**) fglrx(0): *Mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0   79.50  1280 1344 1472 1664  768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0): *Mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 (67.5 kHz)
(**) fglrx(0):  Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864"x70.0   96.76  1152 1224 1344 1536  864 865 868 900 +hsync (63.0 kHz)
(**) fglrx(0):  Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 (60.0 kHz)
(**) fglrx(0):  Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"x72.0   78.43  1024 1080 1192 1360  768 769 772 801 +hsync (57.7 kHz)
(**) fglrx(0):  Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0   75.00  1024 1048 1184 1328  768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0):  Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 (46.9 kHz)
(**) fglrx(0):  Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz

...... <next post>

Motokultivator · January 14, 2009, 7:53pm


...... <above post>
(II) fglrx(0): Modeline "800x600"x72.0   50.00  800 856 976 1040  600 637 643 666 (48.1 kHz)
(**) fglrx(0):  Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0   45.50  800 840 920 1040  600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0):  Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 (37.9 kHz)
(**) fglrx(0):  Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0   36.00  800 824 896 1024  600 601 603 625 (35.2 kHz)
(**) fglrx(0): *Mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0   26.71  720 736 808 896  480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 +hsync +vsync (37.5 kHz)
(**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"x72.0   31.50  640 664 704 832  480 489 492 520 +hsync +vsync (37.9 kHz)
(**) fglrx(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0   25.18  640 656 752 800  480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0):  Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"x75.0   28.07  640 696 736 832  400 413 415 449 (33.7 kHz)
(**) fglrx(0):  Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0   24.92  640 664 760 792  400 460 462 525 (31.5 kHz)
(**) fglrx(0):  Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384"x75.0   19.68  512 528 576 632  384 384 385 416 (31.1 kHz)
(**) fglrx(0):  Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0   19.81  512 544 624 664  384 451 453 497 (29.8 kHz)
(**) fglrx(0):  Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x75.0   24.75  400 408 448 528  300 601 602 625 doublescan (46.9 kHz)
(**) fglrx(0):  Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0   22.33  400 416 480 496  300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0):  Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x75.0   15.75  320 328 360 416  240 481 482 501 doublescan (37.9 kHz)
(**) fglrx(0):  Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0   12.59  320 328 376 400  240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0):  Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x75.0   13.10  320 352 368 416  200 406 407 417 doublescan (31.5 kHz)
(**) fglrx(0):  Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0   12.59  320 336 384 400  200 457 459 524 doublescan (31.5 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"

(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.5.2, module version = 1.2.1
	ABI class: X.Org Video Driver, version 4.1
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"

(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(WW) fglrx(0): No DRM connection for driver fglrx.
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(II) fglrx(0): Direct rendering disabled
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX**
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX**
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX**
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX**
	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS**(OprU)
	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS**(OprU)
	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS**(OprU)
	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX**
	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX**
	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS**(OprU)
	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS**(OprU)
(II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
(II) fglrx(0): detected X.org 7.4.2.0
(EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized. 
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0x0 FBMappedSize: 0x10000000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 7167
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(WW) fglrx(0): Textured Video not supported without DRI enabled.
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	Solid Horizontal and Vertical Lines
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) LoadModule: "amdxmm"

(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
	compiled for 1.4.99.906, module version = 1.0.0
	ABI class: X.Org Server Extension, version 1.1
(EE) fglrx(0): XMM failed to open CMMQS connection.
(II) fglrx(0): XMM failed to initialize!
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) fglrx(0): Restoring recent mode: 1280x1024@75Hz
(**) Option "CoreKeyboard"
(**) Keyboard[0]: always reports core events
(**) Option "Protocol" "Standard"
(**) Keyboard[0]: Protocol: Standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) Keyboard[0]: XkbRules: "xfree86"
(**) Option "XkbModel" "microsoftpro"
(**) Keyboard[0]: XkbModel: "microsoftpro"
(**) Option "XkbLayout" "us"
(**) Keyboard[0]: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard[0]: CustomKeycodes disabled
(**) Option "Protocol" "explorerps/2"
(**) Mouse[1]: Device: "/dev/input/mice"
(**) Mouse[1]: Protocol: "explorerps/2"
(**) Option "CorePointer"
(**) Mouse[1]: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Buttons" "5"
(==) Mouse[1]: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse[1]: ZAxisMapping: buttons 4 and 5
(**) Mouse[1]: Buttons: 9
(**) Mouse[1]: Sensitivity: 1
(II) evaluating device (Keyboard[0])
(II) XINPUT: Adding extended input device "Keyboard[0]" (type: KEYBOARD)
(II) evaluating device (Mouse[1])
(II) XINPUT: Adding extended input device "Mouse[1]" (type: MOUSE)
(II) Mouse[1]: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/TTF/, removing from list!
Could not init font path element /usr/share/fonts/OTF, removing from list!
(EE) fglrx(0): firegl_SetSuspendResumeState FAILED -9.
(II) UnloadModule: "mouse"
(II) UnloadModule: "kbd"

Motokultivator · January 14, 2009, 7:54pm

/var/log/messages

Jan 14 18:56:42 linux-e49g syslog-ng[2039]: syslog-ng starting up; version='2.0.9'
Jan 14 18:56:43 linux-e49g rchal: CPU frequency scaling is not supported by your processor.
Jan 14 18:56:43 linux-e49g rchal: boot with 'CPUFREQ=no' in to avoid this warning.
Jan 14 18:56:43 linux-e49g rchal: Cannot load cpufreq governors - No cpufreq driver available
Jan 14 18:56:44 linux-e49g SuSEfirewall2: batch committing...
Jan 14 18:56:45 linux-e49g SuSEfirewall2: Firewall rules set to CLOSE.
Jan 14 18:56:45 linux-e49g ifup:     lo        
Jan 14 18:56:45 linux-e49g ifup:     lo        
Jan 14 18:56:45 linux-e49g ifup: IP address: 127.0.0.1/8  
Jan 14 18:56:45 linux-e49g ifup:  
Jan 14 18:56:45 linux-e49g ifup:               
Jan 14 18:56:45 linux-e49g ifup: IP address: 127.0.0.2/8  
Jan 14 18:56:45 linux-e49g ifup:  
Jan 14 18:56:45 linux-e49g ifup:     eth0      device: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
Jan 14 18:56:46 linux-e49g ifup-dhcp:     eth0      Starting DHCP4 client
Jan 14 18:56:46 linux-e49g dhcpcd[2788]: eth0: dhcpcd 3.2.3 starting
Jan 14 18:56:46 linux-e49g dhcpcd[2788]: eth0: hardware address = 00:15:58:6d:28:53
Jan 14 18:56:46 linux-e49g dhcpcd[2788]: eth0: broadcasting for a lease
Jan 14 18:56:47 linux-e49g ifup-dhcp: . 
Jan 14 18:56:47 linux-e49g kernel: klogd 1.4.1, log source = /proc/kmsg started.
Jan 14 18:56:47 linux-e49g kernel: ACPI: Unable to turn cooling device [f6c4ab94] 'on'
Jan 14 18:56:47 linux-e49g kernel: type=1505 audit(1231955801.595:2): operation="profile_load" name="/bin/ping" name2="default" pid=1883
Jan 14 18:56:47 linux-e49g kernel: type=1505 audit(1231955801.639:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1884
Jan 14 18:56:47 linux-e49g kernel: type=1505 audit(1231955801.723:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1885
Jan 14 18:56:47 linux-e49g kernel: type=1505 audit(1231955801.819:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1886
Jan 14 18:56:47 linux-e49g kernel: type=1505 audit(1231955801.927:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1906
Jan 14 18:56:47 linux-e49g kernel: type=1505 audit(1231955802.035:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1934
Jan 14 18:56:47 linux-e49g kernel: type=1505 audit(1231955802.123:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1959
Jan 14 18:56:47 linux-e49g kernel: type=1505 audit(1231955802.223:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1978
Jan 14 18:56:47 linux-e49g kernel: type=1505 audit(1231955802.339:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1986
Jan 14 18:56:47 linux-e49g kernel: type=1505 audit(1231955802.419:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1987
Jan 14 18:56:47 linux-e49g kernel: powernow: This module only works with AMD K7 CPUs
Jan 14 18:56:47 linux-e49g kernel: NET: Registered protocol family 10
Jan 14 18:56:47 linux-e49g kernel: lo: Disabled Privacy Extensions
Jan 14 18:56:47 linux-e49g kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Jan 14 18:56:47 linux-e49g kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 14 18:56:47 linux-e49g kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Jan 14 18:56:47 linux-e49g kernel: CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
Jan 14 18:56:47 linux-e49g kernel: nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
Jan 14 18:56:47 linux-e49g kernel: sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Jan 14 18:56:47 linux-e49g kernel: sky2 eth0: enabling interface
Jan 14 18:56:48 linux-e49g kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 14 18:56:48 linux-e49g kernel: NET: Registered protocol family 17
Jan 14 18:56:48 linux-e49g kernel: ACPI: Unable to turn cooling device [f6c4ab94] 'on'
Jan 14 18:56:48 linux-e49g kernel: sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
Jan 14 18:56:48 linux-e49g kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jan 14 18:56:49 linux-e49g ifup-dhcp: . 
Jan 14 18:56:49 linux-e49g kdm_config[2827]: Multiple occurrences of key 'Language' in section [X-*-Greeter] of /usr/share/kde4/config/kdm/kdmrc
Jan 14 18:56:49 linux-e49g kdm_config[2827]: Multiple occurrences of key 'ShowUsers' in section [X-*-Greeter] of /usr/share/kde4/config/kdm/kdmrc
Jan 14 18:56:49 linux-e49g kdm_config[2827]: Multiple occurrences of key 'UseBackground' in section [X-*-Greeter] of /usr/share/kde4/config/kdm/kdmrc
Jan 14 18:56:49 linux-e49g kdm_config[2827]: Multiple occurrences of key 'UseTheme' in section [X-*-Greeter] of /usr/share/kde4/config/kdm/kdmrc
Jan 14 18:56:51 linux-e49g ifup-dhcp: . 
Jan 14 18:56:53 linux-e49g kernel: ACPI: Unable to turn cooling device [f6c4ab94] 'on'
Jan 14 18:56:53 linux-e49g ifup-dhcp: . 
Jan 14 18:56:55 linux-e49g ifup-dhcp: . 
Jan 14 18:56:57 linux-e49g ifup-dhcp: . 
Jan 14 18:56:58 linux-e49g kernel: eth0: no IPv6 routers present
Jan 14 18:56:59 linux-e49g kernel: ACPI: Unable to turn cooling device [f6c4ab94] 'on'
Jan 14 18:56:59 linux-e49g ifup-dhcp: . 
Jan 14 18:57:01 linux-e49g ifup-dhcp: . 
Jan 14 18:57:03 linux-e49g ifup-dhcp:  
Jan 14 18:57:03 linux-e49g ifup-dhcp:     eth0      DHCP4 continues in background
Jan 14 18:57:05 linux-e49g kernel: ACPI: Unable to turn cooling device [f6c4ab94] 'on'
Jan 14 18:57:06 linux-e49g dhcpcd[2788]: eth0: timed out
Jan 14 18:57:06 linux-e49g dhcpcd[2788]: eth0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-eth0.info'
Jan 14 18:57:06 linux-e49g dhcpcd[2788]: eth0: broadcasting for a lease
Jan 14 18:57:11 linux-e49g kernel: ACPI: Unable to turn cooling device [f6c4ab94] 'on'
Jan 14 18:57:12 linux-e49g kernel: CPU0 attaching NULL sched-domain.
Jan 14 18:57:12 linux-e49g kernel: CPU1 attaching NULL sched-domain.
Jan 14 18:57:12 linux-e49g kernel: CPU0 attaching sched-domain:
Jan 14 18:57:12 linux-e49g kernel:  domain 0: span 0-1 level MC
Jan 14 18:57:12 linux-e49g kernel:   groups: 0 1
Jan 14 18:57:12 linux-e49g kernel:   domain 1: span 0-1 level NODE
Jan 14 18:57:12 linux-e49g kernel:    groups: 0-1
Jan 14 18:57:12 linux-e49g kernel: CPU1 attaching sched-domain:
Jan 14 18:57:12 linux-e49g kernel:  domain 0: span 0-1 level MC
Jan 14 18:57:12 linux-e49g kernel:   groups: 1 0
Jan 14 18:57:12 linux-e49g kernel:   domain 1: span 0-1 level NODE
Jan 14 18:57:12 linux-e49g kernel:    groups: 0-1
Jan 14 18:57:15 linux-e49g ksysguardd[3827]: cannot open config file '/usr/etc/ksysguarddrc'
Jan 14 18:57:16 linux-e49g auditd[3970]: Started dispatcher: /sbin/audispd pid: 3975
Jan 14 18:57:16 linux-e49g auditd[3970]: Init complete, auditd 1.7.7 listening for events (startup state disable)
Jan 14 18:57:16 linux-e49g audispd: priority_boost_parser called with: 4
Jan 14 18:57:16 linux-e49g audispd: af_unix plugin initialized
Jan 14 18:57:16 linux-e49g audispd: audispd initialized with q_depth=80 and 1 active plugins
Jan 14 18:57:17 linux-e49g kernel: ACPI: Critical trip point
Jan 14 18:57:17 linux-e49g kernel: Critical temperature reached (60 C), shutting down.
Jan 14 18:57:17 linux-e49g kernel: ACPI: Unable to turn cooling device [f6c4ab94] 'on'
Jan 14 18:57:17 linux-e49g shutdown[4111]: shutting down for system halt
Jan 14 18:57:21 linux-e49g kernel: nepomukservices[4244]: segfault at 4 ip b7d82912 sp bfd9d290 error 4 in libQtCore.so.4.4.3[b7d37000+221000]
Jan 14 18:57:21 linux-e49g avahi-daemon[4307]: Found user 'avahi' (UID 103) and group 'avahi' (GID 104).
Jan 14 18:57:21 linux-e49g avahi-daemon[4307]: Successfully dropped root privileges.
Jan 14 18:57:21 linux-e49g avahi-daemon[4307]: avahi-daemon 0.6.23 starting up.
Jan 14 18:57:21 linux-e49g avahi-daemon[4307]: Loading service file /etc/avahi/services/sftp-ssh.service.
Jan 14 18:57:21 linux-e49g avahi-daemon[4307]: Loading service file /etc/avahi/services/ssh.service.
Jan 14 18:57:21 linux-e49g avahi-daemon[4307]: Network interface enumeration completed.
Jan 14 18:57:21 linux-e49g avahi-daemon[4307]: Registering new address record for fe80::215:58ff:fe6d:2853 on eth0.*.
Jan 14 18:57:21 linux-e49g avahi-daemon[4307]: Server startup complete. Host name is linux-e49g.local. Local service cookie is 472487660.
Jan 14 18:57:21 linux-e49g avahi-daemon[4307]: Service "linux-e49g" (/etc/avahi/services/ssh.service) successfully established.
Jan 14 18:57:21 linux-e49g avahi-daemon[4307]: Service "SFTP File Transfer on linux-e49g" (/etc/avahi/services/sftp-ssh.service) successfully established.
Jan 14 18:57:21 linux-e49g avahi-daemon[4307]: Registering HINFO record with values 'I686'/'LINUX'.
Jan 14 18:57:23 linux-e49g kernel: Critical temperature reached (59 C), shutting down.
Jan 14 18:57:23 linux-e49g kernel: ACPI: Unable to turn cooling device [f6c4ab94] 'on'
Jan 14 18:57:23 linux-e49g shutdown[4584]: shutting down for system halt
Jan 14 18:57:23 linux-e49g ifup:     dsl0      name: DSL Connection
Jan 14 18:57:23 linux-e49g ifup:     dsl0      Startmode is 'manual'
Jan 14 18:57:25 linux-e49g pulseaudio[4696]: pid.c: Stale PID file, overwriting.
Jan 14 18:57:26 linux-e49g init: Switching to runlevel: 0
Jan 14 18:57:26 linux-e49g dhcpcd[2788]: eth0: timed out
Jan 14 18:57:26 linux-e49g dhcpcd[2788]: eth0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-eth0.info'
...... <next post>

Motokultivator · January 14, 2009, 7:54pm


...... <above post>
Jan 14 18:57:26 linux-e49g dhcpcd[2788]: eth0: broadcasting for a lease
Jan 14 18:57:27 linux-e49g pulseaudio[4696]: alsa-util.c: Device hw:1 doesn't support 44100 Hz, changed to 22050 Hz.
Jan 14 18:57:27 linux-e49g pulseaudio[4696]: alsa-util.c: Device hw:1 doesn't support 2 channels, changed to 1.
Jan 14 18:57:28 linux-e49g pulseaudio[4741]: main.c: High-priority scheduling enabled in configuration but not allowed by policy.
Jan 14 18:57:28 linux-e49g pulseaudio[4741]: core-util.c: setpriority(): Permission denied
Jan 14 18:57:28 linux-e49g pulseaudio[4741]: ltdl-bind-now.c: Failed to find original dlopen loader.
Jan 14 18:57:28 linux-e49g pulseaudio[4748]: pid.c: Daemon already running.
Jan 14 18:57:29 linux-e49g kernel: ACPI: Unable to turn cooling device [f6c4ab94] 'on'
Jan 14 18:57:29 linux-e49g pulseaudio[4696]: module-alsa-source.c: Increasing wakeup watermark to 40,00 ms
Jan 14 18:57:29 linux-e49g kernel: bootsplash: status on console 0 changed to on
Jan 14 18:57:32 linux-e49g kernel: usbcore: deregistering interface driver snd-usb-audio
Jan 14 18:57:32 linux-e49g kernel: HDA Intel 0000:00:1b.0: PCI INT A disabled
Jan 14 18:57:32 linux-e49g auditd[3970]: Error sending signal_info request (Operation not supported)
Jan 14 18:57:32 linux-e49g auditd[3970]: The audit daemon is exiting.
Jan 14 18:57:32 linux-e49g avahi-daemon[4307]: Got SIGTERM, quitting.
Jan 14 18:57:33 linux-e49g rpcbind: rpcbind terminating on signal. Restart with "rpcbind -w"
Jan 14 18:57:33 linux-e49g kernel: Kernel logging (proc) stopped.
Jan 14 18:57:33 linux-e49g kernel: Kernel log daemon terminating.
Jan 14 18:57:33 linux-e49g syslog-ng[2039]: Termination requested via signal, terminating;
Jan 14 18:57:33 linux-e49g syslog-ng[2039]: syslog-ng shutting down; version='2.0.9'
Jan 14 19:07:02 linux-e49g syslog-ng[1846]: syslog-ng starting up; version='2.0.9'
Jan 14 19:07:03 linux-e49g rchal: CPU frequency scaling is not supported by your processor.
Jan 14 19:07:03 linux-e49g rchal: boot with 'CPUFREQ=no' in to avoid this warning.
Jan 14 19:07:03 linux-e49g rchal: Cannot load cpufreq governors - No cpufreq driver available
Jan 14 19:07:04 linux-e49g SuSEfirewall2: batch committing...
Jan 14 19:07:05 linux-e49g SuSEfirewall2: Firewall rules set to CLOSE.
Jan 14 19:07:05 linux-e49g ifup:     lo        
Jan 14 19:07:05 linux-e49g ifup:     lo        
Jan 14 19:07:05 linux-e49g ifup: IP address: 127.0.0.1/8  
Jan 14 19:07:05 linux-e49g ifup:  
Jan 14 19:07:05 linux-e49g ifup:               
Jan 14 19:07:05 linux-e49g ifup: IP address: 127.0.0.2/8  
Jan 14 19:07:05 linux-e49g ifup:  
Jan 14 19:07:06 linux-e49g ifup:     eth0      device: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
Jan 14 19:07:06 linux-e49g ifup-dhcp:     eth0      Starting DHCP4 client
Jan 14 19:07:06 linux-e49g dhcpcd[2587]: eth0: dhcpcd 3.2.3 starting
Jan 14 19:07:06 linux-e49g dhcpcd[2587]: eth0: hardware address = 00:15:58:6d:28:53
Jan 14 19:07:06 linux-e49g dhcpcd[2587]: eth0: broadcasting for a lease
Jan 14 19:07:07 linux-e49g kernel: klogd 1.4.1, log source = /proc/kmsg started.
Jan 14 19:07:07 linux-e49g kernel: type=1505 audit(1231956420.796:2): operation="profile_load" name="/bin/ping" name2="default" pid=1738
Jan 14 19:07:07 linux-e49g kernel: type=1505 audit(1231956420.856:3): operation="profile_load" name="/sbin/klogd" name2="default" pid=1765
Jan 14 19:07:07 linux-e49g kernel: type=1505 audit(1231956420.984:4): operation="profile_load" name="/sbin/syslog-ng" name2="default" pid=1776
Jan 14 19:07:07 linux-e49g kernel: type=1505 audit(1231956421.072:5): operation="profile_load" name="/sbin/syslogd" name2="default" pid=1788
Jan 14 19:07:07 linux-e49g kernel: type=1505 audit(1231956421.160:6): operation="profile_load" name="/usr/sbin/avahi-daemon" name2="default" pid=1789
Jan 14 19:07:07 linux-e49g kernel: type=1505 audit(1231956421.240:7): operation="profile_load" name="/usr/sbin/identd" name2="default" pid=1790
Jan 14 19:07:07 linux-e49g kernel: type=1505 audit(1231956421.320:8): operation="profile_load" name="/usr/sbin/mdnsd" name2="default" pid=1791
Jan 14 19:07:07 linux-e49g kernel: type=1505 audit(1231956421.412:9): operation="profile_load" name="/usr/sbin/nscd" name2="default" pid=1792
Jan 14 19:07:07 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:07:07 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:07:07 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:07:07 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:07:07 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:07:07 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:07:07 linux-e49g kernel: type=1505 audit(1231956421.532:10): operation="profile_load" name="/usr/sbin/ntpd" name2="default" pid=1793
Jan 14 19:07:07 linux-e49g kernel: type=1505 audit(1231956421.612:11): operation="profile_load" name="/usr/sbin/traceroute" name2="default" pid=1794
Jan 14 19:07:07 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:07:07 linux-e49g kernel: ata3: EH complete
Jan 14 19:07:07 linux-e49g kernel: powernow_k8: Unknown symbol acpi_processor_notify_smm
Jan 14 19:07:07 linux-e49g kernel: powernow_k8: Unknown symbol acpi_processor_unregister_performance
Jan 14 19:07:07 linux-e49g ifup-dhcp: . 
Jan 14 19:07:07 linux-e49g kernel: powernow_k8: Unknown symbol acpi_processor_register_performance
Jan 14 19:07:07 linux-e49g kernel: NET: Registered protocol family 10
Jan 14 19:07:07 linux-e49g kernel: lo: Disabled Privacy Extensions
Jan 14 19:07:07 linux-e49g kernel: powernow_k7: Unknown symbol acpi_processor_notify_smm
Jan 14 19:07:07 linux-e49g kernel: powernow_k7: Unknown symbol acpi_processor_unregister_performance
Jan 14 19:07:07 linux-e49g kernel: powernow_k7: Unknown symbol acpi_processor_register_performance
Jan 14 19:07:07 linux-e49g kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Jan 14 19:07:07 linux-e49g kernel: acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
Jan 14 19:07:07 linux-e49g kernel: acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance
Jan 14 19:07:09 linux-e49g kdm_config[2620]: Multiple occurrences of key 'Language' in section [X-*-Greeter] of /usr/share/kde4/config/kdm/kdmrc
Jan 14 19:07:09 linux-e49g kdm_config[2620]: Multiple occurrences of key 'ShowUsers' in section [X-*-Greeter] of /usr/share/kde4/config/kdm/kdmrc
Jan 14 19:07:07 linux-e49g kernel: acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance
Jan 14 19:07:09 linux-e49g kernel: acpi_cpufreq: Unknown symbol acpi_processor_register_performance
Jan 14 19:07:09 linux-e49g kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 14 19:07:09 linux-e49g kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Jan 14 19:07:09 linux-e49g kernel: CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
Jan 14 19:07:09 linux-e49g kernel: nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
Jan 14 19:07:09 linux-e49g kernel: sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
Jan 14 19:07:09 linux-e49g kernel: sky2 eth0: enabling interface
Jan 14 19:07:09 linux-e49g kdm_config[2620]: Multiple occurrences of key 'UseBackground' in section [X-*-Greeter] of /usr/share/kde4/config/kdm/kdmrc
Jan 14 19:07:09 linux-e49g kdm_config[2620]: Multiple occurrences of key 'UseTheme' in section [X-*-Greeter] of /usr/share/kde4/config/kdm/kdmrc
Jan 14 19:07:09 linux-e49g kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 14 19:07:09 linux-e49g kernel: NET: Registered protocol family 17
Jan 14 19:07:09 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:07:09 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:07:09 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:07:09 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:07:09 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:07:09 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:07:09 linux-e49g ifup-dhcp: . 
Jan 14 19:07:09 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:07:10 linux-e49g kernel: ata3: EH complete
Jan 14 19:07:10 linux-e49g kernel: sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
Jan 14 19:07:10 linux-e49g kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Jan 14 19:07:12 linux-e49g ifup-dhcp: . 
Jan 14 19:07:13 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:07:13 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:07:13 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:07:13 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:07:13 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:07:13 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:07:13 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:07:13 linux-e49g kernel: ata3: EH complete
Jan 14 19:07:14 linux-e49g ifup-dhcp: . 
Jan 14 19:07:16 linux-e49g ifup-dhcp: . 
Jan 14 19:07:18 linux-e49g ifup-dhcp: . 
Jan 14 19:07:18 linux-e49g kernel: eth0: no IPv6 routers present
Jan 14 19:07:20 linux-e49g ifup-dhcp: . 
Jan 14 19:07:20 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:07:20 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:07:20 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00

...... <next post>

In message log exists boot messages with option acpi=off, but with this option mouse coursor is very very slow :S

Motokultivator · January 14, 2009, 7:55pm


...... <above post>
Jan 14 19:07:20 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:07:20 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:07:20 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:07:20 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:07:20 linux-e49g kernel: ata3: EH complete
Jan 14 19:07:22 linux-e49g ifup-dhcp: . 
Jan 14 19:07:24 linux-e49g ifup-dhcp:  
Jan 14 19:07:24 linux-e49g ifup-dhcp:     eth0      DHCP4 continues in background
Jan 14 19:07:26 linux-e49g kernel: CPU0 attaching NULL sched-domain.
Jan 14 19:07:26 linux-e49g kernel: CPU1 attaching NULL sched-domain.
Jan 14 19:07:26 linux-e49g kernel: CPU0 attaching sched-domain:
Jan 14 19:07:26 linux-e49g kernel:  domain 0: span 0-1 level MC
Jan 14 19:07:26 linux-e49g kernel:   groups: 0 1
Jan 14 19:07:26 linux-e49g kernel:   domain 1: span 0-1 level NODE
Jan 14 19:07:26 linux-e49g kernel:    groups: 0-1
Jan 14 19:07:26 linux-e49g kernel: CPU1 attaching sched-domain:
Jan 14 19:07:26 linux-e49g kernel:  domain 0: span 0-1 level MC
Jan 14 19:07:26 linux-e49g kernel:   groups: 1 0
Jan 14 19:07:26 linux-e49g kernel:   domain 1: span 0-1 level NODE
Jan 14 19:07:26 linux-e49g kernel:    groups: 0-1
Jan 14 19:07:26 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:07:26 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:07:26 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:07:26 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:07:26 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:07:26 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:07:26 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:07:26 linux-e49g kernel: ata3: EH complete
Jan 14 19:07:26 linux-e49g dhcpcd[2587]: eth0: timed out
Jan 14 19:07:26 linux-e49g dhcpcd[2587]: eth0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-eth0.info'
Jan 14 19:07:26 linux-e49g dhcpcd[2587]: eth0: broadcasting for a lease
Jan 14 19:07:29 linux-e49g ksysguardd[3356]: cannot open config file '/usr/etc/ksysguarddrc'
Jan 14 19:07:32 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:07:32 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:07:32 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:07:32 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:07:32 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:07:32 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:07:32 linux-e49g kernel: nepomukservices[3483]: segfault at 4 ip b7d8f912 sp bfdaa290 error 4 in libQtCore.so.4.4.3[b7d44000+221000]
Jan 14 19:07:32 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:07:32 linux-e49g kernel: ata3: EH complete
Jan 14 19:07:34 linux-e49g kernel: ALSA sound/usb/usbmixer.c:803: cannot get current value for control 1 master ch: err = -22
Jan 14 19:07:35 linux-e49g pulseaudio[3661]: pid.c: Stale PID file, overwriting.
Jan 14 19:07:36 linux-e49g pulseaudio[3664]: main.c: High-priority scheduling enabled in configuration but not allowed by policy.
Jan 14 19:07:36 linux-e49g pulseaudio[3664]: core-util.c: setpriority(): Permission denied
Jan 14 19:07:36 linux-e49g pulseaudio[3664]: ltdl-bind-now.c: Failed to find original dlopen loader.
Jan 14 19:07:36 linux-e49g pulseaudio[3661]: module-alsa-source.c: Disabling timer-based scheduling because high-resolution timers are not available from the kernel.
Jan 14 19:07:37 linux-e49g kernel: ALSA sound/usb/usbmixer.c:803: cannot get current value for control 1 master ch: err = -22
Jan 14 19:07:37 linux-e49g pulseaudio[3661]: alsa-util.c: Device hw:1 doesn't support 44100 Hz, changed to 22050 Hz.
Jan 14 19:07:37 linux-e49g pulseaudio[3661]: alsa-util.c: Device hw:1 doesn't support 2 channels, changed to 1.
Jan 14 19:07:38 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:07:38 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:07:38 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:07:38 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:07:38 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:07:38 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:07:38 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:07:38 linux-e49g kernel: ata3: EH complete
Jan 14 19:07:40 linux-e49g pulseaudio[3661]: alsa-util.c: Unable to load mixer: Invalid argument
Jan 14 19:07:40 linux-e49g kernel: ALSA sound/usb/usbmixer.c:803: cannot get current value for control 1 master ch: err = -22
Jan 14 19:07:40 linux-e49g pulseaudio[3661]: module-alsa-sink.c: Disabling timer-based scheduling because high-resolution timers are not available from the kernel.
Jan 14 19:07:40 linux-e49g pulseaudio[3661]: module-alsa-source.c: Disabling timer-based scheduling because high-resolution timers are not available from the kernel.
Jan 14 19:07:40 linux-e49g pulseaudio[3952]: pid.c: Daemon already running.
Jan 14 19:07:41 linux-e49g python: hp-systray(init)[3603]: warning: No hp: or hpfax: devices found in any installed CUPS queue. Exiting.
Jan 14 19:07:44 linux-e49g avahi-daemon[4139]: Found user 'avahi' (UID 103) and group 'avahi' (GID 104).
Jan 14 19:07:44 linux-e49g avahi-daemon[4139]: Successfully dropped root privileges.
Jan 14 19:07:44 linux-e49g avahi-daemon[4139]: avahi-daemon 0.6.23 starting up.
Jan 14 19:07:44 linux-e49g avahi-daemon[4139]: Loading service file /etc/avahi/services/sftp-ssh.service.
Jan 14 19:07:44 linux-e49g avahi-daemon[4139]: Loading service file /etc/avahi/services/ssh.service.
Jan 14 19:07:44 linux-e49g avahi-daemon[4139]: Network interface enumeration completed.
Jan 14 19:07:44 linux-e49g avahi-daemon[4139]: Registering new address record for fe80::215:58ff:fe6d:2853 on eth0.*.
Jan 14 19:07:44 linux-e49g avahi-daemon[4139]: Server startup complete. Host name is linux-e49g.local. Local service cookie is 2449108905.
Jan 14 19:07:44 linux-e49g avahi-daemon[4139]: Service "linux-e49g" (/etc/avahi/services/ssh.service) successfully established.
Jan 14 19:07:44 linux-e49g avahi-daemon[4139]: Service "SFTP File Transfer on linux-e49g" (/etc/avahi/services/sftp-ssh.service) successfully established.
Jan 14 19:07:44 linux-e49g avahi-daemon[4139]: Registering HINFO record with values 'I686'/'LINUX'.
Jan 14 19:07:44 linux-e49g auditd[4144]: Started dispatcher: /sbin/audispd pid: 4173
Jan 14 19:07:44 linux-e49g audispd: priority_boost_parser called with: 4
Jan 14 19:07:44 linux-e49g audispd: af_unix plugin initialized
Jan 14 19:07:44 linux-e49g audispd: audispd initialized with q_depth=80 and 1 active plugins
Jan 14 19:07:44 linux-e49g auditd[4144]: Init complete, auditd 1.7.7 listening for events (startup state disable)
Jan 14 19:07:44 linux-e49g ifup:     dsl0      name: DSL Connection
Jan 14 19:07:44 linux-e49g ifup:     dsl0      Startmode is 'manual'
Jan 14 19:07:44 linux-e49g kernel: ALSA sound/usb/usbmixer.c:692: 2:1: cannot get min/max values for control 2 (id 2)
Jan 14 19:07:45 linux-e49g smartd[4550]: smartd 5.39 2008-10-24 22:33 [i686-suse-linux-gnu] (openSUSE RPM) Copyright (C) 2002-8 by Bruce Allen, http://smartmontools.sourceforge.net
Jan 14 19:07:45 linux-e49g smartd[4550]: Opened configuration file /etc/smartd.conf
Jan 14 19:07:45 linux-e49g smartd[4550]: Drive: DEVICESCAN, implied '-a' Directive on line 26 of file /etc/smartd.conf
Jan 14 19:07:45 linux-e49g smartd[4550]: Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices
Jan 14 19:07:45 linux-e49g smartd[4550]: Device: /dev/sda, type changed from 'scsi' to 'sat'
Jan 14 19:07:45 linux-e49g smartd[4550]: Device: /dev/sda [SAT], opened
Jan 14 19:07:45 linux-e49g smartd[4550]: Device: /dev/sda [SAT], found in smartd database.
Jan 14 19:07:45 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:07:45 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:07:45 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:07:45 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:07:45 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:07:45 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:07:45 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:07:45 linux-e49g kernel: ata3: EH complete
Jan 14 19:07:46 linux-e49g smartd[4550]: Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list.
Jan 14 19:07:46 linux-e49g smartd[4550]: Device: /dev/sda [SAT], state read from /var/lib/smartmontools/smartd.Maxtor_6V080E0-V22WTYPG.ata.state
Jan 14 19:07:46 linux-e49g smartd[4550]: Monitoring 1 ATA and 0 SCSI devices
Jan 14 19:07:46 linux-e49g smartd[4550]: Device: /dev/sda [SAT], 1 Currently unreadable (pending) sectors
Jan 14 19:07:46 linux-e49g smartd[4550]: Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 64 to 53
Jan 14 19:07:46 linux-e49g smartd[4550]: Device: /dev/sda [SAT], SMART Usage Attribute: 199 UDMA_CRC_Error_Count changed from 181 to 192
Jan 14 19:07:46 linux-e49g smartd[4550]: Device: /dev/sda [SAT], state written to /var/lib/smartmontools/smartd.Maxtor_6V080E0-V22WTYPG.ata.state
Jan 14 19:07:46 linux-e49g smartd[4614]: smartd has fork()ed into background mode. New PID=4614.

...... &lt;next post&gt;

Motokultivator · January 14, 2009, 7:56pm


...... <above post>
Jan 14 19:07:46 linux-e49g dhcpcd[2587]: eth0: timed out
Jan 14 19:07:46 linux-e49g dhcpcd[2587]: eth0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-eth0.info'
Jan 14 19:07:46 linux-e49g dhcpcd[2587]: eth0: broadcasting for a lease
Jan 14 19:07:46 linux-e49g /usr/sbin/cron[4627]: (CRON) STARTUP (V5.0)
Jan 14 19:07:47 linux-e49g smpppd[4638]: smpppd version 1.59_SVN31 started
Jan 14 19:07:47 linux-e49g sshd[4688]: Server listening on 0.0.0.0 port 22.
Jan 14 19:07:47 linux-e49g sshd[4688]: Server listening on :: port 22.
Jan 14 19:07:47 linux-e49g SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 ...
Jan 14 19:07:47 linux-e49g SuSEfirewall2: batch committing...
Jan 14 19:07:47 linux-e49g SuSEfirewall2: Firewall rules successfully set
Jan 14 19:07:51 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:07:51 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:07:51 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:07:51 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:07:51 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:07:51 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:07:51 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:07:51 linux-e49g kernel: ata3: EH complete
Jan 14 19:07:57 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:07:57 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:07:57 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:07:57 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:07:57 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:07:57 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:07:57 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:07:57 linux-e49g kernel: ata3: EH complete
Jan 14 19:08:03 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:08:03 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:08:03 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:08:03 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:08:03 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:08:03 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:08:03 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:08:03 linux-e49g kernel: ata3: EH complete
Jan 14 19:08:06 linux-e49g dhcpcd[2587]: eth0: timed out
Jan 14 19:08:06 linux-e49g dhcpcd[2587]: eth0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-eth0.info'
Jan 14 19:08:06 linux-e49g dhcpcd[2587]: eth0: broadcasting for a lease
Jan 14 19:08:10 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:08:10 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:08:10 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:08:10 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:08:10 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:08:10 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:08:10 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:08:10 linux-e49g kernel: ata3: EH complete
Jan 14 19:08:16 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:08:16 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:08:16 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:08:16 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:08:16 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:08:16 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:08:16 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:08:16 linux-e49g kernel: ata3: EH complete
Jan 14 19:08:22 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:08:22 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:08:22 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:08:22 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:08:22 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:08:22 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:08:22 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:08:22 linux-e49g kernel: ata3: EH complete
Jan 14 19:08:26 linux-e49g dhcpcd[2587]: eth0: timed out
Jan 14 19:08:26 linux-e49g dhcpcd[2587]: eth0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-eth0.info'
Jan 14 19:08:26 linux-e49g dhcpcd[2587]: eth0: broadcasting for a lease
Jan 14 19:08:28 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:08:28 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:08:28 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:08:28 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:08:28 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:08:28 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:08:28 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:08:28 linux-e49g kernel: ata3: EH complete
Jan 14 19:08:35 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:08:35 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:08:35 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:08:35 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:08:35 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:08:35 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:08:35 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:08:35 linux-e49g kernel: ata3: EH complete
Jan 14 19:08:37 linux-e49g ksysguardd[4852]: cannot open config file '/usr/etc/ksysguarddrc'
Jan 14 19:08:41 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:08:41 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:08:41 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:08:41 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:08:41 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:08:41 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:08:41 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:08:41 linux-e49g kernel: ata3: EH complete
Jan 14 19:08:47 linux-e49g dhcpcd[2587]: eth0: timed out
Jan 14 19:08:47 linux-e49g dhcpcd[2587]: eth0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-eth0.info'
Jan 14 19:08:47 linux-e49g dhcpcd[2587]: eth0: broadcasting for a lease
Jan 14 19:08:47 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:08:47 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:08:47 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:08:47 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:08:47 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:08:47 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:08:47 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:08:47 linux-e49g kernel: ata3: EH complete
Jan 14 19:08:53 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:08:53 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:08:53 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:08:53 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:08:53 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:08:53 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:08:53 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:08:53 linux-e49g kernel: ata3: EH complete
Jan 14 19:08:59 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:08:59 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:08:59 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:08:59 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:08:59 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:08:59 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:09:00 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:09:00 linux-e49g kernel: ata3: EH complete
Jan 14 19:09:05 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:09:05 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:09:05 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:09:05 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:09:05 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:09:05 linux-e49g kernel: ata3: soft resetting link

...... <next post>

Motokultivator · January 14, 2009, 7:58pm


...... <above post>
Jan 14 19:09:05 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:09:05 linux-e49g kernel: ata3: EH complete
Jan 14 19:09:07 linux-e49g dhcpcd[2587]: eth0: timed out
Jan 14 19:09:07 linux-e49g dhcpcd[2587]: eth0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-eth0.info'
Jan 14 19:09:07 linux-e49g dhcpcd[2587]: eth0: broadcasting for a lease
Jan 14 19:09:11 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:09:11 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:09:11 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:09:11 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:09:11 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:09:11 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:09:11 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:09:11 linux-e49g kernel: ata3: EH complete
Jan 14 19:09:17 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:09:17 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:09:17 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:09:17 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:09:17 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:09:17 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:09:17 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:09:17 linux-e49g kernel: ata3: EH complete
Jan 14 19:09:24 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:09:24 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:09:24 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:09:24 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:09:24 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:09:24 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:09:24 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:09:24 linux-e49g kernel: ata3: EH complete
Jan 14 19:09:27 linux-e49g dhcpcd[2587]: eth0: timed out
Jan 14 19:09:27 linux-e49g dhcpcd[2587]: eth0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-eth0.info'
Jan 14 19:09:27 linux-e49g dhcpcd[2587]: eth0: broadcasting for a lease
Jan 14 19:09:30 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:09:30 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:09:30 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:09:30 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:09:30 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:09:30 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:09:30 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:09:30 linux-e49g kernel: ata3: EH complete
Jan 14 19:09:36 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:09:36 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:09:36 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:09:36 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:09:36 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:09:36 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:09:36 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:09:36 linux-e49g kernel: ata3: EH complete
Jan 14 19:09:40 linux-e49g su: (to root) asimh on /dev/pts/1
Jan 14 19:09:40 linux-e49g su: (to root) asimh on /dev/pts/1
Jan 14 19:09:42 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:09:42 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:09:42 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:09:42 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:09:42 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:09:42 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:09:42 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:09:42 linux-e49g kernel: ata3: EH complete
Jan 14 19:09:47 linux-e49g dhcpcd[2587]: eth0: timed out
Jan 14 19:09:47 linux-e49g dhcpcd[2587]: eth0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-eth0.info'
Jan 14 19:09:47 linux-e49g dhcpcd[2587]: eth0: broadcasting for a lease
Jan 14 19:09:49 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:09:49 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:09:49 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:09:49 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:09:49 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:09:49 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:09:49 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:09:49 linux-e49g kernel: ata3: EH complete
Jan 14 19:09:55 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:09:55 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:09:55 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:09:55 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:09:55 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:09:55 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:09:55 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:09:55 linux-e49g kernel: ata3: EH complete
Jan 14 19:10:01 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:10:01 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:10:01 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:10:01 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:10:01 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:10:01 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:10:01 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:10:01 linux-e49g kernel: ata3: EH complete
Jan 14 19:10:07 linux-e49g dhcpcd[2587]: eth0: timed out
Jan 14 19:10:07 linux-e49g dhcpcd[2587]: eth0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-eth0.info'
Jan 14 19:10:07 linux-e49g dhcpcd[2587]: eth0: broadcasting for a lease
Jan 14 19:10:07 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:10:07 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:10:07 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:10:07 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:10:07 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:10:07 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:10:07 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:10:07 linux-e49g kernel: ata3: EH complete
Jan 14 19:10:14 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:10:14 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:10:14 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:10:14 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:10:14 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:10:14 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:10:14 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:10:14 linux-e49g kernel: ata3: EH complete
Jan 14 19:10:20 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:10:20 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:10:20 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:10:20 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:10:20 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:10:20 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:10:20 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:10:20 linux-e49g kernel: ata3: EH complete
Jan 14 19:10:26 linux-e49g dhcpcd[2587]: eth0: timed out
Jan 14 19:10:26 linux-e49g dhcpcd[2587]: eth0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-eth0.info'
Jan 14 19:10:26 linux-e49g dhcpcd[2587]: eth0: broadcasting for a lease
Jan 14 19:10:26 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:10:26 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:10:26 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:10:26 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:10:26 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:10:26 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:10:26 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:10:26 linux-e49g kernel: ata3: EH complete

...... &lt;next post&gt;

Motokultivator · January 14, 2009, 7:58pm


...... <above post>
Jan 14 19:10:32 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:10:32 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:10:32 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:10:32 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:10:32 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:10:32 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:10:32 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:10:32 linux-e49g kernel: ata3: EH complete
Jan 14 19:10:39 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:10:39 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:10:39 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:10:39 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:10:39 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:10:39 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:10:39 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:10:39 linux-e49g kernel: ata3: EH complete
Jan 14 19:10:45 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:10:45 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:10:45 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:10:45 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:10:45 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:10:45 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:10:45 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:10:45 linux-e49g kernel: ata3: EH complete
Jan 14 19:10:46 linux-e49g dhcpcd[2587]: eth0: timed out
Jan 14 19:10:46 linux-e49g dhcpcd[2587]: eth0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-eth0.info'
Jan 14 19:10:46 linux-e49g dhcpcd[2587]: eth0: broadcasting for a lease
Jan 14 19:10:51 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:10:51 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:10:51 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:10:51 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:10:51 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:10:51 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:10:51 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:10:51 linux-e49g kernel: ata3: EH complete
Jan 14 19:10:57 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:10:57 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:10:57 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:10:57 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:10:57 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:10:57 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:10:57 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:10:57 linux-e49g kernel: ata3: EH complete
Jan 14 19:11:01 linux-e49g shutdown[5235]: shutting down for system reboot
Jan 14 19:11:02 linux-e49g init: Switching to runlevel: 6
Jan 14 19:11:03 linux-e49g kernel: bootsplash: status on console 0 changed to on
Jan 14 19:11:03 linux-e49g smpppd[4639]: terminating on signal 15
Jan 14 19:11:03 linux-e49g auditd[4144]: Error sending signal_info request (Operation not supported)
Jan 14 19:11:03 linux-e49g auditd[4144]: The audit daemon is exiting.
Jan 14 19:11:03 linux-e49g smartd[4614]: smartd received signal 15: Terminated
Jan 14 19:11:03 linux-e49g smartd[4614]: Device: /dev/sda [SAT], state written to /var/lib/smartmontools/smartd.Maxtor_6V080E0-V22WTYPG.ata.state
Jan 14 19:11:03 linux-e49g smartd[4614]: smartd is exiting (exit status 0)
Jan 14 19:11:03 linux-e49g avahi-daemon[4139]: Got SIGTERM, quitting.
Jan 14 19:11:03 linux-e49g sshd[4688]: Received signal 15; terminating.
Jan 14 19:11:04 linux-e49g kernel: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan 14 19:11:04 linux-e49g kernel: ata3.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
Jan 14 19:11:04 linux-e49g kernel:          cdb 12 00 00 00 24 00 00 00  00 00 00 00 00 00 00 00
Jan 14 19:11:04 linux-e49g kernel:          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan 14 19:11:04 linux-e49g kernel: ata3.00: status: { DRDY }
Jan 14 19:11:04 linux-e49g kernel: ata3: soft resetting link
Jan 14 19:11:04 linux-e49g kernel: ata3.00: configured for PIO0
Jan 14 19:11:04 linux-e49g kernel: ata3: EH complete
Jan 14 19:11:05 linux-e49g kernel: ALSA sound/usb/usbmixer.c:692: 2:1: cannot get min/max values for control 2 (id 2)
Jan 14 19:11:06 linux-e49g dhcpcd[2587]: eth0: timed out
Jan 14 19:11:06 linux-e49g dhcpcd[2587]: eth0: trying to use old lease in `/var/lib/dhcpcd/dhcpcd-eth0.info'
Jan 14 19:11:06 linux-e49g dhcpcd[2587]: eth0: broadcasting for a lease
Jan 14 19:11:08 linux-e49g kernel: ALSA sound/usb/usbmixer.c:803: cannot get current value for control 2 master ch: err = -22
Jan 14 19:11:08 linux-e49g rpcbind: rpcbind terminating on signal. Restart with "rpcbind -w"
Jan 14 19:11:08 linux-e49g kernel: Kernel logging (proc) stopped.
Jan 14 19:11:08 linux-e49g kernel: Kernel log daemon terminating.
Jan 14 19:11:08 linux-e49g syslog-ng[1846]: Termination requested via signal, terminating;
Jan 14 19:11:08 linux-e49g syslog-ng[1846]: syslog-ng shutting down; version='2.0.9'