ATI 3450 on 10.3?

I am fighting a very strange issue while trying to switch from an NVidia card to an ASUS EAH3450 on my existing system. I have a 1080 TV connected directly to the HDMI output. I tried the driver version 9.4 from ati.amd.com or adding the www.ati.com /suse/10.3 repo to yast. Same difference.

Everything seems to install but when X starts the screen goes black. The system is fully operational. The keyboard lights work. Ctrl-Alt-Backspc does nothing. At this point I also cannot switch to tty2 or any other term.

The system is still running. I can access the smb, apache and ftp servers. I can also connect with NX and NoMachine

I also tried “sax2 -r -m 0=vesa” from run level 3. The configuration is successful but the xserver crashed with font issues after the reboot. This is all very weird because the NVidia card worked just fine with 3D support.

Any help would greatly be appreciated.

Have a look at this thread:
Hardware - Installing ATI Drivers - openSUSE Forums
Try the line which specifies the fglx driver.

I did. Or what is applicable. The driver install is not automatic. The installer.sh is no longer available.

zypper in kernel-source gcc make

This reports that there is nothing to do. All there.

installer.sh

I now run the automatic installer from the amd site. I use the 9.4 driver version. The install is not reporting any error. The displayed information during the install:

  • You are running x86 w/ glibc-2.1
  • OS: SuSE linux 10.3, 32bit

I select to install:

  • Driver 8.602 on W.Org 7.1 7.2 7.3
  • The install goes through with standing on post processing kernel module for a few secs.
  • The installer now instructs me to use aticonfig.
aticonfig --initial

Reports:

  • Uninitialised file found, configuring
  • Using xorg.conf
  • Saved backup to xorg.conf.original-3
aticonfig --initial=check

This now reports that the fglrx section was found.

sax2 -r -m 0=fglrx

This is there my screen goes black and the initially described symptoms occur.

Thoughts?

here some elements of the sax log:


/*************
SaX2 log     : SaX2 version 8.1 - SVN Release: 1.49 2003/03/17
**************
SVN RELEASE  : 1443
             :
DESCRIPTION  : X11 configuration log file to collect information
             : about detection, startup and configuration.
             : There are three parts of logging:
             : ---
             : 1) INIT     ( detection, 3D )
             : 2) STARTUP  ( xorg.conf, X11 log, glxinfo )
             : 3) CONFIG   ( config actions )
             : ---
             :
VERSION      : SaX2 compiled for: [openSUSE 10.3 (i586)]
PARAMETER    : -r -m 0=fglrx -r
             :
LOG DATE     : Fri May  1 12:41:37 EDT 2009
*************/
============================
Framebuffer Info:
----------------------------
Framebuffer not active

01-May 12:41:38 <I> Initializing...
01-May 12:41:40 <I>  Sysp: Mouse detection data
	Mouse0    =>  Protocol   : explorerps/2
	Mouse0    =>  Device     : /dev/input/mice
	Mouse0    =>  Buttons    : 5
	Mouse0    =>  Wheel      : 1
	Mouse0    =>  Emulate    : 0
	Mouse0    =>  Name       : Colorado Kensington Mouse-in-a-box
	Mouse0    =>  VendorID   : 0x0461
	Mouse0    =>  DeviceID   : 0x4d03
	Mouse0    =>  Profile    : <undefined>
	Mouse0    =>  RealDevice : /dev/input/by-id/usb-0461_4d03-mouse
	Mouse0    =>  NutShell   : 0
]
01-May 12:41:40 <I>  Sysp: Keyboard detection data
	Keyboard0 =>  XkbModel   : microsoftpro
	Keyboard0 =>  XkbLayout  : us
	Keyboard0 =>  Name       : AT Translated Set 2 keyboard
	Keyboard0 =>  VendorID   : 0x0211
	Keyboard0 =>  DeviceID   : 0x0001
	Keyboard0 =>  Profile    : <undefined>
	Keyboard0 =>  RealDevice : /dev/input/event1
]
01-May 12:41:41 <I>  Sysp: Server detection data
	Card0     =>  DomainId   : 0x0
	Card0     =>  BusId      : 0x1
	Card0     =>  SlotId     : 0x00
	Card0     =>  FuncId     : 0x0
	Card0     =>  Vendor     : VESA
	Card0     =>  Device     : Framebuffer Graphics
	Card0     =>  VID        : 0x1002
	Card0     =>  DID        : 0x95c5
	Card0     =>  Module     : fglrx
	Card0     =>  BusType    : AGP
	Card0     =>  Detected   : 1
	Card0     =>  Flag       : DEFAULT
	Card0     =>  SUB-VID    : 0x1043
	Card0     =>  SUB-DID    : 0x01f4
	Card0     =>  DrvProfile : FireGL
]
01-May 12:41:45 <I>  Sysp: XStuff detection data
	Card0     =>  DDC        : VIZ0050
	Card0     =>  DDC[2]     : VIZ0050
	Card0     =>  Name       : VO22LFHDTV10A
	Card0     =>  Vendor     : VIZ
	Card0     =>  Name[2]    : VO22LFHDTV10A
	Card0     =>  Vendor[2]  : VIZ
	Card0     =>  Primary    : 01-00-0
	Card0     =>  Chipset    : <undefined>
	Card0     =>  Vsync      : 77
	Card0     =>  Hsync      : 70
	Card0     =>  Vsync[2]   : 77
	Card0     =>  Hsync[2]   : 70
	Card0     =>  Vesa       : 800 600 33 56
	Card0     =>  Vesa       : 800 600 36 60
	Card0     =>  Vesa       : 800 600 43 72
	Card0     =>  Vesa       : 800 600 45 75
	Card0     =>  Vesa       : 1024 768 46 60
	Card0     =>  Vesa       : 1024 768 53 70
	Card0     =>  Vesa       : 1024 768 57 75
	Card0     =>  Vesa[2]    : 800 600 33 56
	Card0     =>  Vesa[2]    : 800 600 36 60
	Card0     =>  Vesa[2]    : 800 600 43 72
	Card0     =>  Vesa[2]    : 800 600 45 75
	Card0     =>  Vesa[2]    : 1024 768 46 60
	Card0     =>  Vesa[2]    : 1024 768 53 70
	Card0     =>  Vesa[2]    : 1024 768 57 75
	Card0     =>  Dacspeed   : 74
	Card0     =>  Dacspeed[2]: 74
	Card0     =>  Modeline   : 1280 1390 1430 1650  720  725  730  750 +/+
	Card0     =>  Modeline[2]: 1280 1390 1430 1650  720  725  730  750 +/+
	Card0     =>  Memory     : 4096
	Card0     =>  RandR      : <undefined>
	Card0     =>  Current    : 01-00-0
	Card0     =>  RawDef     : None
	Card0     =>  Option     : None
	Card0     =>  Extension  : None
	Card0     =>  Module     : fglrx
	Card0     =>  Display    : LCD/TFT
	Card0     =>  Display[2] : LCD/TFT
	Card0     =>  Size       : 480x270
	Card0     =>  Size[2]    : 480x270
	Card0     =>  VesaBios   : 3.0
	Card0     =>  FBBoot     : 800 600 8 771
	Card0     =>  FBBoot     : 800 600 16 788
	Card0     =>  FBBoot     : 800 600 24 802
]
01-May 12:41:47 <I>  Sysp: 3D detection data
	Card3D0   =>  Install    : <none>
	Card3D0   =>  Remove     : <none>
	Card3D0   =>  Packages   : <none>
	Card3D0   =>  Active     : 0
	Card3D0   =>  Answer     : no
	Card3D0   =>  ScriptReal : <none>
	Card3D0   =>  ScriptSoft : <none>
	Card3D0   =>  Flag       : <none>
...

This seems to look alright?

More from the xlog. Here some font issues. Could that be the problem?


X Window System Version 7.2.0
	Release Date: Tue Jun  3 00:09:04 UTC 2008
	X Protocol Version 11, Revision 0, Release 7.2
	Build Operating System: openSUSE SUSE LINUX
	Current Operating System: Linux oberland 2.6.22.19-0.2-default #1 SMP 2008-12-18 10:17:03 +0100 i686
	Build Date: 03 June 2008
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
	Module Loader present
	Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
	(==) Log file: "/var/log/Xorg.0.log", Time: Fri May  1 12:41:48 2009
	(++) Using config file: "/tmp/sax2-13228/xorg.conf"
	(==) ServerLayout "Layout[all]"
	(**) |-->Screen "Screen[0]" (0)
	(**) |   |-->Monitor "Monitor[0]"
	(**) |   |-->Device "Device[0]"
	(**) |-->Input Device "Keyboard[0]"
	(**) |-->Input Device "Mouse[1]"
	(WW) The directory "/usr/share/fonts/local" does not exist.
	Entry deleted from font path.
	(WW) The directory "/usr/share/fonts/PEX" does not exist.
	Entry deleted from font path.
	(WW) The directory "/usr/share/fonts/latin2/misc" does not exist.
	Entry deleted from font path.
	(WW) The directory "/usr/share/fonts/latin2/75dpi" does not exist.
	Entry deleted from font path.
	(WW) The directory "/usr/share/fonts/latin2/100dpi" does not exist.
	Entry deleted from font path.
	(WW) The directory "/usr/share/fonts/latin2/Type1" does not exist.
	Entry deleted from font path.
	(WW) The directory "/usr/share/fonts/latin7/75dpi" does not exist.
	Entry deleted from font path.
	(WW) The directory "/usr/share/fonts/baekmuk" does not exist.
	Entry deleted from font path.
	(WW) The directory "/usr/share/fonts/japanese" does not exist.
	Entry deleted from font path.
	(WW) The directory "/usr/share/fonts/kwintv" does not exist.
	Entry deleted from font path.
	(WW) The directory "/usr/share/fonts/CID" does not exist.
	Entry deleted from font path.
	(WW) The directory "/usr/share/fonts/ucs/misc" does not exist.
	Entry deleted from font path.
	(WW) The directory "/usr/share/fonts/ucs/75dpi" does not exist.
	Entry deleted from font path.
	(WW) The directory "/usr/share/fonts/ucs/100dpi" does not exist.
	Entry deleted from font path.
	(WW) The directory "/usr/share/fonts/hellas/misc" does not exist.
	Entry deleted from font path.
	(WW) The directory "/usr/share/fonts/hellas/75dpi" does not exist.
	Entry deleted from font path.
	(WW) The directory "/usr/share/fonts/hellas/100dpi" does not exist.
	Entry deleted from font path.
	(WW) The directory "/usr/share/fonts/hellas/Type1" does not exist.
	Entry deleted from font path.
	(WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
	Entry deleted from font path.
	(WW) The directory "/usr/share/fonts/xtest" does not exist.
	Entry deleted from font path.
	(**) FontPath set to:
	/usr/share/fonts/misc:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/Type1,
	/usr/share/fonts/URW,
	/usr/share/fonts/Speedo,
	/usr/share/fonts/cyrillic,
	/usr/share/fonts/truetype,
	/usr/share/fonts/uni:unscaled,
	/opt/kde3/share/fonts
	(==) RgbPath set to "/usr/share/X11/rgb"
	(**) Input device list set to "/dev/gpmdata,/dev/input/mice"
	(==) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
	(**) Option "AllowMouseOpenFail" "on"
	(**) Option "IgnoreABI" "on"
	(**) Ignoring ABI Version
	(**) Extension "DAMAGE" is disabled
	(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
	(WW) Open ACPI failed (/var/run/acpid.socket) (Connection refused)
	(II) No APM support in BIOS or kernel
	(II) Loader magic: 0x81eb560
	(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 1.2
	X.Org XInput driver : 0.7
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
	(II) Loader running on linux
	(II) LoadModule: "pcidata"
	(II) Loading /usr/lib/xorg/modules//libpcidata.so
	(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 7.2.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.2
	(++) using VT number 7
	
	(II) PCI: PCI scan (all values are in hex)
	(II) PCI: 00:00:0: chip 8086,2770 card ...

midiman127 adjusted his/her AFB on Friday 01 May 2009 17:26 to write:

> Code:
> --------------------
> sax2 -r -m 0=fglrx
> --------------------
>
> This is there my screen goes black and the initially described symptoms
> occur.
>
> Thoughts?
>
>

If you d/load the propriety driver from ATI/AMD you do not need to use sax2,
after the aticonfig just reboot and when/if you get to the desktop use
amdcccle to get a graphical catalyst driver config.


Mark

Nil illigitimi carborundum