Asus T101MT issue with hibernation (or suspention)

English Hardware
#1

Hello all,

I recently installed Opensuse 11.4 on my Asus T101MT … and almost all works perfectly. But when i get my laptop out of bed (awake it from sleep/suspention) the touchscreen no longer works. I have to reboot the machine to make it work.
Any idea what that might be ?
I dint install any costum drivers or whatever… just a out of the box install atm. I tried to install the egalax-multitouch-driver which someone in a other post said (old post of 2010 about suse 11.3) but no luck there.

Thank in advanced :slight_smile:

Gaulo

edit its 32 bit version btw*

#2

This is my /var/log/messages file from when i suspended the machine and woke it up again:

Aug 3 13:49:50 Minix avahi-daemon[1239]: Withdrawing address record for 145.43.180.7 on eth0.
Aug 3 13:49:50 Minix avahi-daemon[1239]: Leaving mDNS multicast group on interface eth0.IPv4 with address 145.43.180.7.
Aug 3 13:49:50 Minix avahi-daemon[1239]: Interface eth0.IPv4 no longer relevant for mDNS.
Aug 3 13:49:50 Minix avahi-daemon[1239]: Withdrawing address record for fe80::22cf:30ff:fe1e:d1af on eth0.
Aug 3 13:49:51 Minix kernel: 3013.650984] EXT4-fs (sda3): re-mounted. Opts: acl,user_xattr,commit=0
Aug 3 13:49:51 Minix kernel: 3013.657358] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
Aug 3 13:49:52 Minix kernel: 3013.844231] EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr,commit=0
Aug 3 13:49:53 Minix kernel: 3014.823065] PM: Syncing filesystems … done.
Aug 3 13:49:53 Minix kernel: 3015.030402] PM: Preparing system for mem sleep
Aug 3 13:50:00 Minix bluetoothd[1448]: HCI dev 0 down
Aug 3 13:50:00 Minix bluetoothd[1448]: Adapter /org/bluez/1441/hci0 has been disabled
Aug 3 13:50:00 Minix bluetoothd[1448]: HCI dev 0 unregistered
Aug 3 13:50:00 Minix bluetoothd[1448]: Stopping hci0 event socket
Aug 3 13:50:00 Minix bluetoothd[1448]: Unregister path: /org/bluez/1441/hci0
Aug 3 13:50:00 Minix kernel: 3015.032980] Freezing user space processes … (elapsed 0.01 seconds) done.
Aug 3 13:50:00 Minix kernel: 3015.046178] Freezing remaining freezable tasks … (elapsed 0.01 seconds) done.
Aug 3 13:50:00 Minix kernel: 3015.057126] PM: Entering mem sleep
Aug 3 13:50:00 Minix kernel: 3015.057193] Suspending console(s) (use no_console_suspend to debug)
Aug 3 13:50:00 Minix kernel: 3015.061474] sd 0:0:0:0: [sda] Synchronizing SCSI cache
Aug 3 13:50:00 Minix kernel: 3015.061855] sd 0:0:0:0: [sda] Stopping disk
Aug 3 13:50:00 Minix kernel: 3015.138133] ath9k 0000:02:00.0: PCI INT A disabled
Aug 3 13:50:00 Minix kernel: 3015.138434] uhci_hcd 0000:00:1d.3: PCI INT D disabled
Aug 3 13:50:00 Minix kernel: 3015.138456] uhci_hcd 0000:00:1d.2: PCI INT C disabled
Aug 3 13:50:00 Minix kernel: 3015.138471] uhci_hcd 0000:00:1d.1: PCI INT B disabled
Aug 3 13:50:00 Minix kernel: 3015.138486] uhci_hcd 0000:00:1d.0: PCI INT A disabled
Aug 3 13:50:00 Minix kernel: 3015.149131] ehci_hcd 0000:00:1d.7: PCI INT A disabled
Aug 3 13:50:00 Minix kernel: 3015.240156] HDA Intel 0000:00:1b.0: PCI INT A disabled
Aug 3 13:50:00 Minix kernel: 3015.240210] ACPI handle has no context!
Aug 3 13:50:00 Minix kernel: 3016.738492] PM: suspend of devices complete after 1681.003 msecs
Aug 3 13:50:00 Minix kernel: 3016.738703] atl1c 0000:01:00.0: PME# enabled
Aug 3 13:50:00 Minix kernel: 3016.738731] pci 0000:00:1c.3: wake-up capability enabled by ACPI
Aug 3 13:50:00 Minix kernel: 3016.760379] PM: late suspend of devices complete after 21.876 msecs
Aug 3 13:50:00 Minix kernel: 3016.760420] ACPI: Preparing to enter system sleep state S3
Aug 3 13:50:00 Minix kernel: 3016.780130] PM: Saving platform NVS memory
Aug 3 13:50:00 Minix kernel: 3016.787629] Disabling non-boot CPUs …
Aug 3 13:50:00 Minix kernel: 3016.800149] Unmapping cpu 1 from all nodes
Aug 3 13:50:00 Minix kernel: 3016.801382] CPU 1 is now offline
Aug 3 13:50:00 Minix kernel: 3016.801387] SMP alternatives: switching to UP code
Aug 3 13:50:00 Minix kernel: 3016.808470] Extended CMOS year: 2000
Aug 3 13:50:00 Minix kernel: 3016.808470] Back to C!
Aug 3 13:50:00 Minix kernel: 3016.808470] PM: Restoring platform NVS memory
Aug 3 13:50:00 Minix kernel: 3016.808470] Extended CMOS year: 2000
Aug 3 13:50:00 Minix kernel: 3016.808470] Enabling non-boot CPUs …
Aug 3 13:50:00 Minix kernel: 3016.810093] SMP alternatives: switching to SMP code
Aug 3 13:50:00 Minix kernel: 3016.816071] Booting Node 0 Processor 1 APIC 0x1
Aug 3 13:50:00 Minix kernel: 3016.807544] Initializing CPU#1
Aug 3 13:50:00 Minix kernel: 3016.807544] Mapping cpu 1 to node 0
Aug 3 13:50:00 Minix kernel: 3016.899914] NMI watchdog enabled, takes one hw-pmu counter.
Aug 3 13:50:00 Minix kernel: 3016.902100] CPU1 is up
Aug 3 13:50:00 Minix kernel: 3016.902248] ACPI: Waking up from system sleep state S3
Aug 3 13:50:00 Minix kernel: 3016.944441] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
Aug 3 13:50:00 Minix kernel: 3016.944516] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
Aug 3 13:50:00 Minix kernel: 3016.944565] pci 0000:00:1c.0: restoring config space at offset 0x9 (was 0x1fff1, writing 0x80318021)
Aug 3 13:50:00 Minix kernel: 3016.944574] pci 0000:00:1c.0: restoring config space at offset 0x8 (was 0xfff0, writing 0x80108000)
Aug 3 13:50:00 Minix kernel: 3016.944584] pci 0000:00:1c.0: restoring config space at offset 0x7 (was 0xf0, writing 0x1010)
Aug 3 13:50:00 Minix kernel: 3016.944600] pci 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100104, writing 0x100107)
Aug 3 13:50:00 Minix kernel: 3016.944654] pci 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x2020)
Aug 3 13:50:00 Minix kernel: 3016.944670] pci 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100106, writing 0x100107)
Aug 3 13:50:00 Minix kernel: 3016.944720] pci 0000:00:1c.3: restoring config space at offset 0x9 (was 0x1fff1, writing 0x80518041)
Aug 3 13:50:00 Minix kernel: 3016.944785] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Aug 3 13:50:00 Minix kernel: 3016.944825] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Aug 3 13:50:00 Minix kernel: 3016.944865] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Aug 3 13:50:00 Minix kernel: 3016.944904] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Aug 3 13:50:00 Minix kernel: 3016.944952] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
Aug 3 13:50:00 Minix kernel: 3016.945195] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
Aug 3 13:50:00 Minix kernel: 3016.945530] PM: early resume of devices complete after 1.158 msecs
Aug 3 13:50:00 Minix kernel: 3016.945899] i915 0000:00:02.0: setting latency timer to 64
Aug 3 13:50:00 Minix kernel: 3016.949048] pci 0000:00:1c.0: PCI INT A → GSI 16 (level, low) → IRQ 16
Aug 3 13:50:00 Minix kernel: 3016.949058] HDA Intel 0000:00:1b.0: PCI INT A → GSI 22 (level, low) → IRQ 22
Aug 3 13:50:00 Minix kernel: 3016.949064] pci 0000:00:1c.0: setting latency timer to 64
Aug 3 13:50:00 Minix kernel: 3016.949070] HDA Intel 0000:00:1b.0: setting latency timer to 64
Aug 3 13:50:00 Minix kernel: 3016.949083] pci 0000:00:1c.1: PCI INT B → GSI 17 (level, low) → IRQ 17
Aug 3 13:50:00 Minix kernel: 3016.949095] pci 0000:00:1c.1: setting latency timer to 64
Aug 3 13:50:00 Minix kernel: 3016.949115] pci 0000:00:1c.3: PCI INT D → GSI 19 (level, low) → IRQ 19
Aug 3 13:50:00 Minix kernel: 3016.949126] pci 0000:00:1c.3: setting latency timer to 64
Aug 3 13:50:00 Minix kernel: 3016.949143] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
Aug 3 13:50:00 Minix kernel: 3016.949151] uhci_hcd 0000:00:1d.0: PCI INT A → GSI 23 (level, low) → IRQ 23
Aug 3 13:50:00 Minix kernel: 3016.949164] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Aug 3 13:50:00 Minix kernel: 3016.949199] usb usb2: root hub lost power or was reset
Aug 3 13:50:00 Minix kernel: 3016.949215] uhci_hcd 0000:00:1d.1: PCI INT B → GSI 19 (level, low) → IRQ 19
Aug 3 13:50:00 Minix kernel: 3016.949225] uhci_hcd 0000:00:1d.2: PCI INT C → GSI 18 (level, low) → IRQ 18
Aug 3 13:50:00 Minix kernel: 3016.949231] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Aug 3 13:50:00 Minix kernel: 3016.949236] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Aug 3 13:50:00 Minix kernel: 3016.949267] usb usb3: root hub lost power or was reset
Aug 3 13:50:00 Minix kernel: 3016.949272] usb usb4: root hub lost power or was reset
Aug 3 13:50:00 Minix kernel: 3016.949291] uhci_hcd 0000:00:1d.3: PCI INT D → GSI 16 (level, low) → IRQ 16
Aug 3 13:50:00 Minix kernel: 3016.949299] ehci_hcd 0000:00:1d.7: PCI INT A → GSI 23 (level, low) → IRQ 23
Aug 3 13:50:00 Minix kernel: 3016.949305] uhci_hcd 0000:00:1d.3: setting latency timer to 64
Aug 3 13:50:00 Minix kernel: 3016.949311] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Aug 3 13:50:00 Minix kernel: 3016.949335] usb usb5: root hub lost power or was reset
Aug 3 13:50:00 Minix kernel: 3016.949360] pci 0000:00:1e.0: setting latency timer to 64
Aug 3 13:50:00 Minix kernel: 3016.949374] ahci 0000:00:1f.2: setting latency timer to 64
Aug 3 13:50:00 Minix kernel: 3016.949383] ath9k 0000:02:00.0: PCI INT A → GSI 17 (level, low) → IRQ 17
Aug 3 13:50:00 Minix kernel: 3016.949462] pci 0000:00:1c.3: wake-up capability disabled by ACPI
Aug 3 13:50:00 Minix kernel: 3016.949474] atl1c 0000:01:00.0: PME# disabled
Aug 3 13:50:00 Minix kernel: 3016.957708] sd 0:0:0:0: [sda] Starting disk
Aug 3 13:50:00 Minix kernel: 3017.294154] usb 5-1: reset full speed USB device using uhci_hcd and address 2
Aug 3 13:50:00 Minix kernel: 3017.434592] btusb 5-1:1.0: no reset_resume for driver btusb?
Aug 3 13:50:00 Minix kernel: 3017.434599] btusb 5-1:1.1: no reset_resume for driver btusb?
Aug 3 13:50:00 Minix kernel: 3017.519146] usb 1-6: reset high speed USB device using ehci_hcd and address 4
Aug 3 13:50:00 Minix kernel: 3017.736083] usb 3-2: reset full speed USB device using uhci_hcd and address 2
Aug 3 13:50:00 Minix kernel: 3019.602093] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Aug 3 13:50:00 Minix kernel: 3019.604148] ata1.00: unexpected _GTF length (8)
Aug 3 13:50:00 Minix kernel: 3019.606868] ata1.00: unexpected _GTF length (8)
Aug 3 13:50:00 Minix kernel: 3019.607234] ata1.00: configured for UDMA/133
Aug 3 13:50:00 Minix kernel: 3019.663091] PM: resume of devices complete after 2717.489 msecs
Aug 3 13:50:00 Minix kernel: 3019.664125] PM: Finishing wakeup.
Aug 3 13:50:00 Minix kernel: 3019.664130] Restarting tasks …
Aug 3 13:50:00 Minix kernel: 3019.664320] usb 1-1: USB disconnect, address 2
Aug 3 13:50:00 Minix kernel: 3019.683797] hub 1-0:1.0: over-current change on port 2
Aug 3 13:50:00 Minix bluetoothd[1448]: HCI dev 0 registered
Aug 3 13:50:00 Minix bluetoothd[1448]: Listening for HCI events on hci0
Aug 3 13:50:00 Minix bluetoothd[1448]: HCI dev 0 up
Aug 3 13:50:00 Minix kernel: 3019.720268] done.
Aug 3 13:50:00 Minix kernel: 3019.720290] video LNXVIDEO:00: Restoring backlight state
Aug 3 13:50:00 Minix bluetoothd[1448]: Parsing /etc/bluetooth/serial.conf failed: No such file or directory
Aug 3 13:50:00 Minix bluetoothd[1448]: Adapter /org/bluez/1441/hci0 has been enabled
Aug 3 13:50:00 Minix ntfs-3g[2034]: Unmounting /dev/sdb1 (Bacix)
Aug 3 13:50:00 Minix kernel: 3019.784703] hub 1-0:1.0: over-current change on port 3
Aug 3 13:50:00 Minix acpid: 1 client rule loaded
Aug 3 13:50:01 Minix dbus-daemon: [system] Rejected send message, 3 matched rules; type=“error”, sender=":1.48" (uid=1000 pid=1962 comm="/usr/bin/gnome-shell) interface="(unset)" member="(unset)" error name=“org.freedesktop.DBus.Error.UnknownMethod” requested_reply=0 destination=":1.11" (uid=0 pid=1441 comm="/usr/sbin/bluetoothd))
Aug 3 13:50:02 Minix kernel: 3021.061130] usb 1-1: new high speed USB device using ehci_hcd and address 6
Aug 3 13:50:02 Minix kernel: 3021.176372] usb 1-1: New USB device found, idVendor=04e8, idProduct=6034
Aug 3 13:50:02 Minix kernel: 3021.176387] usb 1-1: New USB device strings: Mfr=1, Product=11, SerialNumber=3
Aug 3 13:50:02 Minix kernel: 3021.176397] usb 1-1: Product: Samsung G2 Portable
Aug 3 13:50:02 Minix kernel: 3021.176405] usb 1-1: Manufacturer: JMicron
Aug 3 13:50:02 Minix kernel: 3021.176413] usb 1-1: SerialNumber: 00000011E09310C0001A
Aug 3 13:50:02 Minix kernel: 3021.180351] scsi5 : usb-storage 1-1:1.0
Aug 3 13:50:02 Minix mtp-probe: checking bus 1, device 6: “/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-1”
Aug 3 13:50:02 Minix mtp-probe: bus: 1, device: 6 was not an MTP device
Aug 3 13:50:03 Minix kernel: 3022.196508] scsi 5:0:0:0: Direct-Access Samsung G2 Portable PQ: 0 ANSI: 2 CCS
Aug 3 13:50:03 Minix kernel: 3022.197210] sd 5:0:0:0: Attached scsi generic sg1 type 0
Aug 3 13:50:03 Minix kernel: 3022.200408] sd 5:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
Aug 3 13:50:03 Minix kernel: 3022.201647] sd 5:0:0:0: [sdb] Write Protect is off
Aug 3 13:50:03 Minix kernel: 3022.201661] sd 5:0:0:0: [sdb] Mode Sense: 3c 00 00 00
Aug 3 13:50:03 Minix kernel: 3022.201669] sd 5:0:0:0: [sdb] Assuming drive cache: write through
Aug 3 13:50:03 Minix kernel: 3022.206514] sd 5:0:0:0: [sdb] Assuming drive cache: write through
Aug 3 13:50:03 Minix kernel: 3022.234379] sdb: sdb1
Aug 3 13:50:03 Minix kernel: 3022.236851] sd 5:0:0:0: [sdb] Assuming drive cache: write through
Aug 3 13:50:03 Minix kernel: 3022.236875] sd 5:0:0:0: [sdb] Attached SCSI disk
Aug 3 13:50:03 Minix kernel: 3022.881403] EXT4-fs (sda3): re-mounted. Opts: acl,user_xattr,commit=0
Aug 3 13:50:03 Minix kernel: 3022.889122] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr,commit=0
Aug 3 13:50:04 Minix kernel: 3023.059995] EXT4-fs (sda4): re-mounted. Opts: acl,user_xattr,commit=0
Aug 3 13:50:04 Minix kernel: 3023.256377] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Aug 3 13:50:04 Minix kernel: 3023.267519] atl1c 0000:01:00.0: irq 43 for MSI/MSI-X
Aug 3 13:50:04 Minix kernel: 3023.267735] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
Aug 3 13:50:04 Minix dhclient: Internet Systems Consortium DHCP Client 4.2.1
Aug 3 13:50:04 Minix dhclient: Copyright 2004-2011 Internet Systems Consortium.
Aug 3 13:50:04 Minix dhclient: All rights reserved.
Aug 3 13:50:04 Minix dhclient: For info, please visit https://www.isc.org/software/dhcp/
Aug 3 13:50:04 Minix dhclient:

#3

Part 2 was to long to put in one message :stuck_out_tongue:

Aug 3 13:50:04 Minix dhclient: Listening on LPF/eth0/20:cf:30:1e:d1:af
Aug 3 13:50:04 Minix dhclient: Sending on LPF/eth0/20:cf:30:1e:d1:af
Aug 3 13:50:04 Minix dhclient: Sending on Socket/fallback
Aug 3 13:50:04 Minix ntfs-3g[5869]: Version 2010.10.2 integrated FUSE 27
Aug 3 13:50:04 Minix ntfs-3g[5869]: Mounted /dev/sdb1 (Read-Write, label “Bacix”, NTFS 3.1)
Aug 3 13:50:04 Minix ntfs-3g[5869]: Cmdline options: rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=100,dmask=0077,fmask=0177
Aug 3 13:50:04 Minix ntfs-3g[5869]: Mount options: rw,nosuid,nodev,uhelper=udisks,allow_other,nonempty,relatime,fsname=/dev/sdb1,blkdev,blksize=4096,default_permissions
Aug 3 13:50:04 Minix ntfs-3g[5869]: Global ownership and permissions enforced, configuration type 1
Aug 3 13:50:05 Minix kernel: 3024.509423] martian source 255.255.255.255 from 145.43.180.56, on dev eth0
Aug 3 13:50:05 Minix kernel: 3024.509445] ll header: ff:ff:ff:ff:ff:ff:00:1c:23:2d:4b:71:08:00
Aug 3 13:50:05 Minix kernel: 3024.511619] martian source 255.255.255.255 from 145.43.180.56, on dev eth0
Aug 3 13:50:05 Minix kernel: 3024.511648] ll header: ff:ff:ff:ff:ff:ff:00:1c:23:2d:4b:71:08:00
Aug 3 13:50:05 Minix kernel: 3024.511726] martian source 255.255.255.255 from 145.43.180.56, on dev eth0
Aug 3 13:50:05 Minix kernel: 3024.511745] ll header: ff:ff:ff:ff:ff:ff:00:1c:23:2d:4b:71:08:00
Aug 3 13:50:06 Minix kernel: 3025.163646] martian source 255.255.255.255 from 145.43.182.85, on dev eth0
Aug 3 13:50:06 Minix kernel: 3025.163676] ll header: ff:ff:ff:ff:ff:ff:00:17:f2:04:e2:52:08:00
Aug 3 13:50:06 Minix avahi-daemon[1239]: Registering new address record for fe80::22cf:30ff:fe1e:d1af on eth0.*.
Aug 3 13:50:06 Minix dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67
Aug 3 13:50:06 Minix dhclient: DHCPACK from 145.43.180.245
Aug 3 13:50:06 Minix dhclient: bound to 145.43.180.7 – renewal in 334774 seconds.
Aug 3 13:50:06 Minix avahi-daemon[1239]: Joining mDNS multicast group on interface eth0.IPv4 with address 145.43.180.7.
Aug 3 13:50:06 Minix avahi-daemon[1239]: New relevant interface eth0.IPv4 for mDNS.
Aug 3 13:50:06 Minix avahi-daemon[1239]: Registering new address record for 145.43.180.7 on eth0.IPv4.
Aug 3 13:50:08 Minix if-up.d/21-dhcpcd-hook-samba: No dhcpcd info nor dhclient leases file found for eth0.
Aug 3 13:50:08 Minix SuSEfirewall2: Setting up rules from /etc/sysconfig/SuSEfirewall2 …
Aug 3 13:50:08 Minix SuSEfirewall2: using default zone ‘ext’ for interface eth0
Aug 3 13:50:08 Minix SuSEfirewall2: using default zone ‘ext’ for interface wlan0
Aug 3 13:50:08 Minix SuSEfirewall2: Firewall rules successfully set
Aug 3 13:50:26 Minix su: The gnome keyring socket is not owned with the same credentials as the user login: /tmp/keyring-49hwFp/control
Aug 3 13:50:26 Minix su: gkr-pam: couldn’t unlock the login keyring.
Aug 3 13:50:26 Minix su: (to root) ichinix on /dev/pts/1

#4

Gaulo,

I had a similar issue and just put off finding a solution until yesterday. Running Debian unstable on the t101mt with the 3.1.0 kernel. I don’t use the egalax driver either. One post that helped me find a solution was:

[all variants] Ubuntu on Eee PC T101MT [Archive] - Ubuntu Forums](http://ubuntuforums.org/archive/index.php/t-1468376.html)

Search the page for “resume” and you will find a script that removes the hid_egalax driver right before it sleeps or hibernates the t101mt. Since I don’t use the hid_egalax driver I had to search the module to see which was loaded (lsmod command) and found hid_multitouch. Using “rmmod hid_multitouch” and “modprobe hid_multitouch” after a suspend restored the touchscreen. Long story short, I then created a file /etc/pm/config.d/10_unload_drivers with:

SUSPEND_MODULES=“hid_multitouch”

This appears to be working for me. So, see if you are using hid_multitouch, hid_egalax or some other driver and suspend it before you put the t101mt to sleep. I hope this helps!

Cheers,
Dustin