Apacer Audio Steno AU851 media player don't want to mount =(

Hello, fellows!

Today I bought this cute player:
http://www.e-katalog.com.ua/jpg/95748.jpg.
It has 2 GB of built-in flash memory and slot for MicroSD. I have OpenSuSE 11.3 with GNOME and Windows XP SP3 installed on my Samsung NC10 netbook. In Windows, when I connect player via USB, it recognize player as disk and I can drag files to listen music. I used to that when I insert USB storage device or mp3 player in my netbook running OpenSuSE, it automatically mounts device to /media/xxx. But when I connect player to computer, nothing happens. There are no new entries in /dev/ after insertion.

Sorry for my English. Sincerely, Kirusha.

It’s some strings about player from YAST -> Hardware -> HW Info

64: USB 00.0: 10600 Disk
[Created at usb.122]
Unique ID: ADDn.XoTPj4qBPi9
Parent ID: k4bc.9T1GDCLyFd9
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0
SysFS BusID: 1-1:1.0
Hardware Class: disk
Model: “ALi Audio Player”
Hotplug: USB
Vendor: usb 0x0402 “ALi Corp.”
Device: usb 0x5668 “Audio Player”
Revision: “0.02”
Serial ID: “00101000101410066911”
Speed: 480 Mbps
Module Alias: “usb:v0402p5668d0002dc00dsc00dp00ic08isc06ip50”
Driver Info #0:
Driver Status: usb_storage is active
Driver Activation Cmd: “modprobe usb_storage”
Config Status: cfg=no, avail=yes, need=no, active=unknown
Attached to: #50 (Hub)

Some another strings:
usb device: name = 1-1:1.0
path = /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0
modalias = “usb:v0402p5668d0002dc00dsc00dp00ic08isc06ip50”
bInterfaceNumber = 0
bInterfaceClass = 8
bInterfaceSubClass = 6
bInterfaceProtocol = 80
if: 1-1:1.0 @ /devices/pci0000:00/0000:00:1d.7/usb1/1-1
bDeviceClass = 0
bDeviceSubClass = 0
bDeviceProtocol = 0
idVendor = 0x0402
idProduct = 0x5668
manufacturer = “ALi Corp.”
product = “Audio Player”
serial = “00101000101410066911”
bcdDevice = 0002
speed = “480”

Yet another
P: /devices/pci0000:00/0000:00:1d.7/usb1/1-1
N: bus/usb/001/013
S: char/189:12
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb1/1-1
E: SUBSYSTEM=usb
E: DEVNAME=bus/usb/001/013
E: ID_VENDOR=ALi_Corp.
E: ID_VENDOR_ENC=ALi\x20Corp.
E: ID_VENDOR_ID=0402
E: ID_MODEL=Audio_Player
E: ID_MODEL_ENC=Audio\x20Player
E: ID_MODEL_ID=5668
E: ID_REVISION=0002
E: ID_SERIAL=ALi_Corp._Audio_Player_00101000101410066911
E: ID_SERIAL_SHORT=00101000101410066911
E: ID_BUS=usb
E: ID_USB_INTERFACES=:080650:
E: ID_GPHOTO2=1
E: GPHOTO2_DRIVER=proprietary
E: ID_MEDIA_PLAYER=1
E: MAJOR=189
E: MINOR=12
E: DEVTYPE=usb_device
E: DRIVER=usb
E: DEVICE=/proc/bus/usb/001/013
E: PRODUCT=402/5668/2
E: TYPE=0/0/0
E: BUSNUM=001
E: DEVNUM=013
E: DEVLINKS=/dev/char/189:12
E: TAGS=:udev-acl:

On /var/log/messages it writes:

Sep 21 01:26:57 lapotusik kernel: 552.640192] hub 1-0:1.0: unable to enumerate USB device on port 5
Sep 21 01:27:00 lapotusik kernel: 555.496100] usb 4-1: new full speed USB device using uhci_hcd and address 2
Sep 21 01:27:00 lapotusik kernel: 555.639181] usb 4-1: not running at top speed; connect to a high speed hub
Sep 21 01:27:00 lapotusik kernel: 555.664189] usb 4-1: New USB device found, idVendor=0402, idProduct=5668
Sep 21 01:27:00 lapotusik kernel: 555.664207] usb 4-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
Sep 21 01:27:00 lapotusik kernel: 555.664220] usb 4-1: Product: Audio Player
Sep 21 01:27:00 lapotusik kernel: 555.664229] usb 4-1: Manufacturer: ALi Corp.
Sep 21 01:27:00 lapotusik kernel: 555.664237] usb 4-1: SerialNumber: 00101000101410066911
Sep 21 01:27:00 lapotusik kernel: 555.667201] scsi10 : usb-storage 4-1:1.0