i have problem with my all in one PC the brand of the pc is cybernet IONE gx31 last week i installed v 12.1 gnome new fresh install every thing in installation ok but when the system boot up and go to the main there in no display i try every thing but nothing happened then i try to connect to external monitor it is work the main window appear and now i work with external monitor the strange thing every thing was working in the old version of suse 11.3 but in the new version not work can u help me the information of my system is
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 10)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 10)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c3] (rev 10)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01)
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01)
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 01)
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
Kernel driver in use: i801_smbus
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:4040]
Kernel driver in use: r8169
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:4040]
Kernel driver in use: r8169
Hello islam_1380,
Welcome here.
Allow me to point you to a few things.
When you post computer output, please do so between CODE tags: Posting in Code Tags - A Guide . This to make your post more readable and understandable.
Also, while English may not be your native languge and everybody will make every effort to understand you, please try to split up your text in sentences. Sentences that start with a capital and and with a dot. That will make it much better readable for eveybody inclusiing other people bot having English as heir first langauge (like me).
sorry for my bad language
Ok i will start from the beginning I have all in one computer which is
( I one GX31)
.
I have 12.1 installed but there is problems there is no displaying.
I tried every thing but still the same problem.
after that i connect the computer to external monitor then it is working correctly with the external .
I want use the main monitor which is built with the computer not the mirror one .
Before I install (v 12.1 I) I was installing (v 11.3) and was every thing OK but in the new version I have the problem which i told u before .
the hardware information is as bellow :
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 10)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 10)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c3] (rev 10)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01)
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01)
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 01)
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7404]
Kernel driver in use: i801_smbus
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:4040]
Kernel driver in use: r8169
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:4040]
Kernel driver in use: r8169
so any help
Hello islam1380,
It is mee again. And sorry, but again without a solution. Your new descriptions is much better readable then the old one, Thanks for that. But the fact that nowbody came here to your problem might also be due to the fact that the title “all in one PC” does not explain anything about the problem you have.
As I understand it, the display on your system does not function. then please say something like that in your title like: Monitor (type) does not work on system (type). It is you who should advertise your problem in a way that it atrackts the right people.
And it would also be interesting to tell if you realy see nothing at all on that monitor , it being black from the time you switch the system on and you only hearing the disk rattle, or that you see at least a BIOS splash, or maybe the GRUB menu, etc. You should provide as much information as you can. We can not see that monitor, you can.
On 11/29/2011 11:46 AM, hcvv wrote:
> But the fact that nowbody came here to your problem might also be due to
> the fact that the title “all in one PC” does not explain anything about
> the problem you have.
and, also that so few folks here might be running an “all in one pc” and
therefore know little about how they work, what systems they work with,
etc etc etc…
the other thing is you say everything worked in 11.3, so maybe you will
have better luck just going back to that…it is fully supported until
mid-Jan, and after that i guess it will be supported with security
patches via Evergreen…
or, you might consider going to 11.4 which is supported until September…
–
DD http://tinyurl.com/DD-Caveat
openSUSE®, the “German Engineered Automobiles” of operating systems!
From http://www.pcmag.com/article2/0,2817,2342274,00.asp, it appears that your PC is a touch-screen using Intel GMA3100. You stated in your original post that the PC performed correctly, yet exhibits an empty (or “black screen”) main display. Since the PC does work with an external monitor, two possibilities come to mind:
-
openSUSE 12.1 may have a potential problem with touch-screen support, as this would be embodied in the Intel driver(s). I have not used openSUSE (or any distro of Linux) on a touch-screen, thus this is speculation.
-
You may be experiencing the “all-in-one PC” version of the Intel Graphics “black screen” problem, for which the immediate workaround (lid closure/re-open) is not an option, as the Cybernet is an “all-in-one” sans lid.
However, since the external monitor works, you do have a potential solution. To test this possibility, without permanently updating GRUB, boot the PC to the GRUB screen. Using the tab key, enter/append the following to whatever is currently displayed"
ACPI_backlight=vendor
and continue the boot. If openSUSE boots correctly, you may add this in the GRUB entry/entries. You may need an additional ACPI option. Refer to http://forums.opensuse.org/english/get-technical-help-here/install-boot-login/466700-intel-graphics-black-screen-problem-update.html#post2395386 for information on the option acpi_osi=Linux.
NOTE: The above has been tested on openSUSE 11.4 and 12.1. It has NOT been tested on openSUSE 11.3.