After upgrade to 11.3 fails to print with samsung ml 1640 printer

Hi,

yesterday I upgrade my opensuse 11.2 to 11.3 with zypper dup. Today I try to print something but printer doesn’t react for page nor test page. On 11.2 it works perfectly. I have samsung ml 1640 connected directly to PC via usb. I’m not very familiar with cups so asking for some hints or help ;). Thanks.

Marek

output from cups:
Description: OpenBlackBox v mojom rume
Location: Moj rum
Driver: Samsung ML-1640 Series (grayscale, 2-sided printing)
Connection: usb://Samsung/ML-1640%20Series
Defaults: job-sheets=none, none media=iso_a4_210x297mm sides=one-sided

Have you tried YaST>Hardware>Printer? I found that though 11.3 had detected my printer correctly during installation, it had not installed it.

Hi,

thanks for suggestion. I check it and try to edit printed and checkbox enabled was not checked. After saving I try to print something spooler start but no page come out from printer.
I have observed something in /var/log/cups/error:
E [27/Jul/2010:21:37:53 +0200] Unable to execute /usr/lib/cups/filter/rastertosamsungspl: insecure file permissions (0100777)
E [27/Jul/2010:21:37:53 +0200] [Job 233] Unable to start filter “rastertosamsungspl” - Operation not permitted.
E [27/Jul/2010:21:37:53 +0200] [Job 233] Stopping job because the scheduler could not execute a filter.

also strange in var/log/messages:
Jul 27 21:34:19 linux-nandra kernel: 6476.356054] usb 4-2: new full speed USB device using ohci_hcd and address 4
Jul 27 21:34:20 linux-nandra kernel: 6476.571088] usb 4-2: New USB device found, idVendor=04e8, idProduct=3292
Jul 27 21:34:20 linux-nandra kernel: 6476.571097] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jul 27 21:34:20 linux-nandra kernel: 6476.571104] usb 4-2: Product: ML-1640 Series
Jul 27 21:34:20 linux-nandra kernel: 6476.571109] usb 4-2: Manufacturer: Samsung Electronics Co., Ltd.
Jul 27 21:34:20 linux-nandra kernel: 6476.571114] usb 4-2: SerialNumber: 144QBKCQ512468K.
Jul 27 21:34:20 linux-nandra kernel: 6476.580236] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3292
Jul 27 21:34:20 linux-nandra udev-configure-printer: add /devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.0
Jul 27 21:34:20 linux-nandra udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:04.0/usb4/4-2
Jul 27 21:34:20 linux-nandra udev-configure-printer: Device vendor/product is 04E8:3292
Jul 27 21:34:20 linux-nandra udev-configure-printer: add /devices/pci0000:00/0000:00:04.0/usb4/4-2/4-2:1.0/usb/lp0
Jul 27 21:34:20 linux-nandra udev-configure-printer: failed to claim interface
Jul 27 21:34:20 linux-nandra udev-configure-printer: invalid or missing IEEE 1284 Device ID
Jul 27 21:34:20 linux-nandra udev-configure-printer: parent devpath is /devices/pci0000:00/0000:00:04.0/usb4/4-2
Jul 27 21:34:20 linux-nandra udev-configure-printer: MFG:Samsung MDL:ML-1640 Series SERN:- serial:144QBKCQ512468K.
Jul 27 21:34:21 linux-nandra hp[28753]: io/hpmud/musb.c 2007: invalid usb_open: Permission denied
Jul 27 21:34:21 linux-nandra hp[28753]: io/hpmud/musb.c 2007: invalid usb_open: Permission denied
Jul 27 21:34:21 linux-nandra hp[28753]: io/hpmud/musb.c 2007: invalid usb_open: Permission denied
Jul 27 21:34:21 linux-nandra hp[28753]: io/hpmud/musb.c 2007: invalid usb_open: Permission denied
Jul 27 21:34:21 linux-nandra python: io/hpmud/pp.c 627: unable to read device-id ret=-1
Jul 27 21:34:21 linux-nandra udev-configure-printer: URI matches without serial number: usb://Samsung/ML-1640%20Series
Jul 27 21:34:21 linux-nandra udev-configure-printer: No serial number URI matches so using those without

Some permissions problems?

Thanks

Resolved :slight_smile: just change permissions for file /usr/lib/cups/filter/rastertosamsungspl from 777 to 555 and finally it start working. Anyway during upgrade something happened.