Linux newb, otherwise successful install but have silly sound question.
Yes, I’ve checked other threads to no avail. Still no sound…
My issue is…IN KDE 4, when I right click on the speaker Icon in the
tray I get the little Kmix window…why can’t I “uncheck” the mute when
the PCM is the “master channel”? When I open the mixer window ALL
channels show to be off mute, but the the right click menu selection
from the speaker Icon still shows “mute” checked?
Funny thing is…when I select another master channel type, the “mute
checked or unchecked” from right clicking the speaker Icon, ALWAYS
matches the opened Kmix window?
I have the exact same problem,but when i change the master channel fro
pcm to “front”,the speaker shows unmute but still no sound at
all.besides when i first boot i receive this message on the top of the
page that says the sound is not working because it was changed back to
the default or something like that which i have absolutely no idea what
it is talking about .any suggestion? thanks
For those with no sound at all, try working your way through the
openSUSE audio troubleshooting guide: ‘SDB:AudioTroubleshooting -
openSUSE’ (http://en.opensuse.org/AudioTroubleshooting)
To determine if you have sound, please copy and paste the following
speaker-test into a Gnome terminal or a kde konsole:
::speaker-test -c2 -l5 -twav::You should hear a female
voice saying ‘FRONT LEFT’, ‘FRONT RIGHT’ five times.
If that does not work, please post here (stating your desktop (kde4,
kde3, gnome) and openSUSE version) and there is a script and some rpm
commands you could run to provide us more information on your PC setup,
upon which a recommendation could be made.
oldcpu;1920997 Wrote:
> For those with no sound at all, try working your way through the
> openSUSE audio troubleshooting guide: ‘SDB:AudioTroubleshooting -
> openSUSE’ (http://en.opensuse.org/AudioTroubleshooting)
>
> To determine if you have sound, please copy and paste the following
> speaker-test into a Gnome terminal or a kde konsole:
> ::speaker-test -c2 -l5 -twav::You should hear a female
> voice saying ‘FRONT LEFT’, ‘FRONT RIGHT’ five times.
>
> If that does not work, please post here (stating your desktop (kde4,
> kde3, gnome) and openSUSE version) and there is a script and some rpm
> commands you could run to provide us more information on your PC setup,
> upon which a recommendation could be made.
Ok…upon further examination…speakers DO work but ONLY from the rear
jack. Anyhoo, headphones plugged in front jack do not work, but DO work
from back jack. The front jack however works fine for both speakers AND
headphones but only in WIN XP. Scrathcing head now…Obviously a
component of 11.1 and the front jack aren’t playing well together.
What’s next?
average_guy;1921007 Wrote:
> Ok…upon further examination…speakers DO work but ONLY from the rear
> jack. Anyhoo, headphones plugged in front jack do not work, but DO work
> from back jack. The front jack however works fine for both speakers AND
> headphones but only in WIN XP. Scrathcing head now…Obviously a
> component of 11.1 and the front jack aren’t playing well together.
> What’s next?
The next thing is to learn more about your hardware, and software, so
we can determine if there is a custom configuration we can apply, to
tune your setup such that the sound functionality works better. So can
you provide more very detailed information so a good recommendation can
be given? You can do that, with your PC connected to the internet, by
opening a gnome-terminal or a kde konsole and
typing:::/usr/sbin/alsa-info.sh::that will run a
diagnostic script and post the output to a web site on the internet. It
will give you the URL of the web site. Please post that URL here. I
need that output to understand better your PC configuration.
Also, please copy and paste the following commands one line at a time
into a gnome-terminal or a konsole and post here the output:
::rpm -qa | grep alsa
rpm -qa | grep pulse
rpm -q libasound2
uname -a
cat /etc/modprobe.d/sound::I also need that output.
… and finally, can you advise as to what hardware you have?
Motherboard or PC manufacturer/model# ?
Hopefully with that I can make a good recommendation.
oldcpu;1921036 Wrote:
> The next thing is to learn more about your hardware, and software, so we
> can determine if there is a custom configuration we can apply, to tune
> your setup such that the sound functionality works better. So can you
> provide more very detailed information so a good recommendation can be
> given? You can do that, with your PC connected to the internet, by
> opening a gnome-terminal or a kde konsole and
> typing:::/usr/sbin/alsa-info.sh::that will run a
> diagnostic script and post the output to a web site on the internet. It
> will give you the URL of the web site. Please post that URL here. I
> need that output to understand better your PC configuration.
>
> Also, please copy and paste the following commands one line at a time
> into a gnome-terminal or a konsole and post here the output:
> ::rpm -qa | grep alsa
> rpm -qa | grep pulse
> rpm -q libasound2
> uname -a
> cat /etc/modprobe.d/sound::I also need that output.
>
> … and finally, can you advise as to what hardware you have?
> Motherboard or PC manufacturer/model# ?
>
> Hopefully with that I can make a good recommendation.
>
> Thanks.
THE GREP ALSA INFOR IS AS FOLLOWS:
alsa-utils-1.0.18-6.4
alsa-plugins-pulse-1.0.18-6.12
alsa-firmware-1.0.17-1.42
alsa-oss-1.0.17-1.37
alsa-1.0.18-8.7
alsa-plugins-1.0.18-6.12
THE GREP PULSE IS AS FOLLOWS:
pulseaudio-module-zeroconf-0.9.12-9.6
libpulsecore4-0.9.12-9.6
pulseaudio-utils-0.9.12-9.6
pulseaudio-module-jack-0.9.12-9.6
libpulse0-0.9.12-9.6
libpulse-mainloop-glib0-0.9.12-9.6
alsa-plugins-pulse-1.0.18-6.12
pulseaudio-module-lirc-0.9.12-9.6
pulseaudio-0.9.12-9.6
pulseaudio-module-bluetooth-0.9.12-9.6
libpulse-browse0-0.9.12-9.6
pulseaudio-esound-compat-0.9.12-9.6
libxine1-pulse-1.1.15-20.8
pulseaudio-module-x11-0.9.12-9.6
THE LIBASOUND2 IS…
libasound2-1.0.18-8.7
THE UNAME IS…
Linux linux-cpi0 2.6.27.7-9-default #1 SMP 2008-12-04 18:10:04 +0100
i686 i686 i386 GNU/Linux
AND LASTLY, THE CAT /ETC/MODPROBE.D/SOUND
options snd slots=snd-hda-intel
u1Nb.RulhFAaxbD2:82801G (ICH7 Family) High Definition Audio
Controller
alias snd-card-0 snd-hda-intel
As for hardware…It’s a mutt. P4 3.4, 1G mem. On board sound…no
idea about MOBO/chipset/etc. I suppose I could open it up if the stuff
inside is labeled? It doesn’t look like rocket science. Just a few
screws it looks like.
average_guy;1921047 Wrote:
> HERE’S THE URL FOR THE ALSA URL INFO…
> http://tinyurl.com/973ed2 I searched the alsa web site for the stac9220 (and 9223) that the script
file reports your PC has, and I saw no mention of updates to the
stac9220 in a more recent alsa version (as there is an update
available).
So you could try keeping your current alsa version, and modifying your
/etc/modprobe.d/sound file to see if you can find an optimal
configuration to improve the functionality associated with your front
headphone jack.
For 1.0.18a of alsa, the ALSA-Configuration.txt file has this list of
model options for the STAC9220:
Code:
STAC9220/9221
ref Reference board
3stack D945 3stack
5stack D945 5stack + SPDIF
intel-mac-v1 Intel Mac Type 1
intel-mac-v2 Intel Mac Type 2
intel-mac-v3 Intel Mac Type 3
intel-mac-v4 Intel Mac Type 4
intel-mac-v5 Intel Mac Type 5
intel-mac-auto Intel Mac (detect type according to subsystem id)
macmini Intel Mac Mini (equivalent with type 3)
macbook Intel Mac Book (eq. type 5)
macbook-pro-v1 Intel Mac Book Pro 1st generation (eq. type 3)
macbook-pro Intel Mac Book Pro 2nd generation (eq. type 3)
imac-intel Intel iMac (eq. type 2)
imac-intel-20 Intel iMac (newer version) (eq. type 3)
dell-d81 Dell (unknown)
dell-d82 Dell (unknown)
dell-m81 Dell (unknown)
dell-m82 Dell XPS M1210
So you could try each of these model options one at a time, to see if
you can find one that works, to make your front headpone functionality
improve.
For example, to try the option “3stack” add a sentence to your
/etc/modprobe.d/sound file such that the file now looks like:
Code:
u1Nb.RulhFAaxbD2:82801G (ICH7 Family) High Definition Audio Controller
alias snd-card-0 snd-hda-intel
then restart your alsa sound driver by typing in a kde konsole ::su -c
‘rcalsasound restart’::enter root password when prompted, and restart
your mixer and then test your sound functionality.
If “3stack” does not work, then replace “3stack” in your
/etc/modprobe.d/sound file with “5stack” and restart your alsa sound
driver, mixer, and test the sound functionality.
You can try each model option in the list to see which one provides
improved behaviour (if any).
I don’t know if this is related (i’m having other issues with xulrunner)
but i also have no sound. Heres my output
I’m runnnig gnome, kernel 2.6.25 opensuse 11.0 64
ALSA lib pcm.c:2162:(snd_pcm_open_conf) Cannot open shared library
/usr/lib/alsa-lib/libasound_module_pcm_pulse.so
Playback open error: -2,No such file or directory
bash: /usr/sbin/alsa-info.sh: No such file or directory
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
It might be worth mentioning:
The sound issue started happening at the time i installed Songbird
(sound was ok at first). At the same time (the nex day) the packagekitd
has been trying to get xulrunner 181 update (the update icon shows it’s
updateing, but nothing’s happening)
after i did : su -c ‘rcalsasound restart’ it works…then what is
happening? each time it starts an update it has no sound,after i restart
it it works fine…???
spiro2903;1925096 Wrote:
> after i did : su -c ‘rcalsasound restart’ it works…then what is
> happening? each time it starts an update it has no sound,after i restart
> it it works fine…???
spiro2903, I do not like supporting multiple users on the same thread.
The reason being it gets very confusing for me, as in previous threads
where many users jumped in looking for help, I have had to search back
and forth and back and forth and back and forth and back and forth, to
try and see what is the hardware/configuration for each user. Its far
too difficult, and its TOTALLY UNNECESSARY when a new thread is much
easier.
I eventually got too frustrated, and I now refuse to do it. This
thread was started by user average_guy, and I will only help him in this
thread. I will only help others with a new thread.
Looks like the guys at Fedora figured this one out already, I thought it
looked familiar. Alsa 1.0.18 seems to have breakage with snd_hda_intel.
If you roll back to a kernel with an older ALSA release, you should be
fine.
potatomash;1939210 Wrote:
> Looks like the guys at Fedora figured this one out already, I thought it
> looked familiar. Alsa 1.0.18 seems to have breakage with snd_hda_intel.
> If you roll back to a kernel with an older ALSA release, you should be
> fine.
>
> https://bugzilla.redhat.com/show_bug.cgi?id=477954
One must be careful with generalizations like this. I have a laptop
that is using the 1.0.18 version of alsa, and it uses snd_hda_intel and
it has no similar problem.
Often alsa sound problems, when they occur, tend to be codec specific,
and generalizations/fixes from another distro may work, but can lead to
the wrong solution for other users and cause even more problems. This
is especially true for different codecs and different kernel builds by
different packagers.