Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: NVIDIA drivers completely broken after last update

  1. #11
    Join Date
    Feb 2019
    Location
    Russia still D‑':
    Posts
    2,152

    Default Re: NVIDIA drivers completely broken after last update

    Quote Originally Posted by Bojan View Post
    Similar problem with me and the following system:
    Operating System: openSUSE Leap 15.4
    KDE Plasma Version: 5.25.90
    KDE Frameworks Version: 5.98.0
    Qt Version: 5.15.5
    Kernel Version: 5.14.21-150400.24.18-default (64-bit)
    Graphics Platform: X11
    Processors: 12 × Intel® Core™ i7-10850H CPU @ 2.70GHz
    Memory: 31,2 GiB of RAM
    Graphics Processor: Quadro RTX 3000/PCIe/SSE2
    Manufacturer: HP
    Product Name: HP ZBook Fury 17 G7 Mobile Workstation

    Upgrading the kernel form 5.14.21-150400.24.18-default (64-bit) to 5.14.21-150400.24.21-default (64-bit). After reboot the system did not run any more and ended with a screen of "kernel panic". I had to use previous kernel at the boot screen. The command inxi -SGaz --vs produced the following output
    Code:
    nxi 3.3.21-00 (2022-08-22)
    System:
      Kernel: 5.14.21-150400.24.18-default arch: x86_64 bits: 64 compiler: gcc
        v: 7.5.0 parameters: BOOT_IMAGE=/vmlinuz-5.14.21-150400.24.18-default
        root=UUID=85cb5677-e732-4bcf-b769-b98aee0a5c3c splash=silent
        mitigations=auto quiet
      Desktop: KDE Plasma v: 5.25.5 tk: Qt v: 5.15.5 wm: kwin_x11 vt: 7
        dm: SDDM Distro: openSUSE Leap 15.4
    Graphics:
      Device-1: NVIDIA TU106GLM [Quadro RTX 3000 Mobile / Max-Q]
        vendor: Hewlett-Packard driver: nvidia v: 470.141.03
        alternate: nouveau,nvidia_drm non-free: 515.xx+ status: current (as of
        2022-08) arch: Turing code: TUxxx process: TSMC 12nm built: 2018-22 pcie:
        gen: 1 speed: 2.5 GT/s lanes: 16 link-max: gen: 3 speed: 8 GT/s ports:
        active: none off: eDP-1 empty: DP-1,DP-2,DP-3 bus-ID: 01:00.0
        chip-ID: 10de:1f36 class-ID: 0300
      Device-2: Quanta HP HD Camera type: USB driver: uvcvideo bus-ID: 1-7:3
        chip-ID: 0408:5347 class-ID: 0e02 serial: <filter>
      Display: x11 server: X.Org v: 1.20.3 with: Xwayland v: 21.1.4
        compositor: kwin_x11 driver: X: loaded: modesetting,nvidia
        unloaded: fbdev,nouveau,vesa alternate: nv gpu: nvidia,nvidia-nvswitch
        display-ID: :0 screens: 1
      Screen-1: 0 s-res: 1920x1080 s-dpi: 128 s-size: 381x211mm (15.00x8.31")
        s-diag: 436mm (17.15")
      Monitor-1: DP-6 pos: primary res: 1920x1080 hz: 60 dpi: 128
        size: 382x215mm (15.04x8.46") diag: 438mm (17.26") modes: N/A
      Monitor-2: eDP-1-1 size-res: N/A modes: N/A
      OpenGL: renderer: Quadro RTX 3000/PCIe/SSE2 v: 4.6.0 NVIDIA 470.141.03
        direct render: Yes
    I uninstalled Nvidia driver hoping this will solve the problem. How wrong was I. The reboot with .24-21 kernel ended again with kernel panic. I also tried with the latest Nvidia driver 515.65 with the same result. I have to boot with .24-18 kernel meaning that there is an issue with the latest kernel and not with Nvidia driver.

    Am I right.
    Create bug report. Nvidia drivers from repo had some troubles previously.
    Where is Intel graphics?

  2. #12

    Default Re: NVIDIA drivers completely broken after last update

    Given that a NVIDIA Corporation G98 [Quadro NVS 450] is apparently too old to have much chance of getting a driver running on a 5.14+ kernel, can anyone recommend a more current card? Nothing fancy, just four additional monitors for normal desktop work?

    TIA!!

  3. #13
    Join Date
    Jun 2008
    Location
    East of Podunk
    Posts
    33,699
    Blog Entries
    15

    Default Re: NVIDIA drivers completely broken after last update

    Quote Originally Posted by omnitec View Post
    Given that a NVIDIA Corporation G98 [Quadro NVS 450] is apparently too old to have much chance of getting a driver running on a 5.14+ kernel, can anyone recommend a more current card? Nothing fancy, just four additional monitors for normal desktop work?

    TIA!!
    Hi
    Depends, I have a Quadro RTX T400 (~US$160), it drives three 1080P screens but can run 5 (with DP splitters) at 4K. I had a Yeston AMD RX550 Lexa chipset (~US$190) with 4 HDMI ports which may be more up your alley? I'm looking at adding a T1000 if/when prices come down....
    Cheers Malcolm °¿° (Linux Counter #276890)
    SUSE SLE, openSUSE Leap/Tumbleweed (x86_64) | GNOME DE
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!

Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •