Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: NVIDIA drivers completely broken after last update

  1. #1

    Default NVIDIA drivers completely broken after last update

    Hello folks. I did an update yesterday and now my graphics driver doesn't seem to like doing anything using opengl. It still functions in that I have a working desktop but I can't play any 3D games such as ET:Legacy. Did anyone else have this issue with the latest update? How would I roll an update back to the previous package?

    Thanks!

  2. #2

    Default Re: NVIDIA drivers completely broken after last update

    Please provide some usefull information:
    - dmesg output
    - journalctl output
    - terminal output when startet from console
    - which driver version?
    - inxi -Ga
    ...

    Rollback: https://doc.opensuse.org/documentati...a-snapper.html

  3. #3

    Default Re: NVIDIA drivers completely broken after last update

    Same problem here with my Intel NUC5.
    Code:
    Graphics:  Device-1: Intel HD Graphics 6000 driver: i915 v: kernel bus-ID: 00:02.0 
               Display: x11 server: X.Org 1.20.3 driver:loaded: intel unloaded: fbdev,modesetting,vesa resolution: 2560x1440~60Hz 
               OpenGL:renderer: llvmpipe (LLVM 11.0.1 256 bits) v: 4.5 Mesa 21.2.4 direct render: Yes
    

  4. #4

    Default Re: NVIDIA drivers completely broken after last update

    Having the same problem:

    5.14.21-150400.24.18-default
    openSUSE Leap 15.4

    After updating last week, this secondary vider card failed to run:

    NVIDIA G98 [Quadro NVS 450]

    Initially it displayed a black background and would allow a mouse pointer, but after logging in (Gnome Classic, not Wayland) it was not a valid display.

    Blacklisted noveau and located the compatible driver from Nvidia:

    NVIDIA-Linux-x86_64-340.108.run

    BUT compile fails:

    /tmp/selfgz11750/NVIDIA-Linux-x86_64-340.108/kernel/nv-linux.h:122:10: fatal error: asm/kmap_types.h: No such file or directory

    Tried the 390 driver, but it does not support the Quadro 450.

    Is there a way to get this card working?

    TIA!

  5. #5
    Join Date
    Jun 2008
    Location
    East of Podunk
    Posts
    33,717
    Blog Entries
    15

    Default Re: NVIDIA drivers completely broken after last update

    Quote Originally Posted by omnitec View Post
    Having the same problem:

    5.14.21-150400.24.18-default
    openSUSE Leap 15.4

    After updating last week, this secondary vider card failed to run:

    NVIDIA G98 [Quadro NVS 450]

    Initially it displayed a black background and would allow a mouse pointer, but after logging in (Gnome Classic, not Wayland) it was not a valid display.

    Blacklisted noveau and located the compatible driver from Nvidia:

    NVIDIA-Linux-x86_64-340.108.run

    BUT compile fails:

    /tmp/selfgz11750/NVIDIA-Linux-x86_64-340.108/kernel/nv-linux.h:122:10: fatal error: asm/kmap_types.h: No such file or directory

    Tried the 390 driver, but it does not support the Quadro 450.

    Is there a way to get this card working?

    TIA!
    Hi
    Have a look around the Nvidia forums for patches of the 340.108 driver to work with that kernel. You can then create a 'patched' run file to try installing, instructions should be found on the nvidia forum, but if/when find patches, post back here.
    Cheers Malcolm °¿° (Linux Counter #276890)
    SUSE SLE, openSUSE Leap/Tumbleweed (x86_64) | GNOME DE
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!

  6. #6

    Default Re: NVIDIA drivers completely broken after last update

    Quote Originally Posted by malcolmlewis View Post
    Hi
    Have a look around the Nvidia forums for patches of the 340.108 driver to work with that kernel. You can then create a 'patched' run file to try installing, instructions should be found on the nvidia forum, but if/when find patches, post back here.
    Found a patch script here:

    https://www.if-not-true-then-false.c...vidia-patcher/

    The patch ran successfully, .. as did the installation script, ..

    On restart, nothing different; last lines in the nvidia log are:

    -> Installing both new and classic TLS OpenGL libraries.
    -> Installing both new and classic TLS 32bit OpenGL libraries.

    Only change in modprobe.d is a new version of nvidia.conf with blacklist noveau.

  7. #7
    Join Date
    Jun 2008
    Location
    East of Podunk
    Posts
    33,717
    Blog Entries
    15

    Default Re: NVIDIA drivers completely broken after last update

    Quote Originally Posted by omnitec View Post
    Found a patch script here:

    https://www.if-not-true-then-false.c...vidia-patcher/

    The patch ran successfully, .. as did the installation script, ..

    On restart, nothing different; last lines in the nvidia log are:

    -> Installing both new and classic TLS OpenGL libraries.
    -> Installing both new and classic TLS 32bit OpenGL libraries.

    Only change in modprobe.d is a new version of nvidia.conf with blacklist noveau.
    Hi
    Can you run the command `mkinitrd` to ensure nouveau is blacklisted, also can you show the output from;

    Code:
    /sbin/lspci -nnk | egrep -A3 "VGA|Display|3D"
    Cheers Malcolm °¿° (Linux Counter #276890)
    SUSE SLE, openSUSE Leap/Tumbleweed (x86_64) | GNOME DE
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!

  8. #8

    Arrow Re: NVIDIA drivers completely broken after last update

    Quote Originally Posted by malcolmlewis View Post
    Hi
    Can you run the command `mkinitrd` to ensure nouveau is blacklisted, also can you show the output from;

    Code:
    /sbin/lspci -nnk | egrep -A3 "VGA|Display|3D"
    mkinitrd, no change;

    00:02.0 VGA compatible controller [0300]: Intel Corporation CometLake-S GT2 [UHD Graphics 630] [8086:9bc5] (rev 05)
    Subsystem: ASUSTeK Computer Inc. Device [1043:8694]
    Kernel driver in use: i915
    Kernel modules: i915
    --
    03:00.0 3D controller [0302]: NVIDIA Corporation G98 [Quadro NVS 450] [10de:06fa] (rev a1)
    Subsystem: NVIDIA Corporation Device [10de:0619]
    Kernel modules: nouveau
    04:00.0 VGA compatible controller [0300]: NVIDIA Corporation G98 [Quadro NVS 450] [10de:06fa] (rev a1)
    Subsystem: NVIDIA Corporation Device [10de:0619]
    Kernel modules: nouveau

  9. #9
    Join Date
    Feb 2019
    Location
    Russia still D‑':
    Posts
    2,152

    Default Re: NVIDIA drivers completely broken after last update

    Quote Originally Posted by omnitec View Post
    Having the same problem:

    5.14.21-150400.24.18-default
    openSUSE Leap 15.4

    After updating last week, this secondary vider card failed to run:

    NVIDIA G98 [Quadro NVS 450]

    Initially it displayed a black background and would allow a mouse pointer, but after logging in (Gnome Classic, not Wayland) it was not a valid display.

    Blacklisted noveau and located the compatible driver from Nvidia:

    NVIDIA-Linux-x86_64-340.108.run

    BUT compile fails:

    /tmp/selfgz11750/NVIDIA-Linux-x86_64-340.108/kernel/nv-linux.h:122:10: fatal error: asm/kmap_types.h: No such file or directory

    Tried the 390 driver, but it does not support the Quadro 450.

    Is there a way to get this card working?
    You need 340 driver = G03.
    Packages from community user: https://software.opensuse.org/search...ject=ALL&q=g03
    Add repo. Uninstall Nvidia drivers, uninstall nouveau drivers, reboot, install G03 drivers from command prompt.

    Card is too slow, not for gaming, VGA output is bad. Consider for upgrade.

  10. #10

    Default Re: NVIDIA drivers completely broken after last update

    Similar problem with me and the following system:
    Operating System: openSUSE Leap 15.4
    KDE Plasma Version: 5.25.90
    KDE Frameworks Version: 5.98.0
    Qt Version: 5.15.5
    Kernel Version: 5.14.21-150400.24.18-default (64-bit)
    Graphics Platform: X11
    Processors: 12 × Intel® Core™ i7-10850H CPU @ 2.70GHz
    Memory: 31,2 GiB of RAM
    Graphics Processor: Quadro RTX 3000/PCIe/SSE2
    Manufacturer: HP
    Product Name: HP ZBook Fury 17 G7 Mobile Workstation

    Upgrading the kernel form 5.14.21-150400.24.18-default (64-bit) to 5.14.21-150400.24.21-default (64-bit). After reboot the system did not run any more and ended with a screen of "kernel panic". I had to use previous kernel at the boot screen. The command inxi -SGaz --vs produced the following output
    Code:
    nxi 3.3.21-00 (2022-08-22)
    System:
      Kernel: 5.14.21-150400.24.18-default arch: x86_64 bits: 64 compiler: gcc
        v: 7.5.0 parameters: BOOT_IMAGE=/vmlinuz-5.14.21-150400.24.18-default
        root=UUID=85cb5677-e732-4bcf-b769-b98aee0a5c3c splash=silent
        mitigations=auto quiet
      Desktop: KDE Plasma v: 5.25.5 tk: Qt v: 5.15.5 wm: kwin_x11 vt: 7
        dm: SDDM Distro: openSUSE Leap 15.4
    Graphics:
      Device-1: NVIDIA TU106GLM [Quadro RTX 3000 Mobile / Max-Q]
        vendor: Hewlett-Packard driver: nvidia v: 470.141.03
        alternate: nouveau,nvidia_drm non-free: 515.xx+ status: current (as of
        2022-08) arch: Turing code: TUxxx process: TSMC 12nm built: 2018-22 pcie:
        gen: 1 speed: 2.5 GT/s lanes: 16 link-max: gen: 3 speed: 8 GT/s ports:
        active: none off: eDP-1 empty: DP-1,DP-2,DP-3 bus-ID: 01:00.0
        chip-ID: 10de:1f36 class-ID: 0300
      Device-2: Quanta HP HD Camera type: USB driver: uvcvideo bus-ID: 1-7:3
        chip-ID: 0408:5347 class-ID: 0e02 serial: <filter>
      Display: x11 server: X.Org v: 1.20.3 with: Xwayland v: 21.1.4
        compositor: kwin_x11 driver: X: loaded: modesetting,nvidia
        unloaded: fbdev,nouveau,vesa alternate: nv gpu: nvidia,nvidia-nvswitch
        display-ID: :0 screens: 1
      Screen-1: 0 s-res: 1920x1080 s-dpi: 128 s-size: 381x211mm (15.00x8.31")
        s-diag: 436mm (17.15")
      Monitor-1: DP-6 pos: primary res: 1920x1080 hz: 60 dpi: 128
        size: 382x215mm (15.04x8.46") diag: 438mm (17.26") modes: N/A
      Monitor-2: eDP-1-1 size-res: N/A modes: N/A
      OpenGL: renderer: Quadro RTX 3000/PCIe/SSE2 v: 4.6.0 NVIDIA 470.141.03
        direct render: Yes
    I uninstalled Nvidia driver hoping this will solve the problem. How wrong was I. The reboot with .24-21 kernel ended again with kernel panic. I also tried with the latest Nvidia driver 515.65 with the same result. I have to boot with .24-18 kernel meaning that there is an issue with the latest kernel and not with Nvidia driver.

    Am I right.

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •