lm sensors Asus motherboard ROG STRIX B450-F GAMING II

[Svyatko]

https://www.kernel.org/doc/html/late...n/nct6683.html

The driver has only been tested with the Intel firmware, and by default only instantiates on Intel boards. To enable it on non-Intel boards, set the ‘force’ module parameter to 1.

https://www.phoronix.com/scan.php?pa...k-Some-Sensors
https://www.phoronix.com/scan.php?pa...-Sensors-Linux
https://github.com/torvalds/linux/bl...wmon/nct6683.c

There is no support for your hardware with Leap 15.3's standard kernel.
May work with Leap 15.4 or Leap 15.3 with a new kernel.

[dagring]

Hi
If you run `sensors-detect --auto` does it show a NC type sensor? If you add the following to grub kernel options `acpi_enforce_resources=lax` does that make a difference?

It does not make a difference. I got a list when I ran:

find /lib/modules -name nct* 
/lib/modules/5.3.18-150300.59.63-default/kernel/drivers/hwmon/nct6775.ko.xz 
/lib/modules/5.3.18-150300.59.63-default/kernel/drivers/hwmon/nct6683.ko.xz 
/lib/modules/5.3.18-150300.59.63-default/kernel/drivers/hwmon/nct7802.ko.xz 
/lib/modules/5.3.18-150300.59.63-default/kernel/drivers/hwmon/nct7904.ko.xz

I tried to run modprobe on each of the entries, but the output of sensors is just a few lines, no CPU temp.

Dag R

[dagring]

https://www.kernel.org/doc/html/late...n/nct6683.html



https://www.phoronix.com/scan.php?pa...k-Some-Sensors
https://www.phoronix.com/scan.php?pa...-Sensors-Linux
https://github.com/torvalds/linux/bl...wmon/nct6683.c

There is no support for your hardware with Leap 15.3's standard kernel.
May work with Leap 15.4 or Leap 15.3 with a new kernel.

That's what I was afraid of, but I have read about some users who manged to work it out, but they may have other kernels or the motherboard is not exactly like the one I have.

Dag

[karlmistelberger]

It does not make a difference. I got a list when I ran:

find /lib/modules -name nct* 
/lib/modules/5.3.18-150300.59.63-default/kernel/drivers/hwmon/nct6775.ko.xz 
/lib/modules/5.3.18-150300.59.63-default/kernel/drivers/hwmon/nct6683.ko.xz 
/lib/modules/5.3.18-150300.59.63-default/kernel/drivers/hwmon/nct7802.ko.xz 
/lib/modules/5.3.18-150300.59.63-default/kernel/drivers/hwmon/nct7904.ko.xz

I tried to run modprobe on each of the entries, but the output of sensors is just a few lines, no CPU temp.

It definitely works with Tumbleweed:

erlangen:~ # inxi -as      
Sensors:   Message: No sensor data found. Is lm-sensors configured? 
erlangen:~ # modprobe nct6683                              
erlangen:~ # inxi -as         
Sensors:   System Temperatures:cpu: N/A mobo: N/A gpu: amdgpu temp: 54.0 C 
           Fan Speeds (RPM):cpu: 1143 fan-2: 0 fan-3: 0 fan-4: 0 fan-5: 0 fan-6: 0 fan-7: 0 fan-8: 0 fan-9: 0 fan-10: 0 
           gpu: amdgpu fan: 970 
erlangen:~ #

Did you rerun sensors-detect --auto?

[Svyatko]

It definitely works with Tumbleweed:

erlangen:~ # inxi -as      
Sensors:   Message: No sensor data found. Is lm-sensors configured? 
erlangen:~ # modprobe nct6683                              
erlangen:~ # inxi -as         
Sensors:   System Temperatures:cpu: N/A mobo: N/A gpu: amdgpu temp: 54.0 C 
           Fan Speeds (RPM):cpu: 1143 fan-2: 0 fan-3: 0 fan-4: 0 fan-5: 0 fan-6: 0 fan-7: 0 fan-8: 0 fan-9: 0 fan-10: 0 
           gpu: amdgpu fan: 970 
erlangen:~ #

Did you rerun sensors-detect --auto?

Not for Leap 15.3 with standard kernel: https://forums.opensuse.org/showthre...01#post3127001

[dagring]

It definitely works with Tumbleweed:

erlangen:~ # inxi -as      
Sensors:   Message: No sensor data found. Is lm-sensors configured? 
erlangen:~ # modprobe nct6683                              
erlangen:~ # inxi -as         
Sensors:   System Temperatures:cpu: N/A mobo: N/A gpu: amdgpu temp: 54.0 C 
           Fan Speeds (RPM):cpu: 1143 fan-2: 0 fan-3: 0 fan-4: 0 fan-5: 0 fan-6: 0 fan-7: 0 fan-8: 0 fan-9: 0 fan-10: 0 
           gpu: amdgpu fan: 970 
erlangen:~ #

Did you rerun sensors-detect --auto?

You have kernel 5.17 see this article https://www.phoronix.com/scan.php?pa...mp-New-AMD-Zen

Dag R