Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: lm sensors Asus motherboard ROG STRIX B450-F GAMING II

  1. #1

    Default lm sensors Asus motherboard ROG STRIX B450-F GAMING II

    Hi, I have tried to run sensors detect but the output is slim. I only get the motherboard temp, but nothing more. I have read somewhere it is made a driver which will be part of kernel 5.17- This driver will make it possible to read the sensors on newer Asus boards. The kernel I'm using is 5.3. Have someone any idea about how to fix this in the mean time?

    Dag

  2. #2
    Join Date
    Jan 2014
    Location
    Erlangen
    Posts
    3,837

    Default Re: lm sensors Asus motherboard ROG STRIX B450-F GAMING II

    Same problem with Tumbleweed:
    Code:
    erlangen:~ # inxi -zMS 
    System:    Kernel: 5.17.4-1-default x86_64 bits: 64 Console: pty pts/1 Distro: openSUSE Tumbleweed 20220507 
    Machine:   Type: Desktop Mobo: Micro-Star model: B550-A PRO (MS-7C56) v: 2.0 serial: <filter> UEFI: American Megatrends LLC. 
               v: A.90 date: 03/17/2022 
    erlangen:~ #
    Code:
    erlangen:~ # sensors            
    k10temp-pci-00c3 
    Adapter: PCI adapter 
    Tctl:         +51.6°C   
    Tccd1:        +46.8°C   
    
    nvme-pci-0100 
    Adapter: PCI adapter 
    Composite:    +46.9°C  (low  = -273.1°C, high = +84.8°C) 
                           (crit = +84.8°C) 
    Sensor 1:     +46.9°C  (low  = -273.1°C, high = +65261.8°C) 
    Sensor 2:     +46.9°C  (low  = -273.1°C, high = +65261.8°C) 
    
    amdgpu-pci-2b00 
    Adapter: PCI adapter 
    vddgfx:      687.00 mV  
    fan1:        1009 RPM  (min =    0 RPM, max = 3500 RPM) 
    edge:         +52.0°C  (crit = +97.0°C, hyst = -273.1°C) 
    slowPPT:       3.02 W  (cap =  36.00 W) 
    
    erlangen:~ #
    i7-6700K (2016), i5-8250U (2018), AMD Ryzen 5 3400G (2020), 5600X (2022) openSUSE Tumbleweed, KDE Plasma

  3. #3
    Join Date
    Jun 2008
    Location
    East of Podunk
    Posts
    33,091
    Blog Entries
    15

    Default Re: lm sensors Asus motherboard ROG STRIX B450-F GAMING II

    Quote Originally Posted by dagring View Post
    Hi, I have tried to run sensors detect but the output is slim. I only get the motherboard temp, but nothing more. I have read somewhere it is made a driver which will be part of kernel 5.17- This driver will make it possible to read the sensors on newer Asus boards. The kernel I'm using is 5.3. Have someone any idea about how to fix this in the mean time?

    Dag
    Hi
    If you run `sensors-detect --auto` does it show a NC type sensor? If you add the following to grub kernel options `acpi_enforce_resources=lax` does that make a difference?
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    SUSE SLE, openSUSE Leap/Tumbleweed (x86_64) | GNOME DE
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!

  4. #4
    Join Date
    Jan 2014
    Location
    Erlangen
    Posts
    3,837

    Default Re: lm sensors Asus motherboard ROG STRIX B450-F GAMING II

    Quote Originally Posted by malcolmlewis View Post
    Hi
    If you run `sensors-detect --auto` does it show a NC type sensor? If you add the following to grub kernel options `acpi_enforce_resources=lax` does that make a difference?
    Ran "modeprobe nct6683" and retried.
    Code:
    erlangen:~ # sensors 
    k10temp-pci-00c3 
    Adapter: PCI adapter 
    Tctl:         +44.4°C   
    Tccd1:        +45.5°C   
    
    nvme-pci-0100 
    Adapter: PCI adapter 
    Composite:    +44.9°C  (low  = -273.1°C, high = +84.8°C) 
                           (crit = +84.8°C) 
    Sensor 1:     +44.9°C  (low  = -273.1°C, high = +65261.8°C) 
    Sensor 2:     +43.9°C  (low  = -273.1°C, high = +65261.8°C) 
    
    nct6687-isa-0a20 
    erlangen:~ # sensors 
    k10temp-pci-00c3 
    Adapter: PCI adapter 
    Tctl:         +42.6°C   
    Tccd1:        +42.5°C   
    
    nvme-pci-0100 
    Adapter: PCI adapter 
    Composite:    +44.9°C  (low  = -273.1°C, high = +84.8°C) 
                           (crit = +84.8°C) 
    Sensor 1:     +44.9°C  (low  = -273.1°C, high = +65261.8°C) 
    Sensor 2:     +43.9°C  (low  = -273.1°C, high = +65261.8°C) 
    
    nct6687-isa-0a20 
    Adapter: ISA adapter 
    VIN0:               1.01 V  (min =  +0.00 V, max =  +0.00 V) 
    VIN1:             992.00 mV (min =  +0.00 V, max =  +0.00 V) 
    VIN2:             992.00 mV (min =  +0.00 V, max =  +0.00 V) 
    VIN3:             672.00 mV (min =  +0.00 V, max =  +0.00 V) 
    VIN4:             320.00 mV (min =  +0.00 V, max =  +0.00 V) 
    VIN5:             784.00 mV (min =  +0.00 V, max =  +0.00 V) 
    VIN6:             704.00 mV (min =  +0.00 V, max =  +0.00 V) 
    VIN7:               1.54 V  (min =  +0.00 V, max =  +0.00 V) 
    VCC:                3.34 V  (min =  +0.00 V, max =  +0.00 V) 
    VTT:                1.82 V  (min =  +0.00 V, max =  +0.00 V) 
    fan1:             1143 RPM  (min =    0 RPM) 
    fan2:                0 RPM  (min =    0 RPM) 
    fan3:                0 RPM  (min =    0 RPM) 
    fan4:                0 RPM  (min =    0 RPM) 
    fan5:                0 RPM  (min =    0 RPM) 
    fan6:                0 RPM  (min =    0 RPM) 
    fan7:                0 RPM  (min =    0 RPM) 
    fan8:                0 RPM  (min =    0 RPM) 
    fan9:                0 RPM  (min =    0 RPM) 
    fan10:               0 RPM  (min =    0 RPM) 
    AMD TSI Addr 98h:  +42.0°C  (low  =  +0.0°C) 
                                (high =  +0.0°C, hyst =  +0.0°C) 
                                (crit =  +0.0°C)  sensor = AMD AMDSI 
    Diode 0 (curr):    +42.0°C  (low  =  +0.0°C) 
                                (high =  +0.0°C, hyst =  +0.0°C) 
                                (crit =  +0.0°C)  sensor = thermal diode 
    Thermistor 15:     +40.0°C  (low  =  +0.0°C) 
                                (high =  +0.0°C, hyst =  +0.0°C) 
                                (crit =  +0.0°C)  sensor = thermistor 
    Thermistor 1:      +42.5°C  (low  =  +0.0°C) 
                                (high =  +0.0°C, hyst =  +0.0°C) 
                                (crit =  +0.0°C)  sensor = thermistor 
    Thermistor 16:     +42.0°C  (low  =  +0.0°C) 
                                (high =  +0.0°C, hyst =  +0.0°C) 
                                (crit =  +0.0°C)  sensor = thermistor 
    Thermistor 0:      +37.5°C  (low  =  +0.0°C) 
                                (high =  +0.0°C, hyst =  +0.0°C) 
                                (crit =  +0.0°C)  sensor = thermistor 
    Thermistor 15:     +40.0°C  (low  =  +0.0°C) 
                                (high = +126.0°C, hyst = +30.0°C) 
                                (crit =  +0.0°C)  sensor = thermistor 
    intrusion0:       ALARM 
    beep_enable:      disabled 
    
    amdgpu-pci-2b00 
    Adapter: PCI adapter 
    vddgfx:      762.00 mV  
    fan1:         978 RPM  (min =    0 RPM, max = 3500 RPM) 
    edge:         +48.0°C  (crit = +97.0°C, hyst = -273.1°C) 
    slowPPT:       3.10 W  (cap =  36.00 W) 
    
    erlangen:~ #
    i7-6700K (2016), i5-8250U (2018), AMD Ryzen 5 3400G (2020), 5600X (2022) openSUSE Tumbleweed, KDE Plasma

  5. #5

    Default Re: lm sensors Asus motherboard ROG STRIX B450-F GAMING II

    When I try sensors detect --auto it says:
    Code:
    Note: there is no driver for ITE IT8665E Super IO Sensors yet.
    
    I can't find any NC-type of sensor. Maybe I haven't checked properly. I will try to put the grub kernel option in tomorrow, and check it out.

    I got the message when I tried the modprobe sugestion:

    Code:
    modprobe: ERROR: could not insert 'nct6683': No such device
    
    Dag R

  6. #6
    Join Date
    Jan 2014
    Location
    Erlangen
    Posts
    3,837

    Default Re: lm sensors Asus motherboard ROG STRIX B450-F GAMING II

    Quote Originally Posted by dagring View Post
    When I try sensors detect --auto it says:
    Code:
    Note: there is no driver for ITE IT8665E Super IO Sensors yet.
    
    I can't find any NC-type of sensor. Maybe I haven't checked properly. I will try to put the grub kernel option in tomorrow, and check it out.

    I got the message when I tried the modprobe sugestion:

    Code:
    modprobe: ERROR: could not insert 'nct6683': No such device
    
    Dag R
    I ran:
    Code:
    erlangen:~ # find /usr/lib/modules/5.17.5-1-default/ -name nct* 
    /usr/lib/modules/5.17.5-1-default/kernel/drivers/hwmon/nct6683.ko.zst 
    /usr/lib/modules/5.17.5-1-default/kernel/drivers/hwmon/nct6775.ko.zst 
    /usr/lib/modules/5.17.5-1-default/kernel/drivers/hwmon/nct7802.ko.zst 
    /usr/lib/modules/5.17.5-1-default/kernel/drivers/hwmon/nct7904.ko.zst 
    erlangen:~ #
    Then i tried from top to bottom
    Code:
    erlangen:~ # modprobe nct6683 
    erlangen:~ # inxi -as  
    Sensors:   System Temperatures:cpu: N/A mobo: N/A gpu: amdgpu temp: 55.0 C 
               Fan Speeds (RPM):cpu: 1101 fan-2: 0 fan-3: 0 fan-4: 0 fan-5: 0 fan-6: 0 fan-7: 0 fan-8: 0 fan-9: 0 fan-10: 0 
               gpu: amdgpu fan: 976 
    erlangen:~ #
    i7-6700K (2016), i5-8250U (2018), AMD Ryzen 5 3400G (2020), 5600X (2022) openSUSE Tumbleweed, KDE Plasma

  7. #7

    Default Re: lm sensors Asus motherboard ROG STRIX B450-F GAMING II

    I have tried to search for kernel module :
    Code:
    /usr/lib/modules/5.17.5-1-default/ -name nct*
    no such file.

    I have tried to add the
    Code:
    acpi_enforce_resources=lax
    I tried to do this in Yast. There is another parameter there already, should I just put in a comma and then the 'acpi_enforce..'? Then save and reboot, or is it another way?

    Dag R

  8. #8
    Join Date
    Jun 2008
    Location
    East of Podunk
    Posts
    33,091
    Blog Entries
    15

    Default Re: lm sensors Asus motherboard ROG STRIX B450-F GAMING II

    Quote Originally Posted by dagring View Post
    I have tried to search for kernel module :
    Code:
    /usr/lib/modules/5.17.5-1-default/ -name nct*
    no such file.

    I have tried to add the
    Code:
    acpi_enforce_resources=lax
    I tried to do this in Yast. There is another parameter there already, should I just put in a comma and then the 'acpi_enforce..'? Then save and reboot, or is it another way?

    Dag R
    Hi
    You already had an `acpi_enforce....` entry? If so what was it? If you remove, what happens? I would suggest you reboot and just press the 'e' key and edit it out temporarily that particular entry and see what happens.
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    SUSE SLE, openSUSE Leap/Tumbleweed (x86_64) | GNOME DE
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!

  9. #9
    Join Date
    Jan 2014
    Location
    Erlangen
    Posts
    3,837

    Default Re: lm sensors Asus motherboard ROG STRIX B450-F GAMING II

    Quote Originally Posted by dagring View Post
    I have tried to search for kernel module :
    Code:
    /usr/lib/modules/5.17.5-1-default/ -name nct*
    no such file.
    I see. You are using Leap. Try
    Code:
    find /lib/modules -name nct*
    i7-6700K (2016), i5-8250U (2018), AMD Ryzen 5 3400G (2020), 5600X (2022) openSUSE Tumbleweed, KDE Plasma

  10. #10

    Default Re: lm sensors Asus motherboard ROG STRIX B450-F GAMING II

    I don't have the 'acpi..' entry. I have 'splash=silent quiet'. My question was. How do I add an entry? Do I seperate the two with a comma, or how?

    Dag R

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •