*Participation Requested*
MicroOS Desktop Use to Help with ALP Feedback
-
Scroll wiel Logitech M500 werkt niet.
Hallo,
Mijn oude Logitech muis was aan vervanging toe, dus heb ik dezelfde muis (de Logitech M500) weer gekocht.
De muis werkt, alleen het scroll wiel niet.
En da's vreemd want met de oude muis van hetzelfde type werkte dit wel.
In het "YaST configuratiecentrum" (KDE) zouden de instellingen voor de muis toch bij "Hardware" moeten staan.
Maar daar staat geen link/pictogram om de muis in te stellen.
Bij "Systeeminstellingen" Is bij "Hardware" en "Invoerapparaten" wel een "Muis" link/pictogram te vinden.
Alleen kunnen daar geen instellingen v.w.b. het scroll wiel gemaakt worden.
Waarschijnlijk is de oorzaak een vastgelopen computer, een paar dagen geleden.
Niets werkte meer en alleen met een harde reset kon ik weer verder.
Wie weet hoe ik dit probleem op kan lossen ?
Groet,
Flash2020
-
Re: Scroll wiel Logitech M500 werkt niet.
Kan je eens met "lsusb" de vendor:product ID van de muis opzoeken de output van "lsusb -v -d vendor:product" van de oude muis met die van de nieuwe muis vergelijken? Enige verschillen?
Heb je de nieuwe muis ook al op een andere machine geprobeerd? Misschien is de muis wel kapot...
Last edited by marel; 31-May-2021 at 10:31.
Reason: no smilies!
-
-
Re: Scroll wiel Logitech M500 werkt niet.
Hallo,
Het commando "lsusb" geeft een lijst met apparaten.
De bewuste muis staat als volgt in die lijst.
Bus 001 Device 012: ID 046d:c069 Logitech, Inc. M-U0007 [Corded Mouse M500]
Ik neem aan dat ik dan het commando "lsusb -v -d vendor:046d:c069" moet gebruiken ?
Dat commando geeft helaas geen enkele informatie.
Maar ik heb het vermoeden dat ik dat commando niet goed gebruik.
Groet,
Flash2020
-
Re: Scroll wiel Logitech M500 werkt niet.
Dan kijk je toch even in

In dit geval
Maar wel graag alle computer uitvoer tussen CODE labels! Dat is de knop met het # bovenaan je edit ruimte. En dan copy/paste daartussen. En uiteraard met de commandoregel, zodat wij kunt controleren wat je doet (wij geloven niemand).
Henk van Velden
-
Re: Scroll wiel Logitech M500 werkt niet.
 Originally Posted by hcvv
Of "lsusb -v -d 046d:c069", zogezegd "vendor:" weglaten.
-
Re: Scroll wiel Logitech M500 werkt niet.
 Originally Posted by marel
Of "lsusb -v -d 046d:c069", zogezegd "vendor:" weglaten.
De versie met -s was korter om in te tikken
Henk van Velden
-
Re: Scroll wiel Logitech M500 werkt niet.
Hallo,
De oude muis doet helaas niets meer.
Het commando met de nieuwe muis geeft het volgende resultaat.
Code:
amdefx@localhost:~> lsusb -v -s 1:12
Bus 001 Device 012: ID 046d:c069 Logitech, Inc. M-U0007 [Corded Mouse M500]
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc069 M-U0007 [Corded Mouse M500]
bcdDevice 56.01
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 71
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0006 1x 6 bytes
bInterval 10
amdefx@localhost:~>
Ik zal beide muizen morgen op een linux laptop proberen.
Die laptop is nu even niet beschikbaar.
Ik probeer dan ook even een andere Logitech muis.
Groet,
Flash2020
-
Re: Scroll wiel Logitech M500 werkt niet.
Hallo,
Hierbij de resultaten van de test op de desktop PC en laptop.
Eerst de Logitech M500 op de desktop PC.
Code:
amdefx@@localhost:~> lsusb
Bus 001 Device 012: ID 046d:c069 Logitech, Inc. M-U0007 [Corded Mouse M500]
amdefx@@localhost:~> lsusb -v -s 1:12
Bus 001 Device 012: ID 046d:c069 Logitech, Inc. M-U0007 [Corded Mouse M500]
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc069 M-U0007 [Corded Mouse M500]
bcdDevice 56.01
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 71
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0006 1x 6 bytes
bInterval 10
amdefx@@localhost:~>
En dezelfde muis op de laptop (Linux Mint met Cinnamon).
Code:
amdefx@amdefx-M7x0K:~$ lsusb
Bus 002 Device 003: ID 046d:c069 Logitech, Inc. M-U0007 [Corded Mouse M500]
amdefx@amdefx-M7x0K:~$ lsusb -v -s 2:3
Bus 002 Device 003: ID 046d:c069 Logitech, Inc. M-U0007 [Corded Mouse M500]
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc069 M-U0007 [Corded Mouse M500]
bcdDevice 56.01
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 71
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0006 1x 6 bytes
bInterval 10
amdefx@amdefx-M7x0K:~$
De muis werkt op beide PC's alleen het scrollwiel helaas niet.
De oude muis van hetzelfde type (Logitech M500) werkt helemaal niet meer.
Ik heb een simpele muis (Logitech M90) op beide computers aangesloten.
De muis wordt vreemd genoeg herkend als een Logitech M105.
Alles werkt, ook het scrollwiel.
De Logitech M90 op de desktop.
Code:
amdefx@@localhost:~> lsusb
Bus 001 Device 008: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
amdefx@@localhost:~> lsusb -v -s 1:8
Bus 001 Device 008: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc077 M105 Optical Mouse
bcdDevice 72.00
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 46
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 10
amdefx@@localhost:~>
En dezelfde muis op de laptop.
Code:
amdefx@amdefx-M7x0K:~$ lsusb
Bus 002 Device 002: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
amdefx@amdefx-M7x0K:~$ lsusb -v -s 2:2
Bus 002 Device 002: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x046d Logitech, Inc.
idProduct 0xc077 M105 Optical Mouse
bcdDevice 72.00
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.11
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 46
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 10
amdefx@amdefx-M7x0K:~$
Wel vreemd dat een spik splinternieuwe muis het op beide computers niet volledig (scroll wiel) doet.
De kans dat de muis defect is acht ik niet zo groot.
De muis wordt wel herkend, ik vermoed dat de muis niet goed door linux wordt ingesteld.
Hebben jullie nog ideen waar dit aan kan liggen ?
Groet,
Flash2020
-
Re: Scroll wiel Logitech M500 werkt niet.
Even je eerste twee dumps gedifft maar precies hetzelfde zoals verwacht, maar op op Mint doet de scrollfunctie het niet dus brengt je niet verder.
Wat ik zou doen is "xev" installeren "sudo zypper install xev" en dan runnen.
Je zou dan een wit window moet zien verschijnen en als je daar je muis point in beweegt wordt alles wat X van je muis ontvangt geprint. Gebeurd er iets als je aan het scroll wheel draait?
Als dit (ook) niet het geval is dan zou ik met de muis voor garantie terug gaan.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|