Page 3 of 3 FirstFirst 123
Results 21 to 27 of 27

Thread: Please help me obtain sound production in Leap 15.3.

  1. #21

    Default Re: Please help me obtain sound production in Leap 15.3.

    Now in the above data you can see that after receiving the result of “Enabling PulseAudio for ALSA…”, et cetera, “rebooting” my virtual computer into Leap 15.3, and entering as a regular user the above systemctl... command that I obtained the bizarre result I reported earlier in this “thread” of postings that the pulseaudio.service was reported as “disabled disabled”! Note also in the above output that pipewire.socket was reported as “enabled enabled”. (I do not know why in the above outputs “enabled” or “disabled” was reported twice each time.)

    Next, except for prompts, in a form overlapping, but not always exactly the same as poster deano_ferrari’s suggestions, I entered

    Code:
    newbie@linux-hdi0:~> su
    Password: 
    (In this sort of situation in Leap 15.3 I entered my “root”-user password; and after entering that password it was not displayed in LXTerminal.)
    linux-hdi0:/home/newbie # 
    linux-hdi0:/home/newbie # 
    linux-hdi0:/home/newbie # systemctl --user disable --now pipewire.socket
    Failed to connect to bus: Operation not permitted (consider using --machine=<user>@.host --user to connect to bus of other user)
    linux-hdi0:/home/newbie #
    Being rather ignorant of the matter, I did not try to follow the above advice regarding “--machine=<user>@.host –user”.

    As a “root” user, except for prompts, I entered the following command and obtained the ensuing results.

    Code:
    linux-hdi0:/home/newbie # journalctl -b |grep pulse
    Jul 29 14:22:39 linux-hdi0.site systemd[1987]: pulseaudio.socket: Succeeded.
    Jul 29 14:22:39 linux-hdi0.site pulseaudio[2334]: W: [pulseaudio] core-util.c: Failed to open configuration file '/home/newbie/.config/pulse//daemon.conf': Permission denied
    Jul 29 14:22:39 linux-hdi0.site pulseaudio[2334]: W: [pulseaudio] daemon-conf.c: Failed to open configuration file: Permission denied
    Jul 29 14:22:39 linux-hdi0.site systemd[2047]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
    Jul 29 14:22:39 linux-hdi0.site systemd[2047]: pulseaudio.service: Failed with result 'exit-code'.
    Jul 29 14:22:39 linux-hdi0.site systemd[2047]: pulseaudio.service: Scheduled restart job, restart counter is at 1.
    Jul 29 14:22:39 linux-hdi0.site pulseaudio[2381]: W: [pulseaudio] core-util.c: Failed to open configuration file '/home/newbie/.config/pulse//daemon.conf': Permission denied
    Jul 29 14:22:39 linux-hdi0.site pulseaudio[2381]: W: [pulseaudio] daemon-conf.c: Failed to open configuration file: Permission denied
    Jul 29 14:22:39 linux-hdi0.site systemd[2047]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
    Jul 29 14:22:39 linux-hdi0.site systemd[2047]: pulseaudio.service: Failed with result 'exit-code'.
    Jul 29 14:22:39 linux-hdi0.site systemd[2047]: pulseaudio.service: Scheduled restart job, restart counter is at 2.
    Jul 29 14:22:40 linux-hdi0.site pulseaudio[2383]: W: [pulseaudio] core-util.c: Failed to open configuration file '/home/newbie/.config/pulse//daemon.conf': Permission denied
    Jul 29 14:22:40 linux-hdi0.site pulseaudio[2383]: W: [pulseaudio] daemon-conf.c: Failed to open configuration file: Permission denied
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.service: Failed with result 'exit-code'.
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.service: Scheduled restart job, restart counter is at 3.
    Jul 29 14:22:40 linux-hdi0.site pulseaudio[2393]: W: [pulseaudio] core-util.c: Failed to open configuration file '/home/newbie/.config/pulse//daemon.conf': Permission denied
    Jul 29 14:22:40 linux-hdi0.site pulseaudio[2393]: W: [pulseaudio] daemon-conf.c: Failed to open configuration file: Permission denied
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.service: Failed with result 'exit-code'.
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.service: Scheduled restart job, restart counter is at 4.
    Jul 29 14:22:40 linux-hdi0.site pulseaudio[2398]: W: [pulseaudio] core-util.c: Failed to open configuration file '/home/newbie/.config/pulse//daemon.conf': Permission denied
    Jul 29 14:22:40 linux-hdi0.site pulseaudio[2398]: W: [pulseaudio] daemon-conf.c: Failed to open configuration file: Permission denied
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.service: Failed with result 'exit-code'.
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.service: Scheduled restart job, restart counter is at 5.
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.service: Start request repeated too quickly.
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.service: Failed with result 'exit-code'.
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.socket: Failed with result 'service-start-limit-hit'.
    linux-hdi0:/home/newbie #
    Later as a regular user I entered that same command and obtained:

    Code:
    newbie@linux-hdi0:~> journalctl -b |grep pulse
    Hint: You are currently not seeing messages from other users and the system.
          Users in the 'systemd-journal' group can see all messages. Pass -q to
          turn off this notice.
    Jul 29 17:47:43 linux-hdi0.site pulseaudio[2182]: W: [pulseaudio] core-util.c: Failed to open configuration file '/home/newbie/.config/pulse//daemon.conf': Permission denied
    Jul 29 17:47:43 linux-hdi0.site pulseaudio[2182]: W: [pulseaudio] daemon-conf.c: Failed to open configuration file: Permission denied
    Jul 29 17:47:43 linux-hdi0.site systemd[1912]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
    Jul 29 17:47:43 linux-hdi0.site systemd[1912]: pulseaudio.service: Failed with result 'exit-code'.
    Jul 29 17:47:43 linux-hdi0.site systemd[1912]: pulseaudio.service: Scheduled restart job, restart counter is at 1.
    Jul 29 17:47:43 linux-hdi0.site pulseaudio[2190]: W: [pulseaudio] core-util.c: Failed to open configuration file '/home/newbie/.config/pulse//daemon.conf': Permission denied
    Jul 29 17:47:43 linux-hdi0.site pulseaudio[2190]: W: [pulseaudio] daemon-conf.c: Failed to open configuration file: Permission denied
    Jul 29 17:47:43 linux-hdi0.site systemd[1912]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
    Jul 29 17:47:43 linux-hdi0.site systemd[1912]: pulseaudio.service: Failed with result 'exit-code'.
    Jul 29 17:47:44 linux-hdi0.site systemd[1912]: pulseaudio.service: Scheduled restart job, restart counter is at 2.
    Jul 29 17:47:44 linux-hdi0.site pulseaudio[2191]: W: [pulseaudio] core-util.c: Failed to open configuration file '/home/newbie/.config/pulse//daemon.conf': Permission denied
    Jul 29 17:47:44 linux-hdi0.site pulseaudio[2191]: W: [pulseaudio] daemon-conf.c: Failed to open configuration file: Permission denied
    Jul 29 17:47:44 linux-hdi0.site systemd[1912]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
    Jul 29 17:47:44 linux-hdi0.site systemd[1912]: pulseaudio.service: Failed with result 'exit-code'.
    Jul 29 17:47:44 linux-hdi0.site systemd[1912]: pulseaudio.service: Scheduled restart job, restart counter is at 3.
    Jul 29 17:47:44 linux-hdi0.site pulseaudio[2192]: W: [pulseaudio] core-util.c: Failed to open configuration file '/home/newbie/.config/pulse//daemon.conf': Permission denied
    Jul 29 17:47:44 linux-hdi0.site pulseaudio[2192]: W: [pulseaudio] daemon-conf.c: Failed to open configuration file: Permission denied
    Jul 29 17:47:44 linux-hdi0.site systemd[1912]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
    Jul 29 17:47:44 linux-hdi0.site systemd[1912]: pulseaudio.service: Failed with result 'exit-code'.
    Jul 29 17:47:44 linux-hdi0.site systemd[1912]: pulseaudio.service: Scheduled restart job, restart counter is at 4.
    Jul 29 17:47:44 linux-hdi0.site pulseaudio[2193]: W: [pulseaudio] core-util.c: Failed to open configuration file '/home/newbie/.config/pulse//daemon.conf': Permission denied
    Jul 29 17:47:44 linux-hdi0.site pulseaudio[2193]: W: [pulseaudio] daemon-conf.c: Failed to open configuration file: Permission denied
    Jul 29 17:47:44 linux-hdi0.site systemd[1912]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
    Jul 29 17:47:44 linux-hdi0.site systemd[1912]: pulseaudio.service: Failed with result 'exit-code'.
    Jul 29 17:47:44 linux-hdi0.site systemd[1912]: pulseaudio.service: Scheduled restart job, restart counter is at 5.
    Jul 29 17:47:44 linux-hdi0.site systemd[1912]: pulseaudio.service: Start request repeated too quickly.
    Jul 29 17:47:44 linux-hdi0.site systemd[1912]: pulseaudio.service: Failed with result 'exit-code'.
    Jul 29 17:47:44 linux-hdi0.site systemd[1912]: pulseaudio.socket: Failed with result 'service-start-limit-hit'.
    newbie@linux-hdi0:~>
    Of course as a regular user this time I clicked on the triangle with an exclamation point within it located on the lower-left-hand corner of my Leap-15.3’s taskbar panel in the Lightweight X Windows System, version 11 (X11) Desktop Environment (LXDE), selected “Sound & Video”, then “PulseAudio Volume Control,” and obtained in a window entitled “Volume Control” the output, which I did not know how to copy, but could only retype, of

    Code:
    Connection to PulseAudio failed.  Automatic retry in 5s
    
    In this case this is likely because PUSE_SERVER in the Environment/X11 Root Windows Properties or default-server in client.conf is misconfigured.
    This situation can also arise when PulseAudio crashed and left stale details in the X11 Root Window.  If this is the case, then PulseAudio should autospawn again, or if this is not configured you should run start-pulseaudio-x11 manually.
    Except for prompts, I entered the following command and obtained the ensuing result:

    Code:
    newbie@linux-hdi0:~> su
    Password: 
    linux-hdi0:/home/newbie # pavucontrol
    XDG_RUNTIME_DIR (/run/user/1000) is not owned by us (uid 0), but by uid 1000! (This could e.g. happen if you try to connect to a non-root PulseAudio as a root user, over the native protocol. Don't do that.)
    
    (pavucontrol:2988): GLib-GIO-CRITICAL **: 15:06:19.121: g_dbus_connection_register_object: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
    
    (pavucontrol:2988): GLib-GIO-CRITICAL **: 15:06:19.122: g_dbus_connection_register_object: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
    
    (pavucontrol:2988): GLib-GIO-CRITICAL **: 15:06:19.122: g_dbus_connection_get_unique_name: assertion 'G_IS_DBUS_CONNECTION (connection)' failed
    XDG_RUNTIME_DIR (/run/user/1000) is not owned by us (uid 0), but by uid 1000! (This could e.g. happen if you try to connect to a non-root PulseAudio as a root user, over the native protocol. Don't do that.)
    Then in the ensuing window I saw the following content within a window entitled “Volume Control”:

    Code:
    Establishing connection to PulseAudio.  Please wait…
    But I did not wait for an infinite time. Instead I closed that window by clicking on the “X” located on its upper-right-hand corner, which returned me to

    Code:
    linux-hdi0:/home/newbie #
    . Beginning as a regular user, except for prompts, I entered:

    Code:
    newbie@linux-hdi0:~> start-pulseaudio-x11
    W: [pulseaudio] core-util.c: Failed to open configuration file '/home/newbie/.config/pulse//daemon.conf': Permission denied
    W: [pulseaudio] daemon-conf.c: Failed to open configuration file: Permission denied
    Connection failure: Connection refused
    pa_context_connect() failed: Connection refused
    newbie@linux-hdi0:~> su
    Password: 
    linux-hdi0:/home/newbie # start-pulseaudio-x11
    XDG_RUNTIME_DIR (/run/user/1000) is not owned by us (uid 0), but by uid 1000! (This could e.g. happen if you try to connect to a non-root PulseAudio as a root user, over the native protocol. Don't do that.)
    Connection failure: Connection refused
    pa_context_connect() failed: Connection refused
    linux-hdi0:/home/newbie #

  2. #22

    Default Re: Please help me obtain sound production in Leap 15.3.

    Attempting something from https://en.opensuse.org/Sound_troubleshooting on the Internet I entered, except for prompts,

    Code:
    newbie@linux-hdi0:~> pulseaudio -D
    W: [pulseaudio] core-util.c: Failed to open configuration file '/home/newbie/.config/pulse//daemon.conf': Permission denied
    W: [pulseaudio] daemon-conf.c: Failed to open configuration file: Permission denied
    newbie@linux-hdi0:~> su
    Password: 
    linux-hdi0:/home/newbie # pulseaudio -D
    W: [pulseaudio] main.c: This program is not intended to be run as root (unless --system is specified).
    E: [pulseaudio] main.c: Daemon startup failed.
    linux-hdi0:/home/newbie #
    . On the Web page https://en.opensuse.org/SDB:Pulseaudio the hyperlink reading “this article” led to https://www.freedesktop.org/wiki/Software/PulseAudio/. The “Documentation” hyperlink on it led to https://www.freedesktop.org/wiki/Sof...Documentation/. The hyperlink on that Web page reading “User Documentation” led to https://www.freedesktop.org/wiki/Sof...entation/User/, which contained two hyperlinks reading “first steps”, which led to https://www.freedesktop.org/wiki/Sof...er/FirstSteps/, and “the perfect setup”, which led to https://www.freedesktop.org/wiki/Sof.../PerfectSetup/. From https://www.freedesktop.org/wiki/Sof...er/FirstSteps/ I began by entering the command, except for prompts,

    Code:
    newbie@linux-hdi0:~> pulseaudio -nC
    W: [pulseaudio] core-util.c: Failed to open configuration file '/home/newbie/.config/pulse//daemon.conf': Permission denied
    W: [pulseaudio] daemon-conf.c: Failed to open configuration file: Permission denied
    newbie@linux-hdi0:~> su
    Password: 
    linux-hdi0:/home/newbie # pulseaudio -nC
    W: [pulseaudio] main.c: This program is not intended to be run as root (unless --system is specified).
    E: [pulseaudio] core-util.c: XDG_RUNTIME_DIR (/run/user/1000) is not owned by us (uid 0), but by uid 1000! (This could e.g. happen if you try to connect to a non-root PulseAudio as a root user, over the native protocol. Don't do that.)
    linux-hdi0:/home/newbie #
    . From https://www.freedesktop.org/wiki/Sof.../PerfectSetup/ I entered, except for prompts,

    Code:
    newbie@linux-hdi0:~> start-pulseaudio-x11 &
    [1] 3307
    newbie@linux-hdi0:~> W: [pulseaudio] core-util.c: Failed to open configuration file '/home/newbie/.config/pulse//daemon.conf': Permission denied
    W: [pulseaudio] daemon-conf.c: Failed to open configuration file: Permission denied
    Connection failure: Connection refused
    pa_context_connect() failed: Connection refused
    ^C
    [1]+  Exit 1                  start-pulseaudio-x11
    newbie@linux-hdi0:~> su
    Password: 
    linux-hdi0:/home/newbie # start-pulseaudio-x11 &
    [1] 3346
    linux-hdi0:/home/newbie # XDG_RUNTIME_DIR (/run/user/1000) is not owned by us (uid 0), but by uid 1000! (This could e.g. happen if you try to connect to a non-root PulseAudio as a root user, over the native protocol. Don't do that.)
    Connection failure: Connection refused
    pa_context_connect() failed: Connection refused
    ^C
    [1]+  Exit 1                  start-pulseaudio-x11
    linux-hdi0:/home/newbie #
    The “^C”s were due to my keyboard entries of “Ctrl” with “C”.

    III. A Concluding Speculation and Some Concluding Thoughts in This Posting Regarding Upgrading Leap Versus Making Installations of Leap From an Effectively Blank Virtual Partition on a Virtual Hard-Disk Drive

    Multiple times I have upgraded from one Leap version to the next one instead of having made so-called “clean” installations of Leap from essentially a blank, virtual, hard-disk-drive partition. I think upgrading is desirable over making a “clean” installation of Leap 1) when there is a large number of “Teχ-Live” software packages of the form texlive-... installed and 2) in order to pass along a well-working version of the Linux kernel from one Leap version to the next one. However, given the statement that “PulseAudio is enabled by default in openSUSE installations” on https://en.opensuse.org/SDB:Pulseaudio, I just guess that if I instead had made a so-called “clean” installation of Leap 15.3 that my chance of being able to produce sound in Leap 15.3 might have been greater than now, especially since I probably did not have sound production in Leap 15.2. Writing clearly, I still do not have sound production in my installation of Leap 15.3.

  3. #23

    Default Re: Please help me obtain sound production in Leap 15.3.

    After some additional thinking I think it is possible that the poster oldcpu in posting number eight in this “thread” of postings might have a Linux, “host” operating system and within it a VirtualBox application, then within VirtualBox an openSUSE, Leap-15.3, Linux “guest” operating system.--That is a possible Linux operating system as his “host” operating system would not have to be a Leap-15.3, openSUSE, Linux operating system; but it might be one. Perhaps the poster oldcpu could reply here as to whether my thinking here concerning his posting in posting number eight in this “thread” of postings is correct or not.

  4. #24
    Join Date
    Jun 2008
    Location
    Auckland, NZ
    Posts
    23,317
    Blog Entries
    1

    Default Re: Please help me obtain sound production in Leap 15.3.

    Quote Originally Posted by 2009Newbie View Post
    Code:
    | python2-pulsectl               | package    | 20.2.4-bp153.2.1                   | noarch | Main Repository
       | python3-django-pipeline        | package    | 2.0.5-bp153.1.21                   | noarch | Main Repository
       | python3-pulsectl               | package    | 20.2.4-bp153.2.1                   | noarch | Main Repository
       | texlive-bagpipe                | package    | 2017.135.3.02svn34393-6.16         | noarch | Main Repository
       | texlive-bagpipe-doc            | package    | 2017.135.3.02svn34393-6.16         | noarch | Main Repository
       | typelib-1_0-GVncPulse-1_0      | package    | 1.0.0-2.35                         | x86_64 | Main Repository
       | xfce4-pulseaudio-plugin        | package    | 0.4.3-bp153.2.1                    | x86_64 | Main Repository
       | xfce4-pulseaudio-plugin        | package    | 0.4.3-bp153.2.1                    | x86_64 | openSUSE-Leap-15.3-1
       | xfce4-pulseaudio-plugin-lang   | package    | 0.4.3-bp153.2.1                    | noarch | Main Repository
       | xfce4-pulseaudio-plugin-lang   | package    | 0.4.3-bp153.2.1                    | noarch | openSUSE-Leap-15.3-1
       | xmms2-plugin-pulse             | package    | 0.8-bp153.1.39                     | x86_64 | Main Repository
    
    For an extended search including not yet activated remote resources you may run
    'zypper search-packages' at any time.
    Do you want to run 'zypper search-packages' now? [yes/no/always/never] (no):yes
    
    Could not parse the options: ambiguous option: -s
    Could not search for the package: SUSE::Connect::UnsupportedOperation: Package search is not supported by the registration proxy: Alternatively, use the web version at https://scc.suse.com/packages/
    Could not search for the package: SUSE::Connect::UnsupportedOperation: Package search is not supported by the registration proxy: Alternatively, use the web version at https://scc.suse.com/packages/
    Could not search for the package: SUSE::Connect::UnsupportedOperation: Package search is not supported by the registration proxy: Alternatively, use the web version at https://scc.suse.com/packages/
    No package found
    
    newbie@linux-hdi0:~>  
    
    newbie@linux-hdi0:~> su
    Password: 
    
    (Here I skipped one failed attempt.)
    
    linux-hdi0:/home/newbie # setup-pulseaudio --enable
    Enabling PulseAudio for ALSA...
    Enabling PulseAudio for libao...
    Default driver is pulse already in /etc/libao.conf
    Enabling PulseAudio for mplayer...
    Enabling PulseAudio for OSS...
    Application aumix already setup for PulseAudio
    Application sox already setup for PulseAudio
    Enabling PulseAudio for SDL...
    Enabling PulseAudio for Timidity...
    Timidity already setup for using PulseAudio
    Enabling PulseAudio for Phonon...
    Enabling PulseAudio for Kmix...
    Enabling PulseAudio for speech dispatcher...
    Enabling PulseAudio for SoX...
    Setting auto sink/src for gstreamer
    Enabling PulseAudio for QEMU/KVM
    Enabling systemd user socket...
    linux-hdi0:/home/newbie #
    Then I “rebooted” my virtual computer in VirtualBox 6.1.22 into Leap 15.3, as usual lately, using the Linux kernel 5.3.18-59.16.1.x86_64-preempt and, except for prompts, entered the following command as a regular user with the ensuing results.

    Code:
    newbie@linux-hdi0:~> systemctl --user list-unit-files | egrep -i 'pipe|pulse'
    pipewire-media-session.service                                                     enabled   enabled      
    pipewire.service                                                                   disabled  disabled     
    pulseaudio.service                                                                 disabled  disabled     
    pipewire.socket                                                                    enabled   enabled      
    pulseaudio.socket                                                                  enabled   enabled      
    newbie@linux-hdi0:~>
    This looks as expected.
    openSUSE Leap 15.3; KDE Plasma 5

  5. #25
    Join Date
    Jun 2008
    Location
    Auckland, NZ
    Posts
    23,317
    Blog Entries
    1

    Default Re: Please help me obtain sound production in Leap 15.3.

    Quote Originally Posted by 2009Newbie View Post

    Being rather ignorant of the matter, I did not try to follow the above advice regarding “--machine=<user>@.host –user”.

    As a “root” user, except for prompts, I entered the following command and obtained the ensuing results.

    Code:
    linux-hdi0:/home/newbie # journalctl -b |grep pulse
    Jul 29 14:22:39 linux-hdi0.site systemd[1987]: pulseaudio.socket: Succeeded.
    Jul 29 14:22:39 linux-hdi0.site pulseaudio[2334]: W: [pulseaudio] core-util.c: Failed to open configuration file '/home/newbie/.config/pulse//daemon.conf': Permission denied
    Jul 29 14:22:39 linux-hdi0.site pulseaudio[2334]: W: [pulseaudio] daemon-conf.c: Failed to open configuration file: Permission denied
    Jul 29 14:22:39 linux-hdi0.site systemd[2047]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
    Jul 29 14:22:39 linux-hdi0.site systemd[2047]: pulseaudio.service: Failed with result 'exit-code'.
    Jul 29 14:22:39 linux-hdi0.site systemd[2047]: pulseaudio.service: Scheduled restart job, restart counter is at 1.
    Jul 29 14:22:39 linux-hdi0.site pulseaudio[2381]: W: [pulseaudio] core-util.c: Failed to open configuration file '/home/newbie/.config/pulse//daemon.conf': Permission denied
    Jul 29 14:22:39 linux-hdi0.site pulseaudio[2381]: W: [pulseaudio] daemon-conf.c: Failed to open configuration file: Permission denied
    Jul 29 14:22:39 linux-hdi0.site systemd[2047]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
    Jul 29 14:22:39 linux-hdi0.site systemd[2047]: pulseaudio.service: Failed with result 'exit-code'.
    Jul 29 14:22:39 linux-hdi0.site systemd[2047]: pulseaudio.service: Scheduled restart job, restart counter is at 2.
    Jul 29 14:22:40 linux-hdi0.site pulseaudio[2383]: W: [pulseaudio] core-util.c: Failed to open configuration file '/home/newbie/.config/pulse//daemon.conf': Permission denied
    Jul 29 14:22:40 linux-hdi0.site pulseaudio[2383]: W: [pulseaudio] daemon-conf.c: Failed to open configuration file: Permission denied
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.service: Failed with result 'exit-code'.
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.service: Scheduled restart job, restart counter is at 3.
    Jul 29 14:22:40 linux-hdi0.site pulseaudio[2393]: W: [pulseaudio] core-util.c: Failed to open configuration file '/home/newbie/.config/pulse//daemon.conf': Permission denied
    Jul 29 14:22:40 linux-hdi0.site pulseaudio[2393]: W: [pulseaudio] daemon-conf.c: Failed to open configuration file: Permission denied
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.service: Failed with result 'exit-code'.
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.service: Scheduled restart job, restart counter is at 4.
    Jul 29 14:22:40 linux-hdi0.site pulseaudio[2398]: W: [pulseaudio] core-util.c: Failed to open configuration file '/home/newbie/.config/pulse//daemon.conf': Permission denied
    Jul 29 14:22:40 linux-hdi0.site pulseaudio[2398]: W: [pulseaudio] daemon-conf.c: Failed to open configuration file: Permission denied
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.service: Main process exited, code=exited, status=1/FAILURE
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.service: Failed with result 'exit-code'.
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.service: Scheduled restart job, restart counter is at 5.
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.service: Start request repeated too quickly.
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.service: Failed with result 'exit-code'.
    Jul 29 14:22:40 linux-hdi0.site systemd[2047]: pulseaudio.socket: Failed with result 'service-start-limit-hit'.
    linux-hdi0:/home/newbie #
    The journalling output shows a problem with permissions. Please show output of
    Code:
    ps aux | grep pulse
    Except for prompts, I entered the following command and obtained the ensuing result:

    Code:
    newbie@linux-hdi0:~> su
    Password: 
    linux-hdi0:/home/newbie # pavucontrol
    XDG_RUNTIME_DIR (/run/user/1000) is not owned by us (uid 0), but by uid 1000! (This could e.g. happen if you try to connect to a non-root PulseAudio as a root user, over the native protocol. Don't do that.)
    No, you don't run this as root!
    openSUSE Leap 15.3; KDE Plasma 5

  6. #26
    Join Date
    Jun 2008
    Location
    Auckland, NZ
    Posts
    23,317
    Blog Entries
    1

    Default Re: Please help me obtain sound production in Leap 15.3.

    Also (as regular user newbie)...
    Code:
    ls -laR ~/.config/pulse/
    openSUSE Leap 15.3; KDE Plasma 5

  7. #27
    Join Date
    Mar 2008
    Location
    Phuket, Thailand
    Posts
    26,858
    Blog Entries
    39

    Default Re: Please help me obtain sound production in Leap 15.3.

    Quote Originally Posted by 2009Newbie View Post
    After some additional thinking I think it is possible that the poster oldcpu in posting number eight in this “thread” of postings might have a Linux, “host” operating system and within it a VirtualBox application, then within VirtualBox an openSUSE, Leap-15.3, Linux “guest” operating system.--That is a possible Linux operating system as his “host” operating system would not have to be a Leap-15.3, openSUSE, Linux operating system; but it might be one. Perhaps the poster oldcpu could reply here as to whether my thinking here concerning his posting in posting number eight in this “thread” of postings is correct or not.
    Yes, in post#11 I stated that my Host is openSUSE-15.2, and that I have as a 'guest' openSUSE-15.3. Further I suggested that deano_ferrari likely has a closer configuration to what you have (in Virtual Box guest/host) than what I have.

    I would not expect to see "pulse" as an option to select under VirtualBox configuration in an MS-Windows-HOST, as to the best of my knowledge, 'pulse' does not run directly under MS-Windows. But pulse should 'run' in a GNU/Linux guest in Virtual Box, all hosted by MS-windows.

Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •