Page 1 of 6 123 ... LastLast
Results 1 to 10 of 53

Thread: New Installation Display Configuration and Resolution Problem

  1. #1
    Join Date
    Nov 2008
    Posts
    1,958
    Blog Entries
    1

    Default New Installation Display Configuration and Resolution Problem

    Having managed to install Leap 15.3 on my spare server I am trying to improve my display experience, Instead of using a Matrox card which I had used to date I wished to try and get the on-board display working so that the scroll bar is visible and I can see more than a few lines.

    The display now working is shown as Device-2 in the system description here:-

    Code:
    alastair@localhost:~> inxi -Fmxxz
    System:
      Kernel: 5.3.18-59.10-default x86_64 bits: 64 compiler: gcc v: 7.5.0 
      Desktop: KDE Plasma 5.18.6 tk: Qt 5.12.7 wm: kwin_x11 dm: SDDM 
      Distro: openSUSE Leap 15.3 
    Machine:
      Type: Server System: IBM product: IBM System x3400 M3 Server -[7379ZY7]- v: 09 
      serial: <filter> 
      Mobo: IBM model: 69Y4356 v: RF3 serial: <filter> UEFI: IBM v: -[Y4E160AUS-1.15]- 
      date: 07/31/2013 
    Memory:
      RAM: total: 15.64 GiB used: 1.33 GiB (8.5%) 
      RAM Report: permissions: Unable to run dmidecode. Root privileges required. 
    CPU:
      Topology: 2x Quad Core model: Intel Xeon E5606 bits: 64 type: MCP SMP 
      arch: Nehalem rev: 2 L2 cache: 16.0 MiB 
      flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 34131 
      Speed: 1200 MHz min/max: 1197/2128 MHz Core speeds (MHz): 1: 1200 2: 1200 3: 1200 
      4: 1200 5: 1200 6: 1200 7: 1200 8: 1200 
    Graphics:
      Device-1: Matrox Systems MGA G200EV vendor: IBM driver: mgag200 v: kernel 
      bus ID: 07:00.0 chip ID: 102b:0530 
      Device-2: AMD Caicos [Radeon HD 6450/7450/8450 / R5 230 OEM] 
      vendor: PC Partner Limited driver: radeon v: kernel bus ID: 15:00.0 
      chip ID: 1002:6779 
      Display: x11 server: X.org 1.20.3 compositor: kwin_x11 
      driver: ati,modesetting,radeon FAILED: mga unloaded: fbdev,vesa 
      resolution: <xdpyinfo missing> 
      OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.2.4 compat-v: 3.1 
      direct render: Yes 
    Audio:
      Device-1: HDA ATI HDMI driver: HDA-Intel message: bus/chip ids unavailable 
      Sound Server: ALSA v: k5.3.18-59.10-default 
    Network:
      Device-1: Broadcom and subsidiaries NetXtreme II BCM5716 Gigabit Ethernet 
      vendor: IBM driver: bnx2 v: 2.2.6 port: 30c0 bus ID: 0b:00.0 chip ID: 14e4:163b 
      IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
      Device-2: Broadcom and subsidiaries NetXtreme II BCM5716 Gigabit Ethernet 
      vendor: IBM driver: bnx2 v: 2.2.6 port: 30c0 bus ID: 0b:00.1 chip ID: 14e4:163b 
      IF: eth1 state: down mac: <filter> 
      Device-3: IBM RNDIS/CDC ETHER type: USB driver: cdc_ether bus ID: 2-2:2 
      chip ID: 04b3:4010 
      IF: usb0 state: unknown speed: N/A duplex: N/A mac: <filter> 
    Drives:
      Local Storage: total: 2.73 TiB used: 666.43 GiB (23.9%) 
      ID-1: /dev/sda model: ServeRAID M5014 size: 2.73 TiB speed: 1.5 Gb/s serial: N/A 
    RAID:
      Hardware-1: Broadcom / LSI MegaRAID SAS 2108 [Liberator] driver: megaraid_sas 
      v: 07.714.04.00-rc1 bus ID: 24:00.0 chip ID: 1000.0079 
    Partition:
      ID-1: / size: 2.72 TiB used: 6.24 GiB (0.2%) fs: btrfs dev: /dev/sda2 
      ID-2: /home size: 2.72 TiB used: 6.24 GiB (0.2%) fs: btrfs dev: /dev/sda2 
      ID-3: /opt size: 2.72 TiB used: 6.24 GiB (0.2%) fs: btrfs dev: /dev/sda2 
      ID-4: /tmp size: 2.72 TiB used: 6.24 GiB (0.2%) fs: btrfs dev: /dev/sda2 
      ID-5: /var size: 2.72 TiB used: 6.24 GiB (0.2%) fs: btrfs dev: /dev/sda2 
    Swap:
      ID-1: swap-1 type: partition size: 2.00 GiB used: 0 KiB (0.0%) priority: -2 
      dev: /dev/sda3 
    Sensors:
      System Temperatures: cpu: 31.0 C mobo: N/A gpu: radeon temp: 41 C 
      Fan Speeds (RPM): N/A 
    Info:
      Processes: 246 Uptime: 1h 04m Init: systemd v: 246 runlevel: 5 
      target: graphical.target Compilers: gcc: N/A Shell: bash v: 4.4.23 
      running in: konsole inxi: 3.1.00 
    alastair@localhost:~>
    I am using the wide screen I had to move when trying to bring this system up to date. This gave me as I recall 1280x1024 but the best I can get using the display settings on the present display adaptor is 1024 x 768 and it looks dreadful. Is there anything I can do to improve this? I recall there were some fixes I was able to use a while ago but cannot recall.

  2. #2
    Join Date
    Jul 2018
    Location
    Loma Linda, Mo
    Posts
    568

    Default Re: New Installation Display Configuration and Resolution Problem

    you can use cvt and xrandr to set other video sizes this is how I set 1920x1080 and get the name of the video adapter I want to attach it to.
    I know mine is the first adapter so I just need the first two lines - you may need more.
    xrandr can set any resolution that the chipset on the board can handle.

    Code:
    llr@VM1:~> cvt 1920 1080
    # 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz
    Modeline "1920x1080_60.00"  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync
    llr@VM1:~>xrandr --verbose | head -2 
    Screen 0: minimum 1 x 1, current 1280 x 1024, maximum 8192 x 8192
    Virtual1 connected primary 1752x980+0+0 (0x542) normal (normal left inverted right x axis y axis) 0mm x 0mm
    llr@VM1:~> xrandr --newmode "1920x1080_60.00"  173.00  1920 2048 2248 2576  1080 1083 1088 1120 -hsync +vsync
    llr@VM1:~> xrandr --addmode Screen 0 1920x1080_60.00
    llr@VM1:~> xrandr -s 1920x1080
    OpenSUSE 15.3 with VirtualBox VM's (XP, 10, Ubuntu MATE 20.04, OpenSUSE 15.3, Tumbleweed)
    Pi4 with Ubuntu MATE 20.04
    Unix since 1974 (pdp-11, Interdata, AT&T, Tandy, Convergent, Sun, IBM, NCR, and HP)
    Linux since 1995 (Mandrake, Fedora, CentOS, OpenSUSE)

  3. #3
    Join Date
    Dec 2008
    Location
    FL, USA
    Posts
    3,023
    Blog Entries
    1

    Default Re: New Installation Display Configuration and Resolution Problem

    AMD Caicos works perfectly fine for me automagically:
    Code:
    # inxi -GISay
    System:
      Host: gx78b Kernel: 5.3.18-59.10-default x86_64 bits: 64 compiler: gcc
      v: 7.5.0
      parameters:...
      Desktop: KDE Plasma 5.18.6 tk: Qt 5.12.7 wm: kwin_x11 vt: 7
      dm: LightDM 1.30.0 Distro: openSUSE Leap 15.3
    Graphics:
      Device-1: AMD Caicos [Radeon HD 6450/7450/8450 / R5 230 OEM] vendor: Dell
      driver: radeon v: kernel bus-ID: 01:00.0 chip-ID: 1002:6779 class-ID: 0300
      Display: x11 server: X.Org 1.20.3 compositor: kwin_x11 driver: loaded: modesetting
      unloaded: fbdev,vesa alternate: ati display-ID: :0
      screens: 1
      Screen-1: 0 s-res: 1920x1200 s-dpi: 120 s-size: 406x254mm (16.0x10.0")
      s-diag: 479mm (18.9")
      Monitor-1: DVI-I-1 res: 1920x1200 hz: 60 dpi: 94
      size: 519x324mm (20.4x12.8") diag: 612mm (24.1")
      OpenGL: renderer: AMD CAICOS (DRM 2.50.0 / 5.3.18-59.10-default LLVM 11.0.1)
      v: 3.3 Mesa 20.2.4 compat-v: 3.1 direct render: Yes
    Info:...Shell: Bash v: 4.4.23 running-in: konsole inxi: 3.3.05
    Are there configuration leftovers from your Matrox interfering with AMD's drivers? What does inxi -Gaz report run from Konsole?
    Reg. Linux User #211409 *** multibooting since 1992
    Primary: 15.2, +TW, 15.3, 15.1 & 13.1 on Haswell
    Secondary: eComStation (OS/2) &15.2 on i965P w/ Radeon
    Tertiary: Mageia,Fedora,Debian,more on Kaby Lake,iQ45,iQ43,iG41,iG3X,i965G,AMD,NVidia&&&&&

  4. #4
    Join Date
    Dec 2008
    Location
    FL, USA
    Posts
    3,023
    Blog Entries
    1

    Default Re: New Installation Display Configuration and Resolution Problem

    You can probably make the Matrox behave adequately via appropriate manual configuration:
    https://bugzilla.opensuse.org/show_b...?id=1175754#c1
    I have various old Matrox cards working on 32bit Tumbleweed, but no G200* do I have.
    Reg. Linux User #211409 *** multibooting since 1992
    Primary: 15.2, +TW, 15.3, 15.1 & 13.1 on Haswell
    Secondary: eComStation (OS/2) &15.2 on i965P w/ Radeon
    Tertiary: Mageia,Fedora,Debian,more on Kaby Lake,iQ45,iQ43,iG41,iG3X,i965G,AMD,NVidia&&&&&

  5. #5
    Join Date
    Nov 2008
    Posts
    1,958
    Blog Entries
    1

    Default Re: New Installation Display Configuration and Resolution Problem

    Hi all and many thanks for the suggestions. Machine in pieces at present while I upgrade the Xeons. If all goes well I should be able to try it in a day or so.
    Will report progress.
    Thanks again,
    Budge.

  6. #6
    Join Date
    Nov 2008
    Posts
    1,958
    Blog Entries
    1

    Default Re: New Installation Display Configuration and Resolution Problem

    OK I have it up again and here is the result your suggestion:-

    Code:
    alastair@localhost:~> inxi -Gaz
    Graphics:
      Device-1: Matrox Systems MGA G200EV vendor: IBM driver: mgag200 v: kernel 
      bus ID: 07:00.0 chip ID: 102b:0530 
      Device-2: AMD Caicos [Radeon HD 6450/7450/8450 / R5 230 OEM] 
      vendor: PC Partner Limited driver: radeon v: kernel bus ID: 15:00.0 
      chip ID: 1002:6779 
      Display: x11 server: X.org 1.20.3 compositor: kwin_x11 
      driver: ati,modesetting,radeon FAILED: mga unloaded: fbdev,vesa 
      resolution: <xdpyinfo missing> 
      OpenGL: renderer: llvmpipe (LLVM 11.0.1 128 bits) v: 4.5 Mesa 20.2.4 compat-v: 3.1 
      direct render: Yes 
    alastair@localhost:~>
    Clearly the Caicos is not working as expected. Is it a driver issue?

    I could pull the Matrox but I had an ambition to be able to switch between the two. At present the BIOS is set for the on-board Caicos machine and I would like to get this working correctly. What is my first step please?
    Budge.

  7. #7
    Join Date
    Dec 2008
    Location
    FL, USA
    Posts
    3,023
    Blog Entries
    1

    Default Re: New Installation Display Configuration and Resolution Problem

    Leap's inxi is broken WRT your graphics combination, so needs an update, either by upgrading to TW's more recent, less broken version, or upgrading to the day old upstream latest version
    Code:
    sudo inxi -I
    then to be run in Konsole again as
    Code:
    sudo zypper in xdpyinfo
    zypper rm xorg-x11-driver-video xf86-video-ati
    inxi -SGay
    and we need to see your X log:
    Code:
    cat /var/log/Xorg.0.log | susepaste -e 40320
    I've been seeing a disappointing number of failures in recent months by users of old ATI GPUs. I'm CC'd on these reported issues:They, along with various mailing list and forum posts here and elsewhere make me wonder what bugs haven't been found and reported. So, yes, it could be a driver issue, but given mine works, I think something else is wrong, likely related to KMS's impact on the Matrox, and how it needs to be setup. The load shadow configuration from https://bugzilla.opensuse.org/show_bug.cgi?id=1175754 might be needed.
    Reg. Linux User #211409 *** multibooting since 1992
    Primary: 15.2, +TW, 15.3, 15.1 & 13.1 on Haswell
    Secondary: eComStation (OS/2) &15.2 on i965P w/ Radeon
    Tertiary: Mageia,Fedora,Debian,more on Kaby Lake,iQ45,iQ43,iG41,iG3X,i965G,AMD,NVidia&&&&&

  8. #8
    Join Date
    Nov 2008
    Posts
    1,958
    Blog Entries
    1

    Default Re: New Installation Display Configuration and Resolution Problem

    Well that was fun. After your second command my system told me to install a couple of files so I followed these instructions, logged out and started again. The result I have is below:-

    Code:
    alastair@localhost:~> sudo inxi -SGay
    [sudo] password for root: 
    Error 10: Unsupported value: 0 for option: y
    Check -h for correct parameters.
    alastair@localhost:~> sudo inxi -I
    Info:
      Processes: 394 Uptime: 8h 26m Memory: 39.26 GiB used: 1.30 GiB (3.3%) 
      Init: systemd runlevel: 5 Shell: bash inxi: 3.1.00 
    alastair@localhost:~> sudo zypper in xdpyinfo
    Retrieving repository 'SUSE:SLE-15-SP1:Update' metadata .........................[error]
    Repository 'SUSE:SLE-15-SP1:Update' is invalid.
    [https-download.opensuse.org-0677fdea|https://download.opensuse.org/repositories/SUSE:/SLE-15-SP1:/Update/pool-leap-15.3/] Valid metadata not found at specified URL
    History:
     - [https-download.opensuse.org-0677fdea|https://download.opensuse.org/repositories/SUSE:/SLE-15-SP1:/Update/pool-leap-15.3/] Repository type can't be determined.
    
    Please check if the URIs defined for this repository are pointing to a valid repository.
    Warning: Skipping repository 'SUSE:SLE-15-SP1:Update' because of the above error.
    Retrieving repository 'SUSE:SLE-15-SP1:GA' metadata .............................[error]
    Repository 'SUSE:SLE-15-SP1:GA' is invalid.
    [https-download.opensuse.org-3435cf18|https://download.opensuse.org/repositories/SUSE:/SLE-15-SP1:/GA/pool/] Valid metadata not found at specified URL
    History:
     - [https-download.opensuse.org-3435cf18|https://download.opensuse.org/repositories/SUSE:/SLE-15-SP1:/GA/pool/] Repository type can't be determined.
    
    Please check if the URIs defined for this repository are pointing to a valid repository.
    Warning: Skipping repository 'SUSE:SLE-15-SP1:GA' because of the above error.
    Retrieving repository 'SUSE:SLE-15-SP2:GA' metadata .............................[error]
    Repository 'SUSE:SLE-15-SP2:GA' is invalid.
    [https-download.opensuse.org-54a8c274|https://download.opensuse.org/repositories/SUSE:/SLE-15-SP2:/GA/pool/] Valid metadata not found at specified URL
    History:
     - [https-download.opensuse.org-54a8c274|https://download.opensuse.org/repositories/SUSE:/SLE-15-SP2:/GA/pool/] Repository type can't be determined.
    
    Please check if the URIs defined for this repository are pointing to a valid repository.
    Warning: Skipping repository 'SUSE:SLE-15-SP2:GA' because of the above error.
    Retrieving repository 'SUSE:SLE-15:Update' metadata .............................[error]
    Repository 'SUSE:SLE-15:Update' is invalid.
    [https-download.opensuse.org-72cbb05e|https://download.opensuse.org/repositories/SUSE:/SLE-15:/Update/pool-leap-15.3/] Valid metadata not found at specified URL
    History:
     - [https-download.opensuse.org-72cbb05e|https://download.opensuse.org/repositories/SUSE:/SLE-15:/Update/pool-leap-15.3/] Repository type can't be determined.
    
    Please check if the URIs defined for this repository are pointing to a valid repository.
    Warning: Skipping repository 'SUSE:SLE-15:Update' because of the above error.
    Retrieving repository 'SUSE:SLE-15-SP1:GA' metadata .............................[error]
    Repository 'SUSE:SLE-15-SP1:GA' is invalid.
    [https-download.opensuse.org-9f022706|https://download.opensuse.org/repositories/SUSE:/SLE-15-SP1:/GA/pool/] Valid metadata not found at specified URL
    History:
     - [https-download.opensuse.org-9f022706|https://download.opensuse.org/repositories/SUSE:/SLE-15-SP1:/GA/pool/] Repository type can't be determined.
    
    Please check if the URIs defined for this repository are pointing to a valid repository.
    Warning: Skipping repository 'SUSE:SLE-15-SP1:GA' because of the above error.
    Retrieving repository 'SUSE:SLE-15-SP3:GA' metadata .............................[error]
    Repository 'SUSE:SLE-15-SP3:GA' is invalid.
    [https-download.opensuse.org-a02ed9b1|https://download.opensuse.org/repositories/SUSE:/SLE-15-SP3:/GA/pool/] Valid metadata not found at specified URL
    History:
     - [https-download.opensuse.org-a02ed9b1|https://download.opensuse.org/repositories/SUSE:/SLE-15-SP3:/GA/pool/] Repository type can't be determined.
    
    Please check if the URIs defined for this repository are pointing to a valid repository.
    Warning: Skipping repository 'SUSE:SLE-15-SP3:GA' because of the above error.
    Retrieving repository 'SUSE:SLE-15-SP2:Update' metadata .........................[error]
    Repository 'SUSE:SLE-15-SP2:Update' is invalid.
    [https-download.opensuse.org-ba5621ad|https://download.opensuse.org/repositories/SUSE:/SLE-15-SP2:/Update/pool-leap-15.3/] Valid metadata not found at specified URL
    History:
     - [https-download.opensuse.org-ba5621ad|https://download.opensuse.org/repositories/SUSE:/SLE-15-SP2:/Update/pool-leap-15.3/] Repository type can't be determined.
    
    Please check if the URIs defined for this repository are pointing to a valid repository.
    Warning: Skipping repository 'SUSE:SLE-15-SP2:Update' because of the above error.
    Some of the repositories have not been refreshed because of an error.
    Loading repository data...
    Warning: Repository 'openSUSE:Backports:SLE-15-SP3' appears to be outdated. Consider using a different mirror or server.
    Reading installed packages...
    'xdpyinfo' is already installed.
    No update candidate for 'xdpyinfo-1.3.2-1.24.x86_64'. The highest available version is already installed.
    Resolving package dependencies...
    Nothing to do.
    alastair@localhost:~> inxi -SGay
    Error 10: Unsupported value: 0 for option: y
    Check -h for correct parameters.
    alastair@localhost:~>
    alastair@localhost:~> cat /var/log/Xorg.0.log | susepaste -e 40320
    Pasted as:
    https://susepaste.org/42804454
    https://paste.opensuse.org/42804454
    Link is also in your clipboard.

    I hope this will help.

  9. #9
    Join Date
    Nov 2008
    Posts
    1,958
    Blog Entries
    1

    Default Re: New Installation Display Configuration and Resolution Problem

    While waiting I have tried a couple of changes. First I upgraded to TW. Apart from some repo failures on a couple of files I have been able to boot into TW without any issues but no change to the display resolution.
    I then tried switching to the Matrox card. This gives me a result which suggests your earlier comment that the two systems are being confused. Here is the output I have now:-

    Code:
    alastair@localhost:~> inxi -GISay
    System:
      Host: localhost.localdomain Kernel: 5.13.0-1-default x86_64 bits: 64 
      compiler: gcc v: 11.1.1 
      parameters: BOOT_IMAGE=/boot/vmlinuz-5.13.0-1-default 
      root=UUID=c7ca635f-1e18-43d4-9be7-f56fb03d1e82 splash=silent quiet 
      mitigations=auto 
      Desktop: KDE Plasma 5.22.3 tk: Qt 5.15.2 wm: kwin_x11 vt: 7 dm: SDDM 
      Distro: openSUSE Tumbleweed 20210711 
    Graphics:
      Device-1: AMD Caicos [Radeon HD 6450/7450/8450 / R5 230 OEM] 
      vendor: PC Partner Limited driver: radeon v: kernel bus-ID: 15:00.0 
      chip-ID: 1002:6779 class-ID: 0300 
      Display: x11 server: X.Org 1.20.11 compositor: kwin_x11 driver: 
      loaded: ati,radeon unloaded: fbdev,modesetting,vesa display-ID: :0 
      screens: 1 
      Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 270x203mm (10.6x8.0") 
      s-diag: 338mm (13.3") 
      Monitor-1: VGA-0 res: 1024x768 hz: 60 
      OpenGL: renderer: AMD CAICOS (DRM 2.50.0 / 5.13.0-1-default LLVM 12.0.0) 
      v: 3.3 Mesa 21.1.4 compat-v: 3.1 direct render: Yes 
    Info:
      Processes: 400 Uptime: N/A wakeups: 0 Memory: 39.25 GiB used: 1.3 GiB (3.3%) 
      Init: systemd v: 248 runlevel: 5 target: graphical.target tool: systemctl 
      Compilers: gcc: N/A Packages: rpm: 2400 lib: 1061 flatpak: 0 Shell: Bash 
      v: 5.1.8 running-in: konsole inxi: 3.3.03 
    alastair@localhost:~>
    This is the result with display plugged into the Matrox card!!!
    Now how do I sort this out? If you want me to change anything please let me know but meanwhile I shall stay with TW as this is what I have been using on my main machine.

    Regards,
    Budge

  10. #10
    Join Date
    Nov 2008
    Posts
    1,958
    Blog Entries
    1

    Default Re: New Installation Display Configuration and Resolution Problem

    In order to try and sort this I removed the graphics card which I remember as a Matrox card. Without the card in the machine my display is still showing:-

    Code:
    alastair@localhost:~> inxi -GISay
    System:
      Host: localhost.localdomain Kernel: 5.13.0-1-default x86_64 bits: 64 
      compiler: gcc v: 11.1.1 
      parameters: BOOT_IMAGE=/boot/vmlinuz-5.13.0-1-default 
      root=UUID=c7ca635f-1e18-43d4-9be7-f56fb03d1e82 splash=silent quiet 
      mitigations=auto 
      Desktop: KDE Plasma 5.22.3 tk: Qt 5.15.2 wm: kwin_x11 vt: 7 dm: SDDM 
      Distro: openSUSE Tumbleweed 20210712 
    Graphics:
      Device-1: Matrox Systems MGA G200EV vendor: IBM driver: mgag200 v: kernel 
      bus-ID: 07:00.0 chip-ID: 102b:0530 class-ID: 0300 
      Display: x11 server: X.Org 1.20.11 compositor: kwin_x11 driver: 
      loaded: modesetting unloaded: fbdev,vesa failed: mga display-ID: :0 
      screens: 1 
      Screen-1: 0 s-res: 1024x768 s-dpi: 96 s-size: 270x203mm (10.6x8.0") 
      s-diag: 338mm (13.3") 
      Monitor-1: VGA-1 res: 1024x768 hz: 60 
      OpenGL: renderer: llvmpipe (LLVM 12.0.0 128 bits) v: 4.5 Mesa 21.1.4 
      compat-v: 3.1 direct render: Yes 
    Info:
      Processes: 371 Uptime: N/A wakeups: 0 Memory: 39.25 GiB 
      used: 1.74 GiB (4.4%) Init: systemd v: 248 runlevel: 5 
      target: graphical.target tool: systemctl Compilers: gcc: N/A Packages: 
      rpm: 2399 lib: 1061 flatpak: 0 Shell: Bash v: 5.1.8 running-in: konsole 
      inxi: 3.3.03 
    alastair@localhost:~>
    Has me beaten.

    During the process of upgrading from Leap 15.3 to TW I had a couple of errors. Running zypper dup enabled me to fix the missing files but strangely I had a new message when the kernel was changed that secure boot is not supported. Does that mean it is supported on Leap 15.3 and not on TW?

    Grateful for help please.

    Unfortunately I have only the one screen until new screen arrives or I could copy the grub settings from the original machine which is working but inaccessible at present.

Page 1 of 6 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •