Page 1 of 14 12311 ... LastLast
Results 1 to 10 of 134

Thread: Boot is very slow until login Screen

  1. #1
    Join Date
    Dec 2020
    Location
    France
    Posts
    72

    Default Boot is very slow until login Screen

    Hello to all,

    I have done an fresh install of Leap 15.3 over the existing one (15.2) formatting the linux BTRFS partition sda2. I did not do anything regarding Swap partition (sda3).
    The install is good and the system is running fine.
    But each time I boot, it take a long time from grub menu to login screen (around 2mn).

    Here is blkid:


    Code:
    localhost:/ # blkid
    /dev/sda2: LABEL="linux" UUID="194095e6-6c9b-4828-8ee1-d42527325bf8" UUID_SUB="1d7ea7d6-33ce-43f3-b84f-fbdbff44d227" BLOCK_SIZE="4096" TYPE="btrfs" PARTUUID="005db999-7b44-4438-84b8-4d6ad997fc70"
    /dev/sda3: UUID="7a298333-7aad-4c7e-855f-2277d711a115" TYPE="swap" PARTUUID="8f306e7f-c49f-4d3a-bd00-11aa5d0219df"
    /dev/sda4: UUID="889cae00-bc2d-4690-a7c3-165761e92ed8" UUID_SUB="82f51373-afe1-4708-89d1-2e90d2e043cd" BLOCK_SIZE="4096" TYPE="btrfs" PARTUUID="b66c21df-46d7-448c-8c0e-a304b713b850"
    /dev/sda5: LABEL="Backup" UUID="2a8e4fdd-def5-4086-b5d6-ca66ef87310d" BLOCK_SIZE="512" TYPE="xfs" PARTUUID="caa8019d-1f80-457c-b0dd-af27d0082490"
    /dev/sda1: PARTUUID="9db9ce7c-5e5a-46c5-ba69-aa11b3d3f3bd"
    mi fstab:
    Code:
    UUID=194095e6-6c9b-4828-8ee1-d42527325bf8  /                       btrfs  defaults                      0  0
    UUID=194095e6-6c9b-4828-8ee1-d42527325bf8  /var                    btrfs  subvol=/@/var                 0  0
    UUID=194095e6-6c9b-4828-8ee1-d42527325bf8  /usr/local              btrfs  subvol=/@/usr/local           0  0
    UUID=194095e6-6c9b-4828-8ee1-d42527325bf8  /tmp                    btrfs  subvol=/@/tmp                 0  0
    UUID=194095e6-6c9b-4828-8ee1-d42527325bf8  /srv                    btrfs  subvol=/@/srv                 0  0
    UUID=194095e6-6c9b-4828-8ee1-d42527325bf8  /root                   btrfs  subvol=/@/root                0  0
    UUID=194095e6-6c9b-4828-8ee1-d42527325bf8  /opt                    btrfs  subvol=/@/opt                 0  0
    UUID=194095e6-6c9b-4828-8ee1-d42527325bf8  /home                   btrfs  subvol=/@/home                0  0
    UUID=194095e6-6c9b-4828-8ee1-d42527325bf8  /boot/grub2/x86_64-efi  btrfs  subvol=/@/boot/grub2/x86_64-efi  0  0
    UUID=194095e6-6c9b-4828-8ee1-d42527325bf8  /boot/grub2/i386-pc     btrfs  subvol=/@/boot/grub2/i386-pc  0  0
    UUID=194095e6-6c9b-4828-8ee1-d42527325bf8  /.snapshots             btrfs  subvol=/@/.snapshots          0  0

    and kernel parameter in bootloader
    splash=silent resume=/dev/disk/by-uuid/7a298333-7aad-4c7e-855f-2277d711a115 quiet

    Is there something wrong with mi configuration?

    Thanks in advance

  2. #2
    Join Date
    Jun 2008
    Location
    Auckland, NZ
    Posts
    23,104
    Blog Entries
    1

    Default Re: Boot is very slow until login Screen

    Analyse the boot-up performance with...
    Code:
    sudo systemd-analyze blame
    Code:
    sudo systemd-analyze critical-chain
    Report back here with the output, so that others can advise further.
    openSUSE Leap 15.2; KDE Plasma 5

  3. #3
    Join Date
    Jun 2008
    Location
    Netherlands
    Posts
    28,899

    Default Re: Boot is very slow until login Screen

    And please include the command you gave within the CODE section. Not saying things like "Here is blkid", but we want seed what you did within the CODE.
    Henk van Velden

  4. #4
    Join Date
    Dec 2020
    Location
    France
    Posts
    72

    Default Re: Boot is very slow until login Screen

    That's the commands:

    Code:
    cb@localhost:/> sudo systemd-analyze blame
    [sudo] Mot de passe de root : 
    4.322s apparmor.service                                   
    3.310s display-manager.service                            
    3.270s dracut-initqueue.service                           
    2.885s plymouth-quit-wait.service                         
    1.891s postfix.service                                    
    1.380s systemd-udevd.service                              
    1.290s firewalld.service                                  
    1.263s systemd-journald.service                           
    1.122s systemd-logind.service                             
     891ms kbdsettings.service                                
     837ms initrd-switch-root.service                         
     750ms upower.service                                     
     432ms plymouth-switch-root.service                       
     423ms dracut-cmdline.service                             
     408ms systemd-udev-trigger.service                       
     398ms polkit.service                                     
     325ms initrd-parse-etc.service                           
     303ms user@1000.service                                  
     301ms issue-generator.service                            
     292ms smartd.service                                     
     253ms ModemManager.service                               
     250ms rsyslog.service                                    
     200ms avahi-daemon.service                               
     198ms systemd-backlight@backlight:acpi_video0.service    
     170ms systemd-rfkill.service                             
     168ms auditd.service                                     
     163ms klog.service                                       
     148ms udisks2.service                                    
     137ms chronyd.service                                    
     128ms systemd-vconsole-setup.service                     
     127ms dracut-pre-udev.service                            
     123ms mcelog.service                                     
     116ms systemd-sysctl.service                             
     115ms plymouth-start.service                             
     108ms systemd-backlight@leds:dell::kbd_backlight.service 
     107ms nscd.service                                       
     102ms systemd-backlight@backlight:intel_backlight.service
      98ms NetworkManager.service                             
      90ms \x2esnapshots.mount                                
      89ms boot-grub2-i386\x2dpc.mount                        
      87ms boot-grub2-x86_64\x2defi.mount                     
      85ms home.mount                                         
      84ms systemd-modules-load.service                       
      84ms modprobe@fuse.service                              
      84ms opt.mount                                          
      84ms systemd-remount-fs.service                         
      82ms root.mount                                         
      75ms systemd-random-seed.service                        
      63ms alsa-restore.service                               
      58ms systemd-tmpfiles-setup.service                     
      57ms srv.mount                                          
      57ms var.mount                                          
      56ms tmp.mount                                          
      54ms usr-local.mount                                    
      48ms systemd-tmpfiles-setup-dev.service                 
      48ms initrd-cleanup.service                             
      44ms modprobe@configfs.service                          
      41ms systemd-tmpfiles-clean.service                     
      41ms systemd-journal-flush.service                      
      40ms plymouth-read-write.service                        
      39ms systemd-user-sessions.service                      
      38ms bluetooth.service                                  
      37ms dev-sda3.swap                                      
      37ms dev-hugepages.mount                                
      36ms user-runtime-dir@1000.service                      
      36ms dev-mqueue.mount                                   
      34ms sys-kernel-debug.mount                             
      33ms sysroot.mount                                      
      32ms sys-kernel-tracing.mount                           
      31ms wpa_supplicant.service                             
      31ms systemd-fsck-root.service                          
      30ms kmod-static-nodes.service                          
      29ms dracut-shutdown.service                            
      27ms rtkit-daemon.service                               
      27ms modprobe@drm.service                               
      26ms sound-extra.service                                
      24ms systemd-update-utmp.service                        
      15ms systemd-update-utmp-runlevel.service               
      14ms sys-kernel-config.mount                            
      13ms sys-fs-fuse-connections.mount                      
      13ms initrd-udevadm-cleanup-db.service
    Code:
    cb@localhost:/> sudo systemd-analyze critical-chain
    The time when unit became active or started is printed after the "@" character.
    The time the unit took to start is printed after the "+" character.
    
    graphical.target @10.519s
    └─display-manager.service @7.207s +3.310s
      └─time-sync.target @7.202s
        └─chronyd.service @7.064s +137ms
          └─network.target @7.062s
            └─NetworkManager.service @6.963s +98ms
              └─network-pre.target @6.961s
                └─wpa_supplicant.service @9.006s +31ms
                  └─dbus.service @5.222s
                    └─basic.target @5.213s
                      └─sockets.target @5.213s
                        └─pcscd.socket @5.213s
                          └─sysinit.target @5.209s
                            └─apparmor.service @886ms +4.322s
                              └─var.mount @816ms +57ms
                                └─local-fs-pre.target @776ms
                                  └─systemd-tmpfiles-setup-dev.service @727ms +48ms
                                    └─kmod-static-nodes.service @615ms +30ms
                                      └─systemd-journald.socket
                                        └─-.mount
                                          └─system.slice
                                            └─-.slice

  5. #5
    Join Date
    Jun 2008
    Location
    Auckland, NZ
    Posts
    23,104
    Blog Entries
    1

    Default Re: Boot is very slow until login Screen

    Ok, nothing unusual in the output. Have a look at the journalling from display-manager.service...
    Code:
    sudo journalctl -u display-manager.service
    There may be some other services which need checking further. Hopefully others will chime in here with further advice.
    openSUSE Leap 15.2; KDE Plasma 5

  6. #6
    Join Date
    Dec 2008
    Location
    FL, USA
    Posts
    3,023
    Blog Entries
    1

    Default Re: Boot is very slow until login Screen

    You haven't told us anything about your hardware. Please paste here the following input/output from Konsole or other GUI terminal:
    Code:
    sudo inxi -Faz
    Knowing no more, I'm thinking this could be a slow graphics issue caused by using a generic graphics driver. If NVidia GPU, the cause could be upgrade to the proprietary drivers failed if they were in use in 15.2, otherwise kernel-default-extra didn't get installed, or maybe both.
    Reg. Linux User #211409 *** multibooting since 1992
    Primary: 15.2, +TW, 15.3, 15.1 & 13.1 on Haswell
    Secondary: eComStation (OS/2) &15.2 on i965P w/ Radeon
    Tertiary: Mageia,Fedora,Debian,more on Kaby Lake,iQ45,iQ43,iG41,iG3X,i965G,AMD,NVidia&&&&&

  7. #7
    Join Date
    Jan 2014
    Location
    Erlangen
    Posts
    2,890

    Default Re: Boot is very slow until login Screen

    Quote Originally Posted by priam View Post
    I have done an fresh install of Leap 15.3 over the existing one (15.2) formatting the linux BTRFS partition sda2. I did not do anything regarding Swap partition (sda3). The install is good and the system is running fine.
    But each time I boot, it take a long time from grub menu to login screen (around 2mn). Is there something wrong with mi configuration?
    Show startup using the following command:
    Code:
    3400G:~ # journalctl -b -u init.scope --grep Reached -o short-monotonic                 
    -- Logs begin at Sat 2021-06-19 04:28:11 CEST, end at Sun 2021-06-20 08:51:21 CEST. -- 
    [    3.277887] 3400G systemd[1]: Reached target System Initialization. 
    [    3.295075] 3400G systemd[1]: Reached target Paths. 
    [    3.295094] 3400G systemd[1]: Reached target Basic System. 
    [    3.434260] 3400G systemd[1]: Reached target Initrd Root Device. 
    [    4.024184] 3400G systemd[1]: Reached target Remote File Systems (Pre). 
    [    4.024227] 3400G systemd[1]: Reached target Remote File Systems. 
    [    4.066151] 3400G systemd[1]: Reached target Initrd Root File System. 
    [    4.286943] 3400G systemd[1]: Reached target Initrd File Systems. 
    [    4.286979] 3400G systemd[1]: Reached target Initrd Default Target. 
    [    4.336889] 3400G systemd[1]: Reached target Switch Root. 
    [    5.103910] 3400G systemd[1]: Reached target Local File Systems. 
    [    5.276893] 3400G systemd[1]: Reached target System Initialization. 
    [    5.281985] 3400G systemd[1]: Reached target Paths. 
    [    5.282291] 3400G systemd[1]: Reached target Sockets. 
    [    5.282352] 3400G systemd[1]: Reached target Basic System. 
    [    5.531030] 3400G systemd[1]: Reached target Sound Card. 
    [    5.547895] 3400G systemd[1]: Reached target Network. 
    [    5.548069] 3400G systemd[1]: Reached target Network is Online. 
    [    5.548207] 3400G systemd[1]: Reached target Host and Network Name Lookups. 
    [    5.577594] 3400G systemd[1]: Reached target System Time Synchronized. 
    [    5.581937] 3400G systemd[1]: Reached target Timers. 
    [    5.857906] 3400G systemd[1]: Reached target Login Prompts. 
    [    5.919943] 3400G systemd[1]: Reached target Multi-User System. 
    [    6.369966] 3400G systemd[1]: Reached target Graphical Interface. 
    3400G:~ #
    Copy the command and paste it into a root shell.
    AMD Athlon 4850e (2009), openSUSE 13.1, KDE 4, Intel i3-4130 (2014), i7-6700K (2016), i5-8250U (2018), AMD Ryzen 5 3400G (2020), openSUSE Tumbleweed, KDE Plasma 5

  8. #8
    Join Date
    Dec 2020
    Location
    France
    Posts
    72

    Default Re: Boot is very slow until login Screen

    Hello,

    I need to add the following precision, if it could help.
    The long delay i'm talking about is in between hitting enter in the grub menu until I reach the login menu (around 2 minutes).
    When I enter my login and password, the session starts normaly.

    I have a quit old PC and I have never had to use specific driver when I was running with Leap 15.2 (only the ones provided by Opensuse).

    I have experience such a problem when I have had installed Leap 15.2 in the past, The problem was about inconsistancy in the Swap UUID in the paramter of the boot loader, but I didn't find any think wrong in it.
    Regards


    Code:
    cb@cblinux:~> sudo journalctl -u display-manager.service
    [sudo] Mot de passe de root : 
    -- Logs begin at Sun 2021-06-20 07:44:52 CEST, end at Sun 2021-06-20 08:32:40 CEST. --
    juin 20 07:45:05 cblinux systemd[1]: Starting X Display Manager...
    juin 20 07:45:05 cblinux display-manager[1546]: /etc/vconsole.conf available
    juin 20 07:45:05 cblinux display-manager[1546]: KEYMAP: fr-latin1
    juin 20 07:45:05 cblinux display-manager[1546]: Command: localectl set-keymap fr-latin1
    juin 20 07:45:05 cblinux display-manager[1546]: I: Using systemd /usr/share/systemd/kbd-model-map mapping
    juin 20 07:45:09 cblinux sddm[3785]: Initializing...
    juin 20 07:45:09 cblinux sddm[3785]: Starting...
    juin 20 07:45:09 cblinux sddm[3785]: Logind interface found
    juin 20 07:45:09 cblinux sddm[3785]: Adding new display on vt 7 ...
    juin 20 07:45:09 cblinux sddm[3785]: Loading theme configuration from ""
    juin 20 07:45:09 cblinux sddm[3785]: Display server starting...
    juin 20 07:45:09 cblinux sddm[3785]: Adding cookie to "/run/sddm/{79f79168-3290-48cb-bc85-dc9261972dba}"
    juin 20 07:45:09 cblinux sddm[3785]: Running: /usr/bin/X -nolisten tcp -auth /run/sddm/{79f79168-3290-48cb-bc85-dc9261972dba} -background none -noreset -displayfd 17 -seat seat0 >
    juin 20 07:45:10 cblinux display-manager[1528]: Starting service sddm..done
    juin 20 07:45:10 cblinux systemd[1]: Started X Display Manager.
    juin 20 07:45:10 cblinux sddm[3785]: Setting default cursor
    juin 20 07:45:11 cblinux sddm[3785]: Running display setup script  "/etc/X11/xdm/Xsetup"
    juin 20 07:45:11 cblinux sddm[3785]: Display server started.
    juin 20 07:45:11 cblinux sddm[3785]: Socket server starting...
    juin 20 07:45:11 cblinux sddm[3785]: Socket server started.
    juin 20 07:45:11 cblinux sddm[3785]: Loading theme configuration from "/usr/share/sddm/themes/plasma-chili/theme.conf"
    juin 20 07:45:11 cblinux sddm[3785]: Greeter starting...
    juin 20 07:45:11 cblinux sddm-helper[3820]: [PAM] Starting...
    juin 20 07:45:11 cblinux sddm-helper[3820]: [PAM] Authenticating...
    juin 20 07:45:11 cblinux sddm-helper[3820]: [PAM] returning.
    juin 20 07:45:11 cblinux sddm-helper[3820]: pam_unix(sddm-greeter:session): session opened for user sddm by (uid=0)
    juin 20 07:45:11 cblinux sddm[3785]: Greeter session started successfully
    juin 20 07:45:11 cblinux sddm[3785]: Message received from greeter: Connect
    juin 20 07:45:16 cblinux sddm[3785]: Message received from greeter: Login
    juin 20 07:45:16 cblinux sddm[3785]: Reading from "/usr/share/xsessions/plasma5.desktop"
    juin 20 07:45:16 cblinux sddm[3785]: Reading from "/usr/share/xsessions/plasma5.desktop"
    juin 20 07:45:16 cblinux sddm[3785]: Session "/usr/share/xsessions/plasma5.desktop" selected, command: "/usr/bin/startplasma-x11"
    juin 20 07:45:16 cblinux sddm-helper[3921]: [PAM] Starting...
    juin 20 07:45:16 cblinux sddm-helper[3921]: [PAM] Authenticating...
    juin 20 07:45:16 cblinux sddm-helper[3921]: [PAM] Preparing to converse...
    juin 20 07:45:16 cblinux sddm-helper[3921]: [PAM] Conversation with 1 messages
    juin 20 07:45:16 cblinux sddm-helper[3921]: [PAM] returning.
    juin 20 07:45:16 cblinux sddm[3785]: Authenticated successfully
    juin 20 07:45:16 cblinux sddm[3785]: Auth: sddm-helper exited successfully
    juin 20 07:45:16 cblinux sddm[3785]: Greeter stopped.
    juin 20 07:45:16 cblinux sddm-helper[3921]: pam_unix(sddm:session): session opened for user cb by (uid=0)
    juin 20 07:45:16 cblinux sddm-helper[3921]: Starting: "/etc/X11/xdm/Xsession \"/usr/bin/startplasma-x11\""
    juin 20 07:45:16 cblinux sddm[3785]: Session started

    Code:
    cb@cblinux:~> sudo inxi -Faz
    System:    Kernel: 5.3.18-59.5-default x86_64 bits: 64 compiler: gcc v: 7.5.0 
               parameters: BOOT_IMAGE=/boot/vmlinuz-5.3.18-59.5-default root=UUID=194095e6-6c9b-4828-8ee1-d42527325bf8 
               splash=silent resume=/dev/disk/by-uuid/7a298333-7aad-4c7e-855f-2277d711a115 mitigations=auto quiet 
               Console: tty 1 dm: SDDM Distro: openSUSE Leap 15.3 
    Machine:   Type: Portable System: Dell product: Latitude E6500 v: N/A serial: <filter> Chassis: type: 8 serial: <filter> 
               Mobo: Dell model: 0F328M serial: <filter> BIOS: Dell v: A29 date: 06/04/2013 
    Battery:   ID-1: BAT0 charge: 42.2 Wh condition: 42.2/57.7 Wh (73%) volts: 12.5/11.1 model: Samsung SDI DELL PT43692 
               type: Li-ion serial: <filter> status: Full 
               Device-1: hidpp_battery_0 model: Logitech Marathon Mouse/Performance Plus M705 serial: <filter> 
               charge: 100% (should be ignored) rechargeable: yes status: Discharging 
    CPU:       Topology: Dual Core model: Intel Core2 Duo P8400 bits: 64 type: MCP arch: Penryn family: 6 model-id: 17 (23) 
               stepping: A (10) microcode: A0C L1 cache: 128 KiB L2 cache: 3072 KiB 
               flags: lm nx pae sse sse2 sse3 sse4_1 ssse3 vmx bogomips: 9038 
               Speed: 797 MHz min/max: 800/2268 MHz boost: enabled Core speeds (MHz): 1: 797 2: 797 
               Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled 
               Type: l1tf mitigation: PTE Inversion 
               Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode; SMT disabled 
               Type: meltdown mitigation: PTI 
               Type: spec_store_bypass status: Vulnerable 
               Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization 
               Type: spectre_v2 mitigation: Full generic retpoline, STIBP: disabled, RSB filling 
               Type: srbds status: Not affected 
               Type: tsx_async_abort status: Not affected 
    Graphics:  Device-1: Intel Mobile 4 Series Integrated Graphics vendor: Dell driver: i915 v: kernel bus ID: 00:02.0 
               chip ID: 8086:2a42 
               Device-2: Microdia Sonix Integrated Webcam type: USB driver: uvcvideo bus ID: 7-6:4 chip ID: 0c45:63f8 
               Display: server: X.org 1.20.3 compositor: kwin_x11 driver: modesetting unloaded: fbdev,vesa alternate: intel 
               tty: 179x47 
               Message: Advanced graphics data unavailable in console for root. 
    Audio:     Device-1: Intel 82801I HD Audio vendor: Dell driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:293e 
               Device-2: GN Netcom Jabra Engage 75 Stereo type: USB driver: jabra,snd-usb-audio,usbhid bus ID: 5-1:2 
               chip ID: 0b0e:a346 serial: <filter> 
               Sound Server: ALSA v: k5.3.18-59.5-default 
    Network:   Device-1: Intel 82567LM Gigabit Network vendor: Dell driver: e1000e v: 3.2.6-k port: efe0 bus ID: 00:19.0 
               chip ID: 8086:10f5 
               IF: eth0 state: down mac: <filter> 
               Device-2: Intel WiFi Link 5100 driver: iwlwifi v: kernel port: 1100 bus ID: 0c:00.0 chip ID: 8086:4232 
               IF: wlan0 state: up mac: <filter> 
               Device-3: Dell Wireless 370 Bluetooth Mini-card type: USB driver: btusb bus ID: 1-1.3:5 chip ID: 413c:8156 
    Drives:    Local Storage: total: 232.89 GiB used: 11.53 GiB (5.0%) 
               ID-1: /dev/sda vendor: Samsung model: SSD 750 EVO 250GB family: based SSDs size: 232.89 GiB block size: 
               physical: 512 B logical: 512 B sata: 3.1 speed: 3.0 Gb/s serial: <filter> rev: 1B6Q temp: 36 C scheme: GPT 
               SMART: yes state: enabled health: PASSED on: 122d 11h cycles: 2829 written: 2.43 TiB 
    RAID:      Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci v: 3.0 port: 6ea0 bus ID: 00:1f.2 
               chip ID: 8086.282a rev: 03 
    Partition: ID-1: / raw size: 140.00 GiB size: 140.00 GiB (100.00%) used: 11.53 GiB (8.2%) fs: btrfs block size: 4096 B 
               dev: /dev/sda2 
               ID-2: /home raw size: 140.00 GiB size: 140.00 GiB (100.00%) used: 11.53 GiB (8.2%) fs: btrfs block size: 4096 B 
               dev: /dev/sda2 
               ID-3: /opt raw size: 140.00 GiB size: 140.00 GiB (100.00%) used: 11.53 GiB (8.2%) fs: btrfs block size: 4096 B 
               dev: /dev/sda2 
               ID-4: /tmp raw size: 140.00 GiB size: 140.00 GiB (100.00%) used: 11.53 GiB (8.2%) fs: btrfs block size: 4096 B 
               dev: /dev/sda2 
               ID-5: /var raw size: 140.00 GiB size: 140.00 GiB (100.00%) used: 11.53 GiB (8.2%) fs: btrfs block size: 4096 B 
               dev: /dev/sda2 
    Swap:      Kernel: swappiness: 60 (default) cache pressure: 100 (default) 
               ID-1: swap-1 type: partition size: 8.00 GiB used: 0 KiB (0.0%) priority: -2 dev: /dev/sda3 
    Sensors:   System Temperatures: cpu: 42.0 C mobo: N/A sodimm: 42.0 C 
               Fan Speeds (RPM): cpu: 0 
    Info:      Processes: 193 Uptime: N/A Memory: 3.79 GiB used: 1.05 GiB (27.6%) Init: systemd v: 246 runlevel: 5 
               target: graphical.target Compilers: gcc: N/A Shell: bash (sudo) v: 4.4.23 running in: tty 1 inxi: 3.1.00

  9. #9
    Join Date
    Dec 2020
    Location
    France
    Posts
    72

    Default Re: Boot is very slow until login Screen

    Hi Karl,
    Here is the command you asked for:
    Code:
    cblinux:/home/cb # journalctl -b -u init.scope --grep Reached -o short-monotonic  
    -- Logs begin at Sun 2021-06-20 07:44:52 CEST, end at Sun 2021-06-20 08:53:30 CEST. --
    [    5.249447] localhost systemd[1]: Reached target System Initialization.
    [    5.353089] localhost systemd[1]: Reached target Paths.
    [    5.353189] localhost systemd[1]: Reached target Basic System.
    [    8.460286] localhost systemd[1]: Reached target Initrd Root Device.
    [    8.484717] localhost systemd[1]: Reached target Remote File Systems (Pre).
    [    8.484826] localhost systemd[1]: Reached target Remote File Systems.
    [    8.552719] localhost systemd[1]: Reached target Initrd Root File System.
    [    8.874300] localhost systemd[1]: Reached target Initrd File Systems.
    [    8.874399] localhost systemd[1]: Reached target Initrd Default Target.
    [    8.952215] localhost systemd[1]: Reached target Switch Root.
    [   14.433362] cblinux systemd[1]: Reached target System Initialization.
    [   14.435153] cblinux systemd[1]: Reached target Paths.
    [   14.435978] cblinux systemd[1]: Reached target Sockets.
    [   14.436093] cblinux systemd[1]: Reached target Basic System.
    [   14.575334] cblinux systemd[1]: Reached target Sound Card.
    [   14.646773] cblinux systemd[1]: Reached target Host and Network Name Lookups.
    [   14.646899] cblinux systemd[1]: Reached target User and Group Name Lookups.
    [   15.059411] cblinux systemd[1]: Reached target Smart Card.
    [   16.361464] cblinux systemd[1]: Reached target Network (Pre).
    [   16.443551] cblinux systemd[1]: Reached target Network.
    [   16.563017] cblinux systemd[1]: Reached target System Time Synchronized.
    [   16.570847] cblinux systemd[1]: Reached target Timers.
    [   17.269758] cblinux systemd[1]: Reached target Bluetooth.
    [   21.161522] cblinux systemd[1]: Reached target Login Prompts.
    [   21.161832] cblinux systemd[1]: Reached target Multi-User System.
    [   21.682719] cblinux systemd[1]: Reached target Graphical Interface.

    Quote Originally Posted by karlmistelberger View Post
    Show startup using the following command:
    Code:
    3400G:~ # journalctl -b -u init.scope --grep Reached -o short-monotonic                 
    -- Logs begin at Sat 2021-06-19 04:28:11 CEST, end at Sun 2021-06-20 08:51:21 CEST. -- 
    [    3.277887] 3400G systemd[1]: Reached target System Initialization. 
    [    3.295075] 3400G systemd[1]: Reached target Paths. 
    [    3.295094] 3400G systemd[1]: Reached target Basic System. 
    [    3.434260] 3400G systemd[1]: Reached target Initrd Root Device. 
    [    4.024184] 3400G systemd[1]: Reached target Remote File Systems (Pre). 
    [    4.024227] 3400G systemd[1]: Reached target Remote File Systems. 
    [    4.066151] 3400G systemd[1]: Reached target Initrd Root File System. 
    [    4.286943] 3400G systemd[1]: Reached target Initrd File Systems. 
    [    4.286979] 3400G systemd[1]: Reached target Initrd Default Target. 
    [    4.336889] 3400G systemd[1]: Reached target Switch Root. 
    [    5.103910] 3400G systemd[1]: Reached target Local File Systems. 
    [    5.276893] 3400G systemd[1]: Reached target System Initialization. 
    [    5.281985] 3400G systemd[1]: Reached target Paths. 
    [    5.282291] 3400G systemd[1]: Reached target Sockets. 
    [    5.282352] 3400G systemd[1]: Reached target Basic System. 
    [    5.531030] 3400G systemd[1]: Reached target Sound Card. 
    [    5.547895] 3400G systemd[1]: Reached target Network. 
    [    5.548069] 3400G systemd[1]: Reached target Network is Online. 
    [    5.548207] 3400G systemd[1]: Reached target Host and Network Name Lookups. 
    [    5.577594] 3400G systemd[1]: Reached target System Time Synchronized. 
    [    5.581937] 3400G systemd[1]: Reached target Timers. 
    [    5.857906] 3400G systemd[1]: Reached target Login Prompts. 
    [    5.919943] 3400G systemd[1]: Reached target Multi-User System. 
    [    6.369966] 3400G systemd[1]: Reached target Graphical Interface. 
    3400G:~ #
    Copy the command and paste it into a root shell.

  10. #10
    Join Date
    Dec 2008
    Location
    FL, USA
    Posts
    3,023
    Blog Entries
    1

    Default Re: Boot is very slow until login Screen

    ISTR webcams built into laptops can create trouble with Intel graphics of your vintage, and blacklisting or appropriate configuration of, or firmware for the webcam, could serve at least as a workaround pending a more appropriate, if not permanent, solution to such trouble.

    Quote Originally Posted by priam View Post
    Code:
    Message: Advanced graphics data unavailable in console for root.
    This wouldn't have happened if you had followed the instructions given:
    from Konsole or other GUI terminal
    Reg. Linux User #211409 *** multibooting since 1992
    Primary: 15.2, +TW, 15.3, 15.1 & 13.1 on Haswell
    Secondary: eComStation (OS/2) &15.2 on i965P w/ Radeon
    Tertiary: Mageia,Fedora,Debian,more on Kaby Lake,iQ45,iQ43,iG41,iG3X,i965G,AMD,NVidia&&&&&

Page 1 of 14 12311 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •