Page 1 of 4 123 ... LastLast
Results 1 to 10 of 39

Thread: Xorg fails to start with 4 monitors (nvidia)

  1. #1

    Default Xorg fails to start with 4 monitors (nvidia)

    Hi,

    I tried to upgrade from Leap 42.3 to 15.2 (new install).

    I can get two monitors working. X seems to crash when I enable all 4 monitors with the same conf as was used in 42.3.

    Graphics cards:
    02:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1) (prog-if 00 [VGA controller])
    03:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560 Ti] (rev a1) (prog-if 00 [VGA controller])

    I have two 1920x1200 DVI monitors on each graphics card.

    The Xorg logfile looks OK just almost until the end:
    Code:
    [    38.460] (II) Initializing extension NV-GLX
    [    38.461] (II) Initializing extension NV-CONTROL
    [    38.708] (EE) 
    [    38.708] (EE) Backtrace:
    [    38.708] (EE) 0: /usr/bin/X (xorg_backtrace+0x65) [0x561c4bc41585]
    [    38.708] (EE) 1: /usr/bin/X (0x561c4ba8f000+0x1b6259) [0x561c4bc45259]
    [    38.708] (EE) 2: /lib64/libpthread.so.0 (0x7f917bfbb000+0x132d0) [0x7f917bfce2d0]
    [    38.708] (EE) 3: /lib64/libc.so.6 (gsignal+0x110) [0x7f917bc39420]
    [    38.708] (EE) 4: /lib64/libc.so.6 (abort+0x151) [0x7f917bc3aa01]
    [    38.708] (EE) 5: /lib64/libc.so.6 (0x7f917bc00000+0x31a1a) [0x7f917bc31a1a]
    [    38.708] (EE) 6: /lib64/libc.so.6 (0x7f917bc00000+0x31a92) [0x7f917bc31a92]
    [    38.708] (EE) 7: /usr/bin/X (0x561c4ba8f000+0x41d09) [0x561c4bad0d09]
    [    38.708] (EE) 8: /usr/bin/X (0x561c4ba8f000+0x9c568) [0x561c4bb2b568]
    [    38.708] (EE) 9: /usr/bin/X (_CallCallbacks+0x34) [0x561c4baf1374]
    [    38.708] (EE) 10: /usr/bin/X (0x561c4ba8f000+0x60fc2) [0x561c4baeffc2]
    [    38.708] (EE) 11: /lib64/libc.so.6 (__libc_start_main+0xea) [0x7f917bc2434a]
    [    38.708] (EE) 12: /usr/bin/X (_start+0x2a) [0x561c4bad9cba]
    [    38.708] (EE) 
    [    38.708] (EE) 
    Fatal server error:
    [    38.708] (EE) Caught signal 6 (Aborted). Server aborting
    [    38.708] (EE) 
    [    38.708] (EE) 
    Please consult the The X.Org Foundation support 
             at http://wiki.x.org
     for help. 
    [    38.708] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [    38.708] (EE) 
    [    39.606] (EE) Server terminated with error (1). Closing log file.
    I'd be happy to get hints on how to resolve this issue.

  2. #2
    Join Date
    Jun 2008
    Location
    Auckland, NZ
    Posts
    22,857
    Blog Entries
    1

    Default Re: Xorg fails to start with 4 monitors (nvidia)

    Quote Originally Posted by karlheinrich View Post
    Hi,

    I tried to upgrade from Leap 42.3 to 15.2 (new install).

    I can get two monitors working. X seems to crash when I enable all 4 monitors with the same conf as was used in 42.3.
    Are you referring to a configuration file? If so, please share that information.

    Some more detailed information about your graphics card and drivers in use...
    Code:
    inxi -Gxx
    openSUSE Leap 15.2; KDE Plasma 5

  3. #3
    Join Date
    Dec 2008
    Location
    FL, USA
    Posts
    2,807
    Blog Entries
    1

    Default Re: Xorg fails to start with 4 monitors (nvidia)

    My preliminary finding with two old NVidia cards and the default Modesetting DDX is that Xorg does not find any outputs on the second card. Using instead the Nouveau DDX all four displays work, but I haven't yet tested configuring their positions. It's Easter today, so it will be some time yet before I can spend more time on this.
    Reg. Linux User #211409 *** multibooting since 1992
    Primary: 15.2, +TW, 15.1, 15.0 & 13.1 on Haswell
    Secondary: eComStation (OS/2) &15.1 on i965P w/ Radeon
    Tertiary: Mageia,Fedora,Debian,more on Kaby Lake,iQ45,iQ43,iG41,iG3X,i965G,AMD,NVidia&&&&&

  4. #4

    Default Re: Xorg fails to start with 4 monitors (nvidia)

    Thanks for your reply!

    Quote Originally Posted by deano_ferrari View Post
    Are you referring to a configuration file? If so, please share that information.
    Here is my working /etc/X11/xorg.conf.d/20-nvidia.conf from Leap 42.3:
    Code:
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings:  version 390.129  (buildmeister@swio-display-x64-rhel04-14)  Tue Jul 23 01:36:55 PDT 2019
    
    Section "ServerLayout"
        Identifier     "Layout0"
        Screen      0  "Screen0" 1920 0
        Screen      1  "Screen1" 3840 0
        Screen      2  "Screen2" 5760 0
        Screen      3  "Screen3" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "Mouse0" "CorePointer"
        Option         "Xinerama" "1"
    EndSection
    
    Section "Files"
    EndSection
    
    Section "InputDevice"
        # generated from data in "/etc/sysconfig/mouse"
        Identifier     "Mouse0"
        Driver         "mouse"
        Option         "Protocol" "IMPS/2"
        Option         "Device" "/dev/input/mice"
        Option         "Emulate3Buttons" "yes"
        Option         "ZAxisMapping" "4 5"
    EndSection
    
    Section "InputDevice"
        # generated from default
        Identifier     "Keyboard0"
        Driver         "kbd"
    EndSection
    
    Section "Monitor"
        # HorizSync source: edid, VertRefresh source: edid
        Identifier     "Monitor0"
        VendorName     "Unknown"
        ModelName      "LG Electronics 24EB23"
        HorizSync       30.0 - 83.0
        VertRefresh     56.0 - 75.0
        Option         "DPMS"
    EndSection
    
    Section "Monitor"
        # HorizSync source: edid, VertRefresh source: edid
        Identifier     "Monitor1"
        VendorName     "Unknown"
        ModelName      "LG Electronics 24EB23"
        HorizSync       30.0 - 83.0
        VertRefresh     56.0 - 75.0
        Option         "DPMS"
    EndSection
    
    Section "Monitor"
        # HorizSync source: edid, VertRefresh source: edid
        Identifier     "Monitor2"
        VendorName     "Unknown"
        ModelName      "Samsung SyncMaster"
        HorizSync       30.0 - 81.0
        VertRefresh     50.0 - 63.0
        Option         "DPMS"
    EndSection
    
    Section "Monitor"
        # HorizSync source: edid, VertRefresh source: edid
        Identifier     "Monitor3"
        VendorName     "Unknown"
        ModelName      "Samsung SyncMaster"
        HorizSync       30.0 - 81.0
        VertRefresh     50.0 - 63.0
        Option         "DPMS"
    EndSection
    
    Section "Device"
        Identifier     "Device0"
        Driver         "nvidia"
        VendorName     "NVIDIA Corporation"
        BoardName      "GeForce GTX 560 Ti"
        BusID          "PCI:2:0:0"
        Screen          0
    EndSection
    
    Section "Device"
        Identifier     "Device1"
        Driver         "nvidia"
        VendorName     "NVIDIA Corporation"
        BoardName      "GeForce GTX 560 Ti"
        BusID          "PCI:3:0:0"
        Screen          0
    EndSection
    
    Section "Device"
        Identifier     "Device2"
        Driver         "nvidia"
        VendorName     "NVIDIA Corporation"
        BoardName      "GeForce GTX 560 Ti"
        BusID          "PCI:3:0:0"
        Screen          1
    EndSection
    
    Section "Device"
        Identifier     "Device3"
        Driver         "nvidia"
        VendorName     "NVIDIA Corporation"
        BoardName      "GeForce GTX 560 Ti"
        BusID          "PCI:2:0:0"
        Screen          1
    EndSection
    
    Section "Screen"
        Identifier     "Screen0"
        Device         "Device0"
        Monitor        "Monitor0"
        DefaultDepth    24
        Option         "Stereo" "0"
        Option         "nvidiaXineramaInfoOrder" "DFP-0"
        Option         "metamodes" "DVI-I-2: nvidia-auto-select +0+0"
        Option         "SLI" "Off"
        Option         "MultiGPU" "Off"
        Option         "BaseMosaic" "off"
        SubSection     "Display"
            Depth       24
        EndSubSection
    EndSection
    
    Section "Screen"
        Identifier     "Screen1"
        Device         "Device1"
        Monitor        "Monitor1"
        DefaultDepth    24
        Option         "Stereo" "0"
        Option         "metamodes" "DVI-I-2: nvidia-auto-select +0+0"
        Option         "SLI" "Off"
        Option         "MultiGPU" "Off"
        Option         "BaseMosaic" "off"
        SubSection     "Display"
            Depth       24
        EndSubSection
    EndSection
    
    Section "Screen"
        Identifier     "Screen2"
        Device         "Device2"
        Monitor        "Monitor2"
        DefaultDepth    24
        Option         "Stereo" "0"
        Option         "nvidiaXineramaInfoOrder" "DFP-2"
        Option         "metamodes" "DVI-I-3: nvidia-auto-select +0+0"
        Option         "SLI" "Off"
        Option         "MultiGPU" "Off"
        Option         "BaseMosaic" "off"
        SubSection     "Display"
            Depth       24
        EndSubSection
    EndSection
    
    Section "Screen"
        Identifier     "Screen3"
        Device         "Device3"
        Monitor        "Monitor3"
        DefaultDepth    24
        Option         "Stereo" "0"
        Option         "nvidiaXineramaInfoOrder" "DFP-2"
        Option         "metamodes" "DVI-I-3: nvidia-auto-select +0+0"
        Option         "SLI" "Off"
        Option         "MultiGPU" "Off"
        Option         "BaseMosaic" "off"
        SubSection     "Display"
            Depth       24
        EndSubSection
    EndSection
    Quote Originally Posted by deano_ferrari View Post
    Some more detailed information about your graphics card and drivers in use...
    Code:
    inxi -Gxx
    inxi -Gxx Leap 15.2 with 20-nvidia.conf (X aborts):
    Code:
    Graphics:  Device-1: NVIDIA GF114 [GeForce GTX 560 Ti] vendor: ASUSTeK driver: nvidia v: 390.141 bus ID: 02:00.0 
               chip ID: 10de:1200 
               Device-2: NVIDIA GF114 [GeForce GTX 560 Ti] vendor: ASUSTeK driver: nvidia v: 390.141 bus ID: 03:00.0 
               chip ID: 10de:1200 
               Display: server: X.org 1.20.3 driver: nvidia tty: 160x64 
               Message: Advanced graphics data unavailable in console. Try -G --display
    inxi -Gxx Leap 15.2 without 20-nvidia.conf (2 displays):
    Code:
    Graphics:  Device-1: NVIDIA GF114 [GeForce GTX 560 Ti] vendor: ASUSTeK driver: nvidia v: 390.141 bus ID: 02:00.0 
               chip ID: 10de:1200 
               Device-2: NVIDIA GF114 [GeForce GTX 560 Ti] vendor: ASUSTeK driver: nvidia v: 390.141 bus ID: 03:00.0 
               chip ID: 10de:1200 
               Display: x11 server: X.Org 1.20.3 compositor: kwin_x11 driver: modesetting,nouveau,nvidia unloaded: fbdev,vesa 
               alternate: nv resolution: 1: 1920x1200~60Hz 2: 1920x1200~60Hz s-dpi: 93 
               OpenGL: renderer: GeForce GTX 560 Ti/PCIe/SSE2 v: 4.6.0 NVIDIA 390.141 direct render: Yes

  5. #5
    Join Date
    Dec 2008
    Location
    FL, USA
    Posts
    2,807
    Blog Entries
    1

    Default Re: Xorg fails to start with 4 monitors (nvidia)

    Quote Originally Posted by karlheinrich View Post
    The Xorg logfile looks OK just almost until the end:
    There's not enough context in that log snippet to suggest to me what lead to the backtrace.

    My post #3 should be disregarded. I didn't spend enough time on the issues before writing, and TW behavior isn't really applicable anyway.

    xorg.con* files generated by nvidia-settings are intended only for use with NVidia's own proprietary drivers. They usually include elements not applicable to FOSS drivers. Nvidia-settings' xorg.conf* should be renamed to something not ending in .conf, or removed entirely, for FOSS drivers to do their job competently in expected fashion. FOSS graphics drivers virtually always work automagically, unusually needing any configuration in /etc/X11/ anywhere. Xinerama, as you have configured, and is off by default, would be one of the exceptions.

    On upgrade to 15.2 from something older, NVidia's drivers should be removed prior to the upgrade, and reinstalled, if necessary, only after the upgrade is otherwise successful. A successful removal usually requires following exactly the removal instructions that were supposed to be, and may in fact have been, provided with the installed proprietary drivers.

    I found a motherboard here that works with 2 old NVidia PCIe cards. Whether using the Modesetting DDX or the Nouveau DDX, Plasma is using all 4 displays in 15.2. Using Modesetting DDX:
    Code:
    # cat bin/xsetup.sh
    xrandr --output DVI-I-1 --primary --output DVI-I-1-2 --above DVI-I-1 --rate 60 --output DVI-I-1-3 --above DVI-I-1-2 --output HDMI-1 --above DVI-I-1-3
    xrandr | egrep 'onnect|creen|\*' | grep -v disconn | sort -r
    inxi -GSay
    # bin/xsetup.sh
    Screen 0: minimum 320 x 200, current 2560 x 4800, maximum 16384 x 16384
    HDMI-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 160mm x 90mm
    DVI-I-1-3 connected 1920x1200+0+1080 (normal left inverted right x axis y axis) 519mm x 324mm
    DVI-I-1-2 connected 2560x1080+0+2280 (normal left inverted right x axis y axis) 673mm x 284mm
    DVI-I-1 connected primary 2560x1440+0+3360 (normal left inverted right x axis y axis) 598mm x 336mm
       2560x1440     59.95*+
       2560x1080     60.00*+
       1920x1200     59.95*+
       1920x1080     60.00*+  59.96    59.94    59.93    30.00    24.00    29.97    23.98  
    # inxi -GSay
    System:
      Host: ga970 Kernel: 5.3.18-lp152.66-default x86_64 bits: 64 compiler: gcc  v: 7.5.0...
      Desktop: KDE Plasma 5.18.6 tk: Qt 5.12.7 wm: kwin_x11 vt: 7 dm: TDM 
      Distro: openSUSE Leap 15.2 
    Graphics:
      Device-1: NVIDIA GF108 [GeForce GT 630] vendor: Gigabyte driver: nouveau 
      v: kernel bus-ID: 01:00.0 chip-ID: 10de:0f00 class-ID: 0300 
      Device-2: NVIDIA G84 [GeForce 8600 GT] vendor: XFX Pine driver: nouveau 
      v: kernel bus-ID: 05:00.0 chip-ID: 10de:0402 class-ID: 0300 
      Display: server: X.Org 1.20.3 compositor: kwin_x11 driver: loaded: modesetting
      unloaded: fbdev,vesa alternate: nouveau,nv,nvidia 
      display-ID: :0 screens: 1 
      Screen-1: 0 s-res: 2560x4800 s-dpi: 120 s-size: 540x1013mm (21.3x39.9") 
      s-diag: 1148mm (45.2") 
      Monitor-1: DVI-I-1 res: 2560x1440 hz: 60 dpi: 109 
      size: 598x336mm (23.5x13.2") diag: 686mm (27") 
      Monitor-2: HDMI-1 res: 1920x1080 hz: 60 dpi: 305 size: 160x90mm (6.3x3.5") 
      diag: 184mm (7.2") 
      Monitor-3: DVI-I-1-2 res: 2560x1080 hz: 60 dpi: 97 
      size: 673x284mm (26.5x11.2") diag: 730mm (28.8") 
      Monitor-4: DVI-I-1-3 res: 1920x1200 hz: 60 dpi: 94 
      size: 519x324mm (20.4x12.8") diag: 612mm (24.1") 
      OpenGL: renderer: NVC1 v: 4.3 Mesa 19.3.4 direct render: Yes
    Using Nouveau DDX:
    Code:
    # cat bin/xsetup.sh
    xrandr --output DVI-I-1 --primary --output DVI-I-1-2 --above DVI-I-1 --rate 60 --output DVI-I-1-3 --above DVI-I-1-2 --output HDMI-1 --above DVI-I-1-3
    xrandr | egrep 'onnect|creen|\*' | grep -v disconn | sort -r
    inxi -SGay
    # bin/xsetup.sh
    Screen 0: minimum 320 x 200, current 2560 x 4800, maximum 16384 x 16384
    HDMI-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 160mm x 90mm
    DVI-I-1-3 connected 1920x1200+0+1080 (normal left inverted right x axis y axis) 519mm x 324mm
    DVI-I-1-2 connected 2560x1080+0+2280 (normal left inverted right x axis y axis) 673mm x 284mm
    DVI-I-1 connected primary 2560x1440+0+3360 (normal left inverted right x axis y axis) 598mm x 336mm
       2560x1440     59.95*+
       2560x1080     60.00*+
       1920x1200     59.95*+
       1920x1080     60.00*+  59.94    30.00    24.00    29.97    23.98  
    # inxi -GSay
    System:
      Host: ga970 Kernel: 5.3.18-lp152.66-default x86_64 bits: 64 compiler: gcc  v: 7.5.0...
      Desktop: KDE Plasma 5.18.6 tk: Qt 5.12.7 wm: kwin_x11 vt: 7 dm: TDM 
      Distro: openSUSE Leap 15.2 
    Graphics:
      Device-1: NVIDIA GF108 [GeForce GT 630] vendor: Gigabyte driver: nouveau 
      v: kernel bus-ID: 01:00.0 chip-ID: 10de:0f00 class-ID: 0300 
      Device-2: NVIDIA G84 [GeForce 8600 GT] vendor: XFX Pine driver: nouveau 
      v: kernel bus-ID: 05:00.0 chip-ID: 10de:0402 class-ID: 0300 
      Display: server: X.Org 1.20.3 compositor: kwin_x11 driver: loaded: nouveau 
      unloaded: fbdev,modesetting,vesa alternate: nv,nvidia display-ID: :0 
      screens: 1 
      Screen-1: 0 s-res: 2560x4800 s-dpi: 120 s-size: 540x1013mm (21.3x39.9") 
      s-diag: 1148mm (45.2") 
      Monitor-1: DVI-I-1 res: 2560x1440 hz: 60 dpi: 109 
      size: 598x336mm (23.5x13.2") diag: 686mm (27") 
      Monitor-2: HDMI-1 res: 1920x1080 hz: 60 dpi: 305 size: 160x90mm (6.3x3.5") 
      diag: 184mm (7.2") 
      Monitor-3: DVI-I-1-2 res: 2560x1080 hz: 60 dpi: 97 
      size: 673x284mm (26.5x11.2") diag: 730mm (28.8") 
      Monitor-4: DVI-I-1-3 res: 1920x1200 hz: 60 dpi: 94 
      size: 519x324mm (20.4x12.8") diag: 612mm (24.1") 
      OpenGL: renderer: NVC1 v: 4.3 Mesa 19.3.4 direct render: Yes
    I conclude your problem must be either:
    1. remnants of NVidia proprietary drivers have survived the upgrade, or
    2. NVidia proprietary drivers for 15.2's kernel are improperly installed, or
    3. Your NVidia cards are not supported by NVidia's proprietary drivers in 15.2, or
    4. Some other problem specific to use of proprietary NVidia drivers, or
    5. there is a problem with your display manager (SDDM or LightDM, which might be solved by switching to the other of the two, or some other), or
    6. Your quad Xorg "screens" have a problem that a single Xorg "screen" as I used does not have.[1]


    Note I have used systemsettings5 > Startup & Shutdown > Background Services to disable KScreen2, and use an xrandr script to position the outputs instead. Arandr can be used to configure such a script, or it can be done as I have, manually. This configuration method may be automatically applied regardless of Xorg session type.

    [1] I tried using an adapted version of your 20-nvidia.conf, but need sleep before further proceeding further....
    Reg. Linux User #211409 *** multibooting since 1992
    Primary: 15.2, +TW, 15.1, 15.0 & 13.1 on Haswell
    Secondary: eComStation (OS/2) &15.1 on i965P w/ Radeon
    Tertiary: Mageia,Fedora,Debian,more on Kaby Lake,iQ45,iQ43,iG41,iG3X,i965G,AMD,NVidia&&&&&

  6. #6
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    31,087
    Blog Entries
    15

    Default Re: Xorg fails to start with 4 monitors (nvidia)

    Hi
    The G04 rpms should work? The other option is to try the hard way....

    I would have thought the Desktop takes care of any configuration, I've not created an xorg file in a long time..... I use the GNOME DE it takes care of any monitor configuration and layout (monitors.xml).

    @OP, have you created a test user and logged in as the test user, do things start to function?
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    SUSE SLE, openSUSE Leap/Tumbleweed (x86_64) | GNOME DE
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!

  7. #7

    Default Re: Xorg fails to start with 4 monitors (nvidia)

    Quote Originally Posted by mrmazda View Post
    There's not enough context in that log snippet to suggest to me what lead to the backtrace.

    On upgrade to 15.2 from something older, NVidia's drivers should be removed prior to the upgrade, and reinstalled, if necessary, only after the upgrade is otherwise successful. A successful removal usually requires following exactly the removal instructions that were supposed to be, and may in fact have been, provided with the installed proprietary drivers.
    I did a fresh install of 15.2 on a new SSD so I would be surprised if something old could jump on it except for my old 20-nvidia.conf that i tried to get it working as before. I include the full Xorg.0.log in my next post (size limit reached) I'll play with your suggestions later when i can boot into the new install (this is my main workhorse machine).
    ---
    I conclude your problem must be either:
    1. remnants of NVidia proprietary drivers have survived the upgrade, or Don't think so
    2. NVidia proprietary drivers for 15.2's kernel are improperly installed, or Took Zypper commands from SDB, 2 monitors working
    3. Your NVidia cards are not supported by NVidia's proprietary drivers in 15.2, or 2 monitors working fine
    4. Some other problem specific to use of proprietary NVidia drivers, or Could be. it has always been a pain in the arse
    5. there is a problem with your display manager (SDDM or LightDM, which might be solved by switching to the other of the two, or some other), or I thought it would be using kdm? how can i check?
    6. Your quad Xorg "screens" have a problem that a single Xorg "screen" as I used does not have.[1] As long as i can get a workspace of all 4 displays side by side I don't care how to achieve it ;-)


    Note I have used systemsettings5 > Startup & Shutdown > Background Services to disable KScreen2, and use an xrandr script to position the outputs instead. Arandr can be used to configure such a script, or it can be done as I have, manually. This configuration method may be automatically applied regardless of Xorg session type.

    [1] I tried using an adapted version of your 20-nvidia.conf, but need sleep before further proceeding further....
    I probably need some help doing that as I am not deep enough into the X topic to even know the precise meaning of all the acronyms used in your post. I did try nuveau and vesa-fb configurations both with more or less catastrophic outcomes. Seems I have chosen a very rare hardware configuration but I could always somehow get it to work up until Suse 42.3.

  8. #8

    Default Xorg.0.log 1/2

    Full Xorg.0.log:
    Code:
    [    35.517] (--) Log file renamed from "/var/log/Xorg.pid-2207.log" to "/var/log/Xorg.0.log"
    [    35.518] 
    X.Org X Server 1.20.3
    X Protocol Version 11, Revision 0
    [    35.518] Build Operating System: openSUSE SUSE LINUX
    [    35.518] Current Operating System: Linux danube 5.3.18-lp152.66-default #1 SMP Tue Mar 2 13:18:19 UTC 2021 (73933a3) x86_64
    [    35.518] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.18-lp152.66-default root=UUID=8c92f2df-8c5b-45cf-ae2c-0a32b1b284af splash=silent resume=/dev/mapper/cr_swap mitigations=auto quiet
    [    35.518] Build Date: 04 March 2021  12:00:00PM
    [    35.518]  
    [    35.519] Current version of pixman: 0.34.0
    [    35.519]     Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
    [    35.519] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [    35.519] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr  3 21:02:36 2021
    [    35.521] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [    35.521] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [    35.528] (==) ServerLayout "Layout0"
    [    35.528] (**) |-->Screen "Screen0" (0)
    [    35.528] (**) |   |-->Monitor "Monitor0"
    [    35.528] (**) |   |-->Device "Device0"
    [    35.528] (**) |-->Screen "Screen1" (1)
    [    35.528] (**) |   |-->Monitor "Monitor1"
    [    35.529] (**) |   |-->Device "Device1"
    [    35.529] (**) |-->Screen "Screen2" (2)
    [    35.529] (**) |   |-->Monitor "Monitor2"
    [    35.529] (**) |   |-->Device "Device2"
    [    35.529] (**) |-->Screen "Screen3" (3)
    [    35.529] (**) |   |-->Monitor "Monitor3"
    [    35.529] (**) |   |-->Device "Device3"
    [    35.529] (**) |-->Input Device "Keyboard0"
    [    35.529] (**) |-->Input Device "Mouse0"
    [    35.529] (**) Option "Xinerama" "1"
    [    35.529] (==) Automatically adding devices
    [    35.529] (==) Automatically enabling devices
    [    35.529] (==) Automatically adding GPU devices
    [    35.529] (**) Xinerama: enabled
    [    35.530] (==) Max clients allowed: 256, resource mask: 0x1fffff
    [    35.542] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
    [    35.542]     Entry deleted from font path.
    [    35.544] (==) FontPath set to:
        /usr/share/fonts/misc:unscaled,
        /usr/share/fonts/Type1/,
        /usr/share/fonts/100dpi:unscaled,
        /usr/share/fonts/75dpi:unscaled,
        /usr/share/fonts/ghostscript/,
        /usr/share/fonts/cyrillic:unscaled,
        /usr/share/fonts/truetype/,
        built-ins
    [    35.544] (==) ModulePath set to "/usr/lib64/xorg/modules"
    [    35.544] (WW) Ignoring unrecognized extension "XFree86-DGA"
    [    35.544] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [    35.544] (WW) Disabling Keyboard0
    [    35.544] (WW) Disabling Mouse0
    [    35.544] (II) Loader magic: 0x561c4becdd20
    [    35.544] (II) Module ABI versions:
    [    35.544]     X.Org ANSI C Emulation: 0.4
    [    35.544]     X.Org Video Driver: 24.0
    [    35.544]     X.Org XInput driver : 24.1
    [    35.544]     X.Org Server Extension : 10.0
    [    35.546] (++) using VT number 7
    
    [    35.546] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
    [    35.546] (II) xfree86: Adding drm device (/dev/dri/card0)
    [    35.546] (II) xfree86: Adding drm device (/dev/dri/card1)
    [    35.555] (--) PCI:*(2@0:0:0) 10de:1200:1043:8390 rev 161, Mem @ 0xf4000000/33554432, 0xc8000000/134217728, 0xd0000000/67108864, I/O @ 0x0000ac00/128, BIOS @ 0x????????/131072
    [    35.555] (--) PCI: (3@0:0:0) 10de:1200:1043:8390 rev 161, Mem @ 0xf8000000/33554432, 0xd8000000/134217728, 0xd4000000/67108864, I/O @ 0x0000bc00/128, BIOS @ 0x????????/524288
    [    35.555] (II) LoadModule: "glx"
    [    35.566] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
    [    35.756] (II) Module glx: vendor="NVIDIA Corporation"
    [    35.756]     compiled for 4.0.2, module version = 1.0.0
    [    35.756]     Module class: X.Org Server Extension
    [    35.760] (II) NVIDIA GLX Module  390.141  Mon Dec 28 16:17:40 UTC 2020
    [    35.766] (II) LoadModule: "nvidia"
    [    35.767] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
    [    35.802] (II) Module nvidia: vendor="NVIDIA Corporation"
    [    35.802]     compiled for 4.0.2, module version = 1.0.0
    [    35.802]     Module class: X.Org Video Driver
    [    35.808] (II) NVIDIA dlloader X Driver  390.141  Mon Dec 28 16:20:32 UTC 2020
    [    35.808] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [    36.009] (II) Loading sub module "fb"
    [    36.009] (II) LoadModule: "fb"
    [    36.011] (II) Loading /usr/lib64/xorg/modules/libfb.so
    [    36.014] (II) Module fb: vendor="X.Org Foundation"
    [    36.014]     compiled for 1.20.3, module version = 1.0.0
    [    36.014]     ABI class: X.Org ANSI C Emulation, version 0.4
    [    36.014] (II) Loading sub module "wfb"
    [    36.014] (II) LoadModule: "wfb"
    [    36.014] (II) Loading /usr/lib64/xorg/modules/libwfb.so
    [    36.017] (II) Module wfb: vendor="X.Org Foundation"
    [    36.017]     compiled for 1.20.3, module version = 1.0.0
    [    36.017]     ABI class: X.Org ANSI C Emulation, version 0.4
    [    36.017] (II) Loading sub module "ramdac"
    [    36.017] (II) LoadModule: "ramdac"
    [    36.017] (II) Module "ramdac" already built-in
    [    36.018] (WW) NVIDIA: The Composite and Xinerama extensions are both enabled, which
    [    36.018] (WW) NVIDIA:     is an unsupported configuration.  The driver will continue
    [    36.018] (WW) NVIDIA:     to load, but may behave strangely.
    [    36.018] (WW) NVIDIA: Xinerama is enabled, so RandR has likely been disabled by the
    [    36.018] (WW) NVIDIA:     X server.
    [    36.018] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [    36.018] (==) NVIDIA(0): RGB weight 888
    [    36.018] (==) NVIDIA(0): Default visual is TrueColor
    [    36.018] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [    36.018] (**) NVIDIA(0): Option "Stereo" "0"
    [    36.018] (**) NVIDIA(0): Option "nvidiaXineramaInfoOrder" "DFP-0"
    [    36.018] (**) NVIDIA(0): Option "SLI" "Off"
    [    36.018] (**) NVIDIA(0): Option "MultiGPU" "Off"
    [    36.018] (**) NVIDIA(0): Option "BaseMosaic" "off"
    [    36.018] (**) NVIDIA(0): Stereo disabled by request
    [    36.018] (**) NVIDIA(0): NVIDIA SLI disabled.
    [    36.018] (**) NVIDIA(0): NVIDIA Multi-GPU disabled.
    [    36.018] (**) NVIDIA(0): Option "MetaModes" "DVI-I-2: nvidia-auto-select +0+0"
    [    36.018] (**) NVIDIA(3): Option "MetaModes" "DVI-I-3: nvidia-auto-select +0+0"
    [    36.018] (**) NVIDIA(0): Enabling 2D acceleration
    [    36.816] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:2:0:0
    [    36.816] (--) NVIDIA(0):     CRT-0
    [    36.816] (--) NVIDIA(0):     CRT-1
    [    36.816] (--) NVIDIA(0):     DFP-0 (boot)
    [    36.816] (--) NVIDIA(0):     DFP-1
    [    36.816] (--) NVIDIA(0):     DFP-2
    [    36.818] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:2:0:0 (GPU-0)
    [    36.818] (--) NVIDIA(0): Memory: 1048576 kBytes
    [    36.818] (--) NVIDIA(0): VideoBIOS: 70.24.21.00.02
    [    36.818] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [    36.834] (--) NVIDIA(GPU-0): CRT-0: disconnected
    [    36.834] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
    [    36.834] (--) NVIDIA(GPU-0): 
    [    36.867] (--) NVIDIA(GPU-0): CRT-1: disconnected
    [    36.867] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
    [    36.867] (--) NVIDIA(GPU-0): 
    [    36.900] (--) NVIDIA(GPU-0): LG Electronics 24EB23 (DFP-0): connected
    [    36.900] (--) NVIDIA(GPU-0): LG Electronics 24EB23 (DFP-0): Internal TMDS
    [    36.900] (--) NVIDIA(GPU-0): LG Electronics 24EB23 (DFP-0): 330.0 MHz maximum pixel clock
    [    36.900] (--) NVIDIA(GPU-0): 
    [    36.900] (--) NVIDIA(GPU-0): DFP-1: disconnected
    [    36.900] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
    [    36.900] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
    [    36.900] (--) NVIDIA(GPU-0): 
    [    36.965] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-2): connected
    [    36.965] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-2): Internal TMDS
    [    36.965] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-2): 330.0 MHz maximum pixel clock
    [    36.965] (--) NVIDIA(GPU-0): 
    [    36.969] (II) NVIDIA(0): Validated MetaModes:
    [    36.969] (II) NVIDIA(0):     "DVI-I-2:nvidia-auto-select+0+0"
    [    36.969] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
    [    36.974] (--) NVIDIA(0): DPI set to (93, 92); computed from "UseEdidDpi" X config
    [    36.974] (--) NVIDIA(0):     option
    [    36.974] (**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
    [    36.974] (==) NVIDIA(1): RGB weight 888
    [    36.974] (==) NVIDIA(1): Default visual is TrueColor
    [    36.974] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
    [    36.974] (**) NVIDIA(1): Option "Stereo" "0"
    [    36.974] (**) NVIDIA(1): Option "SLI" "Off"
    [    36.974] (**) NVIDIA(1): Option "MultiGPU" "Off"
    [    36.974] (**) NVIDIA(1): Option "BaseMosaic" "off"
    [    36.974] (**) NVIDIA(1): Stereo disabled by request
    [    36.974] (**) NVIDIA(1): NVIDIA SLI disabled.
    [    36.974] (**) NVIDIA(1): NVIDIA Multi-GPU disabled.
    [    36.974] (**) NVIDIA(1): Option "MetaModes" "DVI-I-2: nvidia-auto-select +0+0"
    [    36.974] (**) NVIDIA(2): Option "MetaModes" "DVI-I-3: nvidia-auto-select +0+0"
    [    36.974] (**) NVIDIA(1): Enabling 2D acceleration
    [    37.990] (--) NVIDIA(0): Valid display device(s) on GPU-1 at PCI:3:0:0
    [    37.990] (--) NVIDIA(0):     CRT-0
    [    37.990] (--) NVIDIA(0):     CRT-1
    [    37.990] (--) NVIDIA(0):     DFP-0 (boot)
    [    37.990] (--) NVIDIA(0):     DFP-1
    [    37.990] (--) NVIDIA(0):     DFP-2
    [    37.992] (II) NVIDIA(1): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:3:0:0 (GPU-1)
    [    37.992] (--) NVIDIA(1): Memory: 1048576 kBytes
    [    37.992] (--) NVIDIA(1): VideoBIOS: 70.24.2e.00.02
    [    37.992] (II) NVIDIA(1): Detected PCI Express Link width: 16X

  9. #9

    Default Xorg.0.log 2/2

    Code:
    [    37.999] (--) NVIDIA(GPU-1): CRT-0: disconnected
    [    37.999] (--) NVIDIA(GPU-1): CRT-0: 400.0 MHz maximum pixel clock
    [    37.999] (--) NVIDIA(GPU-1): 
    [    38.013] (--) NVIDIA(GPU-1): CRT-1: disconnected
    [    38.013] (--) NVIDIA(GPU-1): CRT-1: 400.0 MHz maximum pixel clock
    [    38.013] (--) NVIDIA(GPU-1): 
    [    38.028] (--) NVIDIA(GPU-1): LG Electronics 24EB23 (DFP-0): connected
    [    38.028] (--) NVIDIA(GPU-1): LG Electronics 24EB23 (DFP-0): Internal TMDS
    [    38.028] (--) NVIDIA(GPU-1): LG Electronics 24EB23 (DFP-0): 330.0 MHz maximum pixel clock
    [    38.028] (--) NVIDIA(GPU-1): 
    [    38.028] (--) NVIDIA(GPU-1): DFP-1: disconnected
    [    38.028] (--) NVIDIA(GPU-1): DFP-1: Internal TMDS
    [    38.028] (--) NVIDIA(GPU-1): DFP-1: 165.0 MHz maximum pixel clock
    [    38.028] (--) NVIDIA(GPU-1): 
    [    38.056] (--) NVIDIA(GPU-1): Samsung SyncMaster (DFP-2): connected
    [    38.056] (--) NVIDIA(GPU-1): Samsung SyncMaster (DFP-2): Internal TMDS
    [    38.056] (--) NVIDIA(GPU-1): Samsung SyncMaster (DFP-2): 330.0 MHz maximum pixel clock
    [    38.056] (--) NVIDIA(GPU-1): 
    [    38.060] (II) NVIDIA(1): Validated MetaModes:
    [    38.060] (II) NVIDIA(1):     "DVI-I-2:nvidia-auto-select+0+0"
    [    38.060] (II) NVIDIA(1): Virtual screen size determined to be 1920 x 1200
    [    38.065] (--) NVIDIA(1): DPI set to (93, 92); computed from "UseEdidDpi" X config
    [    38.065] (--) NVIDIA(1):     option
    [    38.065] (**) NVIDIA(2): Depth 24, (--) framebuffer bpp 32
    [    38.065] (==) NVIDIA(2): RGB weight 888
    [    38.065] (==) NVIDIA(2): Default visual is TrueColor
    [    38.065] (==) NVIDIA(2): Using gamma correction (1.0, 1.0, 1.0)
    [    38.065] (**) NVIDIA(2): Option "Stereo" "0"
    [    38.065] (**) NVIDIA(2): Option "nvidiaXineramaInfoOrder" "DFP-2"
    [    38.065] (**) NVIDIA(2): Option "SLI" "Off"
    [    38.065] (**) NVIDIA(2): Option "MultiGPU" "Off"
    [    38.065] (**) NVIDIA(2): Option "BaseMosaic" "off"
    [    38.065] (**) NVIDIA(2): Stereo disabled by request
    [    38.065] (**) NVIDIA(2): NVIDIA SLI disabled.
    [    38.065] (**) NVIDIA(2): NVIDIA Multi-GPU disabled.
    [    38.065] (II) NVIDIA(2): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:3:0:0 (GPU-1)
    [    38.065] (--) NVIDIA(2): Memory: 1048576 kBytes
    [    38.065] (--) NVIDIA(2): VideoBIOS: 70.24.2e.00.02
    [    38.065] (II) NVIDIA(2): Detected PCI Express Link width: 16X
    [    38.069] (II) NVIDIA(2): Validated MetaModes:
    [    38.070] (II) NVIDIA(2):     "DVI-I-3:nvidia-auto-select+0+0"
    [    38.070] (II) NVIDIA(2): Virtual screen size determined to be 1920 x 1200
    [    38.075] (--) NVIDIA(2): DPI set to (93, 95); computed from "UseEdidDpi" X config
    [    38.075] (--) NVIDIA(2):     option
    [    38.075] (**) NVIDIA(3): Depth 24, (--) framebuffer bpp 32
    [    38.075] (==) NVIDIA(3): RGB weight 888
    [    38.075] (==) NVIDIA(3): Default visual is TrueColor
    [    38.075] (==) NVIDIA(3): Using gamma correction (1.0, 1.0, 1.0)
    [    38.075] (**) NVIDIA(3): Option "Stereo" "0"
    [    38.075] (**) NVIDIA(3): Option "nvidiaXineramaInfoOrder" "DFP-2"
    [    38.075] (**) NVIDIA(3): Option "SLI" "Off"
    [    38.075] (**) NVIDIA(3): Option "MultiGPU" "Off"
    [    38.075] (**) NVIDIA(3): Option "BaseMosaic" "off"
    [    38.075] (**) NVIDIA(3): Stereo disabled by request
    [    38.075] (**) NVIDIA(3): NVIDIA SLI disabled.
    [    38.075] (**) NVIDIA(3): NVIDIA Multi-GPU disabled.
    [    38.075] (II) NVIDIA(3): NVIDIA GPU GeForce GTX 560 Ti (GF114) at PCI:2:0:0 (GPU-0)
    [    38.075] (--) NVIDIA(3): Memory: 1048576 kBytes
    [    38.075] (--) NVIDIA(3): VideoBIOS: 70.24.21.00.02
    [    38.075] (II) NVIDIA(3): Detected PCI Express Link width: 16X
    [    38.079] (II) NVIDIA(3): Validated MetaModes:
    [    38.079] (II) NVIDIA(3):     "DVI-I-3:nvidia-auto-select+0+0"
    [    38.079] (II) NVIDIA(3): Virtual screen size determined to be 1920 x 1200
    [    38.085] (--) NVIDIA(3): DPI set to (93, 95); computed from "UseEdidDpi" X config
    [    38.085] (--) NVIDIA(3):     option
    [    38.086] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
    [    38.086] (II) NVIDIA:     access.
    [    38.088] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [    38.088] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
    [    38.088] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
    [    38.088] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
    [    38.088] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
    [    38.088] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
    [    38.088] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
    [    38.088] (II) NVIDIA(0):     Config Options in the README.
    [    38.111] (II) NVIDIA(0): Setting mode "DVI-I-2:nvidia-auto-select+0+0"
    [    38.163] (==) NVIDIA(0): Disabling shared memory pixmaps
    [    38.163] (==) NVIDIA(0): Backing store enabled
    [    38.163] (==) NVIDIA(0): Silken mouse enabled
    [    38.163] (**) NVIDIA(0): DPMS enabled
    [    38.163] (II) Loading sub module "dri2"
    [    38.163] (II) LoadModule: "dri2"
    [    38.163] (II) Module "dri2" already built-in
    [    38.163] (II) NVIDIA(0): [DRI2] Setup complete
    [    38.163] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
    [    38.163] (WW) NVIDIA(0): Not registering RandR
    [    38.166] (II) NVIDIA(1): ACPI: failed to connect to the ACPI event daemon; the daemon
    [    38.166] (II) NVIDIA(1):     may not be running or the "AcpidSocketPath" X
    [    38.166] (II) NVIDIA(1):     configuration option may not be set correctly.  When the
    [    38.166] (II) NVIDIA(1):     ACPI event daemon is available, the NVIDIA X driver will
    [    38.166] (II) NVIDIA(1):     try to use it to receive ACPI event notifications.  For
    [    38.166] (II) NVIDIA(1):     details, please see the "ConnectToAcpid" and
    [    38.166] (II) NVIDIA(1):     "AcpidSocketPath" X configuration options in Appendix B: X
    [    38.166] (II) NVIDIA(1):     Config Options in the README.
    [    38.189] (II) NVIDIA(1): Setting mode "DVI-I-2:nvidia-auto-select+0+0"
    [    38.213] (==) NVIDIA(1): Disabling shared memory pixmaps
    [    38.213] (==) NVIDIA(1): Backing store enabled
    [    38.213] (==) NVIDIA(1): Silken mouse enabled
    [    38.214] (**) NVIDIA(1): DPMS enabled
    [    38.214] (II) Loading sub module "dri2"
    [    38.214] (II) LoadModule: "dri2"
    [    38.214] (II) Module "dri2" already built-in
    [    38.214] (II) NVIDIA(1): [DRI2] Setup complete
    [    38.214] (II) NVIDIA(1): [DRI2]   VDPAU driver: nvidia
    [    38.214] (WW) NVIDIA(1): Not registering RandR
    [    38.216] (II) NVIDIA(2): ACPI: failed to connect to the ACPI event daemon; the daemon
    [    38.216] (II) NVIDIA(2):     may not be running or the "AcpidSocketPath" X
    [    38.216] (II) NVIDIA(2):     configuration option may not be set correctly.  When the
    [    38.216] (II) NVIDIA(2):     ACPI event daemon is available, the NVIDIA X driver will
    [    38.216] (II) NVIDIA(2):     try to use it to receive ACPI event notifications.  For
    [    38.216] (II) NVIDIA(2):     details, please see the "ConnectToAcpid" and
    [    38.216] (II) NVIDIA(2):     "AcpidSocketPath" X configuration options in Appendix B: X
    [    38.216] (II) NVIDIA(2):     Config Options in the README.
    [    38.238] (II) NVIDIA(2): Setting mode "DVI-I-3:nvidia-auto-select+0+0"
    [    38.330] (==) NVIDIA(2): Disabling shared memory pixmaps
    [    38.330] (==) NVIDIA(2): Backing store enabled
    [    38.330] (==) NVIDIA(2): Silken mouse enabled
    [    38.330] (**) NVIDIA(2): DPMS enabled
    [    38.330] (II) Loading sub module "dri2"
    [    38.330] (II) LoadModule: "dri2"
    [    38.330] (II) Module "dri2" already built-in
    [    38.330] (II) NVIDIA(2): [DRI2] Setup complete
    [    38.330] (II) NVIDIA(2): [DRI2]   VDPAU driver: nvidia
    [    38.330] (WW) NVIDIA(2): Not registering RandR
    [    38.333] (II) NVIDIA(3): ACPI: failed to connect to the ACPI event daemon; the daemon
    [    38.333] (II) NVIDIA(3):     may not be running or the "AcpidSocketPath" X
    [    38.333] (II) NVIDIA(3):     configuration option may not be set correctly.  When the
    [    38.333] (II) NVIDIA(3):     ACPI event daemon is available, the NVIDIA X driver will
    [    38.333] (II) NVIDIA(3):     try to use it to receive ACPI event notifications.  For
    [    38.333] (II) NVIDIA(3):     details, please see the "ConnectToAcpid" and
    [    38.333] (II) NVIDIA(3):     "AcpidSocketPath" X configuration options in Appendix B: X
    [    38.333] (II) NVIDIA(3):     Config Options in the README.
    [    38.355] (II) NVIDIA(3): Setting mode "DVI-I-3:nvidia-auto-select+0+0"
    [    38.458] (==) NVIDIA(3): Disabling shared memory pixmaps
    [    38.458] (==) NVIDIA(3): Backing store enabled
    [    38.458] (==) NVIDIA(3): Silken mouse enabled
    [    38.458] (**) NVIDIA(3): DPMS enabled
    [    38.458] (II) Loading sub module "dri2"
    [    38.458] (II) LoadModule: "dri2"
    [    38.458] (II) Module "dri2" already built-in
    [    38.458] (II) NVIDIA(3): [DRI2] Setup complete
    [    38.458] (II) NVIDIA(3): [DRI2]   VDPAU driver: nvidia
    [    38.458] (WW) NVIDIA(3): Not registering RandR
    [    38.458] (II) Initializing extension Generic Event Extension
    [    38.458] (II) Initializing extension SHAPE
    [    38.458] (II) Initializing extension MIT-SHM
    [    38.458] (II) Initializing extension XInputExtension
    [    38.458] (II) Initializing extension XTEST
    [    38.458] (II) Initializing extension BIG-REQUESTS
    [    38.459] (II) Initializing extension SYNC
    [    38.459] (II) Initializing extension XKEYBOARD
    [    38.459] (II) Initializing extension XC-MISC
    [    38.459] (II) Initializing extension SECURITY
    [    38.459] (II) Initializing extension XINERAMA
    [    38.459] (II) Initializing extension XFIXES
    [    38.459] (II) Initializing extension RENDER
    [    38.459] (II) Initializing extension RANDR
    [    38.459] (II) Initializing extension COMPOSITE
    [    38.459] (II) Initializing extension DAMAGE
    [    38.460] (II) Initializing extension MIT-SCREEN-SAVER
    [    38.460] (II) Initializing extension DOUBLE-BUFFER
    [    38.460] (II) Initializing extension RECORD
    [    38.460] (II) Initializing extension DPMS
    [    38.460] (II) Initializing extension Present
    [    38.460] (II) Initializing extension DRI3
    [    38.460] (II) Initializing extension X-Resource
    [    38.460] (II) Initializing extension XVideo
    [    38.460] (II) Initializing extension XVideo-MotionCompensation
    [    38.460] (II) Initializing extension XFree86-VidModeExtension
    [    38.460] (II) Initializing extension XFree86-DGA
    [    38.460] (II) Initializing extension XFree86-DRI
    [    38.460] (II) Initializing extension DRI2
    [    38.460] (II) Initializing extension GLX
    [    38.460] (II) Initializing extension GLX
    [    38.460] (II) Indirect GLX disabled.
    [    38.460] (II) Initializing extension NV-GLX
    [    38.461] (II) Initializing extension NV-CONTROL
    [    38.708] (EE) 
    [    38.708] (EE) Backtrace:
    [    38.708] (EE) 0: /usr/bin/X (xorg_backtrace+0x65) [0x561c4bc41585]
    [    38.708] (EE) 1: /usr/bin/X (0x561c4ba8f000+0x1b6259) [0x561c4bc45259]
    [    38.708] (EE) 2: /lib64/libpthread.so.0 (0x7f917bfbb000+0x132d0) [0x7f917bfce2d0]
    [    38.708] (EE) 3: /lib64/libc.so.6 (gsignal+0x110) [0x7f917bc39420]
    [    38.708] (EE) 4: /lib64/libc.so.6 (abort+0x151) [0x7f917bc3aa01]
    [    38.708] (EE) 5: /lib64/libc.so.6 (0x7f917bc00000+0x31a1a) [0x7f917bc31a1a]
    [    38.708] (EE) 6: /lib64/libc.so.6 (0x7f917bc00000+0x31a92) [0x7f917bc31a92]
    [    38.708] (EE) 7: /usr/bin/X (0x561c4ba8f000+0x41d09) [0x561c4bad0d09]
    [    38.708] (EE) 8: /usr/bin/X (0x561c4ba8f000+0x9c568) [0x561c4bb2b568]
    [    38.708] (EE) 9: /usr/bin/X (_CallCallbacks+0x34) [0x561c4baf1374]
    [    38.708] (EE) 10: /usr/bin/X (0x561c4ba8f000+0x60fc2) [0x561c4baeffc2]
    [    38.708] (EE) 11: /lib64/libc.so.6 (__libc_start_main+0xea) [0x7f917bc2434a]
    [    38.708] (EE) 12: /usr/bin/X (_start+0x2a) [0x561c4bad9cba]
    [    38.708] (EE) 
    [    38.708] (EE) 
    Fatal server error:
    [    38.708] (EE) Caught signal 6 (Aborted). Server aborting
    [    38.708] (EE) 
    [    38.708] (EE) 
    Please consult the The X.Org Foundation support 
         at http://wiki.x.org
     for help. 
    [    38.708] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [    38.708] (EE) 
    [    39.606] (EE) Server terminated with error (1). Closing log file.

  10. #10

    Default Re: Xorg fails to start with 4 monitors (nvidia)

    Quote Originally Posted by malcolmlewis View Post
    Hi
    The G04 rpms should work? The other option is to try the hard way....

    I would have thought the Desktop takes care of any configuration, I've not created an xorg file in a long time..... I use the GNOME DE it takes care of any monitor configuration and layout (monitors.xml).
    Yes they do work, but only for two displays on 1 GPU. I haven't found a way to get the other two displays on the second GPU enabled. The nvidia applet can handle them just fine but the only option it offers is writing an xorg.conf file.

    @OP, have you created a test user and logged in as the test user, do things start to function?
    I don't fully understand this instruction. I get automatically logged in as the user I created during installation. Should I create another user?

Page 1 of 4 123 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •