Results 1 to 9 of 9

Thread: unstable wifi connection using wicked

  1. 19-Jan-2021, 03:00 #1
    MakeTopSite
    MakeTopSite jest offline Explorer Penguin
    Join Date
    Sep 2019
    Posts
    156

    Default unstable wifi connection using wicked

    Can't establish new connection (web browser, mpv was used) sometime. Active connection are ok. Restart of wicked is needed.

    only this was in log:
    Code:
    Jan 18 18:00:00  dbus-daemon[1075]: [system] Successfully activated service 'org.opensuse.Snapper'
Jan 18 18:00:00  dbus-daemon[1075]: [system] Activating service name='org.opensuse.Snapper' requested by ':1.>
Jan 18 18:00:00  systemd[1]: Started Timeline of Snapper Snapshots.
    Code:
    Network controller: Intel Corporation Centrino Wireless-N 135 (rev c4)
    Subsystem: Intel Corporation Centrino Wireless-N 135 BGN
    Flags: bus master, fast devsel, latency 0, IRQ 34
    Memory at f7c00000 (64-bit, non-prefetchable) [size=8K]
    Capabilities: [c8] Power Management version 3
    Capabilities: [100] Advanced Error Reporting
    Kernel driver in use: iwlwifi
    Kernel modules: iwlwifi
    Other device connected to same wifi AP works fine.

    Anyone know please how to make connection more stable ? It has never happened in Leap 15.1 and earlier AFAIR.
    Reply With Quote Reply With Quote
  2. 21-Jan-2021, 22:39 #2
    tsu2's Avatar
    tsu2
    tsu2 jest offline Flux Capacitor Penguin
    Join Date
    Jun 2008
    Location
    San Diego, Ca, USA
    Posts
    13,175
    Blog Entries
    2

    Default Re: unstable wifi connection using wicked

    Are you referencing the "mpv" media player?
    Are you trying to connect to a video stream?

    What error displays using any particular app? If you launch from a command line console, you may see an error.
    If your graphical application has already launched and fails in any way, there is usually some way an error displays, eg in a web browser in the bottom left margin (if you have that part of the web browser enabled). Of course, if you have a problem using a particular web browser, you'll have to identify which one you're using.

    And, if you are invoking your application after you login and started your user session,
    - Did you verify your network connectivity using the standard tools ping and route??
    - You can view any events and errors in real time if you open a console before you try to connect using your application, run the following command and leave it open
    Code:
    journalctl -f
    TSU
    Beginner Wiki Quickstart - https://en.opensuse.org/User:Tsu2/Quickstart_Wiki
    Solved a problem recently? Create a wiki page for future personal reference!
    Learn something new?
    Attended a computing event?
    Post and Share!
    Reply With Quote Reply With Quote
  3. 21-Jan-2021, 22:52 #3
    deano_ferrari
    deano_ferrari is online now Global Moderator
    Join Date
    Jun 2008
    Location
    Auckland, NZ
    Posts
    22,594
    Blog Entries
    1

    Default Re: unstable wifi connection using wicked

    You may be impacted by this bug...
    https://bugzilla.opensuse.org/show_bug.cgi?id=1176649
    openSUSE Leap 15.2; KDE Plasma 5
    Reply With Quote Reply With Quote
  4. 22-Jan-2021, 05:48 #4
    MakeTopSite
    MakeTopSite jest offline Explorer Penguin
    Join Date
    Sep 2019
    Posts
    156

    Default Re: unstable wifi connection using wicked

    Quote Originally Posted by tsu2 View Post
    Are you referencing the "mpv" media player?
    Are you trying to connect to a video stream?

    What error displays using any particular app? If you launch from a command line console, you may see an error.
    If your graphical application has already launched and fails in any way, there is usually some way an error displays, eg in a web browser in the bottom left margin (if you have that part of the web browser enabled). Of course, if you have a problem using a particular web browser, you'll have to identify which one you're using.

    And, if you are invoking your application after you login and started your user session,
    - Did you verify your network connectivity using the standard tools ping and route??
    - You can view any events and errors in real time if you open a console before you try to connect using your application, run the following command and leave it open
    Code:
    journalctl -f
    TSU
    Yes
    No, mp3 audio.
    All web browsers I tried are affected.
    I'm sorry no other info in journalctl than that I posted in 1st post.

    Code:
    zypper info a
Download (curl) error for 'https://download.nvidia.com/opensuse/leap/15.2/repodata/repomd.xml':
Error code: Connection failed
Error message: Could not resolve host: download.nvidia.com

Abort, retry, ignore? [a/r/i/...? shows all options] (a):
    Palemoon web browser:
    Code:
    Server not found

Pale Moon cannot find the server at start.palemoon.org.

please check the address syntax (enter ww.exemple.com instead of www.exemple.com for example).
If navigation is not possible on any site, check the connection to the computer network.
If the computer or network is protected by a firewall or proxy, ensure that Pale Moon has permission to access the Internet.
    Firefox
    Code:
    Hmm. We’re having trouble finding that site.

We can’t connect to the server at web.icq.com.

If that address is correct, here are three other things you can try:

    Try again later.
    Check your network connection.
    If you are connected but behind a firewall, check that Firefox has permission to access the Web.
    chromium
    Code:
    No internet
Try:

Checking the network cables, modem, and router
Reconnecting to Wi-Fi
DNS_PROBE_FINISHED_NO_INTERNET
    java app
    Code:
    java.net.UnknownHostException: somewww.com
    at java.base/java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:220)
    at java.base/java.net.SocksSocketImpl.connect(SocksSocketImpl.java:403)
    at java.base/java.net.Socket.connect(Socket.java:609)
    at java.base/sun.security.ssl.SSLSocketImpl.connect(SSLSocketImpl.java:289)
    at java.base/sun.security.ssl.BaseSSLSocketImpl.connect(BaseSSLSocketImpl.java:173)
    at java.base/sun.net.NetworkClient.doConnect(NetworkClient.java:182)
    at java.base/sun.net.www.http.HttpClient.openServer(HttpClient.java:474)
    at java.base/sun.net.www.http.HttpClient.openServer(HttpClient.java:569)
    at java.base/sun.net.www.protocol.https.HttpsClient.<init>(HttpsClient.java:265)
    at java.base/sun.net.www.protocol.https.HttpsClient.New(HttpsClient.java:372)
    at java.base/sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.getNewHttpClient(AbstractDelegateHttpsURLConnection.java:191)
    at java.base/sun.net.www.protocol.http.HttpURLConnection.plainConnect0(HttpURLConnection.java:1187)
    at java.base/sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:1081)
    at java.base/sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(AbstractDelegateHttpsURLConnection.java:177)
    at java.base/sun.net.www.protocol.http.HttpURLConnection.getInputStream0(HttpURLConnection.java:1592)
    at java.base/sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1520)
    at java.base/sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(HttpsURLConnectionImpl.java:250)
    at java.base/java.net.URL.openStream(URL.java:1140)
    at webdownloader.Main.Load(Main.java:200)
    at webdownloader.Main.access$2(Main.java:190)
    at webdownloader.Main$2.mouseClicked(Main.java:98)
    at java.desktop/java.awt.AWTEventMulticaster.mouseClicked(AWTEventMulticaster.java:278)
    at java.desktop/java.awt.Component.processMouseEvent(Component.java:6638)
    at java.desktop/javax.swing.JComponent.processMouseEvent(JComponent.java:3342)
    at java.desktop/java.awt.Component.processEvent(Component.java:6400)
    at java.desktop/java.awt.Container.processEvent(Container.java:2263)
    at java.desktop/java.awt.Component.dispatchEventImpl(Component.java:5011)
    at java.desktop/java.awt.Container.dispatchEventImpl(Container.java:2321)
    at java.desktop/java.awt.Component.dispatchEvent(Component.java:4843)
    at java.desktop/java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4918)
    at java.desktop/java.awt.LightweightDispatcher.processMouseEvent(Container.java:4556)
    at java.desktop/java.awt.LightweightDispatcher.dispatchEvent(Container.java:4488)
    at java.desktop/java.awt.Container.dispatchEventImpl(Container.java:2307)
    at java.desktop/java.awt.Window.dispatchEventImpl(Window.java:2772)
    at java.desktop/java.awt.Component.dispatchEvent(Component.java:4843)
    at java.desktop/java.awt.EventQueue.dispatchEventImpl(EventQueue.java:772)
    at java.desktop/java.awt.EventQueue$4.run(EventQueue.java:721)
    at java.desktop/java.awt.EventQueue$4.run(EventQueue.java:715)
    at java.base/java.security.AccessController.doPrivileged(Native Method)
    at java.base/java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(ProtectionDomain.java:85)
    at java.base/java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(ProtectionDomain.java:95)
    at java.desktop/java.awt.EventQueue$5.run(EventQueue.java:745)
    at java.desktop/java.awt.EventQueue$5.run(EventQueue.java:743)
    at java.base/java.security.AccessController.doPrivileged(Native Method)
    at java.base/java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(ProtectionDomain.java:85)
    at java.desktop/java.awt.EventQueue.dispatchEvent(EventQueue.java:742)
    at java.desktop/java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:203)
    at java.desktop/java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:124)
    at java.desktop/java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:113)
    at java.desktop/java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:109)
    at java.desktop/java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:101)
    at java.desktop/java.awt.EventDispatchThread.run(EventDispatchThread.java:90)
    Code:
    ping maketopsite.com
ping: maketopsite.com: Temporary failure in name resolution
    Code:
    lynx maketopsite.com

Looking up maketopsite.com first
Looking up www.maketopsite.com.com, guessing...
Looking up www.maketopsite.com.edu, guessing...
Looking up www.maketopsite.com.net, guessing...
Looking up www.maketopsite.com.org, guessing...
Can't Access `file://localhost/run/media/__/____/maketopsite.com'
Alert!: Unable to access document.

lynx: Can't access startfile
    Code:
    mpv http://___.com/some_audio.mp3
[ffmpeg] tcp: Failed to resolve hostname ___.com: Temporary failure in name resolution
Failed to open http://___.com/some_audio.mp3.
[ytdl_hook] ERROR: Unable to download webpage: <urlopen error [Errno -3] Temporary failure in name resolution> (caused by URLError(gaierror(-3, 'Temporary failure in name resolution'),)) 
[ytdl_hook] youtube-dl failed: unexpected error ocurred
    Reply With Quote Reply With Quote
  5. 22-Jan-2021, 05:58 #5
    MakeTopSite
    MakeTopSite jest offline Explorer Penguin
    Join Date
    Sep 2019
    Posts
    156

    Default Re: unstable wifi connection using wicked

    Quote Originally Posted by deano_ferrari View Post
    You may be impacted by this bug...
    https://bugzilla.opensuse.org/show_bug.cgi?id=1176649
    Thank you.

    Differences are:

    I use wicked.
    It does not happen every day.
    No info in dmesg, journalctl.
    No need to reboot Leap.
    Reply With Quote Reply With Quote
  6. 22-Jan-2021, 06:07 #6
    MakeTopSite
    MakeTopSite jest offline Explorer Penguin
    Join Date
    Sep 2019
    Posts
    156

    Default Re: unstable wifi connection using wicked

    It looks like it has "repaired" itself now.

    Code:
    journalctl -r
Jan 22 13:57:12  systemd[1]: Started One time sync configured by YaST.
Jan 22 13:57:12  yast-timesync[30935]: 2021-01-22T12:57:12Z chronyd exiting
Jan 22 13:57:12  yast-timesync[30935]: 2021-01-22T12:57:12Z System clock wrong by 0.003182 seconds (step)
Jan 22 13:53:16  yast-timesync[30935]: 2021-01-22T12:53:16Z Frequency 26.164 +/- 0.084 ppm read from /var/lib/chrony/drift
Jan 22 13:53:16  yast-timesync[30935]: 2021-01-22T12:53:16Z chronyd version 4.0 starting (+CMDMON +NTP +REFCLOCK +RTC +PRIVDROP -SCFILTER +SIG>
Jan 22 13:53:16  systemd[1]: Starting One time sync configured by YaST...
    Code:
    dmesg
[25565.615346] nvidia 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[25565.615739] nvidia 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[25568.292076] nvidia 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[25623.642585] nvidia 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[25623.642825] nvidia 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[25623.643173] nvidia 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[25626.319067] nvidia 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[25678.002755] nvidia 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[25678.002761] nvidia 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[25680.679698] nvidia 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s
    Reply With Quote Reply With Quote
  7. 22-Jan-2021, 12:08 #7
    MakeTopSite
    MakeTopSite jest offline Explorer Penguin
    Join Date
    Sep 2019
    Posts
    156

    Default Re: unstable wifi connection using wicked

    still broken

    the only error found in journalctl:

    Code:
    Jan 22 19:29:28 nux kernel: do_IRQ: 1.39 No irq handler for vector
    Reply With Quote Reply With Quote
  8. 22-Jan-2021, 12:53 #8
    deano_ferrari
    deano_ferrari is online now Global Moderator
    Join Date
    Jun 2008
    Location
    Auckland, NZ
    Posts
    22,594
    Blog Entries
    1

    Default Re: unstable wifi connection using wicked

    Quote Originally Posted by MakeTopSite View Post
    Thank you.

    Differences are:

    I use wicked.
    It does not happen every day.
    No info in dmesg, journalctl.
    No need to reboot Leap.
    The choice of network manager should make no difference here.
    openSUSE Leap 15.2; KDE Plasma 5
    Reply With Quote Reply With Quote
  9. 22-Jan-2021, 17:09 #9
    tsu2's Avatar
    tsu2
    tsu2 jest offline Flux Capacitor Penguin
    Join Date
    Jun 2008
    Location
    San Diego, Ca, USA
    Posts
    13,175
    Blog Entries
    2

    Default Re: unstable wifi connection using wicked

    These errors describe your problem
    Code:
    Download (curl) error for 'https://download.nvidia.com/opensuse/leap/15.2/repodata/repomd.xml':
Error code: Connection failed
Error message: Could not resolve host: download.nvidia.com

Abort, retry, ignore? [a/r/i/...? shows all options] (a):
    Code:
    No internet
Try:

Checking the network cables, modem, and router
Reconnecting to Wi-Fi
DNS_PROBE_FINISHED_NO_INTERNET
You have name resolution problems which means that although your basic networking is working, your system can't query a DNS server to resolve the name of your target connection to an IP address.
    You should diagnose and fix this using usual methods...
    view the contents of file /etc/resolv.conf to view configured DNS servers.
    Ping the configured DNS servers to verify you have a network path to those DNS servers
    Use a utility like nslookup or dig that allows you to query the DNS servers directly, and if your configured DNS servers don't work, try others.

    You can use your imagination why you can't execute a name resolution lookup, eg
    You can't connect to a working DNS server
    You can connect to a working DNS server but it's not responding
    You've been assigned intermittently (overloaded?) DNS servers which return results only sometimes.

    If you you have problems figuring out what to do, post again.

    TSU
    Beginner Wiki Quickstart - https://en.opensuse.org/User:Tsu2/Quickstart_Wiki
    Solved a problem recently? Create a wiki page for future personal reference!
    Learn something new?
    Attended a computing event?
    Post and Share!
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules