Results 1 to 2 of 2

Thread: Play Camcorder Digital Video(DV) Files On Suse - [SOLVED].

  1. #1

    Thumbs up Play Camcorder Digital Video(DV) Files On Suse - [SOLVED].

    Playing DV video files on Suse Leap 15.2 is a two step process.

    Copy the DV files from the camera to the PC.


    • Buy firewire card and install into the appropriate PCI slot in the PC.
      • If the camera has a mini DV port (2 pin) then the firewire card should also have a mini DV port. Do not use a firewire card with 4 pin firewire ports and a 2 pin to 4 pin firewire cable adapter. This may generate a camera not detected or camera not found message. All the advice on the net says check the firewire configuration on the PC when the problem is with the 2 pin to 4 pin cable and not the configuration.
      • Buy a firwire card with 2 pin port if the camera has a two pin mini DV port.

    • Connect the Camcorder to the firewire card via the firwire cable.
    • Install dvgrab if not installed by default.
    • Run the command "dvgrab --autosplit --timestamp --size 0 --rewind youFile-" in whatever directory you want to store the files.
      • dvgrab has a lot of options so check the man pages. The command as described above generates raw DV files on the PC.
      • If dvgrab says camera not detected then turn the camera on and off and check the cable. Its probably not a software problem.



    Play the DV files on the PC with VLC.

    There is a massive amount of information on the net about converting DV files from DV format to AVI, MP4 or some other format.

    However, if you just want to play the DV files use Videolan VLC. However, while VLC works out of the box on Windows, the version in the Suse Leap does not have the required CODECS files. I uninstalled the Suse version and installed the Videolan version using these instructions: https://www.videolan.org/vlc/download-suse.html.

    sudo zypper ar https://download.videolan.org/pub/vlc/SuSE/<SUSE version> VLC
    sudo zypper mr -r VLC
    sudo zypper in vlcIf you want to stick with the Suse version then try this: https://opensuse-guide.org/codecs.php

    SMPlayer works without modification.

    Convert to MP4


    I manged to convert some of the DV files to MP4 files using ffmpeg - https://ffmpeg.org/download.html

    Again, the default Suse package lacks all the codecs. I used the package "home:aevseev" listed here: https://software.opensuse.org/package/ffmpeg

    I got this command to work.

    ffmpeg -i YourFile.dv -deinterlace -vcodec libx264 -acodec aac OutputFile.mp4

    Conclusion.

    I got there eventually but there were roadblocks at every step. Needed to use the right cable and find the right packages.

  2. #2
    Join Date
    Jun 2008
    Location
    Netherlands
    Posts
    27,323

    Default Re: Play Camcorder Digital Video(DV) Files On Suse - [SOLVED].

    First, these are the openSUSE forums, not Suse.

    Then, did you read the sticky threads at the top of this Multimedia subforum?

    AFAIK, all is there. And in fact adding the libvdvcss repo, installing libdvdcss from thre (and disableing the repo afterwards, because you will not need it again) and adding the Packman repo and then switching to it (all described in the sticky threads, does it all for multimedia. Or do you still miss something.

    Only the description of how to connect the device, etc. looks an addition to me.
    Last edited by hcvv; 25-Oct-2020 at 04:32.
    Henk van Velden

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •