I have:
Code:
hwinfo --gfx
17: PCI 100.0: 0380 Display controller                           
  [Created at pci.386]
  Unique ID: VCu0.xOaEH+tOOxB
  Parent ID: mnDB.pKxIWxtK6N4
  SysFS ID: /devices/pci0000:00/0000:00:01.1/0000:01:00.0
  SysFS BusID: 0000:01:00.0
  Hardware Class: graphics card
  Model: "ATI Baffin [Radeon RX 460/560D / Pro 450/455/460/555/555X/560/560X]"
  Vendor: pci 0x1002 "ATI Technologies Inc"
  Device: pci 0x67ef "Baffin [Radeon RX 460/560D / Pro 450/455/460/555/555X/560/560X]"
  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
  SubDevice: pci 0x1eae  
  Revision: 0xe5
  Driver: "amdgpu"
  Driver Modules: "amdgpu"
  Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable)
  Memory Range: 0xf0000000-0xf01fffff (ro,non-prefetchable)
  I/O Ports: 0xf000-0xffff (rw)
  Memory Range: 0xfea00000-0xfea3ffff (rw,non-prefetchable)
  Memory Range: 0xfea40000-0xfea5ffff (ro,non-prefetchable,disabled)
  IRQ: 70 (115 events)
  Module Alias: "pci:v00001002d000067EFsv00001043sd00001EAEbc03sc80i00"
  Driver Info #0:
    Driver Status: amdgpu is active
    Driver Activation Cmd: "modprobe amdgpu"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #29 (PCI bridge)

30: PCI 500.0: 0300 VGA compatible controller (VGA)
  [Created at pci.386]
  Unique ID: Ddhb.VYM+XMk86m9
  Parent ID: JZZT.A_VqgZKlSp2
  SysFS ID: /devices/pci0000:00/0000:00:08.1/0000:05:00.0
  SysFS BusID: 0000:05:00.0
  Hardware Class: graphics card
  Model: "ATI Picasso"
  Vendor: pci 0x1002 "ATI Technologies Inc"
  Device: pci 0x15d8 "Picasso"
  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
  SubDevice: pci 0x1eae  
  Revision: 0xc2
  Driver: "amdgpu"
  Driver Modules: "amdgpu"
  Memory Range: 0xc0000000-0xcfffffff (ro,non-prefetchable)
  Memory Range: 0xd0000000-0xd01fffff (ro,non-prefetchable)
  I/O Ports: 0xb000-0xbfff (rw)
  Memory Range: 0xfe500000-0xfe57ffff (rw,non-prefetchable)
  IRQ: 24 (no events)
  Module Alias: "pci:v00001002d000015D8sv00001043sd00001EAEbc03sc00i00"
  Driver Info #0:
    Driver Status: amdgpu is active
    Driver Activation Cmd: "modprobe amdgpu"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #22 (PCI bridge)

Primary display adapter: #30
How can I switch between Vega and Radeon?
I have enabled desktop effects but effects are not working.
I guess, that I need better drivers. How to install drivers for VEGA 11 and Radeon RX560X?