Kernel module: rtl8723de unter Leap 15.2 nicht aktivierbar

**Linjudi** · 25-Jul-2020, 06:17

Ich habe auf einem HP Laptop Leap 15.2 installiert. Ethernet-Karte (Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)) funktioniert wunderbar. WLan läuft nicht. Ich habe das Sauerland -Repo aktiviert und das Paket (rtlwifi_new-extended-kmp-default - Realtek mac80211 Wireless LAN Drivers) runtergeladen.
Die Wlan-Karte wird aber weiterhin nicht bei den Netzwerkeinstellungen unter YAST aufgeführt.

Hier noch ein paar Info`s von meinem System:

Code:

localhost:/home/dittmar # hwinfo --netcard
13: PCI 200.0: 0280 Network controller                          
  [Created at pci.386]
  Unique ID: B35A.qRNrg88_gN6
  Parent ID: HnsE.vx7cjU_Osl2
  SysFS ID: /devices/pci0000:00/0000:00:1c.5/0000:02:00.0
  SysFS BusID: 0000:02:00.0
  Hardware Class: network
  Model: "Realtek RTL8723DE 802.11b/g/n PCIe Adapter"
  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
  Device: pci 0xd723 "RTL8723DE 802.11b/g/n PCIe Adapter"
  SubVendor: pci 0x103c "Hewlett-Packard Company"
  SubDevice: pci 0x8319 
  I/O Ports: 0x3000-0x3fff (rw)
  Memory Range: 0xb1100000-0xb110ffff (rw,non-prefetchable)
  IRQ: 255 (no events)
  Module Alias: "pci:v000010ECd0000D723sv0000103Csd00008319bc02sc80i00"
  Driver Info #0:
    Driver Status: rtl8723de is not active
    Driver Activation Cmd: "modprobe rtl8723de"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #15 (PCI bridge)

17: PCI 100.0: 0200 Ethernet controller
  [Created at pci.386]
  Unique ID: rBUF.2dblqbopyN5
  Parent ID: z8Q3.OXBsEwshKN2
  SysFS ID: /devices/pci0000:00/0000:00:1c.0/0000:01:00.0
  SysFS BusID: 0000:01:00.0
  Hardware Class: network
  Model: "Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller"
  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
  Device: pci 0x8168 "RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller"
  SubVendor: pci 0x103c "Hewlett-Packard Company"
  SubDevice: pci 0x84ca 
  Revision: 0x15
  Driver: "r8169"
  Driver Modules: "r8169"
  Device File: eth0
  I/O Ports: 0x4000-0x4fff (rw)
  Memory Range: 0xb1204000-0xb1204fff (rw,non-prefetchable)
  Memory Range: 0xb1200000-0xb1203fff (rw,non-prefetchable)
  IRQ: 19 (no events)
  HW Address: 00:68:eb:92:89:0c
  Permanent HW Address: 00:68:eb:92:89:0c
  Link detected: yes
  Module Alias: "pci:v000010ECd00008168sv0000103Csd000084CAbc02sc00i00"
  Driver Info #0:
    Driver Status: r8169 is active
    Driver Activation Cmd: "modprobe r8169"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #10 (PCI bridge)
  
  
localhost:/home/dittmar # modprobe rtl8723de
modprobe: ERROR: could not insert 'rtl8723de': Operation not permitted

Kann jemand helfen?

**Sauerland** · 25-Jul-2020, 06:29

Poste:

Code:

ls -al /lib/firmware/rtlwifi/ | grep -i rtl8723d

Code:

zypper se -si rtlwifi kernel

Ist secure boot im UEFI/Bios ausgeschaltet? Meine kmps sind nicht mit einem bekannten Schlüssel signiert.

**Linjudi** · 25-Jul-2020, 06:38

Hallo!

Code:

localhost:/home/dittmar # ls -al /lib/firmware/rtlwifi/ | grep -i rtl8723d
-rw-r--r-- 1 root root  27726 24. Nov 2019  rtl8723defw.bin
localhost:/home/dittmar # zypper se -si rtlwifi kernel
Repository-Daten werden geladen...
Installierte Pakete werden gelesen...

S  | Name                             | Typ   | Version                               | Arch   | Repository
---+----------------------------------+-------+---------------------------------------+--------+--------------------------------
i+ | kernel-default                   | Paket | 5.3.18-lp152.26.2                     | x86_64 | Hauptaktualisierungs-Repository
i  | kernel-firmware                  | Paket | 20200107-lp152.1.1                    | noarch | Haupt-Repository
i  | purge-kernels-service            | Paket | 0-lp152.4.1                           | noarch | Haupt-Repository
i+ | rtlwifi_new-extended-kmp-default | Paket | 20200502_k5.3.18_lp152.19-lp152.11.16 | x86_64 | realtek
i  | rtlwifi_new-firmware-license     | Paket | 0.7.git20180301-lp152.6.1             | noarch | realtek

**Linjudi** · 25-Jul-2020, 06:40

Sorry, aber wie stelle ich fest, ob secure boot im UEFI/Bios ausgeschaltet ist?

**Sauerland** · 25-Jul-2020, 07:04

Installiere mal das Paket aus dem Update Repo:
Als root:

Code:

zypper ar -f -p30 https://download.opensuse.org/repositories/home:/Sauerland:/hardware/openSUSE_Leap_15.2_Update/ Sauerland-Update

Code:

zypper in -f rtlwifi_new-extended-kmp-default

Sorry, aber wie stelle ich fest, ob secure boot im UEFI/Bios ausgeschaltet ist?

In dem du beim Booten die Taste/Tastenkombination drückst, um ins Bios zu wechseln......
Oftmals die Taste Entf

**Linjudi** · 25-Jul-2020, 09:08

Hi, habs durchgeführt, ändert aber nichts. Kein Wlan.

Code:

localhost:/home/dittmar # zypper in -f rtlwifi_new-extended-kmp-default
Metadaten von Repository 'Sauerland-Update' abrufen ..............................................................................................................................................[fertig]
Cache für Repository 'Sauerland-Update' erzeugen .................................................................................................................................................[fertig]
Repository-Daten werden geladen...
Installierte Pakete werden gelesen...
Installation von 'rtlwifi_new-extended-kmp-default-20200502_k5.3.18_lp152.26-lp152.11.5.x86_64' aus Repository 'Sauerland-Update' wird erzwungen.
Paketabhängigkeiten werden aufgelöst...

Das folgende NEUE Paket wird installiert:
  rtlwifi_new-extended-kmp-default-20200502_k5.3.18_lp152.26-lp152.11.5

1 neues Paket zu installieren.
Gesamtgröße des Downloads: 864,9 KiB. Bereits im Cache gespeichert: 0 B. Nach der Operation werden zusätzlich 6,7 MiB belegt.
Fortfahren? [j/n/v/...? zeigt alle Optionen] (j): j
Paket rtlwifi_new-extended-kmp-default-20200502_k5.3.18_lp152.26-lp152.11.5.x86_64 abrufen                                                                           (1/1), 864,9 KiB (  6,7 MiB entpackt)
Abrufen: rtlwifi_new-extended-kmp-default-20200502_k5.3.18_lp152.26-lp152.11.5.x86_64.rpm ..........................................................................................[fertig (512,2 KiB/s)]

Überprüfung auf Dateikonflikte läuft: ............................................................................................................................................................[fertig]
(1/1) Installieren: rtlwifi_new-extended-kmp-default-20200502_k5.3.18_lp152.26-lp152.11.5.x86_64 .................................................................................................[fertig]
%posttrans script 'rtlwifi_new-extended-kmp-default-20200502_k5.3.18_lp152.26-lp152.11.5.x86_64.rpm' wird ausgeführt ----------------------------------------------------------------------------------[\]
Output of rtlwifi_new-extended-kmp-default-20200502_k5.3.18_lp152.26-lp152.11.5.x86_64.rpm %posttrans script:
    Creating initrd: /boot/initrd-5.3.18-lp152.26-default                                                                                                                                                 
    dracut: Executing: /usr/bin/dracut --logfile /var/log/YaST2/mkinitrd.log --force /boot/initrd-5.3.18-lp152.26-default 5.3.18-lp152.26-default
    dracut: dracut module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
    dracut: *** Including module: bash ***
    dracut: *** Including module: systemd ***
    dracut: *** Including module: systemd-initrd ***
    dracut: *** Including module: i18n ***
    dracut: *** Including module: drm ***
    dracut: *** Including module: plymouth ***
    dracut: *** Including module: btrfs ***
    dracut: *** Including module: kernel-modules ***
    dracut: *** Including module: kernel-modules-extra ***
    dracut: *** Including module: resume ***
    dracut: *** Including module: rootfs-block ***
    dracut: *** Including module: suse-btrfs ***
    dracut: *** Including module: suse-xfs ***
    dracut: *** Including module: terminfo ***
    dracut: *** Including module: udev-rules ***
    dracut: Skipping udev rule: 40-redhat.rules
    dracut: Skipping udev rule: 50-firmware.rules
    dracut: Skipping udev rule: 50-udev.rules
    dracut: Skipping udev rule: 91-permissions.rules
    dracut: Skipping udev rule: 80-drivers-modprobe.rules
    dracut: *** Including module: dracut-systemd ***
    dracut: *** Including module: haveged ***
    dracut: *** Including module: ostree ***
    dracut: *** Including module: usrmount ***
    dracut: *** Including module: base ***
    dracut: *** Including module: fs-lib ***
    dracut: *** Including module: shutdown ***
    dracut: *** Including module: suse ***
    dracut: *** Including module: suse-initrd ***
    dracut: *** Including modules done ***
    dracut: *** Installing kernel module dependencies ***
    dracut: *** Installing kernel module dependencies done ***
    dracut: *** Resolving executable dependencies ***
    dracut: *** Resolving executable dependencies done ***
    dracut: *** Hardlinking files ***
    dracut: *** Hardlinking files done ***
    dracut: *** Stripping files ***
    dracut: *** Stripping files done ***
    dracut: *** Generating early-microcode cpio image ***
    dracut: *** Constructing GenuineIntel.bin ***
    dracut: *** Store current command line parameters ***
    dracut: Stored kernel commandline:
    dracut:  resume=UUID=62b9e456-fa57-47a4-b8c7-3ede9a39bf98
    dracut:  root=UUID=dcdcb552-71fe-41aa-b283-62fe42adb279 rootfstype=btrfs rootflags=rw,relatime,ssd,space_cache,subvolid=266,subvol=/@/.snapshots/1/snapshot,subvol=@/.snapshots/1/snapshot
    dracut: *** Creating image file '/boot/initrd-5.3.18-lp152.26-default' ***
    dracut: *** Creating initramfs image file '/boot/initrd-5.3.18-lp152.26-default' done ***

%posttrans scripts werden ausgeführt .............................................................................................................................................................[fertig]

Habe auch ohne secure boot gestartet. Nichts.

Code:

ocalhost:/home/dittmar # hwinfo --netcard
13: PCI 200.0: 0280 Network controller                          
  [Created at pci.386]
  Unique ID: B35A.qRNrg88_gN6
  Parent ID: HnsE.vx7cjU_Osl2
  SysFS ID: /devices/pci0000:00/0000:00:1c.5/0000:02:00.0
  SysFS BusID: 0000:02:00.0
  Hardware Class: network
  Model: "Realtek RTL8723DE 802.11b/g/n PCIe Adapter"
  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
  Device: pci 0xd723 "RTL8723DE 802.11b/g/n PCIe Adapter"
  SubVendor: pci 0x103c "Hewlett-Packard Company"
  SubDevice: pci 0x8319 
  I/O Ports: 0x3000-0x3fff (rw)
  Memory Range: 0xb1100000-0xb110ffff (rw,non-prefetchable)
  IRQ: 255 (no events)
  Module Alias: "pci:v000010ECd0000D723sv0000103Csd00008319bc02sc80i00"
  Driver Info #0:
    Driver Status: rtl8723de is not active
    Driver Activation Cmd: "modprobe rtl8723de"
  Driver Info #1:
    Driver Status: wl is not active
    Driver Activation Cmd: "modprobe wl"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #15 (PCI bridge)

17: PCI 100.0: 0200 Ethernet controller
  [Created at pci.386]
  Unique ID: rBUF.2dblqbopyN5
  Parent ID: z8Q3.OXBsEwshKN2
  SysFS ID: /devices/pci0000:00/0000:00:1c.0/0000:01:00.0
  SysFS BusID: 0000:01:00.0
  Hardware Class: network
  Model: "Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller"
  Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
  Device: pci 0x8168 "RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller"
  SubVendor: pci 0x103c "Hewlett-Packard Company"
  SubDevice: pci 0x84ca 
  Revision: 0x15
  Driver: "r8169"
  Driver Modules: "r8169"
  Device File: eth0
  I/O Ports: 0x4000-0x4fff (rw)
  Memory Range: 0xb1204000-0xb1204fff (rw,non-prefetchable)
  Memory Range: 0xb1200000-0xb1203fff (rw,non-prefetchable)
  IRQ: 19 (no events)
  HW Address: 00:68:eb:92:89:0c
  Permanent HW Address: 00:68:eb:92:89:0c
  Link detected: yes
  Module Alias: "pci:v000010ECd00008168sv0000103Csd000084CAbc02sc00i00"
  Driver Info #0:
    Driver Status: r8169 is active
    Driver Activation Cmd: "modprobe r8169"
  Driver Info #1:
    Driver Status: r8168 is not active
    Driver Activation Cmd: "modprobe r8168"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #10 (PCI bridge)

**Linjudi** · 25-Jul-2020, 09:09

Kann es mit dem Network-Manager zusammenhängen?

**Sauerland** · 25-Jul-2020, 09:30

Poste mal als root ausgeführt:

Code:

journalctl -b | grep -Ei 'firm|rtl|wlan|error'

**Linjudi** · 25-Jul-2020, 10:28

Das is jetzt aber echt viel!

Code:

  localhost:/home/dittmar # journalctl -b | grep -Ei 'firm|rtl|wlan|error'
Jul 25 19:26:20 localhost kernel: Spectre V2 : Enabling Restricted Speculation for firmware calls
Jul 25 19:26:20 localhost kernel: ACPI BIOS Error (bug): Failure creating named object [\_GPE._L72], AE_ALREADY_EXISTS (20190703/dswload2-327)
Jul 25 19:26:20 localhost kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190703/psobject-221)
Jul 25 19:26:20 localhost kernel: ACPI BIOS Error (bug): Failure creating named object [\_SB.AWAC], AE_ALREADY_EXISTS (20190703/dswload2-327)
Jul 25 19:26:20 localhost kernel: ACPI Error: AE_ALREADY_EXISTS, During name lookup/catalog (20190703/psobject-221)
Jul 25 19:26:20 localhost kernel: ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
Jul 25 19:26:20 localhost kernel: RAS: Correctable Errors collector initialized.
Jul 25 19:26:20 localhost kernel: psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x5d4f01)
Jul 25 19:26:20 localhost kernel: psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x5d4f01)
Jul 25 19:26:20 localhost kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
Jul 25 19:26:20 localhost kernel: [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
Jul 25 19:26:21 localhost kernel: usb 1-8: Product: 802.11n WLAN Adapter
Jul 25 17:26:22 localhost kernel: r8169 0000:01:00.0 eth0: RTL8168h/8111h, 00:68:eb:92:89:0c, XID 541, IRQ 134
Jul 25 17:26:23 localhost kernel: Bluetooth: hci0: RTL: rtl: examining hci_ver=08 hci_rev=000d lmp_ver=08 lmp_subver=8723
Jul 25 17:26:23 localhost kernel: Bluetooth: hci0: RTL: rom_version status=0 version=2
Jul 25 17:26:23 localhost kernel: Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723d_fw.bin
Jul 25 17:26:23 localhost kernel: Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723d_config.bin
Jul 25 17:26:23 localhost kernel: Bluetooth: hci0: RTL: cfg_sz 10, total sz 33266
Jul 25 17:26:30 localhost ksmserver[1845]: Qt: Session management error: networkIdsList argument is NULL
Jul 25 17:26:31 localhost kscreen_backend_launcher[1969]: kscreen.xcb.helper: Event Error:  147
Jul 25 17:26:32 localhost kwin_x11[1864]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 1439, resource id: 16777221, major code: 18 (ChangeProperty), minor code: 0
Jul 25 17:26:32 localhost kwin_x11[1864]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 1490, resource id: 69206021, major code: 18 (ChangeProperty), minor code: 0
Jul 25 17:26:33 localhost dbus-daemon[1173]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.30" (uid=1000 pid=2114 comm="/usr/lib64/libexec/org_kde_powerdevil ") interface="org.freedesktop.login1.Manager" member="CanSuspendThenHibernate" error name="(unset)" requested_reply="0" destination="org.freedesktop.login1" (uid=0 pid=1292 comm="/usr/lib/systemd/systemd-logind ")
Jul 25 17:26:34 localhost kernel: Bluetooth: hci0: RTL: download fw command failed (-110)
Jul 25 17:26:35 localhost kwin_x11[1864]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 2874, resource id: 33554655, major code: 3 (GetWindowAttributes), minor code: 0
Jul 25 17:26:35 localhost kwin_x11[1864]: qt.qpa.xcb: QXcbConnection: XCB error: 9 (BadDrawable), sequence: 2875, resource id: 33554655, major code: 14 (GetGeometry), minor code: 0
Jul 25 17:26:35 localhost kwin_x11[1864]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 3127, resource id: 33554668, major code: 3 (GetWindowAttributes), minor code: 0
Jul 25 17:26:35 localhost kwin_x11[1864]: qt.qpa.xcb: QXcbConnection: XCB error: 9 (BadDrawable), sequence: 3128, resource id: 33554668, major code: 14 (GetGeometry), minor code: 0
Jul 25 17:26:36 localhost kdeinit5[2378]: Qt: Session management error: networkIdsList argument is NULL
Jul 25 17:26:37 localhost plasmashell[1870]: libkcups: CUPS-Get-Printers last error: 1030 Keine Druckziele hinzugefügt.
Jul 25 17:26:37 localhost plasmashell[1870]: libkcups: Get-Jobs last error: 0 successful-ok
Jul 25 17:26:37 localhost plasmashell[1870]: libkcups: Get-Jobs last error: 0 successful-ok
Jul 25 17:26:37 localhost plasmashell[1870]: libkcups: Create-Printer-Subscriptions last error: 0 successful-ok
Jul 25 17:26:37 localhost kwin_x11[1864]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 4106, resource id: 8388640, major code: 18 (ChangeProperty), minor code: 0
Jul 25 17:28:10 localhost kwin_x11[1864]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 12272, resource id: 62914563, major code: 15 (QueryTree), minor code: 0
Jul 25 17:28:10 localhost kwin_x11[1864]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 12277, resource id: 62914563, major code: 18 (ChangeProperty), minor code: 0
Jul 25 17:28:11 localhost kwin_x11[1864]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 12441, resource id: 115343365, major code: 18 (ChangeProperty), minor code: 0
Jul 25 17:28:31 localhost kwin_x11[1864]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 14468, resource id: 37749059, major code: 18 (ChangeProperty), minor code: 0
Jul 25 17:28:32 localhost kwin_x11[1864]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 14820, resource id: 8388613, major code: 18 (ChangeProperty), minor code: 0
Jul 25 17:28:36 localhost kwin_x11[1864]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 16048, resource id: 8388628, major code: 18 (ChangeProperty), minor code: 0
Jul 25 17:28:37 localhost kwin_x11[1864]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 16329, resource id: 33555842, major code: 3 (GetWindowAttributes), minor code: 0
Jul 25 17:28:37 localhost kwin_x11[1864]: qt.qpa.xcb: QXcbConnection: XCB error: 9 (BadDrawable), sequence: 16330, resource id: 33555842, major code: 14 (GetGeometry), minor code: 0
Jul 25 17:29:25 localhost NetworkManager[4193]: <info>  [1595690965.2016] manager[0x55d9626320e0]: monitoring kernel firmware directory '/lib/firmware'.
Jul 25 17:29:29 localhost.localdomain kwin_x11[1864]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 21330, resource id: 104857730, major code: 18 (ChangeProperty), minor code: 0
Jul 25 17:29:37 localhost.localdomain kwin_x11[1864]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 25062, resource id: 106954763, major code: 18 (ChangeProperty), minor code: 0
Jul 25 17:29:41 localhost.localdomain plasmashell[1870]: file:///usr/share/plasma/plasmoids/org.kde.plasma.taskmanager/contents/ui/main.qml:455: TypeError: Type error
Jul 25 17:29:41 localhost.localdomain kwin_x11[1864]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 26099, resource id: 37749327, major code: 18 (ChangeProperty), minor code: 0
Jul 25 17:29:41 localhost.localdomain kwin_x11[1864]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 26783, resource id: 33556812, major code: 3 (GetWindowAttributes), minor code: 0
Jul 25 17:29:41 localhost.localdomain kwin_x11[1864]: qt.qpa.xcb: QXcbConnection: XCB error: 9 (BadDrawable), sequence: 26784, resource id: 33556812, major code: 14 (GetGeometry), minor code: 0
Jul 25 17:29:42 localhost.localdomain plasmashell[1870]: qt.qpa.xcb: QXcbConnection: XCB error: 8 (BadMatch), sequence: 7958, resource id: 37748770, major code: 152 (Unknown), minor code: 11
Jul 25 17:31:33 localhost.localdomain akonadi_imap_resource[2145]: org.kde.pim.imapresource: Get metadata failed:  "GetMetaData fehlgeschlagen, die Serverantwort lautet: A000008 BAD Error in IMAP command GETMETADATA: Value 1/1 of DEPTH is not numeric and positive or infinity . ( RFC 5464 Section 4.2.2 ) ( 0.000 + 0.000 secs ) . "
Jul 25 17:31:33 localhost.localdomain akonadi_imap_resource[2145]: org.kde.pim.imapresource: Get metadata failed:  "GetMetaData fehlgeschlagen, die Serverantwort lautet: A000013 BAD Error in IMAP command GETMETADATA: Value 1/1 of DEPTH is not numeric and positive or infinity . ( RFC 5464 Section 4.2.2 ) ( 0.000 + 0.000 secs ) . "
Jul 25 17:31:34 localhost.localdomain akonadi_imap_resource[2145]: org.kde.pim.imapresource: Get metadata failed:  "GetMetaData fehlgeschlagen, die Serverantwort lautet: A000018 BAD Error in IMAP command GETMETADATA: Value 1/1 of DEPTH is not numeric and positive or infinity . ( RFC 5464 Section 4.2.2 ) ( 0.000 + 0.000 secs ) . "
Jul 25 17:31:34 localhost.localdomain akonadi_imap_resource[2145]: org.kde.pim.imapresource: Get metadata failed:  "GetMetaData fehlgeschlagen, die Serverantwort lautet: A000023 BAD Error in IMAP command GETMETADATA: Value 1/1 of DEPTH is not numeric and positive or infinity . ( RFC 5464 Section 4.2.2 ) ( 0.000 + 0.000 secs ) . "
Jul 25 17:31:34 localhost.localdomain akonadi_imap_resource[2145]: org.kde.pim.imapresource: Get metadata failed:  "GetMetaData fehlgeschlagen, die Serverantwort lautet: A000028 BAD Error in IMAP command GETMETADATA: Value 1/1 of DEPTH is not numeric and positive or infinity . ( RFC 5464 Section 4.2.2 ) ( 0.000 + 0.000 secs ) . "
Jul 25 17:31:34 localhost.localdomain akonadi_imap_resource[2145]: org.kde.pim.imapresource: Get metadata failed:  "GetMetaData fehlgeschlagen, die Serverantwort lautet: A000033 BAD Error in IMAP command GETMETADATA: Value 1/1 of DEPTH is not numeric and positive or infinity . ( RFC 5464 Section 4.2.2 ) ( 0.000 + 0.000 secs ) . "
Jul 25 17:31:34 localhost.localdomain akonadi_imap_resource[2145]: org.kde.pim.imapresource: Get metadata failed:  "GetMetaData fehlgeschlagen, die Serverantwort lautet: A000038 BAD Error in IMAP command GETMETADATA: Value 1/1 of DEPTH is not numeric and positive or infinity . ( RFC 5464 Section 4.2.2 ) ( 0.000 + 0.000 secs ) . "
Jul 25 17:31:35 localhost.localdomain akonadi_imap_resource[2145]: org.kde.pim.imapresource: Get metadata failed:  "GetMetaData fehlgeschlagen, die Serverantwort lautet: A000043 BAD Error in IMAP command GETMETADATA: Value 1/1 of DEPTH is not numeric and positive or infinity . ( RFC 5464 Section 4.2.2 ) ( 0.000 + 0.000 secs ) . "
Jul 25 17:31:48 localhost.localdomain kwin_x11[1864]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 43390, resource id: 130023566, major code: 2 (ChangeWindowAttributes), minor code: 0
Jul 25 17:32:17 localhost.localdomain kwin_x11[1864]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 45263, resource id: 130023577, major code: 18 (ChangeProperty), minor code: 0
Jul 25 17:36:33 localhost.localdomain akonadi_imap_resource[2145]: org.kde.pim.imapresource: Get metadata failed:  "GetMetaData fehlgeschlagen, die Serverantwort lautet: A000049 BAD Error in IMAP command GETMETADATA: Value 1/1 of DEPTH is not numeric and positive or infinity . ( RFC 5464 Section 4.2.2 ) ( 0.000 + 0.000 secs ) . "
Jul 25 17:36:33 localhost.localdomain akonadi_imap_resource[2145]: org.kde.pim.imapresource: Get metadata failed:  "GetMetaData fehlgeschlagen, die Serverantwort lautet: A000054 BAD Error in IMAP command

Der Gesamte - Output sind über 73.000 Zeichen. Das erlaubt das System wohl nicht. Ichs auf die letzten 1,5 Std gekürzt- Reicht das?