Results 1 to 3 of 3

Thread: cpupower not working with 15.2 on my laptop

Hybrid View

  1. #1

    Default cpupower not working with 15.2 on my laptop

    cpupower used to work under leap 15.1 and now it doesn't.

    I did not upgrade from 15.1 to 15.2, I backed up my data and wiped the disk to install 15.2 as a fresh install. The cpu is an old AMD-A10

    Now I get:

    Code:
    $ cpupower frequency-info
    analyzing CPU 0:
      no or unknown cpufreq driver is active on this CPU
      CPUs which run at the same hardware frequency: Not Available
      CPUs which need to have their frequency coordinated by software: Not Available
      maximum transition latency:  Cannot determine or is not supported.
    Not Available
      available cpufreq governors: Not Available
      Unable to determine current policy
      current CPU frequency: Unable to call hardware
      current CPU frequency:  Unable to call to kernel
      boost state support:
        Supported: yes
        Active: yes
    here's my inxi

    Code:
    $ inxi -Fxxxz
    System:    Kernel: 5.3.18-lp152.20.7-default x86_64 bits: 64 compiler: gcc v: 7.5.0 
               Desktop: KDE Plasma 5.18.5 tk: Qt 5.12.7 wm: kwin_x11 dm: SDDM 
               Distro: openSUSE Leap 15.2 
    Machine:   Type: Portable System: Dell product: Inspiron 5555 v: A12 serial: <filter> 
               Chassis: type: 8 v: A12 serial: <filter> 
               Mobo: Dell model: 0CHHXW v: A00 serial: <filter> UEFI [Legacy]: Dell v: A12 
               date: 08/30/2016 
    CPU:       Topology: Quad Core model: AMD A10-8700P Radeon R6 10 Compute Cores 4C+6G 
               bits: 64 type: MCP arch: Excavator rev: 1 L2 cache: 1024 KiB 
               flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm 
               bogomips: 14372 
               Speed: 2526 MHz min/max: N/A Core speeds (MHz): 1: 2526 2: 2440 3: 2879 4: 2701 
    Graphics:  Device-1: AMD Wani [Radeon R5/R6/R7 Graphics] vendor: Dell driver: amdgpu 
               v: kernel bus ID: 00:01.0 chip ID: 1002:9874 
               Device-2: Sunplus Innovation type: USB driver: uvcvideo bus ID: 2-4:3 
               chip ID: 1bcf:2b90 
               Display: x11 server: X.Org 1.20.3 compositor: kwin_x11 driver: amdgpu,ati 
               unloaded: fbdev,modesetting,vesa resolution: 1366x768~60Hz s-dpi: 96 
               OpenGL: renderer: AMD Radeon R6 Graphics (CARRIZO DRM 3.33.0 
               5.3.18-lp152.20.7-default LLVM 9.0.1) 
               v: 4.5 Mesa 19.3.4 direct render: Yes 
    Audio:     Device-1: AMD Kabini HDMI/DP Audio vendor: Dell driver: snd_hda_intel v: kernel 
               bus ID: 00:01.1 chip ID: 1002:9840 
               Device-2: AMD Family 15h Audio vendor: Dell driver: snd_hda_intel v: kernel 
               bus ID: 00:09.2 chip ID: 1022:157a 
               Sound Server: ALSA v: k5.3.18-lp152.20.7-default 
    Network:   Device-1: Realtek RTL810xE PCI Express Fast Ethernet vendor: Dell driver: r8169 
               v: kernel port: e000 bus ID: 01:00.0 chip ID: 10ec:8136 
               IF: eth0 state: down mac: <filter> 
               Device-2: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter vendor: Dell 
               driver: ath9k v: kernel port: e000 bus ID: 02:00.0 chip ID: 168c:0036 
               IF: wlan0 state: up mac: <filter> 
               Device-3: Qualcomm Atheros type: USB driver: btusb bus ID: 2-1:4 
               chip ID: 0cf3:e005 
    Drives:    Local Storage: total: 931.51 GiB used: 51.30 GiB (5.5%) 
               ID-1: /dev/sda vendor: Toshiba model: MQ01ABD100 size: 931.51 GiB speed: 6.0 Gb/s 
               rotation: 5400 rpm serial: <filter> rev: 3D scheme: MBR 
    Partition: ID-1: / size: 919.17 GiB used: 51.30 GiB (5.6%) fs: btrfs dev: /dev/sda1 
               ID-2: /home size: 919.17 GiB used: 51.30 GiB (5.6%) fs: btrfs dev: /dev/sda1 
               ID-3: /opt size: 919.17 GiB used: 51.30 GiB (5.6%) fs: btrfs dev: /dev/sda1 
               ID-4: /tmp size: 919.17 GiB used: 51.30 GiB (5.6%) fs: btrfs dev: /dev/sda1 
               ID-5: /var size: 919.17 GiB used: 51.30 GiB (5.6%) fs: btrfs dev: /dev/sda1 
    Swap:      ID-1: swap-1 type: partition size: 12.34 GiB used: 0 KiB (0.0%) priority: -2 
               dev: /dev/sda2 
    Sensors:   System Temperatures: cpu: 46.0 C mobo: 36.0 C sodimm: 29.0 C gpu: amdgpu 
               temp: 46 C 
               Fan Speeds (RPM): N/A 
    Info:      Processes: 208 Uptime: N/A Memory: 11.15 GiB used: 928.4 MiB (8.1%) Init: systemd 
               v: 234 runlevel: 5 target: graphical.target Compilers: gcc: N/A Shell: bash 
               v: 4.4.23 running in: konsole inxi: 3.1.00
    To me it looks like it's missing some driver, but I don't know what.

    I'd like to enable the performance governor

    Thanks

  2. #2
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    29,861
    Blog Entries
    15

    Default Re: cpupower not working with 15.2 on my laptop

    Hi
    I use to have one of those Dells, do you see acpi errors (or something in the grub command line options) as acpi-cpufreq module should be loaded?

    If no acpi options, try adding the following to kernel command line options via YaST bootloader;

    Code:
    acpi_enforce_resources=lax
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    SUSE SLE, openSUSE Leap/Tumbleweed (x86_64) | GNOME DE
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!

  3. #3

    Default Re: cpupower not working with 15.2 on my laptop

    Quote Originally Posted by malcolmlewis View Post
    Hi
    I use to have one of those Dells, do you see acpi errors (or something in the grub command line options) as acpi-cpufreq module should be loaded?

    If no acpi options, try adding the following to kernel command line options via YaST bootloader;

    Code:
    acpi_enforce_resources=lax
    It doesn't look like there's any error:

    Code:
    Jul 08 18:13:15 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    Jul 08 18:13:15 localhost kernel: IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
    Jul 08 18:13:15 localhost kernel: IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
    Jul 08 18:13:15 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Jul 08 18:13:15 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    Jul 08 18:13:15 localhost kernel: ACPI: IRQ0 used by override.
    Jul 08 18:13:15 localhost kernel: ACPI: IRQ9 used by override.
    Jul 08 18:13:15 localhost kernel: Using ACPI (MADT) for SMP configuration information
    Jul 08 18:13:15 localhost kernel: ACPI: HPET id: 0x10228201 base: 0xfed00000
    Jul 08 18:13:15 localhost kernel: smpboot: Allowing 4 CPUs, 0 hotplug CPUs
    Does this mean that it's already at "full speed"?

    Code:
    $ inxi -Cxxx
    CPU:       Topology: Quad Core model: AMD A10-8700P Radeon R6 10 Compute Cores 4C+6G bits: 64 type: MCP arch: Excavator rev: 1 
               L2 cache: 1024 KiB 
               flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 14374 
               Speed: 2562 MHz min/max: N/A Core speeds (MHz): 1: 2562 2: 3045 3: 2752 4: 2488
    I'm just starting a zoom meeting. I'll try the grub parameter tomorrow

    Thanks for the insight

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •