Page 7 of 8 FirstFirst ... 5678 LastLast
Results 61 to 70 of 74

Thread: new pepwave router, no internet

  1. #61

    Default Re: new pepwave router, no internet

    Quote Originally Posted by crmrhm View Post
    A couple of last gasp efforts: is the Firmware updated to the latest version 8.0.2?

    Also, your screen shot shows two DNS servers for cellular WAN, 68.28.31.30 and 68.28.31.31. Try putting those in the NetworkManager settings and see what happens.

    If still no success, a different router/modem sounds like the right move. I have no knowledge to offer on that hardware.
    Great idea. It still won't pull the pages (DNS?). You can see it hits the site, it shows in text address at the bottom left of the browser window, but then it hangs at the empty window as it keeps trying, spinning and eventually times out.


    At this point finding another router/LTE modem looks like the best answer. Hopefully someone can make a hardware recommendation.
    openSUSE Tumbleweed 64-bit / Cinnamon

  2. #62
    Join Date
    Jan 2014
    Location
    Erlangen
    Posts
    1,616

    Default Re: new pepwave router, no internet

    Quote Originally Posted by idee View Post
    Great idea. It still won't pull the pages (DNS?). You can see it hits the site, it shows in text address at the bottom left of the browser window, but then it hangs at the empty window as it keeps trying, spinning and eventually times out.


    At this point finding another router/LTE modem looks like the best answer. Hopefully someone can make a hardware recommendation.
    Award-winning simplicity

    Honored by specialist publications and praised by users, the FRITZ!Box operating concept has just one goal: to keep everything as simple as possible. A clear user interface and step-by-step wizards help make this happen.

    https://en.avm.de/products/fritzbox/fritzbox-6820-lte/
    AMD Athlon 4850e (2009), openSUSE 13.1, KDE 4, Intel i3-4130 (2014), i7-6700K (2016), i5-8250U (2018), openSUSE Tumbleweed, KDE Plasma 5

  3. #63

    Default Re: new pepwave router, no internet

    Thank you, looking into that now. And thank you for the help over the past week.
    openSUSE Tumbleweed 64-bit / Cinnamon

  4. #64

    Default Re: new pepwave router, no internet

    I have a completely new LTE router. I was not able to buy a Fritz here, but did find a MoFi4500. It has exactly the same problem. The wifi works, but it will not connect to openSuse. The computer talks to the router, connects to the admin app, pings out, but no internet connection. See below. DNS or something, but it is still not allowing the internet through the browser. It must be something in the installation.

    Tomorrow I am going to first uninstall NetworkManager. The strange thing is that is also forces the deinstallation of the Cinnamon desktop manager. I will then reinstall NM. If that doesn't fix it, I will go through the painful step of a new install. The root directory will be formatted. I do not want to trash my home directory as there is history and settings there. Are there any files in the home directory that should be deleted?

    thanks for the help,

    Code:
    nmcli
    ens2: connected to Wired connection 2
            "Realtek RTL-8100/8101L/8139"
            ethernet (8139too), 00:02:2A:D6:33:10, hw, mtu 1500
            ip4 default
            inet4 192.168.10.103/24
            route4 0.0.0.0/0
            route4 192.168.10.0/24
            inet6 fe80::3145:14cc:b664:3f1a/64
            route6 fe80::/64
            route6 ff00::/8
    
    enp0s25: disconnected
            "Intel 82567LM-3"
            1 connection available
            ethernet (e1000e), 18:A9:05:F2:B8:F9, autoconnect, hw, mtu 1500
    
    lo: unmanaged
            "lo"
            loopback (unknown), 00:00:00:00:00:00, sw, mtu 65536
    
    DNS configuration:
            servers: 192.168.10.1 68.28.31.30 68.28.31.31
            domains: lan
            interface: ens2
    
    dad@dad-Cinnamon:~> ip route
    default via 192.168.10.1 dev ens2 proto dhcp metric 20100 
    192.168.10.0/24 dev ens2 proto kernel scope link src 192.168.10.103 metric 100 
    dad@dad-Cinnamon:~> ping 195.135.221.140
    PING 195.135.221.140 (195.135.221.140) 56(84) bytes of data.
    64 bytes from 195.135.221.140: icmp_seq=1 ttl=65 time=224 ms
    64 bytes from 195.135.221.140: icmp_seq=2 ttl=65 time=187 ms
    64 bytes from 195.135.221.140: icmp_seq=3 ttl=65 time=186 ms
    64 bytes from 195.135.221.140: icmp_seq=4 ttl=65 time=185 ms
    64 bytes from 195.135.221.140: icmp_seq=5 ttl=65 time=163 ms
    
    host 192.168.10.1
    ;; connection timed out; no servers could be reached
    
    ip address show ens2
    3: ens2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
        link/ether 00:02:2a:d6:33:10 brd ff:ff:ff:ff:ff:ff
        altname enp7s9
        inet 192.168.10.103/24 brd 192.168.10.255 scope global dynamic noprefixroute ens2
           valid_lft 42775sec preferred_lft 42775sec
        inet6 fe80::3145:14cc:b664:3f1a/64 scope link noprefixroute 
           valid_lft forever preferred_lft forever
           
     ip link show
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    2: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
        link/ether 18:a9:05:f2:b8:f9 brd ff:ff:ff:ff:ff:ff
    3: ens2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
        link/ether 00:02:2a:d6:33:10 brd ff:ff:ff:ff:ff:ff
        altname enp7s9
          
    ip address
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
        inet 127.0.0.1/8 scope host lo
           valid_lft forever preferred_lft forever
        inet6 ::1/128 scope host 
           valid_lft forever preferred_lft forever
    2: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
        link/ether 18:a9:05:f2:b8:f9 brd ff:ff:ff:ff:ff:ff
    3: ens2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
        link/ether 00:02:2a:d6:33:10 brd ff:ff:ff:ff:ff:ff
        altname enp7s9
        inet 192.168.10.103/24 brd 192.168.10.255 scope global dynamic noprefixroute ens2
           valid_lft 42692sec preferred_lft 42692sec
        inet6 fe80::3145:14cc:b664:3f1a/64 scope link noprefixroute 
           valid_lft forever preferred_lft forever
    openSUSE Tumbleweed 64-bit / Cinnamon

  5. #65
    Join Date
    Jun 2008
    Location
    Auckland, NZ
    Posts
    21,541
    Blog Entries
    1

    Default Re: new pepwave router, no internet

    Quote Originally Posted by idee View Post
    I have a completely new LTE router. I was not able to buy a Fritz here, but did find a MoFi4500. It has exactly the same problem. The wifi works, but it will not connect to openSuse. The computer talks to the router, connects to the admin app, pings out, but no internet connection. See below. DNS or something, but it is still not allowing the internet through the browser. It must be something in the installation.
    The output you shared shows internet connectivity is working. You can successfully ping 195.135.221.140, but no domain name resolution. You should try testing an explicitly defined name server on the fly with with
    Code:
    echo "nameserver 8.8.8.8" |sudo tee /etc/resolv.conf
    If you can then reach websites by name with a browser that can be made permanent.

    Tomorrow I am going to first uninstall NetworkManager.
    I wouldn't do that. It's not a NetworkManager problem anyway.
    openSUSE Leap 15.2; KDE Plasma 5

  6. #66

    Default Re: new pepwave router, no internet

    thanks.

    Code:
    echo "nameserver 8.8.8.8" |sudo tee /etc/resolv.conf
    [sudo] password for root: 
    nameserver 8.8.8.8
    THAT WAS IT!

    What do we do to make it permanent? Or is it now?
    openSUSE Tumbleweed 64-bit / Cinnamon

  7. #67
    Join Date
    Jun 2008
    Location
    Auckland, NZ
    Posts
    21,541
    Blog Entries
    1

    Default Re: new pepwave router, no internet

    Quote Originally Posted by idee View Post
    thanks.

    Code:
    echo "nameserver 8.8.8.8" |sudo tee /etc/resolv.conf
    [sudo] password for root: 
    nameserver 8.8.8.8
    THAT WAS IT!

    What do we do to make it permanent? Or is it now?
    Edit the network connection. I mentioned how to configure DNS manually this waaayyyy back in post #8 and post #9.

    OpenDNS servers are a good choice. The IP addresses are
    208.67. 222.222
    208.67.220.220
    Last edited by deano_ferrari; 29-May-2020 at 21:56.
    openSUSE Leap 15.2; KDE Plasma 5

  8. #68
    Join Date
    Jan 2014
    Location
    Erlangen
    Posts
    1,616

    Default Re: new pepwave router, no internet

    Quote Originally Posted by idee View Post
    thanks.

    Code:
    echo "nameserver 8.8.8.8" |sudo tee /etc/resolv.conf
    [sudo] password for root: 
    nameserver 8.8.8.8
    THAT WAS IT!

    What do we do to make it permanent? Or is it now?
    I told you so in posts #23 and #26. /etc/resolv.conf is managed, be it by NetworkManager or wicked. Both of them manipulate it through netconfig. Making it REALLY permanent is straight forward: https://www.ctrl.blog/entry/resolvconf-tutorial.html
    AMD Athlon 4850e (2009), openSUSE 13.1, KDE 4, Intel i3-4130 (2014), i7-6700K (2016), i5-8250U (2018), openSUSE Tumbleweed, KDE Plasma 5

  9. #69

    Default Re: new pepwave router, no internet

    Thank you both. The thing is I don't understand much about networking. I tried to repeat the steps you both were asking and post the results. Sorry that I missed where you were both leading. I remember the 8.8.8.8 and 8.8.4.4 steps and added them to the NM settings and also those from https://en.opensuse.org/SDB:Configure_DNS , but they didn't do the trick before.

    Can you explain what this command did?

    echo "nameserver 8.8.8.8" |sudo tee /etc/resolv.conf
    openSUSE Tumbleweed 64-bit / Cinnamon

  10. #70
    Join Date
    Jun 2008
    Location
    Auckland, NZ
    Posts
    21,541
    Blog Entries
    1

    Default Re: new pepwave router, no internet

    Quote Originally Posted by idee View Post
    Thank you both. The thing is I don't understand much about networking. I tried to repeat the steps you both were asking and post the results. Sorry that I missed where you were both leading. I remember the 8.8.8.8 and 8.8.4.4 steps and added them to the NM settings and also those from https://en.opensuse.org/SDB:Configure_DNS , but they didn't do the trick before.

    Can you explain what this command did?

    echo "nameserver 8.8.8.8" |sudo tee /etc/resolv.conf
    Yes, it just rewrote /etc/resolv.conf with a working nameserver (in the test case Google's name server at 8.8.8.8). However, OpenDNS name servers are a good choice for many.
    openSUSE Leap 15.2; KDE Plasma 5

Page 7 of 8 FirstFirst ... 5678 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •