Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22

Thread: Optimus on Legacy Driver 340

  1. #11

    Default Re: Optimus on Legacy Driver 340

    bbswitch-kmp-default is auto select for install with bbswitch. Now i will reinstall opensuse 15.1 form zero and try again.

  2. #12
    Join Date
    Oct 2014
    Location
    Switzerland
    Posts
    455

    Default Re: Optimus on Legacy Driver 340

    Okay, give it a try, and hopefully everything will work.

  3. #13

    Default Re: Optimus on Legacy Driver 340

    Code:
    sudo systemctl enable bumblebeed
    linux-4j1s:/home/hristokz # sudo systemctl start bumblebeed
    linux-4j1s:/home/hristokz # sudo systemctl enable bbswitch
    Failed to enable unit: Unit file bbswitch.service does not exist.
    linux-4j1s:/home/hristokz # optirun --status
    [  255.314062] [ERROR]The Bumblebee daemon has not been started yet or the socket path /var/run/bumblebee.socket was incorrect.
    [  255.314133] [ERROR]Could not connect to bumblebee daemon - is it running?
    linux-4j1s:/home/hristokz # optirun glxgears 
    [  844.944853] [ERROR]The Bumblebee daemon has not been started yet or the socket path /var/run/bumblebee.socket was incorrect.
    [  844.944930] [ERROR]Could not connect to bumblebee daemon - is it running?
    Output form CUDA install: https://paste.opensuse.org/94504638
    Output from update on step 7: https://paste.opensuse.org/78517365

  4. #14
    Join Date
    Oct 2014
    Location
    Switzerland
    Posts
    455

    Default Re: Optimus on Legacy Driver 340

    Okay, that really beats me. You enabled and started bumblebeed and it's complaining that it's not running even when you check for status. Did you configure bumblebee correctly?

  5. #15

    Default Re: Optimus on Legacy Driver 340

    Code:
    bumblebeed]
    # The secondary Xorg server DISPLAY number
    VirtualDisplay=:8
    # Should the unused Xorg server be kept running? Set this to true if waiting
    # for X to be ready is too long and don't need power management at all.
    KeepUnusedXServer=false
    # The name of the Bumbleblee server group name (GID name)
    ServerGroup=bumblebee
    # Card power state at exit. Set to false if the card shoud be ON when Bumblebee
    # server exits.
    TurnCardOffAtExit=true
    # The default behavior of '-f' option on optirun. If set to "true", '-f' will
    # be ignored.
    NoEcoModeOverride=false
    # The Driver used by Bumblebee server. If this value is not set (or empty),
    # auto-detection is performed. The available drivers are nvidia and nouveau
    # (See also the driver-specific sections below)
    Driver=nvidia
    # Directory with a dummy config file to pass as a -configdir to secondary X
    XorgConfDir=/etc/bumblebee/xorg.conf.d
    Code:
    [driver-nvidia]
    # Module name to load, defaults to Driver if empty or unset
    KernelDriver=nvidia
    PMMethod=auto
    # colon-separated path to the nvidia libraries
    LibraryPath=/usr/lib64/:/usr/lib/
    # comma-separated path of the directory containing nvidia_drv.so and the
    # default Xorg modules path
    XorgModulePath=/usr/lib64/nvidia/xorg/,/usr/lib64/xorg/modules
    XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

  6. #16
    Join Date
    Oct 2014
    Location
    Switzerland
    Posts
    455

    Default Re: Optimus on Legacy Driver 340

    Did you also configure
    Code:
    /etc/modprobe.d/50-bbswitch.conf
    to
    Code:
    options bbswitch load_state=-1 unload_state=1
    If that doesn't work, then try switching back to
    Code:
    options bbswitch load_state=0 unload_state=1

  7. #17

    Default Re: Optimus on Legacy Driver 340

    After reverse -1 to 0
    Code:
    linux-4j1s:/home/hristokz # optirun --status
    Bumblebee status: Ready (3.2.1). X inactive. Discrete video card is off.
    
    linux-4j1s:/home/hristokz # optirun glxgears 
    [ 7636.797984] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver
    
    [ 7636.798066] [ERROR]Aborting because fallback start is disabled.
    linux-4j1s:/home/hristokz # sudo systemctl enable bbswitch
    Failed to enable unit: Unit file bbswitch.service does not exist.
    linux-4j1s:/home/hristokz # sudo systemctl enable bumblebeed
    linux-4j1s:/home/hristokz # sudo systemctl start bumblebeed
    linux-4j1s:/home/hristokz # optirun --status
    Bumblebee status: Error (3.2.1): Could not load GPU driver
    
    linux-4j1s:/home/hristokz # sudo systemctl restart bumblebeed
    linux-4j1s:/home/hristokz # optirun --status
    Bumblebee status: Ready (3.2.1). X inactive. Discrete video card is off.
    
    linux-4j1s:/home/hristokz # sudo systemctl enable bbswitch
    Failed to enable unit: Unit file bbswitch.service does not exist.
    linux-4j1s:/home/hristokz # optirun --status
    Bumblebee status: Ready (3.2.1). X inactive. Discrete video card is off.
    
    linux-4j1s:/home/hristokz # optirun glxgears 
    [ 7702.781141] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver
    
    [ 7702.781260] [ERROR]Aborting because fallback start is disabled.
    PS More info about the problem
    Code:
    dmesg | tail
    [ 8033.277872] NVRM: No NVIDIA graphics adapter found!
    [ 8033.278123] nvidia-nvlink: Unregistered the Nvlink Core, major device number 241
    [ 8042.123453] nvidia-nvlink: Nvlink Core is being initialized, major device number 241
    [ 8042.124320] NVRM: The NVIDIA GeForce GT 325M GPU installed in this system is
                   NVRM:  supported through the NVIDIA 340.xx Legacy drivers. Please
                   NVRM:  visit http://www.nvidia.com/object/unix.html for more
                   NVRM:  information.  The 440.64.00 NVIDIA driver will ignore
                   NVRM:  this GPU.  Continuing probe...
    [ 8042.124327] NVRM: No NVIDIA graphics adapter found!
    [ 8042.125018] nvidia-nvlink: Unregistered the Nvlink Core, major device number 241
    Code:
    optirun -vvv glxinfo
    [ 8298.794532] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
    [ 8298.795002] [INFO]Configured driver: nvidia
    [ 8298.795247] [DEBUG]optirun version 3.2.1 starting...
    [ 8298.795282] [DEBUG]Active configuration:
    [ 8298.795311] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
    [ 8298.795340] [DEBUG] X display: :8
    [ 8298.795360] [DEBUG] LD_LIBRARY_PATH: /usr/lib64/:/usr/lib/
    [ 8298.795380] [DEBUG] Socket path: /var/run/bumblebee.socket
    [ 8298.795403] [DEBUG] Accel/display bridge: auto
    [ 8298.795422] [DEBUG] VGL Compression: proxy
    [ 8298.795439] [DEBUG] VGLrun extra options: 
    [ 8298.795456] [DEBUG] Primus LD Path: /usr/lib64/primus:/usr/lib/primus
    [ 8298.795569] [DEBUG]Using auto-detected bridge virtualgl
    [ 8298.916941] [INFO]Response: No - error: Could not load GPU driver
    
    [ 8298.916994] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver
    
    [ 8298.917039] [DEBUG]Socket closed.
    [ 8298.917100] [ERROR]Aborting because fallback start is disabled.
    [ 8298.917111] [DEBUG]Killing all remaining processes.

  8. #18

    Default Re: Optimus on Legacy Driver 340

    after just 1 reboot:
    URL: https://paste.opensuse.org/61635743

  9. #19
    Join Date
    Oct 2014
    Location
    Switzerland
    Posts
    455

    Default Re: Optimus on Legacy Driver 340

    Okay, now we're getting a pretty good clue.

    [ 8042.124320] NVRM: The NVIDIA GeForce GT 325M GPU installed in this system is
    NVRM: supported through the NVIDIA 340.xx Legacy drivers. Please
    NVRM: visit http://www.nvidia.com/object/unix.html for more
    NVRM: information. The 440.64.00 NVIDIA driver will ignore
    NVRM: this GPU. Continuing probe...Since the beginning of your thread, trying to install Nvidai 340.00 legacy driver. Now, the "fun" part is that assuming that you aren't using cuda, find a matching driver version in the repository and to install a compatible version of it with bumblebee. Quite to be honest, I don't know if they have a compatible driver that old with bumblebee.

  10. #20

    Default Re: Optimus on Legacy Driver 340

    Hi SJLPHI


    http://download.opensuse.org/repositories/home:/Bumblebee-Project:/nVidia:/340.107/openSUSE_Leap_15.1/x86_64/


    This is the only driver for Leap 15.1 that i can find in OpenSUSE Repo. By your opinion is it viable option for driver or not. If not what is my other options: Older version of OpenSUSE or...

    Best regards Hristo

Page 2 of 3 FirstFirst 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •