Results 1 to 5 of 5

Thread: No sound aftert latest snapshot

  1. #1

    Default No sound aftert latest snapshot

    Dear all,

    after applying latest snapshot sound-subsystem is dead.

    Hardware: AMD Ryzen 1700x on Gigabyte X370 with soundcodec ALC1220

    Manual pulseaudio start with -v switch shows following console output:

    --------------------------------------------
    chris@zen:~> pulseaudio -v
    I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Die Operation ist nicht erlaubt
    I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Die Operation ist nicht erlaubt
    I: [pulseaudio] core-util.c: Successfully gained nice level -11.
    I: [pulseaudio] main.c: This is PulseAudio 13.0-rebootstrapped
    I: [pulseaudio] main.c: Page size is 4096 bytes
    I: [pulseaudio] main.c: Machine ID is c0d52149967b4c7bb41b3ba6906359f3.
    I: [pulseaudio] main.c: Session ID is 2.

    [...]

    I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="0" name="pci-0000_08_00.1" card_name="alsa_card.pci-0000_
    08_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties=
    "module-udev-detect.discovered=1"").
    I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:03.1/0000:08:00.1/sound/card0 (alsa_card.pci-0000_08_00.1) module loaded
    .
    I: [pulseaudio] alsa-ucm.c: UCM available for card hw:1
    I: [pulseaudio] alsa-ucm.c: Set UCM verb to HiFi
    W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device Mic1, assuming stereo duplex.
    W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device Mic2, assuming stereo duplex.
    W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device Line2, assuming stereo duplex.
    W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device Headphones, assuming stereo duplex.
    W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device Line1, assuming stereo duplex.
    W: [pulseaudio] alsa-ucm.c: UCM file does not specify 'PlaybackChannels' or 'CaptureChannels'for device Speaker, assuming stereo duplex.
    I: [pulseaudio] module-alsa-card.c: Found UCM profiles
    E: [pulseaudio] alsa-ucm.c: Assertion 'jack' failed at modules/alsa/alsa-ucm.c:2158, function device_add_hw_mute_jack(). Aborting.
    Abgebrochen (Speicherabzug geschrieben)

    Does anyone has an idea to sovle this?

    THX!

  2. #2

    Default Re: No sound aftert latest snapshot

    I've got a very similar configuration - Gigabyte GA-AX370-Gaming K7 with a Ryzen 1800X - and I'm experiencing the same issue. I'll post here when and if I find a solution.

  3. #3

    Default Re: No sound aftert latest snapshot

    Hi,

    found the solution. Copied from another installation on my Laptop following file (older status): HiFi-dual.conf

    from /usr/share/alsa/ucm2/HDA-Intel/ to the corresponding folder on the PC.
    Linked it that it will be started with pulseaudio start and voila sound on ..

    seems that the original file is corrupted.

    File data on request via email. DOnt know how to attach a 2kb file here...


  4. #4

    Default Re: No sound aftert latest snapshot

    I opened a bug for this here: https://github.com/alsa-project/alsa-ucm-conf/issues/14

    To get back to a working system, I did the following:

    Code:
    git clone https://github.com/alsa-project/alsa-ucm-conf.git
    cd alsa-ucm-conf
    git revert -n -X theirs 14c768eacd923c3b8bfe3dd027464a5d423e3773
    git revert -n -X theirs dfad18452427460bf50c55a2c06f9460b2db2123
    sudo cp ucm2/HDA\ Intel\ PCH/Hifi-Dual.conf /usr/share/alsa/ucm2/HDA-Intel/HiFi-dual.conf
    sudo reboot
    (Note that this won't produce a working source tree... I'm only trying to get back to a working version of the config file. I wouldn't try and actually compile what's there.)

  5. #5

    Default Re: No sound aftert latest snapshot

    Quote Originally Posted by quantamm View Post
    Well, that was quick. One of the alsa devs already pushed a change that should fix it. Now, we just need to wait for it to come downstream.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •