Results 1 to 3 of 3

Thread: Problem z zewnętrznym czytnikiem kart USB3.0.

  1. #1

    Default Problem z zewnętrznym czytnikiem kart USB3.0.

    Mam problem z zewnętrznym czytnikiem kart Unitek Y-3201 USB 3.0.
    Code:
    lsusb -d 05e3:0732 -v
    Bus 002 Device 002: ID 05e3:0732 Genesys Logic, Inc. All-in-One Cardreader
    Device Descriptor:
      bLength                18
      bDescriptorType         1
      bcdUSB               3.00
      bDeviceClass            0 
      bDeviceSubClass         0 
      bDeviceProtocol         0 
      bMaxPacketSize0         9
      idVendor           0x05e3 Genesys Logic, Inc.
      idProduct          0x0732 All-in-One Cardreader
      bcdDevice            5.67
      iManufacturer           3 Genesys 
      iProduct                4  USB3 Reader
      iSerial                 5 000000000148
      bNumConfigurations      1
      Configuration Descriptor:
        bLength                 9
        bDescriptorType         2
        wTotalLength       0x002c
        bNumInterfaces          1
        bConfigurationValue     1
        iConfiguration          0 
        bmAttributes         0x80
          (Bus Powered)
        MaxPower              896mA
        Interface Descriptor:
          bLength                 9
          bDescriptorType         4
          bInterfaceNumber        0
          bAlternateSetting       0
          bNumEndpoints           2
          bInterfaceClass         8 Mass Storage
          bInterfaceSubClass      6 SCSI
          bInterfaceProtocol     80 Bulk-Only
          iInterface              0 
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x81  EP 1 IN
            bmAttributes            2
              Transfer Type            Bulk
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0400  1x 1024 bytes
            bInterval               0
            bMaxBurst               4
          Endpoint Descriptor:
            bLength                 7
            bDescriptorType         5
            bEndpointAddress     0x02  EP 2 OUT
            bmAttributes            2
              Transfer Type            Bulk
              Synch Type               None
              Usage Type               Data
            wMaxPacketSize     0x0400  1x 1024 bytes
            bInterval               0
            bMaxBurst               4
    Binary Object Store Descriptor:
      bLength                 5
      bDescriptorType        15
      wTotalLength       0x0016
      bNumDeviceCaps          2
      USB 2.0 Extension Device Capability:
        bLength                 7
        bDescriptorType        16
        bDevCapabilityType      2
        bmAttributes   0x00000002
          HIRD Link Power Management (LPM) Supported
      SuperSpeed USB Device Capability:
        bLength                10
        bDescriptorType        16
        bDevCapabilityType      3
        bmAttributes         0x00
        wSpeedsSupported   0x000e
          Device can operate at Full Speed (12Mbps)
          Device can operate at High Speed (480Mbps)
          Device can operate at SuperSpeed (5Gbps)
        bFunctionalitySupport   1
          Lowest fully-functional device speed is Full Speed (12Mbps)
        bU1DevExitLat          10 micro seconds
        bU2DevExitLat        2047 micro seconds
    can't get debug descriptor: Resource temporarily unavailable
    Device Status:     0x0000
      (Bus Powered)
    Po włożeniu karty SD, jest ona widoczna ,ale nie można jej zamontować.
    Code:
    Dysk /dev/sdc: 116,16 GiB, bajtów: 124721823744, sektorów: 243597312
    Model dysku: STORAGE DEVICE  
    Jednostki: sektorów, czyli 1 * 512 = 512 bajtów
    Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512
    Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512
    Typ etykiety dysku: dos
    Identyfikator dysku: 0x00000000
    
    Urządzenie Rozruch Początek    Koniec   Sektory Rozmiar Id Typ
    /dev/sdc1             32768 243597311 243564544  116,1G  7 HPFS/NTFS/exFAT
    Code:
     mount /dev/sdc1 /mnt/test/
    mount: /mnt/test: nieznany typ systemu plików 'exfat'.
    Macie pomysł jak sobie z tym poradzić?

  2. #2
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    29,827
    Blog Entries
    15

    Default Re: Problem z zewnętrznym czytnikiem kart USB3.0.

    Code:
    zypper in fuse-exfat  exfat-utils
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    SUSE SLE, openSUSE Leap/Tumbleweed (x86_64) | GNOME DE
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!

  3. #3

    Default Re: Problem z zewnętrznym czytnikiem kart USB3.0. [SOLVED]

    Dziękuję.

    Działa.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •