Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: module load at bootup

  1. #11

    Default Re: module load at bootup

    Hello!
    I'm back to real PC now.
    After preparing /etc/modules-load.d/pata_via.conf as Malcolm advised and moving disk to IDE controller system boots as expected.
    Thank you Malcolm!

    File /etc/modprobe.d/50-newid.conf on real hardware is
    Code:
    install pata_via /sbin/modprobe --ignore-install pata_via; echo '1106 5337 1043 81cf' > '/sys/bus/pci/drivers/pata_via/new_id'
    and related output of lspci:

    Code:
    pedagog:/etc/modprobe.d # lspci -d 1106:5337 -v
    00:0f.0 IDE interface: VIA Technologies, Inc. Device 5337 (rev 07) (prog-if 8a [ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering])
            Subsystem: ASUSTeK Computer Inc. Device 81cf
            Flags: bus master, medium devsel, latency 32
            [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
            [virtual] Memory at 000003f0 (type 3, non-prefetchable)
            [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
            [virtual] Memory at 00000370 (type 3, non-prefetchable)
            I/O ports at fc00 [size=16]
            Capabilities: [c0] Power Management version 2
            Kernel driver in use: pata_via
            Kernel modules: sata_via, pata_acpi, ata_generic
    Will it help in improving module auto-loading ?

    BR, Kuba

  2. #12
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    27,548
    Blog Entries
    15

    Default Re: module load at bootup

    Quote Originally Posted by kglos View Post
    Hello!
    I'm back to real PC now.
    After preparing /etc/modules-load.d/pata_via.conf as Malcolm advised and moving disk to IDE controller system boots as expected.
    Thank you Malcolm!

    File /etc/modprobe.d/50-newid.conf on real hardware is
    Code:
    install pata_via /sbin/modprobe --ignore-install pata_via; echo '1106 5337 1043 81cf' > '/sys/bus/pci/drivers/pata_via/new_id'
    and related output of lspci:

    Code:
    pedagog:/etc/modprobe.d # lspci -d 1106:5337 -v
    00:0f.0 IDE interface: VIA Technologies, Inc. Device 5337 (rev 07) (prog-if 8a [ISA Compatibility mode controller, supports both channels switched to PCI native mode, supports bus mastering])
            Subsystem: ASUSTeK Computer Inc. Device 81cf
            Flags: bus master, medium devsel, latency 32
            [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
            [virtual] Memory at 000003f0 (type 3, non-prefetchable)
            [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
            [virtual] Memory at 00000370 (type 3, non-prefetchable)
            I/O ports at fc00 [size=16]
            Capabilities: [c0] Power Management version 2
            Kernel driver in use: pata_via
            Kernel modules: sata_via, pata_acpi, ata_generic
    Will it help in improving module auto-loading ?

    BR, Kuba
    Hi
    I would suggest a bug report against the kernel via openSUSE:Submitting bug reports - openSUSE

    Looks like the PCI ID needs to be added.... if you do create a bug report, post back the reference
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    SUSE SLE, openSUSE Leap/Tumbleweed (x86_64) | GNOME DE
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!

  3. #13

    Default Re: module load at bootup

    Quote Originally Posted by malcolmlewis View Post
    […]
    Looks like the PCI ID needs to be added.... if you do create a bug report, post back the reference
    Sorry for delay. Bug reference https://bugzilla.opensuse.org/show_bug.cgi?id=1160732

    BR,
    Kuba

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •