Results 1 to 8 of 8

Thread: Bumblebeed - No integrated video card found, quitting.

  1. #1
    Join Date
    Jul 2008
    Location
    Bogotá D.C, Colombia
    Posts
    27

    Default Bumblebeed - No integrated video card found, quitting.

    Hi all. I have TW with KDE5. I already have read all about bumblebee to get it working but, I'm unable to achieve it. I have an Asus X570zd with AMD Radeon Vega 8 gfx and Nvidia GTX1050.

    I have updated openSUSE with the latest stable kernel (I think) 5.2.11. I followed the official guide to install bumblebee but, for some reasone, it simple doesn't start.

    When I try with sudo bumblebeed start I get
    Code:
    [ERROR]No integrated video card found, quitting.
    So, basically I can't bumblebee working in my laptop.

    This is my hwinfo:

    Code:
    nestor@neoacevedo:~> /usr/sbin/hwinfo --gfxcard
    15: PCI 100.0: 0302 3D controller                               
      [Created at pci.386]
      Unique ID: VCu0.ULfTZ5jmRBA
      Parent ID: mnDB.fA+tdbAkMSD
      SysFS ID: /devices/pci0000:00/0000:00:01.1/0000:01:00.0
      SysFS BusID: 0000:01:00.0
      Hardware Class: graphics card
      Model: "nVidia GP107M [GeForce GTX 1050 Mobile]"
      Vendor: pci 0x10de "nVidia Corporation"
      Device: pci 0x1c8d "GP107M [GeForce GTX 1050 Mobile]"
      SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
      SubDevice: pci 0x11d1 
      Revision: 0xa1
      Driver: "nvidia"
      Driver Modules: "nvidia"
      Memory Range: 0xf6000000-0xf6ffffff (rw,non-prefetchable)
      Memory Range: 0xc0000000-0xcfffffff (ro,non-prefetchable)
      Memory Range: 0xd0000000-0xd1ffffff (ro,non-prefetchable)
      I/O Ports: 0xf000-0xf07f (rw)
      Memory Range: 0xf7000000-0xf707ffff (ro,non-prefetchable,disabled)
      IRQ: 53 (no events)
      Module Alias: "pci:v000010DEd00001C8Dsv00001043sd000011D1bc03sc02i00"
      Driver Info #0:
        Driver Status: nouveau is not active
        Driver Activation Cmd: "modprobe nouveau"
      Driver Info #1:
        Driver Status: nvidia_drm is active
        Driver Activation Cmd: "modprobe nvidia_drm"
      Driver Info #2:
        Driver Status: nvidia is active
        Driver Activation Cmd: "modprobe nvidia"
      Config Status: cfg=no, avail=yes, need=no, active=unknown
      Attached to: #24 (PCI bridge)
    
    29: PCI 400.0: 0300 VGA compatible controller (VGA)
      [Created at pci.386]
      Unique ID: YmUS.q5Ba9Q9Sfh7
      Parent ID: JZZT.A_VqgZKlSp2
      SysFS ID: /devices/pci0000:00/0000:00:08.1/0000:04:00.0
      SysFS BusID: 0000:04:00.0
      Hardware Class: graphics card
      Model: "ATI Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series]"
      Vendor: pci 0x1002 "ATI Technologies Inc"
      Device: pci 0x15dd "Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series]"
      SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
      SubDevice: pci 0x11d1 
      Revision: 0xc4
      Driver: "amdgpu"
      Driver Modules: "amdgpu"
      Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable)
      Memory Range: 0xf0000000-0xf01fffff (ro,non-prefetchable)
      I/O Ports: 0xc000-0xc0ff (rw)
      Memory Range: 0xf7500000-0xf757ffff (rw,non-prefetchable)
      IRQ: 60 (1027943 events)
      Module Alias: "pci:v00001002d000015DDsv00001043sd000011D1bc03sc00i00"
      Driver Info #0:
        Driver Status: amdgpu is active
        Driver Activation Cmd: "modprobe amdgpu"
      Config Status: cfg=no, avail=yes, need=no, active=unknown
      Attached to: #19 (PCI bridge)
    
    Primary display adapter: #29
    Inxi shows
    Code:
    nestor@neoacevedo:~> inxi -Gx
    Graphics:  Device-1: NVIDIA GP107M [GeForce GTX 1050 Mobile] vendor: ASUSTeK driver: nvidia v: 435.21 bus ID: 01:00.0 
               Device-2: AMD Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series] vendor: ASUSTeK driver: amdgpu v: kernel 
               bus ID: 04:00.0 
               Display: x11 server: X.org 1.20.5 driver: amdgpu resolution: <xdpyinfo missing> 
               OpenGL: renderer: AMD RAVEN (DRM 3.32.0 5.2.11-1-default LLVM 8.0.1) v: 4.5 Mesa 19.1.5 direct render: Yes
    But I don't know why the OpenGL renderer shows as AMD RAVEN. Anyone have achieved bumblebee works with AMD as iGPU and Nvidia as dGPU?

  2. #2
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    26,875
    Blog Entries
    15

    Default Re: Bumblebeed - No integrated video card found, quitting.

    Hi
    I don't think you need bumblebee, just vga switcheroo (part of the kernel and installable service) and run DRI_PRIME=1 <some app> to use the nvidia card...

    https://01.org/linuxgraphics/gfx-doc...witcheroo.html

    I'm guessing the AMD gpu is the integrated card, the nvidia is the discrete card.
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    SUSE SLE, openSUSE Leap/Tumbleweed (x86_64) | GNOME DE
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!

  3. #3

    Default Re: Bumblebeed - No integrated video card found, quitting.

    As far as I know switcheroo only works with the opensource driver (nouveau, radeon) and not the proprietary ones (nvidia, fglrx)

    If you've followed the guide at
    https://en.opensuse.org/SDB:NVIDIA_Bumblebee
    what does
    systemctl status bumblebeed
    give you?

    You could try
    suse-prime as another option if you need the nvidia proprietary driver installed.

  4. #4
    Join Date
    Nov 2009
    Location
    West Virginia Sector 13
    Posts
    15,748

    Default Re: Bumblebeed - No integrated video card found, quitting.

    Bumblebee is for Optimus hardware (Intel+NVIDIA). Don't know what you use with AMD+NVIDIA in a notebook. Possible you can select in the BIOS but the hardware may use some sort of Optimus clone.

  5. #5
    Join Date
    Dec 2008
    Location
    FL, USA
    Posts
    1,700

    Default Re: Bumblebeed - No integrated video card found, quitting.

    There's current mailing list thread started by someone who cannot make an AMD graphics+NVidia graphics combination work. Maybe it can't be done? I've only ever tried dual AMD, Intel+AMD or Intel+NVidia.
    Reg. Linux User #211409 *** multibooting since 1992
    Primary: 42.3,TW,15.0 & 13.1 on Haswell w/ RAID
    Secondary: eComStation (OS/2)&42.3 on 965P/Radeon
    Tertiary: TW,15.0,42.3,Fedora,Debian,more on Kaby Lake,Q45,Q43,G41,G3X,965G,Cedar,Caicos,Oland,GT218&&&

  6. #6
    Join Date
    Jul 2008
    Location
    Bogotá D.C, Colombia
    Posts
    27

    Default Re: Bumblebeed - No integrated video card found, quitting.

    Quote Originally Posted by FrankyU2 View Post
    If you've followed the guide at https://en.opensuse.org/SDB:NVIDIA_Bumblebee
    what does
    systemctl status bumblebeed
    give you?

    You could try
    suse-prime as another option if you need the nvidia proprietary driver installed.
    Code:
    nestor@neoacevedo:~> systemctl status bumblebeed
    ● bumblebeed.service - Bumblebee C Daemon
       Loaded: loaded (/usr/lib/systemd/system/bumblebeed.service; enabled; vendor preset: disabled)
       Active: activating (auto-restart) (Result: exit-code) since Sun 2019-09-15 15:13:51 -05; 5s ago
      Process: 3762 ExecStart=/usr/sbin/bumblebeed (code=exited, status=1/FAILURE)
     Main PID: 3762 (code=exited, status=1/FAILURE)
    suse-prime is for Intel/Nvidia

    Quote Originally Posted by gogalthorp View Post
    Bumblebee is for Optimus hardware (Intel+NVIDIA). Don't know what you use with AMD+NVIDIA in a notebook. Possible you can select in the BIOS but the hardware may use some sort of Optimus clone.
    Not at all true. Optimus hardware means Nvidia + another graphic. The guide puts as example Intel/Nvidia but it doesn't show that Bumblebee is only for Intel/Nvidia.

  7. #7
    Join Date
    Jul 2008
    Location
    Bogotá D.C, Colombia
    Posts
    27

    Default Re: Bumblebeed - No integrated video card found, quitting.

    Quote Originally Posted by malcolmlewis View Post
    Hi
    I don't think you need bumblebee, just vga switcheroo (part of the kernel and installable service) and run DRI_PRIME=1 <some app> to use the nvidia card...

    https://01.org/linuxgraphics/gfx-doc...witcheroo.html

    I'm guessing the AMD gpu is the integrated card, the nvidia is the discrete card.
    Yes, you're right. AMD gpu is the iGPU. DRI_PRIME=1 runs under AMD integrated graphic and what I want is to run specific apps with the Nvidia dGPU, just like in Windows (or closest).

  8. #8
    Join Date
    Jul 2008
    Location
    Bogotá D.C, Colombia
    Posts
    27

    Default Re: Bumblebeed - No integrated video card found, quitting.

    Quote Originally Posted by mrmazda View Post
    There's current mailing list thread started by someone who cannot make an AMD graphics+NVidia graphics combination work. Maybe it can't be done? I've only ever tried dual AMD, Intel+AMD or Intel+NVidia.
    Sorry, I tried to edit my last post but that option isn't enabled.

    I figured (without Bumblebee) to achieve some similar: https://www.forosuse.org/forosuse/sh...059#post203059
    In short words: when installing the privative Nvidia driver from the oficial repository, the installer doesn't create the file /usr/share/X11/xorg.conf.d/10-nvidia.config so, once I created this file with the configuration provided by Nvidia in the post https://devtalk.nvidia.com/default/t...60651/#5360651 I got openSUSE had the correct 3D renderer, so after that I installed suse-prime and finally I got, not as I expected to get PRIME working. Now I have to check if this configuration can be recognized by Bumblebee and bbswitch.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •