Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Incomplete standby

  1. #1

    Default Incomplete standby

    Hello

    I have a problem with my fresh installation of 15.1 (no upgrade).
    First, the system was shutting down or rebooting only after some (long) time.

    I uninstalled lvm2, liblvm2cmd2_02, liblvm2app2_2 and then shutdown and rebooting went fast.

    Next problem: When trying to suspend (standby, to RAM), the computer does not turn off the fan (and probably other things), but it turns off the monitor and network connections etc.

    I have a dual installation of OpenSuse 42.3 on the same (older) machine without such problems. The computer BIOS is from 2012.
    I'm still booting via boot manager from 42.3.

    The journal looks like below.

    Any ideas? Thank you!

    Code:
    Aug 14 11:35:58 linux-x6pk org_kde_powerdevil[1586]: powerdevil: Suspend session triggered with QMap(("Explicit", QVariant(bool, true))("Type", QVariant(uint, 1)))
    Aug 14 11:35:58 linux-x6pk org_kde_powerdevil[1586]: powerdevil: Suspend session triggered with QMap(("Explicit", QVariant(bool, true))("SkipFade", QVariant(bool, true))("Type", QVariant(uint, 1)))
    Aug 14 11:35:58 linux-x6pk org_kde_powerdevil[1586]: powerdevil: Starting Login1 suspend job
    Aug 14 11:35:58 linux-x6pk org_kde_powerdevil[1586]: powerdevil: Pausing all media players before suspending
    Aug 14 11:35:58 linux-x6pk kdeinit5[1471]: bluedevil: About to suspend
    Aug 14 11:35:58 linux-x6pk NetworkManager[933]: <info>  [1565775358.9202] manager: sleep: sleep requested (sleeping: no  enabled: yes)
    Aug 14 11:35:58 linux-x6pk NetworkManager[933]: <info>  [1565775358.9203] manager: NetworkManager state is now ASLEEP
    Aug 14 11:35:58 linux-x6pk dbus-daemon[784]: [system] Activating via systemd: service name='org.freedesktop.PackageKit' unit='packagekit.service' requested by ':1.39' (uid=1000 pid=1514 comm="/usr/bin/plasmashell ")
    Aug 14 11:35:58 linux-x6pk systemd[1]: Starting PackageKit Daemon...
    Aug 14 11:35:58 linux-x6pk systemd[1]: Reached target Sleep.
    Aug 14 11:35:58 linux-x6pk systemd[1]: Starting Suspend...
    Aug 14 11:35:58 linux-x6pk PackageKit[2448]: daemon start
    Aug 14 11:35:58 linux-x6pk systemd-sleep[2449]: INFO: Skip running /usr/lib/systemd/system-sleep/grub2.sleep for suspend
    Aug 14 11:35:58 linux-x6pk systemd-sleep[2449]: Suspending system...
    Aug 14 13:36:00 linux-x6pk kernel: PM: Syncing filesystems ... done.
    Aug 14 13:36:00 linux-x6pk kernel: PM: Preparing system for sleep (mem)
    Aug 14 13:36:00 linux-x6pk kernel: Freezing user space processes ... (elapsed 0.001 seconds) done.
    Aug 14 13:36:00 linux-x6pk kernel: OOM killer disabled.
    Aug 14 13:36:00 linux-x6pk kernel: Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
    Aug 14 13:36:00 linux-x6pk kernel: PM: Suspending system (mem)
    Aug 14 13:36:00 linux-x6pk kernel: Suspending console(s) (use no_console_suspend to debug)
    Aug 14 13:36:00 linux-x6pk kernel: sd 1:0:0:0: [sdb] Synchronizing SCSI cache
    Aug 14 13:36:00 linux-x6pk kernel: sd 1:0:0:0: [sdb] Stopping disk
    Aug 14 13:36:00 linux-x6pk kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
    Aug 14 13:36:00 linux-x6pk kernel: sd 0:0:0:0: [sda] Stopping disk
    Aug 14 13:36:00 linux-x6pk kernel: PM: suspend of devices complete after 602.719 msecs
    Aug 14 13:36:00 linux-x6pk kernel: PM: late suspend of devices complete after 20.215 msecs
    Aug 14 13:36:00 linux-x6pk kernel: PM: noirq suspend of devices complete after 20.026 msecs
    Aug 14 13:36:00 linux-x6pk kernel: ACPI: Preparing to enter system sleep state S3
    Aug 14 13:36:00 linux-x6pk kernel: PM: Saving platform NVS memory
    Aug 14 13:36:00 linux-x6pk kernel: Disabling non-boot CPUs ...
    Aug 14 13:36:00 linux-x6pk kernel: Broke affinity for irq 24
    Aug 14 13:36:00 linux-x6pk kernel: smpboot: CPU 1 is now offline
    Aug 14 13:36:00 linux-x6pk kernel: Broke affinity for irq 24
    Aug 14 13:36:00 linux-x6pk kernel: Broke affinity for irq 30
    Aug 14 13:36:00 linux-x6pk kernel: smpboot: CPU 2 is now offline
    Aug 14 13:36:00 linux-x6pk kernel: Broke affinity for irq 24
    Aug 14 13:36:00 linux-x6pk kernel: Broke affinity for irq 30
    Aug 14 13:36:00 linux-x6pk kernel: Broke affinity for irq 32
    Aug 14 13:36:00 linux-x6pk kernel: smpboot: CPU 3 is now offline
    Aug 14 13:36:00 linux-x6pk kernel: Enabling non-boot CPUs ...
    Aug 14 13:36:00 linux-x6pk kernel: x86: Booting SMP configuration:
    Aug 14 13:36:00 linux-x6pk kernel: smpboot: Booting Node 0 Processor 1 APIC 0x2
    Aug 14 13:36:00 linux-x6pk kernel:  cache: parent cpu1 should not be sleeping
    Aug 14 13:36:00 linux-x6pk kernel: CPU1 is up
    Aug 14 13:36:00 linux-x6pk kernel: smpboot: Booting Node 0 Processor 2 APIC 0x1
    Aug 14 13:36:00 linux-x6pk kernel:  cache: parent cpu2 should not be sleeping
    Aug 14 13:36:00 linux-x6pk kernel: CPU2 is up
    Aug 14 13:36:00 linux-x6pk kernel: smpboot: Booting Node 0 Processor 3 APIC 0x3
    Aug 14 13:36:00 linux-x6pk kernel:  cache: parent cpu3 should not be sleeping
    Aug 14 13:36:00 linux-x6pk kernel: CPU3 is up
    Aug 14 13:36:00 linux-x6pk kernel: ACPI: Waking up from system sleep state S3
    Aug 14 13:36:00 linux-x6pk kernel: PM: noirq resume of devices complete after 24.229 msecs
    Aug 14 13:36:00 linux-x6pk kernel: PM: early resume of devices complete after 0.358 msecs
    Aug 14 13:36:00 linux-x6pk kernel: usb usb1: root hub lost power or was reset
    Aug 14 13:36:00 linux-x6pk kernel: usb usb2: root hub lost power or was reset
    Aug 14 13:36:00 linux-x6pk kernel: sd 0:0:0:0: [sda] Starting disk
    Aug 14 13:36:00 linux-x6pk kernel: sd 1:0:0:0: [sdb] Starting disk
    Aug 14 13:36:00 linux-x6pk kernel: Suspended for 7199.236 seconds
    Aug 14 13:36:00 linux-x6pk kernel: r8169 0000:03:00.0 eth0: link down
    Aug 14 13:36:00 linux-x6pk kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Aug 14 13:36:00 linux-x6pk kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Aug 14 13:36:00 linux-x6pk kernel: ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20170303/psargs-330)
    Aug 14 13:36:00 linux-x6pk kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20170303/psparse-516)
    Aug 14 13:36:00 linux-x6pk kernel: ata1.00: supports DRM functions and may not be fully accessible
    Aug 14 13:36:00 linux-x6pk kernel: ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20170303/psargs-330)
    Aug 14 13:36:00 linux-x6pk kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT1._GTF, AE_NOT_FOUND (20170303/psparse-516)
    Aug 14 13:36:00 linux-x6pk kernel: ata1.00: disabling queued TRIM support
    Aug 14 13:36:00 linux-x6pk kernel: ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20170303/psargs-330)
    Aug 14 13:36:00 linux-x6pk kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20170303/psparse-516)
    Aug 14 13:36:00 linux-x6pk kernel: ata1.00: supports DRM functions and may not be fully accessible
    Aug 14 13:36:00 linux-x6pk kernel: ata1.00: disabling queued TRIM support
    Aug 14 13:36:00 linux-x6pk kernel: ata1.00: configured for UDMA/133
    Aug 14 13:36:00 linux-x6pk kernel: ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20170303/psargs-330)
    Aug 14 13:36:00 linux-x6pk kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT1._GTF, AE_NOT_FOUND (20170303/psparse-516)
    Aug 14 13:36:00 linux-x6pk kernel: ata2.00: configured for UDMA/100
    Aug 14 13:36:00 linux-x6pk kernel: PM: resume of devices complete after 1510.511 msecs
    Aug 14 13:36:00 linux-x6pk kernel: PM: Finishing wakeup.
    Aug 14 13:36:00 linux-x6pk kernel: OOM killer enabled.
    Aug 14 13:36:00 linux-x6pk plasmashell[1514]: Time engine Clock skew signaled
    Aug 14 13:36:03 linux-x6pk kernel: Restarting tasks ... done.
    Aug 14 13:36:03 linux-x6pk kernel: PM: Syncing filesystems ... done.
    Aug 14 13:36:03 linux-x6pk kernel: PM: Preparing system for sleep (standby)
    Aug 14 13:36:03 linux-x6pk kernel: Freezing user space processes ... (elapsed 0.001 seconds) done.
    Aug 14 13:36:03 linux-x6pk kernel: OOM killer disabled.
    Aug 14 13:36:03 linux-x6pk kernel: Freezing remaining freezable tasks ... (elapsed 0.102 seconds) done.
    Aug 14 13:36:03 linux-x6pk kernel: PM: Suspending system (standby)
    Aug 14 13:36:03 linux-x6pk kernel: Suspending console(s) (use no_console_suspend to debug)
    Aug 14 13:36:03 linux-x6pk kernel: sd 1:0:0:0: [sdb] Synchronizing SCSI cache
    Aug 14 13:36:03 linux-x6pk kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
    Aug 14 13:36:03 linux-x6pk kernel: sd 0:0:0:0: [sda] Stopping disk
    Aug 14 13:36:03 linux-x6pk kernel: sd 1:0:0:0: [sdb] Stopping disk
    Aug 14 13:36:03 linux-x6pk kernel: PM: suspend of devices complete after 596.232 msecs
    Aug 14 13:36:03 linux-x6pk kernel: PM: late suspend of devices complete after 18.800 msecs
    Aug 14 13:36:03 linux-x6pk kernel: PM: noirq suspend of devices complete after 19.932 msecs
    Aug 14 13:36:03 linux-x6pk kernel: ACPI: Preparing to enter system sleep state S1
    Aug 14 13:36:03 linux-x6pk kernel: PM: Saving platform NVS memory
    Aug 14 13:36:03 linux-x6pk kernel: Disabling non-boot CPUs ...
    Aug 14 13:36:03 linux-x6pk kernel: Broke affinity for irq 24
    Aug 14 13:36:03 linux-x6pk kernel: smpboot: CPU 1 is now offline
    Aug 14 13:36:03 linux-x6pk kernel: Broke affinity for irq 24
    Aug 14 13:36:03 linux-x6pk kernel: Broke affinity for irq 30
    Aug 14 13:36:03 linux-x6pk kernel: smpboot: CPU 2 is now offline
    Aug 14 13:36:03 linux-x6pk kernel: Broke affinity for irq 24
    Aug 14 13:36:03 linux-x6pk kernel: Broke affinity for irq 30
    Aug 14 13:36:03 linux-x6pk kernel: Broke affinity for irq 32
    Aug 14 13:36:03 linux-x6pk kernel: smpboot: CPU 3 is now offline
    Aug 14 13:36:03 linux-x6pk kernel: Enabling non-boot CPUs ...
    Aug 14 13:36:03 linux-x6pk kernel: x86: Booting SMP configuration:
    Aug 14 13:36:03 linux-x6pk kernel: smpboot: Booting Node 0 Processor 1 APIC 0x2
    Aug 14 13:36:03 linux-x6pk kernel:  cache: parent cpu1 should not be sleeping
    Aug 14 13:36:03 linux-x6pk kernel: CPU1 is up
    Aug 14 13:36:03 linux-x6pk kernel: smpboot: Booting Node 0 Processor 2 APIC 0x1
    Aug 14 13:36:03 linux-x6pk kernel:  cache: parent cpu2 should not be sleeping
    Aug 14 13:36:03 linux-x6pk kernel: CPU2 is up
    Aug 14 13:36:03 linux-x6pk kernel: smpboot: Booting Node 0 Processor 3 APIC 0x3
    Aug 14 13:36:03 linux-x6pk kernel:  cache: parent cpu3 should not be sleeping
    Aug 14 13:36:03 linux-x6pk kernel: CPU3 is up
    Aug 14 13:36:03 linux-x6pk kernel: ACPI: Waking up from system sleep state S1
    Aug 14 13:36:03 linux-x6pk kernel: PM: noirq resume of devices complete after 16.762 msecs
    Aug 14 13:36:03 linux-x6pk kernel: PM: early resume of devices complete after 0.368 msecs
    Aug 14 13:36:03 linux-x6pk kernel: usb usb1: root hub lost power or was reset
    Aug 14 13:36:03 linux-x6pk kernel: usb usb2: root hub lost power or was reset
    Aug 14 13:36:03 linux-x6pk kernel: sd 0:0:0:0: [sda] Starting disk
    Aug 14 13:36:03 linux-x6pk kernel: sd 1:0:0:0: [sdb] Starting disk
    Aug 14 13:36:03 linux-x6pk kernel: Suspended for 0.708 seconds
    Aug 14 13:36:03 linux-x6pk kernel: r8169 0000:03:00.0 eth0: link down
    Aug 14 13:36:03 linux-x6pk kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Aug 14 13:36:03 linux-x6pk kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Aug 14 13:36:03 linux-x6pk kernel: ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20170303/psargs-330)
    Aug 14 13:36:03 linux-x6pk kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20170303/psparse-516)
    Aug 14 13:36:03 linux-x6pk kernel: ata1.00: supports DRM functions and may not be fully accessible
    Aug 14 13:36:03 linux-x6pk kernel: ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20170303/psargs-330)
    Aug 14 13:36:03 linux-x6pk kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT1._GTF, AE_NOT_FOUND (20170303/psparse-516)
    Aug 14 13:36:03 linux-x6pk kernel: ata1.00: disabling queued TRIM support
    Aug 14 13:36:03 linux-x6pk kernel: ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SAT0.SPT0._GTF.DSSP], AE_NOT_FOUND (20170303/psargs-330)
    Aug 14 13:36:03 linux-x6pk kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF, AE_NOT_FOUND (20170303/psparse-516)
    Aug 14 13:36:03 linux-x6pk kernel: ata1.00: supports DRM functions and may not be fully accessible
    Aug 14 13:36:03 linux-x6pk kernel: ata1.00: disabling queued TRIM support
    Aug 14 13:36:03 linux-x6pk kernel: ata1.00: configured for UDMA/133
    Aug 14 13:36:03 linux-x6pk kernel: ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.SAT0.SPT1._GTF.DSSP], AE_NOT_FOUND (20170303/psargs-330)
    Aug 14 13:36:03 linux-x6pk kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT1._GTF, AE_NOT_FOUND (20170303/psparse-516)
    Aug 14 13:36:03 linux-x6pk kernel: ata2.00: configured for UDMA/100
    ...

  2. #2

    Default Re: Incomplete standby

    Forgot to mention:
    After such a partial standby -> resume, the OS-time is set to 2 hours in the future.
    File system is ext4.

  3. #3
    Join Date
    Jun 2008
    Location
    San Diego, Ca, USA
    Posts
    10,925
    Blog Entries
    2

    Default Re: Incomplete standby

    Your posted log snippet is only about 2 seconds long, obviously not minutes long so you either have to look for log entries over a longer period of time or consider that your machine is for some reason not shutting down promptly when the OS has shut down.

    TSU
    Beginner Wiki Quickstart - https://en.opensuse.org/User:Tsu2/Quickstart_Wiki
    Solved a problem recently? Create a wiki page for future personal reference!
    Learn something new?
    Attended a computing event?
    Post and Share!

  4. #4

    Default Re: Incomplete standby

    Quote Originally Posted by tsu2 View Post
    Your posted log snippet is only about 2 seconds long, obviously not minutes long so you either have to look for log entries over a longer period of time or consider that your machine is for some reason not shutting down promptly when the OS has shut down.

    TSU
    Thank you TSU.

    I'm not talking about shutdown, this problem was solved by uninstalling lvm2 packages.

    I am talking about "standby" or "suspend" (e.g. systemctl suspend).
    OpenSUSE 15.1 (Linux 4.12.14-lp151.28.10-default (x86_64)) on this machine does not suspend the cpu fan etc. but it turns off graphics etc.
    It also sets the time 2 hours to the future after resuming.
    Everything works fine with OpenSUSE 42.3 on the same machine (dual boot).

    There is nothing more happening after minutes, so I don't understand what a longer snippet could show.

    Thank you!

  5. #5
    Join Date
    Jun 2008
    Location
    Auckland, NZ
    Posts
    20,182
    Blog Entries
    1

    Default Re: Incomplete standby

    Any peripheral device waking the machine up unexpectedly perhaps?
    Code:
    cat /proc/acpi/wakeup
    openSUSE Leap 15.0; KDE Plasma 5

  6. #6

    Default Re: Incomplete standby

    Quote Originally Posted by deano_ferrari View Post
    Any peripheral device waking the machine up unexpectedly perhaps?
    Code:
    cat /proc/acpi/wakeup
    Thank you deano_ferrari.
    This is the result:

    Device S-state Status Sysfs node
    PS2K S4 *enabled pnp:00:06
    PS2M S4 *disabled
    P0P1 S4 *disabled
    RP01 S4 *disabled pci:0000:00:1c.0
    PXSX S4 *disabled
    RP02 S4 *disabled
    PXSX S4 *disabled
    RP03 S4 *disabled
    PXSX S4 *disabled
    RP04 S4 *disabled
    PXSX S4 *disabled
    RP05 S4 *disabled pci:0000:00:1c.4
    PXSX S4 *enabled pci:0000:03:00.0
    RP06 S4 *disabled pci:0000:00:1c.5
    PXSX S4 *enabled pci:0000:04:00.0
    RP07 S4 *disabled
    PXSX S4 *disabled
    RP08 S4 *disabled
    PXSX S4 *disabled
    PEG0 S4 *disabled pci:0000:00:01.0
    PEGP S4 *disabled
    PEG1 S4 *disabled
    PEG2 S4 *disabled
    PEG3 S4 *disabled
    GLAN S4 *disabled
    EHC1 S4 *enabled pci:0000:00:1d.0
    EHC2 S4 *enabled pci:0000:00:1a.0
    XHC S4 *disabled
    HDEF S4 *disabled pci:0000:00:1b.0
    PWRB S4 *enabled platform:PNP0C0C:00
    But the machine does not actually "wake up" before I press a key.
    The monitor remains dark until I press a key, it just does not turn off the fans (CPU/power) and probably other things.

    As I said, It works using OpenSUSE 42.3 on the same machine.
    The machine is 7 years old, but not prehistoric.

    -BIOS-
    Date : 05/03/2012
    Vendor : American Megatrends Inc. (www.ami.com)
    Version : 3509
    -Board-
    Name : S2-P8H61E
    Vendor : ASUSTeK COMPUTER INC. (SEAGATE, www.seagate.com)

    Thank you

  7. #7
    Join Date
    Jun 2008
    Location
    Auckland, NZ
    Posts
    20,182
    Blog Entries
    1

    Default Re: Incomplete standby

    For a more complete picture do
    Code:
    /sbin/lspci -nnk
    openSUSE Leap 15.0; KDE Plasma 5

  8. #8
    Join Date
    Jun 2008
    Location
    Auckland, NZ
    Posts
    20,182
    Blog Entries
    1

    Default Re: Incomplete standby

    openSUSE Leap 15.0; KDE Plasma 5

  9. #9

    Default Re: Incomplete standby

    Quote Originally Posted by deano_ferrari View Post
    For a more complete picture do
    Code:
    /sbin/lspci -nnk
    Thank you:

    00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller [8086:0150] (rev 09)
    Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
    Kernel driver in use: ivb_uncore
    Kernel modules: ie31200_edac
    00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09)
    Kernel driver in use: pcieport
    00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller [8086:0152] (rev 09)
    Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
    Kernel driver in use: i915
    Kernel modules: i915
    00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
    Subsystem: ASUSTeK Computer Inc. P8 series motherboard [1043:844d]
    Kernel driver in use: mei_me
    Kernel modules: mei_me
    00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05)
    Subsystem: ASUSTeK Computer Inc. P8 series motherboard [1043:844d]
    Kernel driver in use: ehci-pci
    Kernel modules: ehci_pci
    00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
    Subsystem: ASUSTeK Computer Inc. Device [1043:8415]
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel
    00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5)
    Kernel driver in use: pcieport
    00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5)
    Kernel driver in use: pcieport
    00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b5)
    Kernel driver in use: pcieport
    00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05)
    Subsystem: ASUSTeK Computer Inc. P8 series motherboard [1043:844d]
    Kernel driver in use: ehci-pci
    Kernel modules: ehci_pci
    00:1f.0 ISA bridge [0601]: Intel Corporation H61 Express Chipset Family LPC Controller [8086:1c5c] (rev 05)
    Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
    Kernel driver in use: lpc_ich
    Kernel modules: lpc_ich
    00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port Desktop SATA AHCI Controller [8086:1c02] (rev 05)
    Subsystem: ASUSTeK Computer Inc. P8 series motherboard [1043:844d]
    Kernel driver in use: ahci
    Kernel modules: ahci
    00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
    Subsystem: ASUSTeK Computer Inc. P8 series motherboard [1043:844d]
    Kernel driver in use: i801_smbus
    Kernel modules: i2c_i801
    03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
    Subsystem: ASUSTeK Computer Inc. P8P67 and other motherboards [1043:8432]
    Kernel driver in use: r8169
    Kernel modules: r8169
    04:00.0 USB controller [0c03]: ASMedia Technology Inc. ASM1042 SuperSpeed USB Host Controller [1b21:1042]
    Subsystem: ASUSTeK Computer Inc. P8B WS Motherboard [1043:8488]
    Kernel driver in use: xhci_hcd
    Kernel modules: xhci_pci

  10. #10

    Default Re: Incomplete standby

    Quote Originally Posted by deano_ferrari View Post
    Thank you.
    I'm not sure, as parts of the system do not go to sleep at all.
    So I'm not sure if it's a problem of "wakeups".

    But If you say it could have the same reasons, I could try this.

    Thanks.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •