Results 1 to 6 of 6

Thread: Recoll's web interface has stopped working

  1. #1

    Default Recoll's web interface has stopped working

    Since I updated my system to OpenSUSE LEAP 15.1, recollgui does not seem to properly start the bottle server. On the Web page, even on localhost, I get

    HTTP Status 404 – Not Found
    Type Status Report
    Message Not found
    Description The origin server did not find a current representation for the target resource or is not willing to disclose that one exists.
    Apache Tomcat/9.0.14

    systemctl says the service has exited:
    systemctl status recollgui

    ● recollgui.service - LSB: Starts the recoll bottle server
    Loaded: loaded (/etc/init.d/recollgui; generated; vendor preset: disabled)
    Active: active (exited) since Mon 2019-07-01 12:03:21 EDT; 2s ago
    Docs: man:systemd-sysv-generator(8)
    Process: 31692 ExecStop=/etc/init.d/recollgui stop (code=exited, status=0/SUCCESS)
    Process: 31724 ExecStart=/etc/init.d/recollgui start (code=exited, status=0/SUCCESS)
    Jul 01 12:03:21 jardell systemd[1]: Starting LSB: Starts the recoll bottle server...
    Jul 01 12:03:21 jardell recollgui[31724]: Running /etc/init.d/recollgui (start)...
    Jul 01 12:03:21 jardell recollgui[31724]: Done /etc/init.d/recollgui
    Jul 01 12:03:21 jardell systemd[1]: Started LSB: Starts the recoll bottle server.
    Jul 01 12:03:21 jardell sudo[31730]: root : TTY=unknown ; PWD=/ ; USER=recoll ; COMMAND=/var/re>

    I can find no error messages in the logs. The "official" build for recoll is for LEAP 15.0, and is about 8 versions old.



  2. #2
    Join Date
    Sep 2013
    Location
    Norfolk, UK
    Posts
    1,335

    Default Re: Recoll's web interface has stopped working

    Although a Recoll user myself, I don't use or have any experience of the web interface.


    If no forum users are able to help, you could perhaps raise an issue at https://opensourceprojects.eu/p/recollwebui/tickets/
    Regards, Paul

    2x Tumbleweed (Snapshot: 20191211) KDE Plasma 5
    2x Leap 15.1 KDE Plasma 5

  3. #3

    Default Re: Recoll's web interface has stopped working

    Quote Originally Posted by tannington View Post
    Although a Recoll user myself, I don't use or have any experience of the web interface.
    The recoll group said that whoever built the SUSE version needs to address this. Do try the web interface and see if it works for you. I cannot get recollgui to even change to start automatically in the Yast2 services GUI.

  4. #4
    Join Date
    Sep 2013
    Location
    Norfolk, UK
    Posts
    1,335

    Default Re: Recoll's web interface has stopped working

    Quote Originally Posted by jarome View Post
    Do try the web interface and see if it works for you.
    Sorry, I don't mind trying something I have installed, but I don't feel inclined to download recoll-webui and attempt to set it up.

    Hopefully another forum member may already be using it and could assist.

    Or, if the recoll support group are referring you back to openSUSE then consider submitting a bug report at: https://bugzilla.opensuse.org/index.cgi (same log-in credentials as these forums).
    Regards, Paul

    2x Tumbleweed (Snapshot: 20191211) KDE Plasma 5
    2x Leap 15.1 KDE Plasma 5

  5. #5

    Default Re: Recoll's web interface has stopped working

    is you get recoll from the suse rpm, it is installed/
    systemctrl start recollgui
    Then browse to 8080

  6. #6
    Join Date
    Sep 2013
    Location
    Norfolk, UK
    Posts
    1,335

    Default Re: Recoll's web interface has stopped working

    Quote Originally Posted by jarome View Post
    is you get recoll from the suse rpm, it is installed/
    Well, you use the web interface and I don't, so I won't argue the case.

    But that was not my understanding.
    Requirements

    All you need to use the WebUI is:

    Python 3
    cherrypy. You can remove this dependance and run with the internal bottle server by editing webui-standalone.py
    Recoll 1.17+
    web browser

    Download

    If your Recoll version is 1.18.2 or newer:
    https://github.com/koniu/recoll-webu...ive/master.zip
    If your Recoll version version is 1.17-1.18.1:
    https://github.com/koniu/recoll-webu...ve/v1.18.1.zip

    Information source: https://opensourceprojects.eu/p/reco...511cf71e/tree/



    systemctrl start recollgui
    Then browse to 8080
    Results in:
    Code:
    paul@Orion-15:~$ systemctl start recollgui
    Failed to start recollgui.service: Unit recollgui.service not found.
    paul@Orion-15:~$
    As I wrote earlier, perhaps someone who is using the web interface may be able to help, I'm sorry, I really can't assist you with this.
    Regards, Paul

    2x Tumbleweed (Snapshot: 20191211) KDE Plasma 5
    2x Leap 15.1 KDE Plasma 5

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •