Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 32

Thread: Applied recommended updates, Now can only reboot into command line mode

  1. #11
    Join Date
    Sep 2013
    Location
    Norfolk, UK
    Posts
    1,212

    Default Re: Applied recommended updates, Now can only reboot into command line mode

    Are you actually intending to run Tumbleweed? ...

    It looks as if you had been using the 42.3 release, in which case I suspect repository #3 ( openSUSE:Factory ) has been inadvertently added ( one-click install maybe? ) and is causing you grief...
    Regards, Paul

    Tumbleweed (Snapshot: 20190909) KDE Plasma 5
    Non-Tumbling Tumblweed (20150508) KDE 4 - Resurrected
    2x Leap 15.1 KDE Plasma 5

  2. #12
    Join Date
    Dec 2008
    Location
    FL, USA
    Posts
    1,634

    Default Re: Applied recommended updates, Now can only reboot into command line mode

    Quote Originally Posted by jmduffyjr View Post
    I was not quite sure what your reference to wrapping the paste and # reference was for.
    See if this helps.
    Reg. Linux User #211409 *** multibooting since 1992
    Primary: 42.3,TW,15.0 & 13.1 on Haswell w/ RAID
    Secondary: eComStation (OS/2)&42.3 on 965P/Radeon
    Tertiary: TW,15.0,42.3,Fedora,Debian,more on Kaby Lake,Q45,Q43,G41,G3X,965G,Cedar,Caicos,Oland,GT218&&&

  3. #13
    Join Date
    Apr 2018
    Location
    New England
    Posts
    32

    Default Re: Applied recommended updates, Now can only reboot into command line mode

    Quote Originally Posted by jmduffyjr View Post
    Here is the output of the two commands you requested. apologies the second file did not paste properly. I was not quite sure what your reference to wrapping the paste and # reference was for. Hopefully this is adequate.

    NAME="openSUSE Tumbleweed"
    # VERSION="20190520"
    ID="opensuse-tumbleweed"
    ID_LIKE="opensuse suse"
    VERSION_ID="20190520"
    PRETTY_NAME="openSUSE Tumbleweed"
    ANSI_COLOR="0;32"
    CPE_NAME="cpe:/opensuse:tumbleweed:20190520"
    BUG_REPORT_URL="https://bugs.opensuse.org"
    HOME_URL="https://www.opensuse.org/"
    LOGO="distributor-logo"


    Repository priorities are without effect. All enabled repositories share the same priority.






    # | Alias | Name | Enabled | GPG Check | Refresh | Priority | Type | URI | Service


    ---+-------------------------------------+-----------------------------------------+---------+-----------+---------+----------+----------+----------------------------------------------------------------------------------------------------------+--------


    1 | dvd | dvd | No | ---- | ---- | 99 | NONE | http://opensuse-guide-org/repo/openSUSE_Leap_42.3/ |


    2 | http-download.opensuse.org-37383dc7 | homeimi1970openSUSE:Extra | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/reposit...USE_Leap_42.3/ |


    3 | http-download.opensuse.org-9206a0a6 | openSUSE:Factory | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/tumbleweed/repo/oss/ |


    4 | http-download.opensuse.org-a1fb56f6 | Javapackages | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/reposit...USE_Leap_42.3/ |


    5 | http-download.opensuse.org-edbb5c05 | home:Mailaender:branches:Javapackages | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/reposit...USE_Leap_42.3/ |


    6 | http-ftp.uni-erlangen.de-b0b767ad | Packman Repository | No | ---- | ---- | 99 | rpm-md | http://ftp.uni-erlangen.de/pub/mirro...SUSE_Leap_42.3 |


    7 | jmd_Repository | jmd_Repository | Yes | ( p) Yes | No | 99 | plaindir | dir:///home/jmd/jmd_repository |


    8 | libdvdcss | libdvdcss | Yes | (r ) Yes | Yes | 99 | rpm-md | http://opensuse-guide.org/repo/openSUSE_Leap_42.3/ |


    9 | openSUSE-Leap-42.3-0 | openSUSE-Leap-42.3-0 | Yes | (r ) Yes | Yes | 99 | yast2 | hd:///?device=/dev/disk/by-id/usb-SanDisk_Cruzer_Glide_200443170018E1D166BF-0:0-part2 |


    10 | packman | packman | Yes | (r ) Yes | Yes | 99 | rpm-md | http://packman.inode.at/suse/openSUSE_Leap_42.3/ |


    11 | repo-debug | openSUSE-Leap-42.3-Debug | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/d...42.3/repo/oss/ |


    12 | repo-debug-non-oss | openSUSE-Leap-42.3-Debug-Non-Oss | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/d.../repo/non-oss/ |


    13 | repo-debug-update | openSUSE-Leap-42.3-Update-Debug | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/u...leap/42.3/oss/ |


    14 | repo-debug-update-non-oss | openSUSE-Leap-42.3-Update-Debug-Non-Oss | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/debug/u.../42.3/non-oss/ |


    15 | repo-non-oss | openSUSE-Leap-42.3-Non-Oss | Yes | (r ) Yes | Yes | 99 | yast2 | http://download.opensuse.org/distrib.../repo/non-oss/ |


    16 | repo-oss | openSUSE-Leap-42.3-Oss | Yes | (r ) Yes | Yes | 99 | yast2 | http://download.opensuse.org/distrib...42.3/repo/oss/ |


    17 | repo-source | openSUSE-Leap-42.3-Source | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/source/...42.3/repo/oss/ |


    18 | repo-source-non-oss | openSUSE-Leap-42.3-Source-Non-Oss | No | ---- | ---- | 99 | NONE | http://download.opensuse.org/source/.../repo/non-oss/ |


    19 | repo-update | openSUSE-Leap-42.3-Update | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/update/leap/42.3/oss/ |


    20 | repo-update-non-oss | openSUSE-Leap-42.3-Update-Non-Oss | Yes | (r ) Yes | Yes | 99 | rpm-md | http://download.opensuse.org/update/leap/42.3/non-oss/ |


    21 | skype-stable | skype (stable) | Yes | (r ) Yes | Yes | 99 | rpm-md | https://repo.skype.com/rpm/stable/ |


    22 | skypeforlinux | skypeforlinux | Yes | (r ) Yes | Yes | 99 | rpm-md | https://repo.skype.com/rpm/stable |




    Code:
    Repository priorities are without effect. All enabled repositories share the same priority.
    
    
    
    
    
    #  | Alias                               | Name                                    | Enabled | GPG Check | Refresh | Priority | Type     | URI                                                                                                      | Service
    
    
    ---+-------------------------------------+-----------------------------------------+---------+-----------+---------+----------+----------+----------------------------------------------------------------------------------------------------------+--------
    
    
     1 | dvd                                 | dvd                                     | No      | ----      | ----    |   99     | NONE     | http://opensuse-guide-org/repo/openSUSE_Leap_42.3/                                                       |        
    
    
     2 | http-download.opensuse.org-37383dc7 | home:Ximi1970:openSUSE:Extra            | Yes     | (r ) Yes  | Yes     |   99     | rpm-md   | http://download.opensuse.org/repositories/home:/Ximi1970:/openSUSE:/Extra/openSUSE_Leap_42.3/            |        
    
    
     3 | http-download.opensuse.org-9206a0a6 | openSUSE:Factory                        | Yes     | (r ) Yes  | Yes     |   99     | rpm-md   | http://download.opensuse.org/tumbleweed/repo/oss/                                                        |        
    
    
     4 | http-download.opensuse.org-a1fb56f6 | Java:packages                           | Yes     | (r ) Yes  | Yes     |   99     | rpm-md   | http://download.opensuse.org/repositories/Java:/packages/openSUSE_Leap_42.3/                             |        
    
    
     5 | http-download.opensuse.org-edbb5c05 | home:Mailaender:branches:Java:packages  | Yes     | (r ) Yes  | Yes     |   99     | rpm-md   | http://download.opensuse.org/repositories/home:/Mailaender:/branches:/Java:/packages/openSUSE_Leap_42.3/ |        
    
    
     6 | http-ftp.uni-erlangen.de-b0b767ad   | Packman Repository                      | No      | ----      | ----    |   99     | rpm-md   | http://ftp.uni-erlangen.de/pub/mirrors/packman/suse/openSUSE_Leap_42.3                                   |        
    
    
     7 | jmd_Repository                      | jmd_Repository                          | Yes     | ( p) Yes  | No      |   99     | plaindir | dir:///home/jmd/jmd_repository                                                                           |        
    
    
     8 | libdvdcss                           | libdvdcss                               | Yes     | (r ) Yes  | Yes     |   99     | rpm-md   | http://opensuse-guide.org/repo/openSUSE_Leap_42.3/                                                       |        
    
    
     9 | openSUSE-Leap-42.3-0                | openSUSE-Leap-42.3-0                    | Yes     | (r ) Yes  | Yes     |   99     | yast2    | hd:///?device=/dev/disk/by-id/usb-SanDisk_Cruzer_Glide_200443170018E1D166BF-0:0-part2                    |        
    
    
    10 | packman                             | packman                                 | Yes     | (r ) Yes  | Yes     |   99     | rpm-md   | http://packman.inode.at/suse/openSUSE_Leap_42.3/                                                         |        
    
    
    11 | repo-debug                          | openSUSE-Leap-42.3-Debug                | No      | ----      | ----    |   99     | NONE     | http://download.opensuse.org/debug/distribution/leap/42.3/repo/oss/                                      |        
    
    
    12 | repo-debug-non-oss                  | openSUSE-Leap-42.3-Debug-Non-Oss        | No      | ----      | ----    |   99     | NONE     | http://download.opensuse.org/debug/distribution/leap/42.3/repo/non-oss/                                  |        
    
    
    13 | repo-debug-update                   | openSUSE-Leap-42.3-Update-Debug         | No      | ----      | ----    |   99     | NONE     | http://download.opensuse.org/debug/update/leap/42.3/oss/                                                 |        
    
    
    14 | repo-debug-update-non-oss           | openSUSE-Leap-42.3-Update-Debug-Non-Oss | No      | ----      | ----    |   99     | NONE     | http://download.opensuse.org/debug/update/leap/42.3/non-oss/                                             |        
    
    
    15 | repo-non-oss                        | openSUSE-Leap-42.3-Non-Oss              | Yes     | (r ) Yes  | Yes     |   99     | yast2    | http://download.opensuse.org/distribution/leap/42.3/repo/non-oss/                                        |        
    
    
    16 | repo-oss                            | openSUSE-Leap-42.3-Oss                  | Yes     | (r ) Yes  | Yes     |   99     | yast2    | http://download.opensuse.org/distribution/leap/42.3/repo/oss/                                            |        
    
    
    17 | repo-source                         | openSUSE-Leap-42.3-Source               | No      | ----      | ----    |   99     | NONE     | http://download.opensuse.org/source/distribution/leap/42.3/repo/oss/                                     |        
    
    
    18 | repo-source-non-oss                 | openSUSE-Leap-42.3-Source-Non-Oss       | No      | ----      | ----    |   99     | NONE     | http://download.opensuse.org/source/distribution/leap/42.3/repo/non-oss/                                 |        
    
    
    19 | repo-update                         | openSUSE-Leap-42.3-Update               | Yes     | (r ) Yes  | Yes     |   99     | rpm-md   | http://download.opensuse.org/update/leap/42.3/oss/                                                       |        
    
    
    20 | repo-update-non-oss                 | openSUSE-Leap-42.3-Update-Non-Oss       | Yes     | (r ) Yes  | Yes     |   99     | rpm-md   | http://download.opensuse.org/update/leap/42.3/non-oss/                                                   |        
    
    
    21 | skype-stable                        | skype (stable)                          | Yes     | (r ) Yes  | Yes     |   99     | rpm-md   | https://repo.skype.com/rpm/stable/                                                                       |        
    
    
    22 | skypeforlinux                       | skypeforlinux                           | Yes     | (r ) Yes  | Yes     |   99     | rpm-md   | https://repo.skype.com/rpm/stable                                                                        |

  4. #14
    Join Date
    Apr 2018
    Location
    New England
    Posts
    32

    Default Re: Applied recommended updates, Now can only reboot into command line mode

    I do appreciate the assistance here. Based on the responses, it seems I have too many repositories? Do I have this correct? And they are conflicting meaning I have Tumbleweed and Leap?

    My original intent was to only have Leap. This is because I am a novice user and don't want to be fiddling with the frequency of Tumbleweed updates. I'd much rather the Leap frequency of once a year.

    What are the steps to resolve this?
    How do I, or do I need to get to a state before the updates? Is there a way to back out these updates?

    Then would I use Zypper and remove the unwanted repositories? Before applying updates again?

    please advise.

  5. #15
    Join Date
    Dec 2008
    Location
    FL, USA
    Posts
    1,634

    Default Re: Applied recommended updates, Now can only reboot into command line mode

    Please study https://forums.opensuse.org/showthre...und-Your-Paste before you do any more pasting here. The long lines of output that result when you don't use code tags to wrap your paste are very difficult to work with.

    If you disable the Factory/Tumbleweed, DVD & USB repos you may be able to resurrect your 42.3 via:
    Code:
    sudo zypper dup
    Those other optional repos make the possibility iffy. You should probably disable all except OSS, non-OSS, Update, Non-OSS-Update, and opensuse-guide, do the zypper dup, then add back the others that you know are needed.
    Reg. Linux User #211409 *** multibooting since 1992
    Primary: 42.3,TW,15.0 & 13.1 on Haswell w/ RAID
    Secondary: eComStation (OS/2)&42.3 on 965P/Radeon
    Tertiary: TW,15.0,42.3,Fedora,Debian,more on Kaby Lake,Q45,Q43,G41,G3X,965G,Cedar,Caicos,Oland,GT218&&&

  6. #16
    Join Date
    Nov 2009
    Location
    West Virginia Sector 13
    Posts
    15,699

    Default Re: Applied recommended updates, Now can only reboot into command line mode

    The question is do you want 42.3 or TX????

    Mixing TW and LEAP will break things for sure.

    You don't necessarily have too many just mixed version.

    So to move to TW make OSS, non-OSS, Update, Non-OSS-Update disable all others at this point then point them to TW
    To move back to 42.3 remove or disable the TW repo you have

    Then do a zypper dup to get to the desired OS. You can add back the other repos being sure that they point to your current OS Best not to try it all in one step

  7. #17
    Join Date
    Apr 2018
    Location
    New England
    Posts
    32

    Default Re: Applied recommended updates, Now can only reboot into command line mode

    Quote Originally Posted by tannington View Post
    Are you actually intending to run Tumbleweed? ...

    It looks as if you had been using the 42.3 release, in which case I suspect repository #3 ( openSUSE:Factory ) has been inadvertently added ( one-click install maybe? ) and is causing you grief...

    I built this system using the Leap install. I did not want Tumbleweed because I'm not a developer or an expert with SuSE. So I wanted to keep patching and maintenance on an annual basis.

    The system prompted me for applying recommended updates. I'm sorry that's all that was in the message. Stupidly I did.

    When the maintenance asked me to reboot, it booted into Tumbleweed. I'm 99.9% sure my base system is Leap. The 42.3 release you are referring to.
    How do I get back to that Leap system?

  8. #18
    Join Date
    Jun 2008
    Location
    Netherlands
    Posts
    24,978

    Default Re: Applied recommended updates, Now can only reboot into command line mode

    It seems that you are a victim of the one-click install.

    Assaid earlier, when you want a Leap 42.3 system, carefully check that you have only 42.3 repos active. When you have any repos that point to Tumbleweed then remove them.
    Also as long as yopu are recovering, disable all extra repos you may have added.

    Then do
    Code:
    zypper dup
    You now should have a running 42.3.

    Report back on how that works.
    Henk van Velden

  9. #19
    Join Date
    Apr 2018
    Location
    New England
    Posts
    32

    Default Re: Applied recommended updates, Now can only reboot into command line mode

    I removed the Tumbleweed repo. I also disabled some of the other repo's that I felt were not needed.

    I kept the repo's that you suggested active. The OSS, NON-OSS, UPDATE, NON-OSS-UPDATE

    I ran the command Zypper dup and received the following error message.

    symbol look up error: /usr/lib64/libproxy.so.1: undefined symbol: _ZN9libmodman14module_manager8load_dirENst7_cxx1112basic_stringlcst11char_traitslcESalceeeb


    I'm going to search the Forum for this message and see if there are any hits. Any thoughts on this message?

  10. #20
    Join Date
    Sep 2013
    Location
    Norfolk, UK
    Posts
    1,212

    Default Re: Applied recommended updates, Now can only reboot into command line mode

    Need to see what versions of zypper, libmodman and libproxy you have installed - they may still be "mix n match" with tumbleweed.

    Could you post the result of running the following:

    Code:
    rpm -qi zypper libmodman1 libproxy1
    Regards, Paul

    Tumbleweed (Snapshot: 20190909) KDE Plasma 5
    Non-Tumbling Tumblweed (20150508) KDE 4 - Resurrected
    2x Leap 15.1 KDE Plasma 5

Page 2 of 4 FirstFirst 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •