Results 1 to 7 of 7

Thread: Opensuse LEAP 15.1 i Radeon RX560

  1. #1

    Default Opensuse LEAP 15.1 i Radeon RX560

    Mam zainstalowane:
    Code:
    kernel-firmware-20190118-lp150.2.12.1
    
    xf86-video-amdgpu-18.0.1-lp150.1.1
    Pomimo to maksymalna rozdzielczość to 800x600

    Code:
     hwinfo --gfx
    20: PCI 500.0: 0300 VGA compatible controller (VGA)             
      [Created at pci.386]
      Unique ID: Ddhb.VYM+XMk86m9
      Parent ID: JZZT.A_VqgZKlSp2
      SysFS ID: /devices/pci0000:00/0000:00:08.1/0000:05:00.0
      SysFS BusID: 0000:05:00.0
      Hardware Class: graphics card
      Model: "ATI Picasso"
      Vendor: pci 0x1002 "ATI Technologies Inc"
      Device: pci 0x15d8 "Picasso"
      SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
      SubDevice: pci 0x1eae 
      Revision: 0xc2
      Memory Range: 0xc0000000-0xcfffffff (ro,non-prefetchable)
      Memory Range: 0xd0000000-0xd01fffff (ro,non-prefetchable)
      I/O Ports: 0xb000-0xbfff (rw,disabled)
      Memory Range: 0xfe500000-0xfe57ffff (rw,non-prefetchable)
      IRQ: 255 (no events)
      Module Alias: "pci:v00001002d000015D8sv00001043sd00001EAEbc03sc00i00"
      Config Status: cfg=no, avail=yes, need=no, active=unknown
      Attached to: #11 (PCI bridge)
    
    37: PCI 100.0: 0380 Display controller
      [Created at pci.386]
      Unique ID: VCu0.xOaEH+tOOxB
      Parent ID: mnDB.pKxIWxtK6N4
      SysFS ID: /devices/pci0000:00/0000:00:01.1/0000:01:00.0
      SysFS BusID: 0000:01:00.0
      Hardware Class: graphics card
      Model: "ATI Baffin [Radeon RX 460/560D / Pro 450/455/460/555/555X/560/560X]"
      Vendor: pci 0x1002 "ATI Technologies Inc"
      Device: pci 0x67ef "Baffin [Radeon RX 460/560D / Pro 450/455/460/555/555X/560/560X]"
      SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
      SubDevice: pci 0x1eae 
      Revision: 0xe5
      Driver: "amdgpu"
      Driver Modules: "amdgpu"
      Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable)
      Memory Range: 0xf0000000-0xf01fffff (ro,non-prefetchable)
      I/O Ports: 0xf000-0xffff (rw)
      Memory Range: 0xfea00000-0xfea3ffff (rw,non-prefetchable)
      Memory Range: 0xfea40000-0xfea5ffff (ro,non-prefetchable,disabled)
      IRQ: 311 (50 events)
      Module Alias: "pci:v00001002d000067EFsv00001043sd00001EAEbc03sc80i00"
      Driver Info #0:
        Driver Status: amdgpu is active
        Driver Activation Cmd: "modprobe amdgpu"
      Config Status: cfg=no, avail=yes, need=no, active=unknown
      Attached to: #17 (PCI bridge)
    
    Primary display adapter: #20
    Próbowałem instalować sterowniki AMD ale wyskakuje coś takiego:
    Code:
    ./amdgpu-install -y
    tee: /etc/yum.repos.d/amdgpu-pro-local.repo: Nie ma takiego pliku ani katalogu
    [amdgpu-pro-local]
    Name=AMD amdgpu Pro local repository
    baseurl=file:///var/opt/amdgpu-pro-local
    enabled=1
    gpgcheck=0
    Macie pomysł jak poprawnie zainstalować sterowniki?

  2. #2
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    27,110
    Blog Entries
    15

    Default Re: Opensuse LEAP 15.1 i Radeon RX560

    Code:
    /sbin/lspci -nnk | egrep -A3 "VGA|Display|3D"
    
    eg;
    /sbin/lspci -nnk | egrep -A3 "VGA|Display|3D"
    
    00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Wani [Radeon R5/R6/R7 Graphics] [1002:9874] (rev ca)
        Subsystem: Hewlett-Packard Company Device [103c:81fe]
        Kernel driver in use: amdgpu
        Kernel modules: amdgpu
    --
    04:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] Topaz XT [Radeon R7 M260/M265 / M340/M360 / M440/M445] [1002:6900] (rev 83)
        DeviceName: AMD Radeon (TM) R7 440M
        Subsystem: Hewlett-Packard Company Device [103c:81fe]
        Kernel driver in use: amdgpu
    No amdgpu-pro
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    SUSE SLE, openSUSE Leap/Tumbleweed (x86_64) | GNOME DE
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!

  3. #3

    Default Re: Opensuse LEAP 15.1 i Radeon RX560X

    Code:
    /sbin/lspci -nnk | egrep -A3 "VGA|Display|3D"
    01:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] Baffin [Radeon RX 460/560D / Pro 450/455/460/560] [1002:67ef] (rev e5)
            Subsystem: ASUSTeK Computer Inc. Device [1043:1eae]
            Kernel driver in use: amdgpu
            Kernel modules: amdgpu
    --
    05:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:15d8] (rev c2)
            Subsystem: ASUSTeK Computer Inc. Device [1043:1eae]
    05:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:15de]
            Subsystem: ASUSTeK Computer Inc. Device [1043:17c1]
    Jak zmienić rozdzielczość?

  4. #4
    Join Date
    Jun 2008
    Location
    Podunk
    Posts
    27,110
    Blog Entries
    15

    Default Re: Opensuse LEAP 15.1 i Radeon RX560X

    Quote Originally Posted by rilicek View Post
    Code:
    /sbin/lspci -nnk | egrep -A3 "VGA|Display|3D"
    01:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] Baffin [Radeon RX 460/560D / Pro 450/455/460/560] [1002:67ef] (rev e5)
            Subsystem: ASUSTeK Computer Inc. Device [1043:1eae]
            Kernel driver in use: amdgpu
            Kernel modules: amdgpu
    --
    05:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:15d8] (rev c2)
            Subsystem: ASUSTeK Computer Inc. Device [1043:1eae]
    05:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:15de]
            Subsystem: ASUSTeK Computer Inc. Device [1043:17c1]
    Jak zmienić rozdzielczość?
    Domyślam się, że używasz VGA, a nie Display.

    Czy możesz opublikować wyjście;

    Code:
    cat ~/.local/share/xorg/Xorg.log.0
    Prześlij do https://susepaste.org/

    Zobacz także https://ubuntuforums.org/showthread.php?t=2412254

    Ale myślę, że potrzebujesz późniejszego jądra, możesz wypróbować wersję Tumbleweed na żywo na USB?

    Uwaga: Tłumaczenie za pośrednictwem https://translate.google.com/
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    SUSE SLE, openSUSE Leap/Tumbleweed (x86_64) | GNOME DE
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!

  5. #5

    Default Re: Opensuse LEAP 15.1 i Radeon RX560

    Code:
    cat ~/.local/share/xorg/Xorg.log.0
    cat: /root/.local/share/xorg/Xorg.log.0: Nie ma takiego pliku ani katalogu
    
    share # ls
    baloo          kactivitymanagerd  konsole   kxmlgui5         recently-used.xbel  user-places.xbel
    dolphin        kded5              krusader  mc               sddm                user-places.xbel.bak
    gvfs-metadata  klipper            kscreen   RecentDocuments  Trash               user-places.xbel.tbcache
    Mam nowego świeżego kompa. Spróbuję zainstalować Tumbleweed.
    /I've a new fresh computer. I'll try to install Tumbleweed./

  6. #6
    Join Date
    Jun 2008
    Location
    Wola (PL)
    Posts
    64

    Default Odp: Opensuse LEAP 15.1 i Radeon RX560

    AMD ma teraz ładną instrukcję:

    https://amdgpu-install.readthedocs.io/en/latest/ ;-)
    Pozdrawiam / Greetings,
    Mariusz Fik
    openSUSE Community Member

  7. #7

    Default Re: Odp: Opensuse LEAP 15.0 i Radeon RX560X [SOLVED}

    Quote Originally Posted by Fisiu View Post
    AMD ma teraz ładną instrukcję:

    https://amdgpu-install.readthedocs.io/en/latest/ ;-)
    Stamtąd brałem sterowniki. Nie działały.

    Za radą @malcolmlewis zainstalowałem Tumbleweed.

    Rozdzielczość jest OK.

    Nowsze jajko pomogło.

    Code:
    uname -r
    5.0.13-1-default

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •