Opensuse LEAP 15.1 i Radeon RX560

[rilicek]

Mam zainstalowane:

kernel-firmware-20190118-lp150.2.12.1

xf86-video-amdgpu-18.0.1-lp150.1.1

Pomimo to maksymalna rozdzielczość to 800x600

 hwinfo --gfx
20: PCI 500.0: 0300 VGA compatible controller (VGA)             
  [Created at pci.386]
  Unique ID: Ddhb.VYM+XMk86m9
  Parent ID: JZZT.A_VqgZKlSp2
  SysFS ID: /devices/pci0000:00/0000:00:08.1/0000:05:00.0
  SysFS BusID: 0000:05:00.0
  Hardware Class: graphics card
  Model: "ATI Picasso"
  Vendor: pci 0x1002 "ATI Technologies Inc"
  Device: pci 0x15d8 "Picasso"
  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
  SubDevice: pci 0x1eae 
  Revision: 0xc2
  Memory Range: 0xc0000000-0xcfffffff (ro,non-prefetchable)
  Memory Range: 0xd0000000-0xd01fffff (ro,non-prefetchable)
  I/O Ports: 0xb000-0xbfff (rw,disabled)
  Memory Range: 0xfe500000-0xfe57ffff (rw,non-prefetchable)
  IRQ: 255 (no events)
  Module Alias: "pci:v00001002d000015D8sv00001043sd00001EAEbc03sc00i00"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #11 (PCI bridge)

37: PCI 100.0: 0380 Display controller
  [Created at pci.386]
  Unique ID: VCu0.xOaEH+tOOxB
  Parent ID: mnDB.pKxIWxtK6N4
  SysFS ID: /devices/pci0000:00/0000:00:01.1/0000:01:00.0
  SysFS BusID: 0000:01:00.0
  Hardware Class: graphics card
  Model: "ATI Baffin [Radeon RX 460/560D / Pro 450/455/460/555/555X/560/560X]"
  Vendor: pci 0x1002 "ATI Technologies Inc"
  Device: pci 0x67ef "Baffin [Radeon RX 460/560D / Pro 450/455/460/555/555X/560/560X]"
  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
  SubDevice: pci 0x1eae 
  Revision: 0xe5
  Driver: "amdgpu"
  Driver Modules: "amdgpu"
  Memory Range: 0xe0000000-0xefffffff (ro,non-prefetchable)
  Memory Range: 0xf0000000-0xf01fffff (ro,non-prefetchable)
  I/O Ports: 0xf000-0xffff (rw)
  Memory Range: 0xfea00000-0xfea3ffff (rw,non-prefetchable)
  Memory Range: 0xfea40000-0xfea5ffff (ro,non-prefetchable,disabled)
  IRQ: 311 (50 events)
  Module Alias: "pci:v00001002d000067EFsv00001043sd00001EAEbc03sc80i00"
  Driver Info #0:
    Driver Status: amdgpu is active
    Driver Activation Cmd: "modprobe amdgpu"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #17 (PCI bridge)

Primary display adapter: #20

Próbowałem instalować sterowniki AMD ale wyskakuje coś takiego:

./amdgpu-install -y
tee: /etc/yum.repos.d/amdgpu-pro-local.repo: Nie ma takiego pliku ani katalogu
[amdgpu-pro-local]
Name=AMD amdgpu Pro local repository
baseurl=file:///var/opt/amdgpu-pro-local
enabled=1
gpgcheck=0

Macie pomysł jak poprawnie zainstalować sterowniki?

[malcolmlewis]

/sbin/lspci -nnk | egrep -A3 "VGA|Display|3D"

eg;
/sbin/lspci -nnk | egrep -A3 "VGA|Display|3D"

00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Wani [Radeon R5/R6/R7 Graphics] [1002:9874] (rev ca)
    Subsystem: Hewlett-Packard Company Device [103c:81fe]
    Kernel driver in use: amdgpu
    Kernel modules: amdgpu
--
04:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] Topaz XT [Radeon R7 M260/M265 / M340/M360 / M440/M445] [1002:6900] (rev 83)
    DeviceName: AMD Radeon (TM) R7 440M
    Subsystem: Hewlett-Packard Company Device [103c:81fe]
    Kernel driver in use: amdgpu

No amdgpu-pro

[rilicek]

/sbin/lspci -nnk | egrep -A3 "VGA|Display|3D"
01:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] Baffin [Radeon RX 460/560D / Pro 450/455/460/560] [1002:67ef] (rev e5)
        Subsystem: ASUSTeK Computer Inc. Device [1043:1eae]
        Kernel driver in use: amdgpu
        Kernel modules: amdgpu
--
05:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:15d8] (rev c2)
        Subsystem: ASUSTeK Computer Inc. Device [1043:1eae]
05:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:15de]
        Subsystem: ASUSTeK Computer Inc. Device [1043:17c1]

Jak zmienić rozdzielczość?

[malcolmlewis]

/sbin/lspci -nnk | egrep -A3 "VGA|Display|3D"
01:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] Baffin [Radeon RX 460/560D / Pro 450/455/460/560] [1002:67ef] (rev e5)
        Subsystem: ASUSTeK Computer Inc. Device [1043:1eae]
        Kernel driver in use: amdgpu
        Kernel modules: amdgpu
--
05:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:15d8] (rev c2)
        Subsystem: ASUSTeK Computer Inc. Device [1043:1eae]
05:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:15de]
        Subsystem: ASUSTeK Computer Inc. Device [1043:17c1]

Jak zmienić rozdzielczość?

Domyślam się, że używasz VGA, a nie Display.

Czy możesz opublikować wyjście;

cat ~/.local/share/xorg/Xorg.log.0

Prześlij do https://susepaste.org/

Zobacz także https://ubuntuforums.org/showthread.php?t=2412254

Ale myślę, że potrzebujesz późniejszego jądra, możesz wypróbować wersję Tumbleweed na żywo na USB?

Uwaga: Tłumaczenie za pośrednictwem https://translate.google.com/

[rilicek]

cat ~/.local/share/xorg/Xorg.log.0
cat: /root/.local/share/xorg/Xorg.log.0: Nie ma takiego pliku ani katalogu

share # ls
baloo          kactivitymanagerd  konsole   kxmlgui5         recently-used.xbel  user-places.xbel
dolphin        kded5              krusader  mc               sddm                user-places.xbel.bak
gvfs-metadata  klipper            kscreen   RecentDocuments  Trash               user-places.xbel.tbcache

Mam nowego świeżego kompa. Spróbuję zainstalować Tumbleweed.
/I've a new fresh computer. I'll try to install Tumbleweed./

[Fisiu]

AMD ma teraz ładną instrukcję:

https://amdgpu-install.readthedocs.io/en/latest/ ;-)

[rilicek]

AMD ma teraz ładną instrukcję:

https://amdgpu-install.readthedocs.io/en/latest/ ;-)

Stamtąd brałem sterowniki. Nie działały.

Za radą @malcolmlewis zainstalowałem Tumbleweed.

Rozdzielczość jest OK.

Nowsze jajko pomogło.

uname -r
5.0.13-1-default