Results 1 to 5 of 5

Thread: externe DVD werkt niet goed

  1. #1

    Default externe DVD werkt niet goed

    Mijn oude computer was aan vervanging toe, en dus een nieuwe laten bouwen (door mijn zoon)
    Nu heb ik dus een externe DVD drive die ik af en toe gebruik.
    (Voornamelijk om mijn dvd collectie op HDD te zetten dmv het programma Handbrake)
    Het probleem is als ik er een orginele DVD in stop de videokwaliteit belabberd is (blokkerig)
    Ik kan de dvd wel openen en de inhoud lezen.
    Maar als ik een video file (.VOB) naar de HDD kopieer dan is ook dat bestand op de HDD blokkerig.

    Ik heb nog een "oude" hp-laptop waarop linux Mint is geïnstalleerd, en daar werkt de drive wel op.

    Code:
    [jsteen@linux-y4bz ~]$ dmesg | grep -i usb                           
    [    5.247514] ACPI: bus type USB registered
    [    5.247540] usbcore: registered new interface driver usbfs
    [    5.247551] usbcore: registered new interface driver hub
    [    5.247607] usbcore: registered new device driver usb
    [    5.255586] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
    [    5.308807] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
    [    5.308810] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    5.308811] usb usb1: Product: xHCI Host Controller
    [    5.308813] usb usb1: Manufacturer: Linux 5.0.9-1-default xhci-hcd
    [    5.308814] usb usb1: SerialNumber: 0000:01:00.0
    [    5.308978] hub 1-0:1.0: USB hub found
    [    5.309463] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
    [    5.309466] xhci_hcd 0000:01:00.0: Host supports USB 3.10 Enhanced SuperSpeed
    [    5.309506] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
    [    5.309528] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
    [    5.309529] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    5.309531] usb usb2: Product: xHCI Host Controller
    [    5.309532] usb usb2: Manufacturer: Linux 5.0.9-1-default xhci-hcd
    [    5.309533] usb usb2: SerialNumber: 0000:01:00.0
    [    5.309649] hub 2-0:1.0: USB hub found
    [    5.309782] usb: port power management may be unreliable
    [    5.310125] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3
    [    5.369269] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
    [    5.369271] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    5.369272] usb usb3: Product: xHCI Host Controller
    [    5.369272] usb usb3: Manufacturer: Linux 5.0.9-1-default xhci-hcd
    [    5.369273] usb usb3: SerialNumber: 0000:08:00.0
    [    5.369390] hub 3-0:1.0: USB hub found
    [    5.369518] xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 4
    [    5.369520] xhci_hcd 0000:08:00.0: Host supports USB 3.1 Enhanced SuperSpeed
    [    5.369545] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
    [    5.369564] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
    [    5.369565] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    5.369566] usb usb4: Product: xHCI Host Controller
    [    5.369567] usb usb4: Manufacturer: Linux 5.0.9-1-default xhci-hcd
    [    5.369568] usb usb4: SerialNumber: 0000:08:00.0
    [    5.369645] hub 4-0:1.0: USB hub found
    [    5.369866] xhci_hcd 0000:0a:00.3: new USB bus registered, assigned bus number 5
    [    5.370071] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
    [    5.370073] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    5.370074] usb usb5: Product: xHCI Host Controller
    [    5.370075] usb usb5: Manufacturer: Linux 5.0.9-1-default xhci-hcd
    [    5.370075] usb usb5: SerialNumber: 0000:0a:00.3
    [    5.370150] hub 5-0:1.0: USB hub found
    [    5.370320] xhci_hcd 0000:0a:00.3: new USB bus registered, assigned bus number 6
    [    5.370322] xhci_hcd 0000:0a:00.3: Host supports USB 3.0  SuperSpeed
    [    5.370332] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
    [    5.370349] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
    [    5.370350] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    5.370350] usb usb6: Product: xHCI Host Controller
    [    5.370351] usb usb6: Manufacturer: Linux 5.0.9-1-default xhci-hcd
    [    5.370352] usb usb6: SerialNumber: 0000:0a:00.3
    [    5.370424] hub 6-0:1.0: USB hub found
    [    5.704146] usb 5-1: new high-speed USB device number 2 using xhci_hcd
    [    5.712143] usb 1-4: new full-speed USB device number 2 using xhci_hcd
    [    5.854962] usb 5-1: New USB device found, idVendor=03f0, idProduct=cd11, bcdDevice= 1.00
    [    5.854964] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    5.854965] usb 5-1: Product: Officejet 5740 series
    [    5.854965] usb 5-1: Manufacturer: HP
    [    5.854966] usb 5-1: SerialNumber: TH6885X0WW068D
    [    5.870051] usb-storage 5-1:1.2: USB Mass Storage device detected
    [    5.870250] scsi host10: usb-storage 5-1:1.2
    [    5.870329] usbcore: registered new interface driver usb-storage
    [    5.871109] usbcore: registered new interface driver uas
    [    6.120640] usb 1-4: New USB device found, idVendor=046d, idProduct=c52e, bcdDevice=23.01
    [    6.120643] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [    6.120644] usb 1-4: Product: USB Receiver
    [    6.120645] usb 1-4: Manufacturer: Logitech
    [    6.174751] usbcore: registered new interface driver usbhid
    [    6.174752] usbhid: USB HID core driver
    [    6.176423] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-4/1-4:1.0/0003:046D:C52E.0001/input/input0
    [    6.236337] hid-generic 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:01:00.0-4/input0
    [    6.236611] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-4/1-4:1.1/0003:046D:C52E.0002/input/input1
    [    6.236679] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-4/1-4:1.1/0003:046D:C52E.0002/input/input2
    [    6.296121] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-4/1-4:1.1/0003:046D:C52E.0002/input/input3
    [    6.296214] hid-generic 0003:046D:C52E.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:01:00.0-4/input1
    [    6.332025] usb 1-9: new high-speed USB device number 3 using xhci_hcd
    [    6.568890] usb 1-9: New USB device found, idVendor=13fd, idProduct=1040, bcdDevice= 1.06
    [    6.568892] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    6.568893] usb 1-9: Product: DVDRAM GMA-4082N
    [    6.568894] usb 1-9: Manufacturer: Initio
    [    6.568895] usb 1-9: SerialNumber: 0000000000000000W
    [    6.577900] usb-storage 1-9:1.0: USB Mass Storage device detected
    [    6.578026] scsi host11: usb-storage 1-9:1.0
    [    7.235158] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0xCD11
    [    7.236538] usblp 5-1:1.3: usblp1: USB Bidirectional printer dev 2 if 3 alt 0 proto 2 vid 0x03F0 pid 0xCD11
    [    7.236565] usbcore: registered new interface driver usblp
    [   13.120448] usblp0: removed
    [   13.123402] usblp 5-1:1.1: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0xCD11
    [   13.123479] usblp1: removed
    [   13.126788] usblp 5-1:1.3: usblp1: USB Bidirectional printer dev 2 if 3 alt 0 proto 2 vid 0x03F0 pid 0xCD11
    de melding die ik krijg als ik VLC vanuit een terminal opstart is:
    Code:
    [000055886c37d550] main audio output error: too low audio sample frequency (0)
    [00007f98b41c07c0] main decoder error: failed to create audio output
    [000055886c37d550] vlcpulse audio output error: digital pass-through stream connection failure: Niet ondersteund
    [000055886c37d550] main audio output error: module not functional
    [00007f98b41c07c0] main decoder error: failed to create audio output
    [00007f98b40497c0] avcodec decoder: Using NVIDIA VDPAU Driver Shared Library  418.56  Fri Mar 15 12:31:51 CDT 2019 for hardware decoding
    Ik hoop dat ik genoeg info heb gegeven.
    Het is geen ramp, gebruik dat ding bijna nooit, maar nu wil ik toch wel graag weten waarom het niet werkt op mijn systeem.

  2. #2
    Join Date
    Jun 2008
    Location
    Groningen, Netherlands
    Posts
    19,587
    Blog Entries
    14

    Default Re: externe DVD werkt niet goed

    Is libdvdcss2 geïnstalleerd?
    ° Appreciate my reply? Click the star and let me know why.

    ° Perfection is not gonna happen. No way.

    https://en.opensuse.org/openSUSE:Board#Members
    http://en.opensuse.org/User:Knurpht
    http://nl.opensuse.org/Gebruiker:Knurpht

  3. #3

    Default Re: externe DVD werkt niet goed

    Quote Originally Posted by Knurpht View Post
    Is libdvdcss2 geïnstalleerd?
    Ja, die is geïnstalleerd.
    Ik heb ook verschillende USB-poorten geprobeerd.
    2.0 en 3.1.
    maar maakt allemaal geen verschil.

  4. #4
    Join Date
    Oct 2014
    Location
    Rotterdam
    Posts
    147

    Default Re: externe DVD werkt niet goed

    Ja, prima bug report.

    Mijn eerste gok zou zijn dat op één of andere manier de NVIDIA VDPAU Driver Shared Library problemen veroorzaakt.

    Hier, https://wiki.videolan.org/VLC_GPU_Decoding/, lees ik dat het standaard uit staat, maar dat lijkt bij jou niet het geval, kan je dat eens nakijken en wat spelen met de keuzes.

  5. #5

    Default Re: externe DVD werkt niet goed

    Bedankt voor de info.

    Alle video formaten speelt vlc goed af.
    Maar zelf als ik een VOB bestand naar de HDD kopieer dan is de kwaliteit van die video heel belabberd.
    Heeft dus niets te maken met de DVD-drive

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •