Results 1 to 7 of 7

Thread: qla2xxx boken

  1. #1

    Default qla2xxx boken

    I am trying to setup multipath on openSUSE 42.3 on a HP ProLiant DL380 G4. Unfortunately the
    fibre channel driver qla2xxx does not work anymore. On openSUSE 42.2 it worked fine.

    lspci:
    00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 0c)
    00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A (rev 0c)
    00:06.0 PCI bridge: Intel Corporation E7520 PCI Express Port C (rev 0c)
    00:1d.0 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
    00:1d.1 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
    00:1d.2 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)
    00:1d.3 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)
    00:1d.7 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
    00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
    00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
    01:03.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Rage XL PCI (rev 27)
    01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 01)
    01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out Processor (rev 01)
    02:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 09)
    02:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 09)
    03:01.0 Ethernet controller: Broadcom Limited NetXtreme BCM5704 Gigabit Ethernet (rev 10)
    03:01.1 Ethernet controller: Broadcom Limited NetXtreme BCM5704 Gigabit Ethernet (rev 10)
    04:03.0 RAID bus controller: Compaq Computer Corporation Smart Array 64xx (rev 01)
    05:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 09)
    05:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 09)
    06:01.0 Fibre Channel: QLogic Corp. QLA2300 64-bit Fibre Channel Adapter (rev 01)
    06:02.0 Fibre Channel: QLogic Corp. QLA2300 64-bit Fibre Channel Adapter (rev 01)

    dmesg:
    ...
    [ 3.725086] usbcore: registered new interface driver usbfs
    [ 3.725124] usbcore: registered new interface driver hub
    [ 3.725187] usbcore: registered new device driver usb
    [ 3.725532] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.00.00.06-k.
    [ 3.726305] qla2xxx 0000:06:01.0: PCI IRQ 74 -> rerouted to legacy IRQ 18
    [ 3.726381] qla2xxx [0000:06:01.0]-001d: : Found an ISP2300 irq 18 iobase 0xffffc90000e4a000.
    [ 3.726890] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 3.727088] qla2xxx [0000:06:01.0]-0050:0: No matching ROM signature.
    [ 3.727841] uhci_hcd: USB Universal Host Controller Interface driver
    [ 3.728279] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 3.728305] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    [ 3.728323] uhci_hcd 0000:00:1d.0: detected 2 ports
    [ 3.728379] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006000
    ...
    [ 3.937659] ata_piix 0000:00:1f.1: version 2.13
    [ 3.937679] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
    [ 3.937868] ata_piix 0000:00:1f.1: can't derive routing for PCI INT A
    [ 3.954563] scsi host2: ata_piix
    [ 3.955057] scsi host3: ata_piix
    [ 3.955250] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14
    [ 3.955253] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15
    [ 3.985520] clocksource: Switched to clocksource tsc
    [ 3.996062] blk_update_request: I/O error, dev fd0, sector 0
    [ 3.996068] floppy: error -5 while reading block 0
    [ 4.067540] scsi host0: qla2xxx
    [ 4.124294] ata1.00: ATAPI: DV-28E-N, C.6B, max UDMA/33
    [ 4.144194] ata1.00: configured for UDMA/33
    [ 4.156497] PM: Starting manual resume from disk
    [ 4.156512] PM: Hibernation image partition 104:1 present
    [ 4.156513] PM: Looking for hibernation image.
    [ 4.157139] PM: Image not found (code -22)
    [ 4.157146] PM: Hibernation image not present or could not be loaded.
    [ 4.244038] raid6: sse2x1 gen() 2421 MB/s
    [ 4.312018] raid6: sse2x1 xor() 1949 MB/s
    [ 4.380025] raid6: sse2x2 gen() 3741 MB/s
    [ 4.448019] raid6: sse2x2 xor() 2201 MB/s
    [ 4.516011] raid6: sse2x4 gen() 3581 MB/s
    [ 4.584021] raid6: sse2x4 xor() 2173 MB/s
    [ 4.584028] raid6: using algorithm sse2x2 gen() 3741 MB/s
    [ 4.584032] raid6: .... xor() 2201 MB/s, rmw enabled
    [ 4.584035] raid6: using intx1 recovery algorithm
    [ 4.584581] xor: measuring software checksum speed
    [ 4.624009] prefetch64-sse: 6331.000 MB/sec
    [ 4.664010] generic_sse: 6345.000 MB/sec
    [ 4.664014] xor: using function: generic_sse (6345.000 MB/sec)
    [ 4.674672] Btrfs loaded, crc32c=crc32c-generic, assert=on
    [ 4.675361] BTRFS: device fsid 8b20f8ff-d600-4519-9a85-610f2cae14a1 devid 1 transid 1321 /dev/cciss/c0d0p2
    [ 4.838094] BTRFS info (device cciss/c0d0p2): disk space caching is enabled
    [ 4.838102] BTRFS info (device cciss/c0d0p2): has skinny extents
    [ 9.072049] qla2xxx [0000:06:01.0]-00fb:0: QLogic QLA2310 - .
    [ 9.072065] qla2xxx [0000:06:01.0]-00fc:0: ISP2300: PCI (66 MHz) @ 0000:06:01.0 hdma+ host#=0 fw=3.03.28 IPX.
    [ 9.072275] qla2xxx 0000:06:02.0: PCI IRQ 78 -> rerouted to legacy IRQ 18
    [ 9.072316] qla2xxx [0000:06:02.0]-001d: : Found an ISP2300 irq 18 iobase 0xffffc90000e60000.
    [ 9.072801] qla2xxx [0000:06:02.0]-0050:4: No matching ROM signature.
    [ 9.320110] scsi host4: qla2xxx
    [ 10.104231] random: nonblocking pool is initialized
    [ 10.758338] qla2xxx [0000:06:02.0]-500a:4: LOOP UP detected (2 Gbps).
    [ 10.888037] qla2xxx [0000:06:02.0]-00fb:4: QLogic QLA2310 - .
    [ 10.888047] qla2xxx [0000:06:02.0]-00fc:4: ISP2300: PCI (66 MHz) @ 0000:06:02.0 hdma+ host#=4 fw=3.03.28 IPX.
    [ 10.892055] scsi 2:0:0:0: CD-ROM TEAC DV-28E-N C.6B PQ: 0 ANSI: 5
    [ 10.901631] scsi 2:0:0:0: Attached scsi generic sg0 type 5
    [ 11.006178] systemd-journald[114]: Received SIGTERM from PID 1 (systemd).
    [ 11.131262] systemd: 20 output lines suppressed due to ratelimiting
    [ 13.208785] BTRFS info (device cciss/c0d0p2): disk space caching is enabled
    [ 13.828466] audit: type=1400 audit(1535707951.254:2): apparmor="STATUS" operation="profile_load" name="/{usr/,}bin/ping" pid=493 comm="apparmor_parser"
    [ 13.949959] audit: type=1400 audit(1535707951.374:3): apparmor="STATUS" operation="profile_load" name="klogd" pid=500 comm="apparmor_parser"
    [ 14.068973] audit: type=1400 audit(1535707951.494:4): apparmor="STATUS" operation="profile_load" name="syslog-ng" pid=504 comm="apparmor_parser"
    [ 14.191496] audit: type=1400 audit(1535707951.614:5): apparmor="STATUS" operation="profile_load" name="syslogd" pid=508 comm="apparmor_parser"
    [ 14.225758] audit: type=1400 audit(1535707951.650:6): apparmor="STATUS" operation="profile_load" name="/usr/bin/lessopen.sh" pid=513 comm="apparmor_parser"
    [ 14.337077] audit: type=1400 audit(1535707951.762:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2" pid=526 comm="apparmor_parser"
    [ 14.337097] audit: type=1400 audit(1535707951.762:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//DEFAULT_URI" pid=526 comm="apparmor_parser"
    [ 14.337107] audit: type=1400 audit(1535707951.762:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//HANDLING_UNTRUSTED_INPUT" pid=526 comm="apparmor_parser"
    [ 14.337117] audit: type=1400 audit(1535707951.762:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/apache2/mpm-prefork/apache2//phpsysinfo" pid=526 comm="apparmor_parser"
    [ 14.375149] input: PC Speaker as /devices/platform/pcspkr/input/input3
    [ 14.377151] blk_update_request: I/O error, dev fd0, sector 0
    [ 14.377156] floppy: error -5 while reading block 0
    [ 14.407040] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 14.415976] intel_rng: FWH not detected
    [ 14.421324] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 14.421595] thermal LNXTHERM:00: registered as thermal_zone0
    [ 14.421604] ACPI: Power Button [PWRF]
    [ 14.421607] ACPI: Thermal Zone [THM0] (8 C)
    [ 14.435070] EDAC MC: Ver: 3.0.0
    [ 14.440094] Contact your BIOS vendor to see if the E752x error registers can be safely un-hidden
    [ 14.473281] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
    [ 14.473296] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 14.473739] sr 2:0:0:0: Attached scsi CD-ROM sr0
    [ 14.491590] audit: type=1400 audit(1535707951.914:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/dovecot/anvil" pid=567 comm="apparmor_parser"
    [ 14.569731] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
    [ 14.683404] hpwdt 0000:01:04.0: This server does not have an iLO2+ ASIC.
    [ 14.724165] pps_core: LinuxPPS API ver. 1 registered
    [ 14.724173] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    [ 14.725970] PTP clock support registered
    [ 14.845989] tg3.c:v3.137 (May 11, 2014)
    [ 14.846258] tg3 0000:03:01.0: PCI IRQ 25 -> rerouted to legacy IRQ 17
    [ 14.884925] tg3 0000:03:01.0 eth0: Tigon3 [partno(N/A) rev 2100] (PCIX:133MHz:64-bit) MAC address 00:17:a4:f4:fb:23
    [ 14.884935] tg3 0000:03:01.0 eth0: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
    [ 14.884940] tg3 0000:03:01.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[0]
    [ 14.884944] tg3 0000:03:01.0 eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
    [ 14.885226] tg3 0000:03:01.1: PCI IRQ 26 -> rerouted to legacy IRQ 18
    [ 14.922907] tg3 0000:03:01.1 eth1: Tigon3 [partno(N/A) rev 2100] (PCIX:133MHz:64-bit) MAC address 00:17:a4:f4:fb:22
    [ 14.922920] tg3 0000:03:01.1 eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
    [ 14.922925] tg3 0000:03:01.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
    [ 14.922929] tg3 0000:03:01.1 eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
    [ 14.946445] iTCO_vendor_support: vendor-support=0
    [ 14.947552] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 14.947605] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
    [ 15.210686] Adding 2103292k swap on /dev/cciss/c0d0p1. Priority:-1 extents:1 across:2103292k FS
    [ 15.397527] systemd-journald[408]: Received request to flush runtime journal from PID 1
    [ 19.074238] qla2xxx [0000:06:01.0]-500a:0: LOOP UP detected (2 Gbps).
    [ 19.638197] qla2xxx [0000:06:01.0]-5046:0: Async-gnlist failed - hdl=12 portid=010000 status=30 mb0=4006 mb1=4000 mb2=0 mb6=0 mb7=0.
    [ 19.639489] qla2xxx [0000:06:01.0]-5046:0: Async-gpdb failed - hdl=14 portid=010000 status=30 mb0=4006 mb1=0 mb2=0 mb6=0 mb7=0.
    [ 19.639572] qla2xxx [0000:06:01.0]-5046:0: Async-gnlist failed - hdl=15 portid=010000 status=30 mb0=4006 mb1=4000 mb2=0 mb6=0 mb7=0.
    [ 19.639723] qla2xxx [0000:06:01.0]-5046:0: Async-gpdb failed - hdl=17 portid=010000 status=30 mb0=4006 mb1=0 mb2=0 mb6=0 mb7=0.
    [ 21.064087] qla2xxx [0000:06:01.0]-5046:0: Async-gnlist failed - hdl=18 portid=010000 status=30 mb0=4006 mb1=4000 mb2=0 mb6=0 mb7=0.
    [ 21.064268] qla2xxx [0000:06:01.0]-5046:0: Async-gpdb failed - hdl=1a portid=010000 status=30 mb0=4006 mb1=0 mb2=0 mb6=0 mb7=0.
    ...

  2. #2

    Default Re: qla2xxx boken

    Is there anyone in the forum, who can help me, or should I make a bug report?

  3. #3
    Join Date
    Jun 2008
    Location
    Groningen, Netherlands
    Posts
    19,585
    Blog Entries
    14

    Default Re: qla2xxx boken

    Quote Originally Posted by amadrits View Post
    Is there anyone in the forum, who can help me, or should I make a bug report?
    I had noticed your post before, but don't have the knowledge re. this subject. If you think it's a bug, then indeed file a bug report at bugzilla.opensuse.org
    ° Appreciate my reply? Click the star and let me know why.

    ° Perfection is not gonna happen. No way.

    https://en.opensuse.org/openSUSE:Board#Members
    http://en.opensuse.org/User:Knurpht
    http://nl.opensuse.org/Gebruiker:Knurpht

  4. #4

    Default Re: qla2xxx boken

    I made a bug report (1121319) but nothing happens.
    Can I expect to have access to my data again sometimes or do I have to scrap my whole cluster?

    Any hints on how I can fix this my self?

  5. #5
    Join Date
    Jul 2008
    Location
    Seattle, WA
    Posts
    17,037

    Default Re: qla2xxx boken

    I might increase the severity and see if you can get a response on it -
    if it's a software bug, you'll need a developer to fix it.

    You might also post on the openSUSE development mailing list.

    Jim

    --
    Jim Henderson
    openSUSE Forums Administrator
    Forum Use Terms & Conditions at http://tinyurl.com/openSUSE-T-C

  6. #6

    Default Re: qla2xxx boken

    Quote Originally Posted by hendersj View Post
    You might also post on the openSUSE development mailing list.
    Where do I find the development mailing list?

  7. #7
    Join Date
    Aug 2010
    Location
    Chicago suburbs
    Posts
    12,178
    Blog Entries
    3

    Default Re: qla2xxx boken

    Quote Originally Posted by amadrits View Post
    Where do I find the development mailing list?
    Maybe check here: https://lists.opensuse.org/
    openSUSE Leap 15.1; KDE Plasma 5;

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •