I installed FreeCAD from OSS repository. When switching to Draft workbench, I can not see a grid. I tried to disable/enable grid from toolbar but pressing this button doesn't trigger any action.

Any advice?

I'm attaching log:
Code:
Msg: FreeCAD 0.17, Libs: 0.17RUnknown
© Juergen Riegel, Werner Mayer, Yorik van Havre 2001-2018
  #####                 ####  ###   ####  
  #                    #      # #   #   # 
  #     ##  #### ####  #     #   #  #   # 
  ####  # # #  # #  #  #     #####  #   # 
  #     #   #### ####  #    #     # #   # 
  #     #   #    #     #    #     # #   #  ##  ##  ##
  #     #   #### ####   ### #     # ####   ##  ##  ##


Log: Time = Fri Feb 15 21:25:12 2019
Log: AppDataSkipVendor = true
Log: AppHomePath = /usr/lib64/FreeCAD/
Log: AppIcon = freecad
Log: AppTempPath = /tmp/
Log: BinPath = /usr/lib64/FreeCAD/bin/
Log: BuildRepositoryURL = Unknown
Log: BuildRevision = Unknown
Log: BuildRevisionDate = Unknown
Log: BuildVersionMajor = 0
Log: BuildVersionMinor = 17
Log: Console = 0
Log: CopyrightInfo = © Juergen Riegel, Werner Mayer, Yorik van Havre 2001-2018
  #####                 ####  ###   ####  
  #                    #      # #   #   # 
  #     ##  #### ####  #     #   #  #   # 
  ####  # # #  # #  #  #     #####  #   # 
  #     #   #### ####  #    #     # #   # 
  #     #   #    #     #    #     # #   #  ##  ##  ##
  #     #   #### ####   ### #     # ####   ##  ##  ##




Log: Debug = 0
Log: DocPath = /usr/lib64/FreeCAD/doc/
Log: ExeName = FreeCAD
Log: ExeVendor = FreeCAD
Log: ExeVersion = 0.17
Log: LoggingFile = 1
Log: LoggingFileName = freecad-log.txt
Log: MaintainerUrl = http://www.freecadweb.org/wiki/Main_Page
Log: PATH = /home/fisiu/.npm-packages/bin:/home/fisiu/.sdkman/candidates/maven/current/bin:/home/fisiu/bin:/usr/local/bin:/usr/bin:/bin:/home/fisiu/.dotnet/tools:/usr/lib/mit/sbin:/home/fisiu/.composer/vendor/bin:/opt/java/maven/latest/bin:/opt/java/gradle/latest/bin:/opt/java/ant/latest/bin:/opt/java/tomcat/latest/bin:/opt/java/db-derby/latest/bin:/opt/android/sdk/platform-tools:/home/fisiu/.rvm/bin:/home/fisiu/go/bin:/opt/postman:/opt/flutter/bin:/home/fisiu/.rvm/bin
Log: PYTHONPATH = 
Log: PythonSearchPath = /usr/bin/../lib/python36.zip:/usr/bin/../lib64/python3.6:/usr/bin/../lib64/python3.6:/usr/bin/../lib64/python3.6/lib-dynload
Log: RunMode = Gui
Log: SingleInstance = 1
Log: SplashAlignment = Bottom|Left
Log: SplashInfoColor = #c8c8c8
Log: SplashScreen = freecadsplash
Log: SplashTextColor = #ffffff
Log: StartWorkbench = StartWorkbench
Log: SystemParameter = /home/fisiu/.FreeCAD/system.cfg
Log: UserAppData = /home/fisiu/.FreeCAD/
Log: UserHomePath = /home/fisiu
Log: UserParameter = /home/fisiu/.FreeCAD/user.cfg
Log: Verbose = 
Log: Create Application
Log: Run App init script
Log: Init: starting App::FreeCADInit.py
Log: Init:   Searching for modules...
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Plot(Init.py not found)... ignore
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Ship(Init.py not found)... ignore
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/ReverseEngineering... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/PartDesign... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Path... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Draft... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Test... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Complete... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Tux(Init.py not found)... ignore
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Material... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/OpenSCAD... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Import... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Web... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Measure... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Inspection... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Spreadsheet... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Surface... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Points... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Image... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Raytracing... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/TechDraw... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Idf... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Part... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Robot... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Arch... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Sketcher... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Start... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/AddonManager... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Mesh... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Show(Init.py not found)... ignore
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Drawing... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/MeshPart... done
Log: Using /usr/lib64/FreeCAD/Mod as module path!
Log: System path after init:
Log:    /usr/lib64/FreeCAD/bin
Log:    /usr/lib64/FreeCAD/Mod/Plot
Log:    /usr/lib64/FreeCAD/Mod/Ship
Log:    /usr/lib64/FreeCAD/Mod/ReverseEngineering
Log:    /usr/lib64/FreeCAD/Mod/PartDesign
Log:    /usr/lib64/FreeCAD/Mod/Path
Log:    /usr/lib64/FreeCAD/Mod/Draft
Log:    /usr/lib64/FreeCAD/Mod/Test
Log:    /usr/lib64/FreeCAD/Mod/Complete
Log:    /usr/lib64/FreeCAD/Mod/Tux
Log:    /usr/lib64/FreeCAD/Mod/Material
Log:    /usr/lib64/FreeCAD/Mod/OpenSCAD
Log:    /usr/lib64/FreeCAD/Mod/Import
Log:    /usr/lib64/FreeCAD/Mod/Web
Log:    /usr/lib64/FreeCAD/Mod/Measure
Log:    /usr/lib64/FreeCAD/Mod/Inspection
Log:    /usr/lib64/FreeCAD/Mod/Spreadsheet
Log:    /usr/lib64/FreeCAD/Mod/Surface
Log:    /usr/lib64/FreeCAD/Mod/Points
Log:    /usr/lib64/FreeCAD/Mod/Image
Log:    /usr/lib64/FreeCAD/Mod/Raytracing
Log:    /usr/lib64/FreeCAD/Mod/TechDraw
Log:    /usr/lib64/FreeCAD/Mod/Idf
Log:    /usr/lib64/FreeCAD/Mod/Part
Log:    /usr/lib64/FreeCAD/Mod/Robot
Log:    /usr/lib64/FreeCAD/Mod/Arch
Log:    /usr/lib64/FreeCAD/Mod/Sketcher
Log:    /usr/lib64/FreeCAD/Mod/Start
Log:    /usr/lib64/FreeCAD/Mod/AddonManager
Log:    /usr/lib64/FreeCAD/Mod/Mesh
Log:    /usr/lib64/FreeCAD/Mod/Show
Log:    /usr/lib64/FreeCAD/Mod/Drawing
Log:    /usr/lib64/FreeCAD/Mod/MeshPart
Log:    /home/fisiu/.npm-packages/bin
Log:    /home/fisiu/.sdkman/candidates/maven/current/bin
Log:    /home/fisiu/bin
Log:    /usr/local/bin
Log:    /usr/bin
Log:    /bin
Log:    /home/fisiu/.dotnet/tools
Log:    /usr/lib/mit/sbin
Log:    /home/fisiu/.composer/vendor/bin
Log:    /opt/java/maven/latest/bin
Log:    /opt/java/gradle/latest/bin
Log:    /opt/java/ant/latest/bin
Log:    /opt/java/tomcat/latest/bin
Log:    /opt/java/db-derby/latest/bin
Log:    /opt/android/sdk/platform-tools
Log:    /home/fisiu/.rvm/bin
Log:    /home/fisiu/go/bin
Log:    /opt/postman
Log:    /opt/flutter/bin
Log:    /home/fisiu/.rvm/bin
Log: Init: App::FreeCADInit.py done
Log: Init: Creating Gui::Application and QApplication
Log: Local server 'FreeCAD' started
Log: OpenGL version is: 4.6 (4.6.0 NVIDIA 410.93)
Log: Run Gui init script
Log: Init: Running FreeCADGuiInit.py start script...
Log: Init:   Searching modules...
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Plot... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Ship... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/ReverseEngineering... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/PartDesign... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Path... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Draft... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Test... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Complete... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Tux... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Material... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/OpenSCAD... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Import... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Web... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Measure(InitGui.py not found)... ignore
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Inspection... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Spreadsheet... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Surface... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Points... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Image... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Raytracing... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/TechDraw... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Idf(InitGui.py not found)... ignore
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Part... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Robot... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Arch... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Sketcher... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Start... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/AddonManager... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Mesh... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Show(InitGui.py not found)... ignore
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/Drawing... done
Log: Init:      Initializing /usr/lib64/FreeCAD/Mod/MeshPart... done
Log: Init: Loading FreeCAD GUI
Log: Init: Running FreeCADGuiInit.py start script... done
Log: Init: Activating default workbench StartWorkbench
Log: Loading GUI of Web module... done
Log: Loading GUI of Start module... done
Log: Loading Start module... done
Log: libpng warning: iCCP: known incorrect sRGB profile
Log: libpng warning: iCCP: known incorrect sRGB profile
Log: Init: Showing main window
Log: Main window restored
Log: Show main window
Log: Toolbars restored
Log: Init: Entering event loop
Log: Init: Processing command line files
Log: Module: Part
Log: Loading Part module... done
Log: Loading GUI of Part module... done
Log: Qt WebEngine seems to be initialized from a plugin. Please set Qt::AA_ShareOpenGLContexts using QCoreApplication::setAttribute before constructing QGuiApplication.
Log: Loading Draft module...done
Log: Loading Sketcher module... done
Log: Loading GUI of Sketcher module... done
Log: Draft workbench activated
Log: Hide main window
Log: Finish: Event loop left
Log: Destruct Gui::Application
Log: FreeCAD terminating...
Log: Saving system parameter...
Log: Saving system parameter...done
Log: Saving user parameter...
Log: Saving user parameter...done