Leap 15, the Vista version of Opensuse ?

**Asimov** · 05-Feb-2019, 20:17

Originally Posted by enziosavio

Have you checked that in Yast> boot loader> Boot loader options> have it checked out> detects other OS?
Usually if the mouse is slow there is a graphic problem> what features does your computer have> graphics card?

When I was updating from version to version I always deleted the configuration files, before doing it ...., try to create a new user and enter with that if you see that it is better you can proceed to delete the configuration files that are between the files hidden, if it is the same you have to investigate the video card drivers.

I forget to add yast and yast2 to the list of thing not working ( another post). But the one was my fault. I did remove by accident Ruby. I was thinking that a had just to used zypper install yast* to fix the problem. But yast and yast2 do not work. A dependence is missing.

**Asimov** · 05-Feb-2019, 20:30

Originally Posted by nrickert

Do you have a system EFI partition? Check the output from

Code:

parted -l

Do you have a partition mounted at "/boot/efi"?

Code:

Numéro  Début   Fin     Taille  Système de fichiers  Nom                           Fanions 1      1049kB  106MB   105MB   fat32                EFI system partition          démarrage, esp
 2      106MB   240MB   134MB                        Microsoft reserved partition  msftres
 3      240MB   2454MB  2214MB  linux-swap(v1)                                     partition d'échange (swap)
 6      2454MB  12,5GB  10,0GB  linux-swap(v1)                                     partition d'échange (swap)
 7      12,5GB  22,5GB  10,0GB  ext4
 9      32,5GB  52,5GB  20,0GB  ext3
10      52,5GB  594GB   542GB   ext4
11      594GB   1094GB  500GB   btrfs
 4      1094GB  2143GB  1049GB  ntfs                 Basic data partition          msftdata
 5      2143GB  3001GB  858GB   ntfs                 Basic data partition          msftdata




Modèle: ATA WDC WDS100T1B0A- (scsi)
Disque /dev/sdc : 1000GB
Taille des secteurs (logiques/physiques): 512B/512B
Table de partitions : msdos
Disk Flags: 


Numéro  Début   Fin     Taille  Type     Système de fichiers  Fanions
 1      1049kB  33,8GB  33,8GB  primary  btrfs                démarrage, type=83
 2      33,8GB  463GB   429GB   primary  btrfs                type=83
 3      463GB   989GB   526GB   primary  ext4                 type=83




Modèle: SanDisk Cruzer Glide (scsi)
Disque /dev/sdd : 31,3GB
Taille des secteurs (logiques/physiques): 512B/512B
Table de partitions : msdos
Disk Flags: 


Numéro  Début   Fin     Taille  Type     Système de fichiers  Fanions
 1      16,4kB  31,3GB  31,3GB  primary  fat32                lba, type=0c

It's not obvious. Because under 42.3, i had 2 boots. I was choosing the OS with the Bios menu. I think it the part 9 because i do not see another reason to used an ext3 part.

**nrickert** · 05-Feb-2019, 21:03

Based on that, you do not appear to have an EFI partition. And in that case there probably won't be anything mounted at "/boot/efi".

I was asking, because that could be a possible reason for not being able to boot Windows. But clearly, that is not the problem.

As the root user, can you run:

Code:

grub2-mkconfig -o /boot/grub2/grub.cfg

and see if that adds a Windows boot entry to your boot menu.

**mrmazda** · 05-Feb-2019, 22:27

Without seeing the 15.0 /etc/fstab, seeing all those Linux native partitions suggests 42.3 might still be installed, but somehow missed in the 15.0 Grub menu. How did you make your move from 42.3 to 15.0? Online upgrade? Offline upgrade? Fresh installation? Reuse old partitions?

nrickert, his paste of parted output got partially misaligned. He has first partition ESP FAT32.

**nrickert** · 05-Feb-2019, 22:43

Originally Posted by mrmazda

nrickert, his paste of parted output got partially misaligned. He has first partition ESP FAT32.

Yes, you are right. And I missed that.

It leaves open the possibility that Windows is using UEFI booting while Leap 15.0 is using MBR booting. That would explain the problem with Windows.

**mrmazda** · 05-Feb-2019, 23:21

Asimov, please /usr/bin/susepaste the output from bootinfoscript. (It's an information gathering and formatting script.)

**Operius** · 06-Feb-2019, 08:12

Originally Posted by Asimov

Now my last update has erased windows from my Grub. That the kind of thing that you must expect under Tumbleweed. But not Leap.

What is the fix for Grub ?

OrsoBruno wrote in this thread (https://forums.opensuse.org/showthread.php/534851-Multiple-boot-options-lost-after-update):
"Check in YaST-Bootloader, BootLoader Options tab, that the "Probe Foreign OS" box is checked and possibly toggle it twice and save to regenerate the boot configuration."

That fixed the grub issue for me.

Operius.

**Asimov** · 06-Feb-2019, 12:12

Originally Posted by nrickert

Based on that, you do not appear to have an EFI partition. And in that case there probably won't be anything mounted at "/boot/efi".

I was asking, because that could be a possible reason for not being able to boot Windows. But clearly, that is not the problem.

As the root user, can you run:

Code:

grub2-mkconfig -o /boot/grub2/grub.cfg

and see if that adds a Windows boot entry to your boot menu.

Code:

# grub2-mkconfig -o /boot/grub2/grub.cfgCréation du fichier de configuration GRUB…
Thème trouvé : /boot/grub2/themes/openSUSE/theme.txt
Image Linux trouvée : /boot/vmlinuz-4.12.14-lp150.12.45-default
Image mémoire initiale trouvée : /boot/initrd-4.12.14-lp150.12.45-default
Image Linux trouvée : /boot/vmlinuz-4.12.14-lp150.12.28-default
Image mémoire initiale trouvée : /boot/initrd-4.12.14-lp150.12.28-default
Image Linux trouvée : /boot/vmlinuz-4.12.14-lp150.12.25-default
Image mémoire initiale trouvée : /boot/initrd-4.12.14-lp150.12.25-default
Image Linux trouvée : /boot/vmlinuz-4.4.159-73-default
Image mémoire initiale trouvée : /boot/initrd-4.4.159-73-default
Image Linux trouvée : /boot/vmlinuz-4.4.155-68-default
Image mémoire initiale trouvée : /boot/initrd-4.4.155-68-default
Image Linux trouvée : /boot/vmlinuz-4.4.143-65-default
Image mémoire initiale trouvée : /boot/initrd-4.4.143-65-default
Image Linux trouvée : /boot/vmlinuz-4.4.140-62-default
Image mémoire initiale trouvée : /boot/initrd-4.4.140-62-default
Image Linux trouvée : /boot/vmlinuz-4.4.138-59-default
Image mémoire initiale trouvée : /boot/initrd-4.4.138-59-default
Image Linux trouvée : /boot/vmlinuz-4.4.132-53-default
Image mémoire initiale trouvée : /boot/initrd-4.4.132-53-default
Image Linux trouvée : /boot/vmlinuz-4.4.126-48-default
Image mémoire initiale trouvée : /boot/initrd-4.4.126-48-default
Image Linux trouvée : /boot/vmlinuz-4.4.120-45-default
Image mémoire initiale trouvée : /boot/initrd-4.4.120-45-default
Image Linux trouvée : /boot/vmlinuz-4.4.114-42-default
Image mémoire initiale trouvée : /boot/initrd-4.4.114-42-default
Image Linux trouvée : /boot/vmlinuz-4.4.104-18.44-default
Image mémoire initiale trouvée : /boot/initrd-4.4.104-18.44-default
Image Linux trouvée : /boot/vmlinuz-4.12.14-lp150.12.45-default
Image mémoire initiale trouvée : /boot/initrd-4.12.14-lp150.12.45-default
Image Linux trouvée : /boot/vmlinuz-4.12.14-lp150.12.28-default
Image mémoire initiale trouvée : /boot/initrd-4.12.14-lp150.12.28-default
Image Linux trouvée : /boot/vmlinuz-4.12.14-lp150.12.25-default
Image mémoire initiale trouvée : /boot/initrd-4.12.14-lp150.12.25-default
Image Linux trouvée : /boot/vmlinuz-4.4.159-73-default
Image mémoire initiale trouvée : /boot/initrd-4.4.159-73-default
Image Linux trouvée : /boot/vmlinuz-4.4.155-68-default
Image mémoire initiale trouvée : /boot/initrd-4.4.155-68-default
Image Linux trouvée : /boot/vmlinuz-4.4.143-65-default
Image mémoire initiale trouvée : /boot/initrd-4.4.143-65-default
Image Linux trouvée : /boot/vmlinuz-4.4.140-62-default
Image mémoire initiale trouvée : /boot/initrd-4.4.140-62-default
Image Linux trouvée : /boot/vmlinuz-4.4.138-59-default
Image mémoire initiale trouvée : /boot/initrd-4.4.138-59-default
Image Linux trouvée : /boot/vmlinuz-4.4.132-53-default
Image mémoire initiale trouvée : /boot/initrd-4.4.132-53-default
Image Linux trouvée : /boot/vmlinuz-4.4.126-48-default
Image mémoire initiale trouvée : /boot/initrd-4.4.126-48-default
Image Linux trouvée : /boot/vmlinuz-4.4.120-45-default
Image mémoire initiale trouvée : /boot/initrd-4.4.120-45-default
Image Linux trouvée : /boot/vmlinuz-4.4.114-42-default
Image mémoire initiale trouvée : /boot/initrd-4.4.114-42-default
Image Linux trouvée : /boot/vmlinuz-4.4.104-18.44-default
Image mémoire initiale trouvée : /boot/initrd-4.4.104-18.44-default
Windows 7 trouvé sur /dev/sda1
fait

**Asimov** · 06-Feb-2019, 12:20

Originally Posted by mrmazda

Without seeing the 15.0 /etc/fstab, seeing all those Linux native partitions suggests 42.3 might still be installed, but somehow missed in the 15.0 Grub menu. How did you make your move from 42.3 to 15.0? Online upgrade? Offline upgrade? Fresh installation? Reuse old partitions?

nrickert, his paste of parted output got partially misaligned. He has first partition ESP FAT32.

When a was closing my computer, i had printing stating 42.3. I did was concerned because everything was working at the time.

i did a download of Leap 15. And i did the installation from a USB stick. With the update menu of the installation "disk".

**Asimov** · 06-Feb-2019, 12:24

Originally Posted by Operius

OrsoBruno wrote in this thread (https://forums.opensuse.org/showthread.php/534851-Multiple-boot-options-lost-after-update):
"Check in YaST-Bootloader, BootLoader Options tab, that the "Probe Foreign OS" box is checked and possibly toggle it twice and save to regenerate the boot configuration."

That fixed the grub issue for me.

Operius.

I think the upgrade on yast, did reset this selection. But my version of yast do not work. I got the main menu (with new features), but not any submenu.