Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: LEAP 15 Yast -> software management stoped working after updates

  1. #1

    Default LEAP 15 Yast -> software management stoped working after updates

    I just installed LEAP 15 and then went through all the updates (rebooting as required).
    I now want to install the DHCP server. I went to software management and selected the 3 dhcp packages and then pressed accept. After about 2 seconds the software management window closes and I'm back at Yast. Nothing happened. Same behavior with any software package I select.
    I didn't experience this in LEAP 14. I hope someone out there can help me.

    Thanks
    Bob

  2. #2
    Join Date
    Aug 2010
    Location
    Chicago suburbs
    Posts
    12,882
    Blog Entries
    3

    Default Re: LEAP 15 Yast -> software management stoped working after updates

    I have not experienced that. Leap 15 has been very reliable for me.

    What's the output from
    Code:
    zypper lr -d
    And please use a CODE box for posting. You can create a CODE box with the "#" icon in the editor box.
    openSUSE Leap 15.1; KDE Plasma 5;
    testing Leap 15.2Alpha

  3. #3

    Default Re: LEAP 15 Yast -> software management stoped working after updates

    I'm happy to introduce you to an experience you've not had. I've not had this either. Earlier versions of Leap have never given me any problems especially with something as simple as installing/configuring a DHCP server. As a matter of fact I've never had to install a DHCP server; it has always been in Yast ready for me to select and configure. 15 is a first for me. On another point I don't know what you mean by a code box. Can you help me understand this?

    Bob

  4. #4
    Join Date
    Aug 2010
    Location
    Chicago suburbs
    Posts
    12,882
    Blog Entries
    3

    Default Re: LEAP 15 Yast -> software management stoped working after updates

    You can use (in the editor)

    (code)
    text you are posting
    (/code)

    except that you must use square brackets rather than parentheses around "code" and "/code".
    openSUSE Leap 15.1; KDE Plasma 5;
    testing Leap 15.2Alpha

  5. #5

    Default Re: LEAP 15 Yast -> software management stoped working after updates

    OK. I'll give it a try. I'll have to go to the Linux box and get the browser working. It'll be a bit.

    Bob

  6. #6

    Default Re: LEAP 15 Yast -> software management stoped working after updates

    Code:
    zypper lr -d
    Repository priorities are without effect. All enabled repositories share the same priority.
    
    #  | Alias                     | Name                                    | Enabled | GPG Check | Refresh | Priority | Type   | URI                                                                      | Service
    ---+---------------------------+-----------------------------------------+---------+-----------+---------+----------+--------+--------------------------------------------------------------------------+--------
     1 | openSUSE-Leap-15.0-1      | openSUSE-Leap-15.0-1                    | No      | ----      | ----    |   99     | rpm-md | cd:///?devices=/dev/disk/by-id/ata-hp_DVD_A_DH16AAL_3D9004012184         |        
     2 | repo-debug                | openSUSE-Leap-15.0-Debug                | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/distribution/leap/15.0/repo/oss/      |        
     3 | repo-debug-non-oss        | openSUSE-Leap-15.0-Debug-Non-Oss        | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/distribution/leap/15.0/repo/non-oss/  |        
     4 | repo-debug-update         | openSUSE-Leap-15.0-Update-Debug         | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/update/leap/15.0/oss/                 |        
     5 | repo-debug-update-non-oss | openSUSE-Leap-15.0-Update-Debug-Non-Oss | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/debug/update/leap/15.0/non-oss/             |        
     6 | repo-non-oss              | openSUSE-Leap-15.0-Non-Oss              | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/distribution/leap/15.0/repo/non-oss/        |        
     7 | repo-oss                  | openSUSE-Leap-15.0-Oss                  | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/distribution/leap/15.0/repo/oss/            |        
     8 | repo-source               | openSUSE-Leap-15.0-Source               | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/source/distribution/leap/15.0/repo/oss/     |        
     9 | repo-source-non-oss       | openSUSE-Leap-15.0-Source-Non-Oss       | No      | ----      | ----    |   99     | NONE   | http://download.opensuse.org/source/distribution/leap/15.0/repo/non-oss/ |        
    10 | repo-update               | openSUSE-Leap-15.0-Update               | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/leap/15.0/oss/                       |        
    11 | repo-update-non-oss       | openSUSE-Leap-15.0-Update-Non-Oss       | Yes     | (r ) Yes  | Yes     |   99     | rpm-md | http://download.opensuse.org/update/leap/15.0/non-oss/

  7. #7
    Join Date
    Mar 2011
    Location
    Sauerland
    Posts
    4,065

    Default AW: LEAP 15 Yast -> software management stoped working after updates

    As root:

    Code:
    zypper in -f dhcp dhcp-client dhcp-server
    If it does not work, post the complete output incl. the input line in Code-Tags.

  8. #8

    Default Re: LEAP 15 Yast -> software management stoped working after updates

    Code:
    RoutFire:~ # zypper in -f dhcp dhcp-client dhcp-server
    Loading repository data...
    Reading installed packages...
    Forcing installation of 'dhcp-4.3.5-lp150.4.1.x86_64' from repository 'openSUSE-Leap-15.0-Oss'.
    Forcing installation of 'dhcp-client-4.3.5-lp150.4.1.x86_64' from repository 'openSUSE-Leap-15.0-Oss'.
    Forcing installation of 'dhcp-server-4.3.5-lp150.4.1.x86_64' from repository 'openSUSE-Leap-15.0-Oss'.
    Resolving package dependencies...
    
    The following NEW package is going to be installed:
      dhcp-server
    
    The following 2 packages are going to be reinstalled:
      dhcp dhcp-client
    
    1 new package to install, 2 to reinstall.
    Overall download size: 2.4 MiB. Already cached: 0 B. After the operation, additional 2.3 MiB will be used.
    Continue? [y/n/...? shows all options] (y): y
    Retrieving package dhcp-4.3.5-lp150.4.1.x86_64                                                            (1/3), 743.5 KiB (  1.8 MiB unpacked)
    Retrieving: dhcp-4.3.5-lp150.4.1.x86_64.rpm ................................................................................[done (14.6 KiB/s)]
    Retrieving package dhcp-server-4.3.5-lp150.4.1.x86_64                                                     (2/3), 948.2 KiB (  2.3 MiB unpacked)
    Retrieving: dhcp-server-4.3.5-lp150.4.1.x86_64.rpm ..........................................................................[done (2.1 MiB/s)]
    Retrieving package dhcp-client-4.3.5-lp150.4.1.x86_64                                                     (3/3), 787.6 KiB (  1.9 MiB unpacked)
    Retrieving: dhcp-client-4.3.5-lp150.4.1.x86_64.rpm ......................................................................................[done]
    Checking for file conflicts: ............................................................................................................[done]
    (1/3) Installing: dhcp-4.3.5-lp150.4.1.x86_64 ...........................................................................................[done]
    (2/3) Installing: dhcp-server-4.3.5-lp150.4.1.x86_64 ....................................................................................[done]
    Additional rpm output:
    Updating /etc/sysconfig/dhcpd ...
    Updating /etc/sysconfig/syslog ...                                                                                                             
                                                                                                                                                   
                                                                                                                                                   
    (3/3) Installing: dhcp-client-4.3.5-lp150.4.1.x86_64 ....................................................................................[done]
    RoutFire:~ #

  9. #9

    Default Re: LEAP 15 Yast -> software management stoped working after updates

    Well, that's interesting. I tried the same thing using sudo and nothing happened. In root it was loaded. OK, it appears I'll have to use commandline yast2 to configure the server. I learned a little here. Thanks. Hope all goes smoothly from here. Thanks

    Still not sure why this wouldn't work in software management when all three packages were selected.

    Bob

  10. #10

    Default Re: LEAP 15 Yast -> software management stoped working after updates

    Well now this is irritating...
    I type in (as root) yast2 dhcp-server
    and I get
    no such client module dhcp-server

    And, I've rechecked the spelling by me and other parties. And, of course DHCP-Server is not showing up in the YaST Control Center.
    Any ideas here would be gratefully received.

    Bob

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •