Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: Virtualbox does not reconfigure on kernel 4.20

  1. #11
    Join Date
    Jun 2008
    Blog Entries

    Default Re: Virtualbox does not reconfigure on kernel 4.20

    This is based on the git repo you pointed out, which is actually pointing at

    Build details are here;

    Install direct, or download and install. Since no repo key is added, just hit ignore for the moment
    zypper in
    Note in the past I had to add the following to the kernel boot options on my old HP system using the it87;

    If it all starts to work, then can look at adding a repo for you to add and it will update on a kernel update automatically...
    Cheers Malcolm °¿° SUSE Knowledge Partner (Linux Counter #276890)
    SUSE SLE, openSUSE Leap/Tumbleweed (x86_64) | GNOME DE
    If you find this post helpful and are logged into the web interface,
    please show your appreciation and click on the star below... Thanks!

  2. #12

    Default Re: Virtualbox does not reconfigure on kernel 4.20

    Thank you for your work in compiling the kernel module.

    After installing I get this after running lm-sensors and modprobe it87 force_id=0x8732:

    Adapter: PCI adapter
    Tdie: +33.8°C (high = +70.0°C)
    Tctl: +33.8°C

    Adapter: PCI adapter
    GPU core: +0.95 V (min = +0.95 V, max = +1.16 V)
    temp1: +38.0°C (high = +95.0°C, hyst = +3.0°C)
    (crit = +105.0°C, hyst = +5.0°C)
    (emerg = +135.0°C, hyst = +5.0°C)

    Adapter: ISA adapter
    in0: +0.49 V (min = +0.50 V, max = +1.62 V) ALARM
    in1: +2.53 V (min = +0.01 V, max = +0.41 V) ALARM
    in2: +2.04 V (min = +2.67 V, max = +1.51 V) ALARM
    +3.3V: +2.02 V (min = +0.46 V, max = +0.24 V) ALARM
    in4: +0.03 V (min = +2.38 V, max = +0.82 V) ALARM
    in5: +0.03 V (min = +1.67 V, max = +1.77 V) ALARM
    in6: +0.03 V (min = +0.72 V, max = +1.79 V) ALARM
    3VSB: +1.67 V (min = +1.13 V, max = +0.29 V) ALARM
    Vbat: +1.64 V
    fan1: 815 RPM (min = 11 RPM)
    fan3: 374 RPM (min = 38 RPM)
    temp1: +33.0°C (low = +93.0°C, high = -114.0°C) ALARM sensor = thermistor
    temp2: +30.0°C (low = -117.0°C, high = -121.0°C) ALARM sensor = Intel PECI
    temp3: +33.0°C (low = -65.0°C, high = -69.0°C) ALARM sensor = thermistor
    intrusion0: ALARM

    Adapter: ISA adapter
    cpu_fan: 0 RPM

    I still get only 2 fans out of the three fan headers and the speeds look wrong. I get three temps and the temps aren't right compared to the BIOS. I get no CPU fan speed. And the Tdie and Tctl temps are still ten degrees too low compared to the BIOS.

    I don't know, maybe whatever fix the guy did who patched the IT87 module was still not right - or maybe it was for a different sensor chip than he listed.

    As an aside, I turned off Precision Boost in the BIOS for the 2600X and my temps immediately dropped to around 35 degrees which is precisely where they should be given the stock cooler. And using ASUS TUI auto overclock to 3.8GHz, I get temps in the 44 degree range with spikes to 50-55 if Precision Boost is on, with lower voltages. It's clear to me now that ASUS has significantly over-volted this motherboard and that only undervolting the CPU voltage is likely to resolve my temperature issues.

    Thanks for your help, I really appreciate it, but I think we'll still have to wait for a real module to be written for the Super chip.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts