Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: SD card not mounting

  1. #11

    Default Re: SD card not mounting

    Quote Originally Posted by blaczero View Post
    I will find another to try, however like I said, this card worked on this laptop with Windows 10 installed, and the card still currently works on other laptops in linux and windows.
    Forgot I had one up stairs. Mounts fine.

    Code:
    137956.507029] mmc0: cannot verify signal voltage switch
    [137956.632366] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
    [137956.659994] mmcblk0: mmc0:aaaa SL32G 29.7 GiB 
    [137956.665852]  mmcblk0: p1

  2. #12
    Join Date
    Jun 2008
    Location
    Auckland, NZ
    Posts
    19,219
    Blog Entries
    1

    Default Re: SD card not mounting

    Quote Originally Posted by blaczero View Post
    I will find another to try, however like I said, this card worked on this laptop with Windows 10 installed, and the card still currently works on other laptops in linux and windows.
    As I suggested already, a likely driver issue, and perhaps your other laptops use different card reader hardware (apples and oranges). A bug report may be needed to help progress this.

    https://en.opensuse.org/openSUSE:Submitting_bug_reports

    or upstream....
    https://bugzilla.kernel.org/
    openSUSE Leap 15.0; KDE Plasma 5

  3. #13

    Default Re: SD card not mounting

    I've the same PCI-E card reader (i.e. RTS525A) and the same symptom with the same card.
    However I'm running Ubuntu 18.04!
    I can read the contents of the card with an USB card reader, only the builtin notebook card cardreader fails me.
    I can use the PCI cardreader to read SDHC cards, but not the 128GB SDXC card from SanDisk.

    Moreover I could successfully read the card in another Windows PC.

    @blaczero: what other Linux OSes did you have success with?
    So far I only tried Debian 9.6.0 and Ubuntu 18.10, but they produced the same error message.

    Quote Originally Posted by blaczero View Post
    This card mounts in Windows and other Linux OS's. Also, I had windows on this laptop and the card mounted fine. I installed tumbleweed (also tried leap) and the card will not mount, it gives the following in dmesg

    [ 1436.432277] mmc0: error -110 whilst initialising SD card
    [ 1437.772310] mmc0: error -110 whilst initialising SD card
    [ 1439.128040] mmc0: error -110 whilst initialising SD card

    fdisk -l shows nothing about the SD card.

    lspci -l is the following:

    00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (rev 08)
    00:02.0 VGA compatible controller: Intel Corporation Skylake GT2 [HD Graphics 520] (rev 07)
    00:04.0 Signal processing controller: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Thermal Subsystem (rev 08)
    00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
    00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
    00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
    00:16.3 Serial controller: Intel Corporation Device 9d3d (rev 21)
    00:17.0 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 21)
    00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 (rev f1)
    00:1c.5 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #6 (rev f1)
    00:1d.0 PCI bridge: Intel Corporation Device 9d1a (rev f1)
    00:1f.0 ISA bridge: Intel Corporation Sunrise Point-LP LPC Controller (rev 21)
    00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
    00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
    00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
    00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection I219-LM (rev 21)
    01:00.0 Network controller: Intel Corporation Wireless 8260 (rev 3a)
    02:00.0 Network controller: Intel Corporation Device 093c (rev 3a)
    03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS525A PCI Express Card Reader (rev 01)

    SD card is
    SanDisk Extreme 128GB SDXC UHS-I Card (SDSDXVF-128G-GNCIN) [Newest Version]


    OS version (latest Tumbleweed as of 12October2018)

    NAME="openSUSE Tumbleweed"
    # VERSION="20181009"
    ID="opensuse-tumbleweed"
    ID_LIKE="opensuse suse"
    VERSION_ID="20181009"
    PRETTY_NAME="openSUSE Tumbleweed"
    ANSI_COLOR="0;32"
    CPE_NAME="cpe:/opensuse:tumbleweed:20181009"
    BUG_REPORT_URL="https://bugs.opensuse.org"
    HOME_URL="https://www.opensuse.org/"

    Any ideas what else I could try?

  4. #14

    Default Re: SD card not mounting

    I've tried a few distros (the latest available Live ISO booted from a pendrive) and non of them managed to deal with the 128GB SanDisk SDXC card.
    1. CentOS-7-x86_64-LiveGNOME-1810.iso
    2. openSUSE-Tumbleweed-GNOME-Live-x86_64-Snapshot20181205-Media.iso
    3. openSUSE-Leap-15.0-GNOME-Live-x86_64-Snapshot20.107-Media.iso
    4. Fedora-Workstation-Live-x86_64-29-1.2.iso
    5. KNOPPIX_V8.2-2018-05-10-EN.iso


    Moreover I've tried the card in another (desktop) computer, an ASUS VIVOPC Mini (UN68U-BM012M).
    In Windows 10 the card is recognized and "mounted".

    Booting Ubuntu 18.04 (from a pendrive) I see the following with lsusb:
    Code:
    Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
    So the difference between this and my notebook's reader (which is the same as the reader of the OP) is that one is on the USB bus and has a modell name "RTS5129", the other is on the PCI bus and is an RTS525A.
    But the symptom (error message in syslog) is the same, the card is not recognized, no device file is created in /dev and card is not mounted.

    The driver in the case of the miniPC's reader is (via "usb-devices") "rtsx_usb":
    Code:
    T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=03 Dev#=  4 Spd=480 MxCh= 0
    D:  Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs=  1
    P:  Vendor=0bda ProdID=0129 Rev=39.60
    S:  Manufacturer=Generic
    S:  Product=USB2.0-CRW
    S:  SerialNumber=20100201396000000
    C:  #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
    I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=50 Driver=rtsx_usb
    So the same driver, but for the USB bus.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •